update_ref_for_cow() will BUG_ON() after it's call to
btrfs_lookup_extent_info() if no existing references are found.  Since refs
are computed directly from disk, this should be treated as a corruption
instead of a logic error.
Signed-off-by: Mark Fasheh <mfasheh@suse.de>

All callers of __finish_chunk_alloc() BUG_ON() return value, so it's trivial
for us to always bubble up any errors caught in __finish_chunk_alloc() to be
caught there.
Signed-off-by: Mark Fasheh <mfasheh@suse.de>

Unfortunately it isn't enough to just exit here - the kzalloc() happens in a
loop and the allocated items are added to a linked list whose head is passed
in from the caller.

To fix the BUG_ON() and also provide the semantic that the list passed in is
only modified on success, I create function-local temporary list that we add
items too. If no error is met, that list is spliced to the callers at the
end of the function. Otherwise the list will be walked and all items freed
before the error value is returned.

I did a simple test on this patch by forcing an error at the kzalloc() point
and verifying that when this hits (git clone seemed to exercise this), the
function throws the proper error. Unfortunately but predictably, we later
hit a BUG_ON(ret) type line that still hasn't been fixed up ;)
Signed-off-by: Mark Fasheh <mfasheh@suse.com>

The only caller of update_ref_for_cow() is __btrfs_cow_block() which was
originally ignoring any return values. update_ref_for_cow() however doesn't
look like a candidate to become a void function - there are a few places
where errors can occur.

So instead I changed update_ref_for_cow() to bubble all errors up (instead
of BUG_ON). __btrfs_cow_block() was then updated to catch and BUG_ON() any
errors from update_ref_for_cow(). The end effect is that we have no change
in behavior, but about 8 different places where a BUG_ON(ret) was removed.

Obviously a future patch will have to address the BUG_ON() in
__btrfs_cow_block().
Signed-off-by: Mark Fasheh <mfasheh@suse.de>

This is called from only one place - create_subvol() which passes errors
safely back out to it's caller, btrfs_mksubvol where they are handled.

Additionally, btrfs_create_subvol_root() itself bug's needlessly from error
return of btrfs_update_inode(). Since create_subvol() was fixed to catch
errors we can bubble this one up too.
Signed-off-by: Mark Fasheh <mfasheh@suse.com>

Commit cb1b69f4 (Btrfs: forced readonly when btrfs_drop_snapshot() fails)
made btrfs_drop_snapshot return void because there were no callers checking
the return value. That is the wrong order to handle error propogation since
the caller will have no idea that an error has occured and continue on
as if nothing went wrong.
Signed-off-by: Jeff Mahoney <jeffm@suse.com>

 set_extent_bit can do exclusive locking but only when called by lock_extent*,

 Drop the exclusive bits argument except when called by lock_extent.
Signed-off-by: Jeff Mahoney <jeffm@suse.com>

 lock_extent and unlock_extent are always called with GFP_NOFS, drop the
 argument and use GFP_NOFS consistently.
Signed-off-by: Jeff Mahoney <jeffm@suse.com>

Signed-off-by: Jeff Mahoney <jeffm@suse.com>

This patch pushes kmalloc errors up to the caller and BUGs in the caller.

The BUG_ON for duplicate reloc tree root insertion is replaced with a
panic explaining the issue.
Signed-off-by: Jeff Mahoney <jeffm@suse.com>

This pushes failures from the submit_bio_hook callbacks,
btrfs_submit_bio_hook and btree_submit_bio_hook into the callers, including
callers of submit_one_bio where it catches the failures with BUG_ON.

It also pushes up through the ->readpage_io_failed_hook to
end_bio_extent_writepage where the error is already caught with BUG_ON.
Signed-off-by: Jeff Mahoney <jeffm@suse.com>

In submit_extent_page, there's a visually noisy if statement that, in
the midst of other conditions, does the tree dependency for tree->ops
and tree->ops->merge_bio_hook before calling it, and then another
condition afterwards. If an error is returned from merge_bio_hook,
there's no way to catch it. It's considered a routine "1" return
value instead of a failure.

This patch factors out the dependency check into a new local merge_bio
routine and BUG's on an error. The if statement is less noisy as a side-
effect.
Signed-off-by: Jeff Mahoney <jeffm@suse.com>

btrfs_submit_bio_hook currently calls btrfs_bio_wq_end_io in either case
of an if statement that determines one of the arguments.

