- 18 Dec, 2016 13 commits
-
-
Daniel Vetter authored
If we're unlucky then the registration from a hotplugged connector might race with the final registration step on driver load. And since MST topology discover is asynchronous that's even somewhat likely. v2: Also update the kerneldoc for @registered! v3: Review from Chris: - Improve kerneldoc for late_register/early_unregister callbacks. - Use mutex_destroy. Reviewed-by:
Chris Wilson <chris@chris-wilson.co.uk> Cc: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by:
Sean Paul <seanpaul@chromium.org> Reported-by:
Daniel Vetter <daniel.vetter@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/20161218133545.2106-1-daniel.vetter@ffwll.ch
-
Daniel Vetter authored
Only static connectors should be left at this point, and we should be able to clean them out by simply dropping that last reference still around from drm_connector_init. If that leaves anything behind then we have a driver bug. Doing the final cleanup this way also allows us to use drm_connector_iter, removing the very last place where we walk connector_list explicitly in drm core&helpers. Reviewed-by:
Harry Wentland <harry.wentland@amd.com> Reviewed-by:
-
Daniel Vetter authored
Mostly nothing special (except making sure that really all error paths and friends call iter_put). v2: Don't forget the raw connector_list walking in drm_helper_move_panel_connectors_to_head. That one unfortunately can't be converted to the iterator helpers, but since it's just some list splicing best to just wrap the entire thing up in one critical section. v3: Bail out after iter_put (Harry). Cc: Harry Wentland <harry.wentland@amd.com> Reviewed-by:
Daniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/20161215155843.13408-1-daniel.vetter@ffwll.ch
-
Daniel Vetter authored
The requirements for connector_list locking are a bit tricky: - We need to be able to jump over zombie conectors (i.e. with refcount == 0, but not yet removed from the list). If instead we require that there's no zombies on the list then the final kref_put must happen under the list protection lock, which means that locking context leaks all over the place. Not pretty - better to deal with zombies and wrap the locking just around the list_del in the destructor. - When we walk the list we must _not_ hold the connector list lock. We walk the connector list at an absolutely massive amounts of places, if all those places can't ever call drm_connector_unreference the code would get unecessarily complicated. - connector_list needs it own lock, again too many places that walk it that we could reuse e.g. mode_config.mutex without resulting in inversions. - Lots of code uses these loops to look-up a connector, i.e. they want to be able to call drm_connector_reference. But on the other hand we want connectors to stay on that list until they're dead (i.e. connector_list can't hold a full reference), which means despite the "can't hold lock for the loop body" rule we need to make sure a connector doesn't suddenly become a zombie. At first Dave&I discussed various horror-show approaches using srcu, but turns out it's fairly easy: - For the loop body we always hold an additional reference to the current connector. That means it can't zombify, and it also means it'll stay on the list, which means we can use it as our iterator to find the next connector. - When we try to find the next connector we only have to jump over zombies. To make sure we don't chase bad pointers that entire loop is protected with the new connect_list_lock spinlock. And because we know that we're starting out with a non-zombie (need to drop our reference for the old connector only after we have our new one), we're guranteed to still be on the connector_list and either find the next non-zombie or complete the iteration. - Only downside is that we need to make sure that the temporary reference for the loop body doesn't leak. iter_get/put() functions + lockdep make sure that's the case. - To