Skip to content

L
linux
Switch branch/tag
  1. 17 May, 2011 9 commits
    • Rafael J. Wysocki's avatar
      PM / Wakeup: Fix build warning related to the "wakeup" sysfs file · e762318b
      Rafael J. Wysocki authored 
      The "wakeup" device sysfs file is only created if CONFIG_PM_SLEEP
is set, so put it under CONFIG_PM_SLEEP and make a build warning
related to it go away.
Signed-off-by: default avatarRafael J. Wysocki <rjw@sisk.pl>
Acked-by: default avatarGreg Kroah-Hartman <gregkh@suse.de>
      e762318b
    • Rafael J. Wysocki's avatar
      PM: Print a warning if firmware is requested when tasks are frozen · a144c6a6
      Rafael J. Wysocki authored 
      Some drivers erroneously use request_firmware() from their ->resume()
(or ->thaw(), or ->restore()) callbacks, which is not going to work
unless the firmware has been built in.  This causes system resume to
stall until the firmware-loading timeout expires, which makes users
think that the resume has failed and reboot their machines
unnecessarily.  For this reason, make _request_firmware() print a
warning and return immediately with error code if it has been called
when tasks are frozen and it's impossible to start any new usermode
helpers.
Signed-off-by: default avatarRafael J. Wysocki <rjw@sisk.pl>
Acked-by: default avatarGreg Kroah-Hartman <gregkh@suse.de>
Reviewed-by: default avatarValdis Kletnieks <valdis.kletnieks@vt.edu>
      a144c6a6
    • Rafael J. Wysocki's avatar
      PM / Runtime: Rework runtime PM handling during driver removal · e1866b33
      Rafael J. Wysocki authored 
      The driver core tries to prevent race conditions between runtime PM
and driver removal from happening by incrementing the runtime PM
usage counter of the device and executing pm_runtime_barrier() before
running the bus notifier and the ->remove() callbacks provided by the
device's subsystem or driver.  This guarantees that, if a future
runtime suspend of the device has been scheduled or a runtime resume
or idle request has been queued up right before the driver removal,
it will be canceled or waited for to complete and no other
asynchronous runtime suspend or idle requests for the device will be
put into the PM workqueue until the ->remove() callback returns.
However, it doesn't prevent resume requests from being queued up
after pm_runtime_barrier() has been called and it doesn't prevent
pm_runtime_resume() from executing the device subsystem's runtime
resume callback.  Morever, it prevents the device's subsystem or
driver from putting the device into the suspended state by calling
pm_runtime_suspend() from its ->remove() routine.  This turns out to
be a major inconvenience for some subsystems and drivers that want to
leave the devices they handle in the suspended state.

To really prevent runtime PM callbacks from racing with the bus
notifier callback in __device_release_driver(), which is necessary,
because the notifier is used by some subsystems to carry out
operations affecting the runtime PM functionality, use
pm_runtime_get_sync() instead of the combination of
pm_runtime_get_noresume() and pm_runtime_barrier().  This will resume
the device if it's in the suspended state and will prevent it from
being suspended again until pm_runtime_put_*() is called.

To allow subsystems and drivers to put devices into the suspended
state by calling pm_runtime_suspend() from their ->remove() routines,
execute pm_runtime_put_sync() after running the bus notifier in
__device_release_driver().  This will require subsystems and drivers
to make their ->remove() callbacks avoid races with runtime PM
directly, but it will allow of more flexibility in the handling of
devices during the removal of their drivers.
Signed-off-by: default avatarRafael J. Wysocki <rjw@sisk.pl>
      e1866b33
    • Mike Frysinger's avatar
      Freezer: Use SMP barriers · ee940d8d
      Mike Frysinger authored 
      The freezer processes are dealing with multiple threads running
simultaneously, and on a UP system, the memory reads/writes do
not need barriers to keep things in sync.  These are only needed
on SMP systems, so use SMP barriers instead.
Signed-off-by: default avatarMike Frysinger <vapier@gentoo.org>
Acked-by: default avatarPavel Machek <pavel@ucw.cz>
Signed-off-by: default avatarRafael J. Wysocki <rjw@sisk.pl>
      ee940d8d
    • MyungJoo Ham's avatar
      PM / Suspend: Do not ignore error codes returned by suspend_enter() · 3c431936
      MyungJoo Ham authored 
      The current implementation of suspend-to-RAM returns 0 if there is an
error from suspend_enter(), because suspend_devices_and_enter() ignores
the return value from suspend_enter().  This patch addresses this issue
and properly keep the error return from suspend_enter() and let
suspend_devices_and_enter relay the error return.
Signed-off-by: default avatarMyungJoo Ham <myungjoo.ham@samsung.com>
Signed-off-by: default avatarKyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: default avatarRafael J. Wysocki <rjw@sisk.pl>
      3c431936
    • Linus Torvalds's avatar
      Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6 · c1d10d18
      Linus Torvalds authored 
      * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6:
  net: Change netdev_fix_features messages loglevel
  vmxnet3: Fix inconsistent LRO state after initialization
  sfc: Fix oops in register dump after mapping change
  IPVS: fix netns if reading ip_vs_* procfs entries
  bridge: fix forwarding of IPv6
      c1d10d18
    • Linus Torvalds's avatar
      Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/cjb/mmc · 477de0de
      Linus Torvalds authored 
      * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/cjb/mmc:
  Revert "mmc: fix a race between card-detect rescan and clock-gate work instances"
      477de0de
    • Randy Dunlap's avatar
      mm: fix kernel-doc warning in page_alloc.c · b5e6ab58
      Randy Dunlap authored 
      Fix new kernel-doc warning in mm/page_alloc.c:

  Warning(mm/page_alloc.c:2370): No description found for parameter 'nid'
Signed-off-by: default avatarRandy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: default avatarLinus Torvalds <torvalds@linux-foundation.org>
      b5e6ab58
    • Yinghai Lu's avatar
      PCI: Clear bridge resource flags if requested size is 0 · 93d2175d
      Yinghai Lu authored 
      During pci remove/rescan testing found:

  pci 0000:c0:03.0: PCI bridge to [bus c4-c9]
  pci 0000:c0:03.0:   bridge window [io  0x1000-0x0fff]
  pci 0000:c0:03.0:   bridge window [mem 0xf0000000-0xf00fffff]
  pci 0000:c0:03.0:   bridge window [mem 0xfc180000000-0xfc197ffffff 64bit pref]
  pci 0000:c0:03.0: device not available (can't reserve [io  0x1000-0x0fff])
  pci 0000:c0:03.0: Error enabling bridge (-22), continuing
  pci 0000:c0:03.0: enabling bus mastering
  pci 0000:c0:03.0: setting latency timer to 64
  pcieport 0000:c0:03.0: device not available (can't reserve [io  0x1000-0x0fff])
  pcieport: probe of 0000:c0:03.0 failed with error -22

This bug was caused by commit c8adf9a3 ("PCI: pre-allocate
additional resources to devices only after successful allocation of
essential resources.")

After that commit, pci_hotplug_io_size is changed to additional_io_size
from minium size.  So it will not go through resource_size(res) != 0
path, and will not be reset.

The root cause is: pci_bridge_check_ranges will set RESOURCE_IO flag for
pci bridge, and later if children do not need IO resource.  those bridge
resources will not need to be allocated.  but flags is still there.
that will confuse the the pci_enable_bridges later.

related code:

   static void assign_requested_resources_sorted(struct resource_list *head,
                                    struct resource_list_x *fail_head)
   {
           struct resource *res;
           struct resource_list *list;
           int idx;

           for (list = head->next; list; list = list->next) {
                   res = list->res;
                   idx = res - &list->dev->resource[0];
                   if (resource_size(res) && pci_assign_resource(list->dev, idx)) {
   ...
                           reset_resource(res);
                   }
           }
   }

At last, We have to clear the flags in pbus_size_mem/io when requested
size == 0 and !add_head.  becasue this case it will not go through
adjust_resources_sorted().

Just make size1 = size0 when !add_head. it will make flags get cleared.

At the same time when requested size == 0, add_size != 0, will still
have in head and add_list.  because we do not clear the flags for it.

After this, we will get right result:

  pci 0000:c0:03.0: PCI bridge to [bus c4-c9]
  pci 0000:c0:03.0:   bridge window [io  disabled]
  pci 0000:c0:03.0:   bridge window [mem 0xf0000000-0xf00fffff]
  pci 0000:c0:03.0:   bridge window [mem 0xfc180000000-0xfc197ffffff 64bit pref]
  pci 0000:c0:03.0: enabling bus mastering
  pci 0000:c0:03.0: setting latency timer to 64
  pcieport 0000:c0:03.0: setting latency timer to 64
  pcieport 0000:c0:03.0: irq 160 for MSI/MSI-X
  pcieport 0000:c0:03.0: Signaling PME through PCIe PME interrupt
  pci 0000:c4:00.0: Signaling PME through PCIe PME interrupt
  pcie_pme 0000:c0:03.0:pcie01: service driver pcie_pme loaded
  aer 0000:c0:03.0:pcie02: service driver aer loaded
  pciehp 0000:c0:03.0:pcie04: Hotplug Controller:

v3: more simple fix. also fix one typo in pbus_size_mem
Signed-off-by: default avatarYinghai Lu <yinghai@kernel.org>
Reviewed-by: default avatarRam Pai <linuxram@us.ibm.com>
Cc: Jesse Barnes <jbarnes@virtuousgeek.org>
Cc: Bjorn Helgaas <bhelgaas@google.com>
Signed-off-by: default avatarLinus Torvalds <torvalds@linux-foundation.org>
      93d2175d
  3. 16 May, 2011 7 commits
  5. 15 May, 2011 6 commits
  7. 14 May, 2011 14 commits
  9. 13 May, 2011 4 commits
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7