This patch moves the function call outside of the if statement and uses it
to only determine the different argument. This allows us to catch an
error in one place in a more visually obvious way.
Signed-off-by: Jeff Mahoney <jeffm@suse.com>

btrfs_update_root BUG's when it can't alloc a path, yet it can recover
from a search error. This patch returns -ENOMEM instead.
Signed-off-by: Jeff Mahoney <jeffm@suse.com>

find_and_setup_root BUGs when it encounters an error from
btrfs_find_last_root, which can occur if a path can't be allocated.

This patch pushes it up to its callers where it is already handled.
Signed-off-by: Jeff Mahoney <jeffm@suse.com>

There is only one caller of clear_extent_bit that checks the return value
and it only checks if it's negative. Since there are no users of the
returned bits functionality of clear_extent_bit, stop returning it
and avoid complicating error handling.
Signed-off-by: Jeff Mahoney <jeffm@suse.com>

 __find_space_info can return NULL but we don't check it before calling
 dump_space_info().
Signed-off-by: Jeff Mahoney <jeffm@suse.com>

 The only error condition in clean_tree_block is an accounting bug.
 Returning without modifying dirty_metadata_bytes and as if the cleaning
 as been performed may cause problems later so it should panic instead.

 It should probably be a BUG_ON but we have btrfs_panic now.
Signed-off-by: Jeff Mahoney <jeffm@suse.com>

btrfs_insert_root is just a wrapper for btrfs_insert_item. Just return
the error directly.
Signed-off-by: Jeff Mahoney <jeffm@suse.com>

Correctness fix: The kfree calls in the add_delayed_* functions free
the node that's passed into it, but the node is a member of another
structure. It works because it's always the first member of the
containing structure, but it should really be using the containing
structure itself.
Signed-off-by: Jeff Mahoney <jeffm@suse.com>

The ordered data and relocation trees have BUG_ONs to protect against
bad tree operations.

This patch replaces them with a panic that will report the problem.
Signed-off-by: Jeff Mahoney <jeffm@suse.com>

The *_state functions can only return 0 or -EEXIST. This patch addresses
the cases where those functions returning -EEXIST represent a locking
failure. It handles them by panicking with an appropriate error message.
Signed-off-by: Jeff Mahoney <jeffm@suse.com>

As part of the effort to eliminate BUG_ON as an error handling
technique, we need to determine which errors are actual logic errors,
which are on-disk corruption, and which are normal runtime errors
e.g. -ENOMEM.

Annotating these error cases is helpful to understand and report them.

This patch adds a btrfs_panic() routine that will either panic
or BUG depending on the new -ofatal_errors={panic,bug} mount option.
Since there are still so many BUG_ONs, it defaults to BUG for now but I
expect that to change once the error handling effort has made
significant progress.
Signed-off-by: Jeff Mahoney <jeffm@suse.com>

Commit 28d82dc1 ("epoll: limit paths") that I did to limit the
number of possible wakeup paths in epoll is causing a few applications
to longer work (dovecot for one).

The original patch is really about limiting the amount of epoll nesting
(since epoll fds can be attached to other fds). Thus, we probably can
allow an unlimited number of paths of depth 1. My current patch limits
it at 1000. And enforce the limits on paths that have a greater depth.

This is captured in: https://bugzilla.redhat.com/show_bug.cgi?id=681578Signed-off-by: Jason Baron <jbaron@redhat.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Pull networking changes from David Miller:
 "1) icmp6_dst_alloc() returns NULL instead of ERR_PTR() leading to
     crashes, particularly during shutdown.  Reported by Dave Jones and
     fixed by Eric Dumazet.

  2) hyperv and wimax/i2400m return NETDEV_TX_BUSY when they have
     already freed the SKB, which causes crashes as to the caller this
     means requeue the packet.  Fixes from Eric Dumazet.

  3) usbnet driver doesn't allocate the right amount of headroom on
     fresh RX SKBs, fix from Eric Dumazet.

  4) Fix regression in ip6_mc_find_dev_rcu(), as an RCU lookup it
     abolutely should not take a reference to 'dev', this leads to
     leaks.  Fix from RonQing Li.

  5) Fix netfilter ctnetlink race between delete and timeout expiration.
     From Pablo Neira Ayuso.

  6) Revert SFQ change which causes regressions, specifically queueing
     to tail can lead to unavoidable flow starvation.  From Eric
     Dumazet.

  7) Fix a memory leak and a crash on corrupt firmware files in bnx2x,
     from Michal Schmidt."