avoid a flag day the new iterator macro has an _iter postfix. We can rename it back once all the users of the unsafe version are gone (there's about 100 list walkers for the connector_list). For now this patch only converts all the list walking in the core, leaving helpers and drivers for later patches. The nice thing is that we can now finally remove 2 FIXME comments from the register/unregister functions. v2: - use irqsafe spinlocks, so that we can use this in drm_state_dump too. - nuke drm_modeset_lock_all from drm_connector_init, now entirely cargo-culted nonsense. v3: - do {} while (!kref_get_unless_zero), makes for a tidier loop (Dave). - pretty kerneldoc - add EXPORT_SYMBOL, helpers&drivers are supposed to use this. v4: Change lockdep annotations to only check whether we release the iter fake lock again (i.e. make sure that iter_put is called), but not check any locking dependecies itself. That seams to require a recursive read lock in trylock mode. Cc: Dave Airlie <airlied@gmail.com> Cc: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by: -
Daniel Vetter authored
This is single-threaded setup code, no need for locks. And anyway, all properties need to be set up before the driver is registered anyway, they can't be hot-added. Reviewed-by:
Daniel Stone <daniels@collabora.com> Signed-off-by:
-
Daniel Vetter authored
The list walk will shortcircuit anyway. Cc: Alex Deucher <alexdeucher@gmail.com> Reviewed-by:
Alex Deucher <alexander.deucher@amd.com> Signed-off-by:
-
Daniel Vetter authored
This is not driver interface stuff. Fixes: 6559c901 ("drm/atomic: add debugfs file to dump out atomic state") Cc: Rob Clark <robdclark@gmail.com> Cc: Sean Paul <seanpaul@chromium.org> Cc: Daniel Vetter <daniel.vetter@intel.com> Cc: Jani Nikula <jani.nikula@linux.intel.com> Reviewed-by:
-
Daniel Vetter authored
Spotted while auditing our ioctl table. Also nuke the not-really-kerneldoc comments, we don't document internals and definitely don't want to mislead people with the old dragons. I think with this all the legacy ioctls now have proper drm_legacy_ prefixes. Reviewed-by:
-
Laurent Pinchart authored
Instead of detaching only the bridge directly connected to the encoder, detach all bridges in the chain. Signed-off-by:
Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Reviewed-by:
Archit Taneja <architt@codeaurora.org> Link: http://patchwork.freedesktop.org/patch/msgid/1481709550-29226-6-git-send-email-laurent.pinchart+renesas@ideasonboard.com
-
Laurent Pinchart authored
Most drivers that use bridges forgot to detach them at cleanup time. Instead of fixing them one by one, detach the bridge in the core drm_encoder_cleanup() function. Signed-off-by:
-
Laurent Pinchart authored
Instead of linking encoders and bridges in every driver (and getting it wrong half of the time, as many drivers forget to set the drm_bridge encoder pointer), do so in core code. The drm_bridge_attach() function needs the encoder and optional previous bridge to perform that task, update all the callers. Signed-off-by:
-
Laurent Pinchart authored
The drm_crtc_mask() function used in <drm/drm_encoder.h> is a static inline defined in <drm/drm_crtc.h>. If the first header is included in a compilation unit without the second one, the following compilation warning will be issued. In file included from <linux>/drivers/gpu/drm/drm_bridge.c:29:0: <linux>/include/drm/drm_encoder.h:192:95: warning: ‘drm_crtc_mask’ used but never defined static inline uint32_t drm_crtc_mask(const struct drm_crtc *crtc); Fix this by including the header defining the function instead of using a forward declaration. Signed-off-by:
-
Laurent Pinchart authored
