- 15 Nov, 2007 36 commits
-
-
Ondrej Zary authored
The pf driver for parallel port floppy drives seems to be broken. At least with Imation SuperDisk with EPAT chip, the driver calls pi_connect() and pi_disconnect after each transferred sector. At least with EPAT, this operation is very expensive - causes drive recalibration. Thus, transferring even a single byte (dd if=/dev/pf0 of=/dev/null bs=1 count=1) takes 20 seconds, making the driver useless. The pf_next_buf() function seems to be broken as it returns 1 always (except when pf_run is non-zero), causing the loop in do_pf_read_drq (and do_pf_write_drq) to be executed only once. The following patch fixes this problem. It also fixes swapped descriptions in pf_lock() function and removes DBMSG macro, which seems useless. Signed-off-by:
Ondrej Zary <linux@rainbow-software.org> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Atsushi Nemoto authored
Some error paths in txx9spi_probe wrongly return 0. This patch fixes them by using the devres interfaces. Signed-off-by:
Atsushi Nemoto <anemo@mba.ocn.ne.jp> Acked-by:
David Brownell <david-b@pacbell.net> Signed-off-by:
-
Atsushi Nemoto authored
After 49dce689, device_for_each_child iteration hits the master device itself. Do not call spi_unregister_device() for the master device. Signed-off-by:
-
Andrew Morton authored
Zillions of people are getting my-battery-monitor-doesnt-work problems (including me). Lessen the damage by making ACPI_PROCFS default to on. Cc: Len Brown <lenb@kernel.org> Cc: "Rafael J. Wysocki" <rjw@sisk.pl> Acked-by:
Ingo Molnar <mingo@elte.hu> Signed-off-by:
-
Yasunori Goto authored
i386 and x86-64 registers System RAM as IORESOURCE_MEM | IORESOURCE_BUSY. But ia64 registers it as IORESOURCE_MEM only. In addition, memory hotplug code registers new memory as IORESOURCE_MEM too. This difference causes a failure of memory unplug of x86-64. This patch fixes it. This patch adds IORESOURCE_BUSY to avoid potential overlap mapping by PCI device. Signed-off-by:
Yasunori Goto <y-goto@jp.fujitsu.com> Signed-off-by:
Badari Pulavarty <pbadari@us.ibm.com> Cc: Luck, Tony" <tony.luck@intel.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@elte.hu> Signed-off-by:
-
Peter Zijlstra authored
We allow violation of bdi limits if there is a lot of room on the system. Once we hit half the total limit we start enforcing bdi limits and bdi ramp-up should happen. Doing it this way avoids many small writeouts on an otherwise idle system and should also speed up the ramp-up. Signed-off-by:
Peter Zijlstra <a.p.zijlstra@chello.nl> Reviewed-by:
Fengguang Wu <wfg@mail.ustc.edu.cn> Signed-off-by:
-
Balbir Singh authored
Update the getdelays utility to become cgroupstats aware. A new -C option has been added. It takes in a control group path and prints out a summary of the states of tasks in the control group Signed-off-by:
Balbir Singh <balbir@linux.vnet.ibm.com> Signed-off-by:
-
KAMEZAWA Hiroyuki authored
We should unset migrate type "ISOLATE" when we successfully removed memory. But current code has BUG and cannot works well. This patch also includes bugfix? to change get_pageblock_flags to get_pageblock_migratetype(). Thanks to Badari Pulavarty for finding this. Signed-off-by:
KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Acked-by:
-
Lee Schermerhorn authored
We hit the BUG_ON() in mm/rmap.c:vma_address() when trying to migrate via mbind(MPOL_MF_MOVE) a non-anon region that spans multiple vmas. For anon-regions, we just fail to migrate any pages beyond the 1st vma in the range. This occurs because do_mbind() collects a list of pages to migrate by calling check_range(). check_range() walks the task's mm, spanning vmas as necessary, to collect the migratable pages into a list. Then, do_mbind() calls migrate_pages() passing the list of pages, a function to allocate new pages based on vma policy [new_vma_page()], and a pointer to the first vma of the range. For each page in the list, new_vma_page() calls page_address_in_vma() passing the page and the vma [first in range] to obtain the address to get for alloc_page_vma(). The page address is needed to get interleaving policy correct. If the pages in the list come from multiple vmas, eventually, new_page_address() will pass that page to page_address_in_vma() with the incorrect vma. For !PageAnon pages, this will result in a bug check in rmap.c:vma_address(). For anon pages, vma_address() will just return EFAULT and fail the migration. This