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net:
  netfilter: ctnetlink: fix race between delete and timeout expiration
  ipv6: Don't dev_hold(dev) in ip6_mc_find_dev_rcu.
  wimax/i2400m: fix erroneous NETDEV_TX_BUSY use
  net/hyperv: fix erroneous NETDEV_TX_BUSY use
  net/usbnet: reserve headroom on rx skbs
  bnx2x: fix memory leak in bnx2x_init_firmware()
  bnx2x: fix a crash on corrupt firmware file
  sch_sfq: revert dont put new flow at the end of flows
  ipv6: fix icmp6_dst_alloc()

Pull perf fixes from Ingo Molnar.

* 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  perf tools, x86: Build perf on older user-space as well
  perf tools: Use scnprintf where applicable
  perf tools: Incorrect use of snprintf results in SEGV

Kerin Millar reported hardlockups while running `conntrackd -c'
in a busy firewall. That system (with several processors) was
acting as backup in a primary-backup setup.

After several tries, I found a race condition between the deletion
operation of ctnetlink and timeout expiration. This patch fixes
this problem.
Tested-by: Kerin Millar <kerframil@gmail.com>
Reported-by: Kerin Millar <kerframil@gmail.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

ip6_mc_find_dev_rcu() is called with rcu_read_lock(), so don't
need to dev_hold().
With dev_hold(), not corresponding dev_put(), will lead to leak.

[ bug introduced in 96b52e61 (ipv6: mcast: RCU conversions) ]
Signed-off-by: RongQing.Li <roy.qing.li@gmail.com>
Acked-by: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Merge some more email patches from Andrew Morton:
 "A couple of nilfs fixes"

* emailed from Andrew Morton <akpm@linux-foundation.org>:
  nilfs2: fix NULL pointer dereference in nilfs_load_super_block()
  nilfs2: clamp ns_r_segments_percentage to [1, 99]

According to the report from Slicky Devil, nilfs caused kernel oops at
nilfs_load_super_block function during mount after he shrank the
partition without resizing the filesystem:

 BUG: unable to handle kernel NULL pointer dereference at 00000048
 IP: [<d0d7a08e>] nilfs_load_super_block+0x17e/0x280 [nilfs2]
 *pde = 00000000
 Oops: 0000 [#1] PREEMPT SMP
 ...
 Call Trace:
  [<d0d7a87b>] init_nilfs+0x4b/0x2e0 [nilfs2]
  [<d0d6f707>] nilfs_mount+0x447/0x5b0 [nilfs2]
  [<c0226636>] mount_fs+0x36/0x180
  [<c023d961>] vfs_kern_mount+0x51/0xa0
  [<c023ddae>] do_kern_mount+0x3e/0xe0
  [<c023f189>] do_mount+0x169/0x700
  [<c023fa9b>] sys_mount+0x6b/0xa0
  [<c04abd1f>] sysenter_do_call+0x12/0x28
 Code: 53 18 8b 43 20 89 4b 18 8b 4b 24 89 53 1c 89 43 24 89 4b 20 8b 43
 20 c7 43 2c 00 00 00 00 23 75 e8 8b 50 68 89 53 28 8b 54 b3 20 <8b> 72
 48 8b 7a 4c 8b 55 08 89 b3 84 00 00 00 89 bb 88 00 00 00
 EIP: [<d0d7a08e>] nilfs_load_super_block+0x17e/0x280 [nilfs2] SS:ESP 0068:ca9bbdcc
 CR2: 0000000000000048

This turned out due to a defect in an error path which runs if the
calculated location of the secondary super block was invalid.

This patch fixes it and eliminates the reported oops.
Reported-by: Slicky Devil <slicky.dvl@gmail.com>
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
Tested-by: Slicky Devil <slicky.dvl@gmail.com>
Cc: <stable@vger.kernel.org>	[2.6.30+]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

ns_r_segments_percentage is read from the disk.  Bogus or malicious
value could cause integer overflow and malfunction due to meaningless
disk usage calculation.  This patch reports error when mounting such
bogus volumes.
Signed-off-by: Haogang Chen <haogangchen@gmail.com>
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Pull maintainer update from James Morris:
 "Please pull this patch which adds Serge as maintainer of the
  capabilities code, as discussed on lwn and the lsm list.

  New capabilities must be signed off by the maintainer, and new uses of
  any capabilities should at be cc'd to the maintainer."