<drm/drm_crtc.h> used to define most of the in-kernel KMS API. It has now been split into separate files for each object type, but still includes most other KMS headers to avoid breaking driver compilation. As a step towards fixing that problem, remove the inclusion of <drm/drm_encoder.h> from <drm/drm_crtc.h> and include it instead where appropriate. Also remove the forward declarations of the drm_encoder and drm_encoder_helper_funcs structures from <drm/drm_crtc.h> as they're not needed in the header. <drm/drm_encoder.h> now has to include <drm/drm_mode.h> and contain a forward declaration of struct drm_encoder in order to allow including it as the first header in a compilation unit. Signed-off-by:
-
- 16 Dec, 2016 4 commits
-
-
Chris Wilson authored
If we remember that node_list is a circular list containing the fake head_node, we can use a simple list_next_entry() and skip the NULL check for the allocated check against the head_node. Signed-off-by:
Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Signed-off-by:
-
Chris Wilson authored
Mark up the pointers as constant through the API where appropriate. Signed-off-by:
-
Chris Wilson authored
A complement to drm_mm_for_each_node(), wraps list_for_each_entry_safe() for walking the list of nodes safe against removal. Note from Joonas: "Most of the diff is about __drm_mm_nodes(mm), which could be split into own patch and keep the R-b's." But I don't feel like insisting on the resend. Signed-off-by:
-
Jason A. Donenfeld authored
On most platforms, there exists this ifdef: #define atomic_inc_not_zero(v) atomic_add_unless((v), 1, 0) This makes this patch functionally useless. However, on PPC, there is actually an explicit definition of atomic_inc_not_zero with its own assembly that is slightly more optimized than atomic_add_unless. So, this patch changes kref to use atomic_inc_not_zero instead, for PPC and any future platforms that might provide an explicit implementation. This also puts this usage of kref more in line with a verbatim reading of the examples in Paul McKenney's paper [1] in the section titled "2.4 Atomic Counting With Check and Release Memory Barrier", which uses atomic_inc_not_zero. [1] http://open-std.org/jtc1/sc22/wg21/docs/papers/2007/n2167.pdfSigned-off-by:
Jason A. Donenfeld <Jason@zx2c4.com> Reviewed-by:
Thomas Hellstrom <thellstrom@vmware.com> Signed-off-by:
-
- 15 Dec, 2016 23 commits
-
-
Ville Syrjälä authored
drm_modeset_helper.c:74: warning: No description found for parameter 'dev' Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Cc: Alex Deucher <alexander.deucher@amd.com> Fixes: a3f913ca ("drm: Pass 'dev' to drm_helper_mode_fill_fb_struct()") Signed-off-by:
Ville Syrjälä <ville.syrjala@linux.intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/20161215170128.23972-1-ville.syrjala@linux.intel.comReviewed-by:
Laurent Pinchart <laurent.pinchart@ideasonboard.com>
-
Maarten Lankhorst authored
drm_atomic_state_put is called unconditionally, so TEST_ONLY is no different from commit. Signed-off-by:
Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Signed-off-by:
-
Thierry Reding authored
drm_event_reserve_init_locked() is the correct function to call when already holding the dev->event_lock lock. Signed-off-by:
Thierry Reding <treding@nvidia.com> Signed-off-by:
-
Ville Syrjälä authored
Apparently my arm .config had reverted to CMA=n at some point, so I failed to notice that I typoed the code. Fix it up so that the cma helper will compile again. Reported-by:
kbuild test robot <fengguang.wu@intel.com> Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Fixes: ca984a99 ("drm/fb_cma_helper: Replace drm_format_info() with fb->format") Signed-off-by:
-
Ville Syrjälä authored
No point in spamming the log whenever a non-RGB fb is being constructed. And since there's nothing to do anymore that fb->bits_per_pixel and fb->depth are gone, we can just kill off this entire piece of code. Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Suggested-by:
-
Ville Syrjälä authored