patch modifies new_vma_page() to check the return value from page_address_in_vma(). If the return value is EFAULT, new_vma_page() searchs forward via vm_next for the vma that maps the page--i.e., that does not return EFAULT. This assumes that the pages in the list handed to migrate_pages() is in address order. This is currently case. The patch documents this assumption in a new comment block for new_vma_page(). If new_vma_page() cannot locate the vma mapping the page in a forward search in the mm, it will pass a NULL vma to alloc_page_vma(). This will result in the allocation using the task policy, if any, else system default policy. This situation is unlikely, but the patch documents this behavior with a comment. Note, this patch results in restarting from the first vma in a multi-vma range each time new_vma_page() is called. If this is not acceptable, we can make the vma argument a pointer, both in new_vma_page() and it's caller unmap_and_move() so that the value held by the loop in migrate_pages() always passes down the last vma in which a page was found. This will require changes to all new_page_t functions passed to migrate_pages(). Is this necessary? For this patch to work, we can't bug check in vma_address() for pages outside the argument vma. This patch removes the BUG_ON(). All other callers [besides new_vma_page()] already check the return status. Tested on x86_64, 4 node NUMA platform. Signed-off-by:
Lee Schermerhorn <lee.schermerhorn@hp.com> Acked-by:
Christoph Lameter <clameter@sgi.com> Signed-off-by:
-
Eric W. Biederman authored
It appears we overlooked support for removing generic proc files when we added support for multiple proc super blocks. Handle that now. [akpm@linux-foundation.org: coding-style cleanups] Signed-off-by:
Eric W. Biederman <ebiederm@xmission.com> Acked-by:
Pavel Emelyanov <xemul@openvz.org> Cc: Alexey Dobriyan <adobriyan@sw.ru> Acked-by:
Sukadev Bhattiprolu <sukadev@us.ibm.com> Signed-off-by:
-
Damian Jurd authored
The following is an extra entry to enable the touch screen on the new LG C1 EXPRESS DUAL machine. Cc: Russell King <rmk@arm.linux.org.uk> Cc: Bjorn Helgaas <bjorn.helgaas@hp.com> Signed-off-by:
-
Adrian Bunk authored
This patch fixes the possible usage of a negative value as an array index spotted by the Coverity checker. sisfb_validate_mode() could return a negative error code and we must check for that prior to using its return value as an array index. Signed-off-by:
Adrian Bunk <bunk@kernel.org> Cc: Thomas Winischhofer <thomas@winischhofer.net> Cc: "Antonino A. Daplas" <adaplas@pol.net> Signed-off-by:
-
Adrian Bunk authored
This patch fixes a memory leak spotted by the Coverity checker. Signed-off-by:
-
Jordan Crouse authored
A relatively recent version of the Geode LX datasheet listed the wrong address for one of the MSRs that controls TFT panels, resulting in breakage. This patch corrects the MSR address. Signed-off-by:
Jordan Crouse <jordan.crouse@amd.com> Cc: "Antonino A. Daplas" <adaplas@pol.net> Cc: "H. Peter Anvin" <hpa@zytor.com> Signed-off-by:
-
Jan Kara authored
Forbid user from changing file flags on quota files. User has no bussiness in playing with these flags when quota is on. Furthermore there is a remote possibility of deadlock due to a lock inversion between quota file's i_mutex and transaction's start (i_mutex for quota file is locked only when trasaction is started in quota operations) in ext3 and ext4. Signed-off-by:
Jan Kara <jack@suse.cz> Cc: LIOU Payphone <lioupayphone@gmail.com> Cc: <linux-ext4@vger.kernel.org> Acked-by:
Dave Kleikamp <shaggy@austin.ibm.com> Cc: <reiserfs-dev@namesys.com> Signed-off-by:
-
Stanislav Brabec authored
Attached patch fixes two compilation problems of s1d13xxxfb.c: - Fixes outdated dbg() message to fix compilation error with debugging enabled. - Do not read kernel command line options when compiled as module. Signed-off-by:
Stanislav Brabec <utx@penguin.cz> Cc: "Antonino A. Daplas" <adaplas@pol.net> Signed-off-by:
-
Diego Calleja authored
When I boot with the 'quiet' parameter, I see on the screen: [ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 39.036026] Initializing cgroup subsys cpuacct [ 39.036080] Initializing cgroup subsys debug [ 39.036118] Initializing cgroup subsys ns This patch lowers the priority of those messages, adds a "cgroup: " prefix to another couple of printks and kills the useless reference to the source file. Signed-off-by:
Diego Calleja <diegocg@gmail.com> Cc: Paul Menage <menage@google.com> Signed-off-by:
-
Jeff Dike authored
pud_clear wasn't setting the _PAGE_NEWPAGE bit, fooling tlb_flush into thinking that this area of the address space was up-to-date and not unmapping whatever was covered by the pud. This manifested itself as ldconfig on x86_64 complaining about the first library it looked at not being a valid ELF file. A config file is mapped at 0x4000000, as the only thing mapped under its pud, and unmapped. The unmapping caused a pud_clear, which, due to this bug, didn't actually unmap the config file data on the host. The first library is then mapped at the same location, but is not actually mapped on the host because accesses to it cause no page faults. As a result, ldconfig sees the old config file data. [akpm@linux-foundation.org: coding-style cleanups] Signed-off-by:
Jeff Dike <jdike@linux.intel.com> Signed-off-by:
-
Jeff Dike authored
Stupid bug - we need to compare the return value of recvmsg to the value of iov_len, not its size. This caused port_helper processes not to be killed on shutdown on x86_64 because the pids weren't being passed out properly. Signed-off-by:
-
Philippe Elie authored
Instruction pointer returned by profile_pc() can be a random value. This break the assumption than we can safely set struct op_sample.eip field to a magic value to signal to the per-cpu buffer reader side special event like task switch ending up in a segfault in get_task_mm() when profile_pc() return ~0UL. Fixed by sanitizing the sampled eip and reject/log invalid eip. Problem reported by Sami Farin, patch tested by him. Signed-off-by:
Philippe Elie <phil.el@wanadoo.fr> Tested-by:
Sami Farin <safari-kernel@safari.iki.fi> Cc: <stable@kernel.org> Signed-off-by:
-
Frank Lichtenheld authored
Variables that are only used in #ifdef CONFIG_X86 should also only be declared there. Signed-off-by:
Frank Lichtenheld <frank@lichtenheld.de> Cc: Michal Januszewski <spock@gentoo.org> Cc: "Antonino A. Daplas" <adaplas@pol.net> Signed-off-by:
-
Randy Dunlap authored
chipsfb uses PCI interfaces and should depend on PCI. CC drivers/video/chipsfb.o drivers/video/chipsfb.c: In function 'chipsfb_pci_init': drivers/video/chipsfb.c:378: error: implicit declaration of function 'pci_request_region' drivers/video/chipsfb.c:435: error: implicit declaration of function 'pci_release_region' make[2]: *** [drivers/video/chipsfb.o] Error 1 make[1]: *** [drivers/video] Error 2 make: *** [drivers] Error 2 !CONFIG_PCI causes the build to fail. Signed-off-by:
Randy Dunlap <randy.dunlap@oracle.com> Cc: Kamalesh Babulal <kamalesh@linux.vnet.ibm.com> Signed-off-by:
-
Mike Frysinger authored
The max_user_freq member is not really meant for RTC drivers to modify, so update the rtc documentation so drivers writers know what is expected of them when handling periodic events. Signed-off-by:
Mike Frysinger <vapier@gentoo.org> Acked-by:
Alessandro Zummo <a.zummo@towertech.it> Cc: David Brownell <david-b@pacbell.net> Signed-off-by:
-
Jeff Dike authored
symlinks to directories in the non-O= case were lacking -n, which meant that, when the link already existed, a new link pointing at itself was created in the target directory. Signed-off-by:
-
Paul Mundt authored
mac80211 has a reference to __bitmap_empty() via bitmap_empty(). In lib/bitmap.c this is flagged with an EXPORT_SYMBOL(), but this is ultimately ineffective due to bitmap.o being linked in lib-y, resulting in: ERROR: "__bitmap_empty" [net/mac80211/mac80211.ko] undefined! Moving bitmap.o to obj-y fixes this up. Signed-off-by:
Paul Mundt <lethal@linux-sh.org> Cc: "John W. Linville" <linville@tuxdriver.com> Signed-off-by:
-
Pascal Terjan authored
When PCMCIA_DEBUG is set, cm40x0_cs.c and cm4000_cs.c don't build because the definition of reader_to_dev uses a non-existent handle field of the struct pcmcia_device in the call to handle_to_dev. As handle_to_dev works on struct pcmcia_device, the fix is quite trivial. Signed-off-by:
Pascal Terjan <pterjan@mandriva.com> Cc: Harald Welte <laforge@gnumonks.org> Signed-off-by:
-
Tetsuo Handa authored
Original patch assumed args->nlen < CTL_MAXNAME, but it can be false. Signed-off-by:
Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Signed-off-by:
-
Bjorn Helgaas authored