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security:
  MAINTAINERS: Add Serge as maintainer of capabilities

Pull c6x bugfix from Mark Salter:
 "Remove dead code from entry.S which causes a build failure when using
  a newer assembler (v2.22 complains about it, v2.20 ignores it)."

* tag 'for-linus' of git://linux-c6x.org/git/projects/linux-c6x-upstreaming:
  C6X: remove dead code from entry.S

When writing files to afs I sometimes hit a BUG:

kernel BUG at fs/afs/rxrpc.c:179!

With a backtrace of:

	afs_free_call
	afs_make_call
	afs_fs_store_data
	afs_vnode_store_data
	afs_write_back_from_locked_page
	afs_writepages_region
	afs_writepages

The cause is:

	ASSERT(skb_queue_empty(&call->rx_queue));

Looking at a tcpdump of the session the abort happens because we
are exceeding our disk quota:

	rx abort fs reply store-data error diskquota exceeded (32)

So the abort error is valid. We hit the BUG because we haven't
freed all the resources for the call.

By freeing any skbs in call->rx_queue before calling afs_free_call
we avoid hitting leaking memory and avoid hitting the BUG.
Signed-off-by: Anton Blanchard <anton@samba.org>
Signed-off-by: David Howells <dhowells@redhat.com>
Cc: <stable@kernel.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

A read of a large file on an afs mount failed:

# cat junk.file > /dev/null
cat: junk.file: Bad message

Looking at the trace, call->offset wrapped since it is only an
unsigned short. In afs_extract_data:

        _enter("{%u},{%zu},%d,,%zu", call->offset, len, last, count);
...

        if (call->offset < count) {
                if (last) {
                        _leave(" = -EBADMSG [%d < %zu]", call->offset, count);
                        return -EBADMSG;
                }

Which matches the trace:

[cat   ] ==> afs_extract_data({65132},{524},1,,65536)
[cat   ] <== afs_extract_data() = -EBADMSG [0 < 65536]

call->offset went from 65132 to 0. Fix this by making call->offset an
unsigned int.
Signed-off-by: Anton Blanchard <anton@samba.org>
Signed-off-by: David Howells <dhowells@redhat.com>
Cc: <stable@kernel.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

The ENDPROC() on sys_fadvise64_c6x() in arch/c6x/kernel/entry.S is
outside of the conditional block with the matching ENTRY() macro. This
leads a newer (v2.22 vs. v2.20) assembler to complain:

  /tmp/ccGZBaPT.s: Assembler messages:
  /tmp/ccGZBaPT.s: Error: .size expression for sys_fadvise64_c6x does not evaluate to a constant

The conditional block became dead code when c6x switched to generic
unistd.h and should be removed along with the offending ENDPROC().
Signed-off-by: Mark Salter <msalter@redhat.com>
Acked-by: David Howells <dhowells@redhat.com>

A driver start_xmit() method cannot free skb and return NETDEV_TX_BUSY,
since caller is going to reuse freed skb.

In fact netif_tx_stop_queue() / netif_stop_queue() is needed before
returning NETDEV_TX_BUSY or you can trigger a ksoftirqd fatal loop.

In case of memory allocation error, only safe way is to drop the packet
and return NETDEV_TX_OK

Also increments tx_dropped counter
Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com>
Cc: Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

A driver start_xmit() method cannot free skb and return NETDEV_TX_BUSY,
since caller is going to reuse freed skb.

This is mostly a revert of commit bf769375 (staging: hv: fix the return
status of netvsc_start_xmit())

In fact netif_tx_stop_queue() / netif_stop_queue() is needed before
returning NETDEV_TX_BUSY or you can trigger a ksoftirqd fatal loop.

In case of memory allocation error, only safe way is to drop the packet
and return NETDEV_TX_OK
Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com>
Cc: "K. Y. Srinivasan" <kys@microsoft.com>
Cc: Haiyang Zhang <haiyangz@microsoft.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Reviewed-by: Haiyang Zhang <haiyangz@microsoft.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

network drivers should reserve some headroom on incoming skbs so that we
dont need expensive reallocations, eg forwarding packets in tunnels.

This NET_SKB_PAD padding is done in various helpers, like
__netdev_alloc_skb_ip_align() in this patch, combining NET_SKB_PAD and
NET_IP_ALIGN magic.
Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com>
Cc: Oliver Neukum <oneukum@suse.de>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Acked-by: Oliver Neukum <oneukum@suse.de>
Signed-off-by: David S. Miller <davem@davemloft.net>