Rather than compare the format u32s of two format infos, we can direclty compare the format info pointers themselves. Noramlly all the ->format pointers all point to somwehere in the big array, so this is a valid way to test for equality. Also drivers may want to point ->format at a private format info struct instead (eg. for special compressed formats with extra planes), so just comparing the pixel format values wouldn't necessaritly even work. But comparing the pointers will also take care of that case. @@ struct drm_framebuffer *a; struct drm_framebuffer *b; @@ ( - a->format->format != b->format->format + a->format != b->format | - a->format->format == b->format->format + a->format == b->format ) @@ struct drm_plane_state *a; struct drm_plane_state *b; @@ ( - a->fb->format->format != b->fb->format->format + a->fb->format != b->fb->format | - a->fb->format->format == b->fb->format->format + a->fb->format == b->fb->format ) @@ struct drm_crtc *crtc; struct drm_framebuffer *x; @@ ( - crtc->primary->fb->format->format != x->format->format + crtc->primary->fb->format != x->format | - x->format->format != crtc->primary->fb->format->format + x->format != crtc->primary->fb->format ) @@ struct drm_mode_set *set; @@ - set->fb->format->format != set->crtc->primary->fb->format->format + set->fb->format != set->crtc->primary->fb->format Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Suggested-by:
-
Ville Syrjälä authored
Replace uses of fb->pixel_format with fb->format->format. Less duplicated information is a good thing. Note that coccinelle failed to eliminate the "/* fourcc format */" comment from drm_framebuffer.h, so I had to do that part manually. @@ struct drm_framebuffer *FB; expression E; @@ drm_helper_mode_fill_fb_struct(...) { ... - FB->pixel_format = E; ... } @@ struct drm_framebuffer *FB; expression E; @@ i9xx_get_initial_plane_config(...) { ... - FB->pixel_format = E; ... } @@ struct drm_framebuffer *FB; expression E; @@ ironlake_get_initial_plane_config(...) { ... - FB->pixel_format = E; ... } @@ struct drm_framebuffer *FB; expression E; @@ skylake_get_initial_plane_config(...) { ... - FB->pixel_format = E; ... } @@ struct drm_framebuffer *a; struct drm_framebuffer b; @@ ( - a->pixel_format + a->format->format | - b.pixel_format + b.format->format ) @@ struct drm_plane_state *a; struct drm_plane_state b; @@ ( - a->fb->pixel_format + a->fb->format->format | - b.fb->pixel_format + b.fb->format->format ) @@ struct drm_crtc *CRTC; @@ ( - CRTC->primary->fb->pixel_format + CRTC->primary->fb->format->format | - CRTC->primary->state->fb->pixel_format + CRTC->primary->state->fb->format->format ) @@ struct drm_mode_set *set; @@ ( - set->fb->pixel_format + set->fb->format->format | - set->crtc->primary->fb->pixel_format + set->crtc->primary->fb->format->format ) @@ @@ struct drm_framebuffer { ... - uint32_t pixel_format; ... }; v2: Fix commit message (Laurent) Rebase due to earlier removal of many fb->pixel_format uses, including the 'fb->format = drm_format_info(fb->format->format);' snafu v3: Adjusted the semantic patch a bit and regenerated due to code changes Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: -
Ville Syrjälä authored
Replace uses of fb->bits_per_pixel with fb->format->cpp[0]*8. Less duplicated information is a good thing. Note that I didn't put parens around the cpp*8 in the below cocci script, on account of not wanting spurious parens all over the place. Instead I did the unsafe way, and tried to look over the entire diff to spot if any dangerous expressions were produced. I didn't see any. There are some cases where previously the code did X*bpp/8, so the division happened after the multiplication. Those are now just X*cpp so the division effectively happens before the multiplication, but that is perfectly fine since bpp is always a multiple of 8. @@ struct drm_framebuffer *FB; expression E; @@ drm_helper_mode_fill_fb_struct(...) { ... - FB->bits_per_pixel = E; ... } @@ struct drm_framebuffer *FB; expression E; @@ i9xx_get_initial_plane_config(...) { ... - FB->bits_per_pixel = E; ... } @@ struct drm_framebuffer *FB; expression E; @@ ironlake_get_initial_plane_config(...) { ... - FB->bits_per_pixel = E; ... } @@ struct drm_framebuffer *FB; expression