This should resolve these bug reports of the modem not working: http://bugzilla.kernel.org/show_bug.cgi?id=4355 http://www.linuxquestions.org/questions/linux-newbie-8/connect-script-failed-on-ppp-go-123975/ I don't have hardware to test this, but the initial report in the kernel bugzilla indicates that this change fixed the problem. Signed-off-by:Bjorn Helgaas <bjorn.helgaas@hp.com> Cc: Dmitry Vavilov <vavilov@ihep.ru> Signed-off-by:
-
Akinobu Mita authored
This patch fixes wrong array index in allocation failure handling. Cc: Pekka Enberg <penberg@cs.helsinki.fi> Acked-by:
Akinobu Mita <akinobu.mita@gmail.com> Signed-off-by:
-
Li Zefan authored
The size argument passed to memset is wrong. Signed-off-by Li Zefan <lizf@cn.fujitsu.com> Acked-by:
Evgeniy Polyakov <johnpol@2ka.mipt.ru> Signed-off-by:
-
Li Zefan authored
The size passed to memset is wrong. Signed-off-by Li Zefan <lizf@cn.fujitsu.com> Acked-by:
Geert Uytterhoeven <Geert.Uytterhoeven@sonycom.com> Cc: <stable@kernel.org> Signed-off-by:
-
David Brownell authored
Export the NVRAM on DS1307 and DS1338 chips, like several of the other drivers do for such combination RTC-and-NVRAM chips. Signed-off-by:
David Brownell <dbrownell@users.sourceforge.net> Acked-by:
-
David Brownell authored
Several of the RTC drivers are exporting binary "nvram" files in sysfs. Such NVRAM (or on many systems, EEPROM) data is often initialized during system manufacture to hold data about identity (serial numbers, Ethernet addresses, etc), configuration, calibration, and so forth. This patch improves integrity and security of those files: - Correctly initializes the size in one of the two cases where that was not yet being done. - Improves system security/integrity by making this state not be world-writable by default. Letting arbitrary userspace code mangle such state by default is at least Not A Good Thing; and it could sometimes be worse, depending on the particular data that might be corrupted. (I disregard the paranoiac "don't let anyone read it either" approach. Anyone storing passwords in such memory doesn't really care about security.) Signed-off-by: -
David Brownell authored
The RTC "hctosys" mechanism expects that RTC clock will use UTC, not local time (e.g. PST). Say so in Kconfig and in the kernel message. (Strictly speaking, the RTC clock should be tracking the POSIX epoch. That's not worth going into here. Goofing timezones means clocks are wrong by many hours; the POSIX-v-UTC differences just cost seconds.) Signed-off-by:
-
Andrey Borzenkov authored
When backlight_device_register() fails, return after undo initialization, do not try to use pointer that just was reset to NULL This fixes this oops: [ 1595.177672] [<c010480a>] show_trace_log_lvl+0x1a/0x30 [ 1595.177706] [<c01052a2>] show_trace+0x12/0x20 [ 1595.177718] [<c0105305>] dump_stack+0x15/0x20 [ 1595.177728] [<c01c9375>] kobject_shadow_add+0x125/0x1c0 [ 1595.177754] [<c01c941a>] kobject_add+0xa/0x10 [ 1595.177764] [<c0239a37>] device_add+0x97/0x5d0 [ 1595.177776] [<c0239f82>] device_register+0x12/0x20 [ 1595.177786] [<dfd912df>] backlight_device_register+0x9f/0x110 [backlight] [ 1595.177814] [<df861117>] toshiba_acpi_init+0x117/0x15e [toshiba_acpi] [ 1595.177834] [<c013e28d>] sys_init_module+0xfd/0x14e0 [ 1595.177871] [<c0104112>] sysenter_past_esp+0x5f/0x99 [ 1595.177883] ======================= [ 1595.177890] Could not register toshiba backlight device [ 1595.177985] BUG: unable to handle kernel NULL pointer dereference at virtual address 00000004 ... [ 1595.394097] EIP: 0060:[<df861143>] Not tainted VLI [ 1595.394101] EFLAGS: 00010282 (2.6.23-rc9-1avb #24) [ 1595.480081] EIP is at toshiba_acpi_init+0x143/0x15e [toshiba_acpi] Signed-off-by:
Andrey Borzenkov <arvidjaar@mail.ru> Cc: John Belmonte <toshiba_acpi@memebeam.org> Acked-by:
Richard Purdie <rpurdie@rpsys.net> Signed-off-by:
-
Michael Halcrow authored
page->index should be cast to loff_t instead of off_t. Signed-off-by:
Michael Halcrow <mhalcrow@us.ibm.com> Reported-by:
Eric Sandeen <sandeen@redhat.com> Signed-off-by:
-
- 13 Nov, 2007 4 commits
-
-
Bartlomiej Zolnierkiewicz authored
Signed-off-by:Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
-
Bartlomiej Zolnierkiewicz authored
Signed-off-by: -
Bartlomiej Zolnierkiewicz authored
Fix ide-cris, cs5530, sc1200 and sis5513 host drivers to just return instead of OOPS-ing for unsupported modes in ->set_dma_mode methods. Acked-by:
Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by:
-
Bartlomiej Zolnierkiewicz authored
Use drive->select.all for REQ_TYPE_ATA_TASK requests in execute_drive_cmd() (the obsolete bits 7 and 5 of the Device register need to be set). Signed-off-by:
-