E; @@ skylake_get_initial_plane_config(...) { ... - FB->bits_per_pixel = E; ... } @@ struct drm_framebuffer FB; expression E; @@ ( - E * FB.bits_per_pixel / 8 + E * FB.format->cpp[0] | - FB.bits_per_pixel / 8 + FB.format->cpp[0] | - E * FB.bits_per_pixel >> 3 + E * FB.format->cpp[0] | - FB.bits_per_pixel >> 3 + FB.format->cpp[0] | - (FB.bits_per_pixel + 7) / 8 + FB.format->cpp[0] | - FB.bits_per_pixel + FB.format->cpp[0] * 8 | - FB.format->cpp[0] * 8 != 8 + FB.format->cpp[0] != 1 ) @@ struct drm_framebuffer *FB; expression E; @@ ( - E * FB->bits_per_pixel / 8 + E * FB->format->cpp[0] | - FB->bits_per_pixel / 8 + FB->format->cpp[0] | - E * FB->bits_per_pixel >> 3 + E * FB->format->cpp[0] | - FB->bits_per_pixel >> 3 + FB->format->cpp[0] | - (FB->bits_per_pixel + 7) / 8 + FB->format->cpp[0] | - FB->bits_per_pixel + FB->format->cpp[0] * 8 | - FB->format->cpp[0] * 8 != 8 + FB->format->cpp[0] != 1 ) @@ struct drm_plane_state *state; expression E; @@ ( - E * state->fb->bits_per_pixel / 8 + E * state->fb->format->cpp[0] | - state->fb->bits_per_pixel / 8 + state->fb->format->cpp[0] | - E * state->fb->bits_per_pixel >> 3 + E * state->fb->format->cpp[0] | - state->fb->bits_per_pixel >> 3 + state->fb->format->cpp[0] | - (state->fb->bits_per_pixel + 7) / 8 + state->fb->format->cpp[0] | - state->fb->bits_per_pixel + state->fb->format->cpp[0] * 8 | - state->fb->format->cpp[0] * 8 != 8 + state->fb->format->cpp[0] != 1 ) @@ @@ - (8 * 8) + 8 * 8 @@ struct drm_framebuffer FB; @@ - (FB.format->cpp[0]) + FB.format->cpp[0] @@ struct drm_framebuffer *FB; @@ - (FB->format->cpp[0]) + FB->format->cpp[0] @@ @@ struct drm_framebuffer { ... - int bits_per_pixel; ... }; v2: Clean up the 'cpp*8 != 8' and '(8 * 8)' cases (Laurent) v3: Adjusted the semantic patch a bit and regenerated due to code changes Signed-off-by: -
Ville Syrjälä authored
Replace uses of fb->depth with fb->format->depth. Less duplicate information is a good thing. @@ struct drm_framebuffer *fb; expression E; @@ drm_helper_mode_fill_fb_struct(...) { ... - fb->depth = E; ... } @@ struct nouveau_framebuffer *fb; @@ - fb->base.depth + fb->base.format->depth @@ struct drm_framebuffer fb; @@ - fb.depth + fb.format->depth @@ struct drm_framebuffer *fb; @@ - fb->depth + fb->format->depth @@ struct drm_framebuffer fb; @@ - (fb.format->depth) + fb.format->depth @@ struct drm_framebuffer *fb; @@ - (fb->format->depth) + fb->format->depth @@ @@ struct drm_framebuffer { ... - unsigned int depth; ... }; v2: Drop the vmw stuff (Daniel) Rerun spatch due to code changes Signed-off-by: -
Ville Syrjälä authored
Replace drm_format_plane_{width,height}() usage with drm_framebuffer_plane_{width,height}() to avoid the lookup of the format info. Cc: intel-gfx@lists.freedesktop.org Signed-off-by: -
Ville Syrjälä authored
Add variants of drm_format_plane_{width,height}() that take an entire fb object instead of just the format. These should be more efficent as they can just look up the format info from the fb->format pointer rather than having to look it up (using a linear search based on the format). Signed-off-by: -
Ville Syrjälä authored
Rather than store the pixel format and look up the format info as needed, let's just store a pointer to the format info directly and speed up our lookups. Cc: Paulo Zanoni <paulo.r.zanoni@intel.com> Cc: intel-gfx@lists.freedesktop.org Signed-off-by:
-
Ville Syrjälä authored
Let's use the pointer to the format information cached under drm_framebuffer rather than look it up manually. Cc: Ben Skeggs <bskeggs@redhat.com> Signed-off-by:
-
Ville Syrjälä authored
Get the format information via the neat fb->format pointer rather than doing a linear search over all the format info structures. Signed-off-by:
-
Ville Syrjälä authored
Replace drm_format_plane_cpp(fb->pixel_format) with just fb->format->cpp[]. Avoids the expensive format info lookup. @@ struct drm_framebuffer *a; struct drm_framebuffer b; expression E; @@ ( - drm_format_plane_cpp(a->pixel_format, E) + a->format->cpp[E] | - drm_format_plane_cpp(b.pixel_format, E) + b.format->cpp[E] ) @@ struct drm_plane_state *a; struct drm_plane_state b; expression E; @@ ( - drm_format_plane_cpp(a->fb->pixel_format, E) + a->fb->format->cpp[E] | - drm_format_plane_cpp(b.fb->pixel_format, E) + b.fb->format->cpp[E] ) @@ struct drm_framebuffer *a; identifier T; expression E; @@ T = a->pixel_format <+... - drm_format_plane_cpp(T, E) + a->format->cpp[E] ...+> @@ struct drm_framebuffer b; identifier T; expression E; @@ T = b.pixel_format <+... - drm_format_plane_cpp(T, E) + b.format->cpp[E] ...+> v2: Rerun spatch due to code changes Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Suggested-by:
-
Ville Syrjälä authored
Don't access plane_state->fb until we know the plane to be visible. It it's visible, it will have an fb, and thus we don't have to consider the NULL fb case. Makes the code look nicer. Cc: intel-gfx@lists.freedesktop.org Signed-off-by:
-
Ville Syrjälä authored
Replace drm_format_num_planes(fb->pixel_format) with just fb->format->num_planes. Avoids the expensive format info lookup. @@ struct drm_framebuffer *a; struct drm_framebuffer b; @@ ( - drm_format_num_planes(a->pixel_format) + a->format->num_planes | - drm_format_num_planes(b.pixel_format) + b.format->num_planes ) @@ struct drm_plane_state *a; struct drm_plane_state b; @@ ( - drm_format_num_planes(a->fb->pixel_format) + a->fb->format->num_planes | - drm_format_num_planes(b.fb->pixel_format) + b.fb->format->num_planes ) @@ struct drm_framebuffer *a; identifier T; @@ T = a->pixel_format <+... - drm_format_num_planes(T) + a->format->num_planes ...+> @@ struct drm_framebuffer b; identifier T; @@ T = b.pixel_format <+... - drm_format_num_planes(T) + b.format->num_planes ...+> v2: Rerun spatch due to code changes Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Suggested-by:
-
Ville Syrjälä authored
Any framebuffer that doesn't have proper format information when drm_framebuffer_init() is called is a bug. Let's warn and return an error to avoid oopsing the kernel later due to dereferencing the NULL fb->format pointer. Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Suggested-by:
-
Ville Syrjälä authored
Make sure the framebuffer format info is available as early as possible for fbs we inherit from the BIOS. This will allow us to use the fb as if it was fully formed before we register it. Cc: intel-gfx@lists.freedesktop.org Signed-off-by:
-
Ville Syrjälä authored
To avoid having to look up the format information struct every time, let's just store a pointer to it under drm_framebuffer. v2: Don't populate the fb->format pointer in drm_framebuffer_init(). instead we'll treat a NULL format as an error later Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: -
Ville Syrjälä authored
Populating fb->dev before drm_framebuffer_init() allows us to use fb->dev already while validating the framebuffer. Let's have drm_helper_mode_fill_fb_struct() do that for us. Also make drm_framebuffer_init() warn us if a different device pointer is passed to it than was passed to drm_helper_mode_fill_fb_struct(). v2: Reject fbs with invalid fb->dev (Laurent) Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by:
-
Ville Syrjälä authored
We want the fbs inherited from the BIOS to be more or less fully working prior to actually registering them. This will allow us to just pass the fb to various helper function instead of having to pass all the different parameters separately. Cc: intel-gfx@lists.freedesktop.org Signed-off-by:
-
Ville Syrjälä authored
We want framebuffers to be mostly useable already before drm_framebuffer_init() get called, and so we will start demanding that all the interesting format/size/etc. information be filled in before drm_framebuffer_init(). drm_helper_mode_fill_fb_struct() will do that for us, so let's make sure it gets called before drm_framebuffer_init(). Cc: Dave Airlie <airlied@redhat.com> Cc: Gerd Hoffmann <kraxel@redhat.com> Signed-off-by:
-
