- 03 Jun, 2018 40 commits
-
-
Anju T Sudhakar authored
Return proper error code for unknown domain during IMC initialization. Signed-off-by:
Anju T Sudhakar <anju@linux.vnet.ibm.com> Reviewed-by:
Madhavan Srinivasan <maddy@linux.vnet.ibm.com> Signed-off-by:
Michael Ellerman <mpe@ellerman.id.au>
-
Anju T Sudhakar authored
Replace the direct return statement in imc_mem_init() with goto, to adhere to the kernel coding style. Signed-off-by:
-
Anju T Sudhakar authored
When any of the IMC (In-Memory Collection counter) devices fail to initialize, imc_common_mem_free() frees set of memory. In doing so, pmu_ptr pointer is also freed. But pmu_ptr pointer is used in subsequent function (imc_common_cpuhp_mem_free()) which is wrong. Patch here reorders the code to avoid such access. Also free the memory which is dynamically allocated during imc initialization, wherever required. Signed-off-by:
-
YueHaibing authored
The device node obtained with of_find_compatible_node() should be released by calling of_node_put(). But it was not released when of_get_property() failed. Signed-off-by:
YueHaibing <yuehaibing@huawei.com> [mpe: Invert the sense of the if so we only need one return path] Signed-off-by:
-
Fabio Estevam authored
Structure platform_driver does not need to set the owner field, as this will be populated by the driver core. Generated by scripts/coccinelle/api/platform_no_drv_owner.cocci. Signed-off-by:
Fabio Estevam <fabio.estevam@nxp.com> Signed-off-by:
-
Russell Currey authored
The GETFIELD and SETFIELD macros in xive-regs.h aren't used except for a single instance of GETFIELD, so replace that and remove them. These macros are also defined in vas.h, so either those should be eventually replaced or the macros moved into bitops.h. Signed-off-by:
Russell Currey <ruscur@russell.cc> [mpe: Rewrite the assignment to 'he' to avoid ffs() etc.] Signed-off-by:
-
Stewart Smith authored
time_init() will set up tb_ticks_per_usec based on reality. time_init() is called *after* udbg_init_opal_common() during boot. from arch/powerpc/kernel/time.c: unsigned long tb_ticks_per_usec = 100; /* sane default */ Currently, all powernv systems have a timebase frequency of 512mhz (512000000/1000000 == 0x200) - although there's nothing written down anywhere that I can find saying that we couldn't make that different based on the requirements in the ISA. So, we've been (accidentally) thwacking the (currently) correct (for powernv at least) value for tb_ticks_per_usec earlier than we otherwise would have. The "sane default" seems to be adequate for our purposes between udbg_init_opal_common() and time_init() being called, and if it isn't, then we should probably be setting it somewhere that isn't hvc_opal.c! Signed-off-by:
Stewart Smith <stewart@linux.ibm.com> Signed-off-by:
-
Arnd Bergmann authored
to_tm() is now completely unused, the only reference being in the _dump_time() helper that is also unused. This removes both, leaving the rest of the powerpc RTC code y2038 safe to as far as the hardware supports. Signed-off-by:
Arnd Bergmann <arnd@arndb.de> Signed-off-by:
-
Arnd Bergmann authored
update_persistent_clock() is deprecated because it suffers from overflow in 2038 on 32-bit architectures. This changes powerpc to use the update_persistent_clock64() replacement, and to pass down 64-bit timestamps consistently. This is now simpler, as we no longer have to worry about the offset numbers in tm_year and tm_mon that are different between the Linux conventions and RTAS. Signed-off-by:
-
Arnd Bergmann authored
Looking through the remaining users of the deprecated mktime() function, I found the powerpc rtc handlers, which use it in place of rtc_tm_to_time64(). To clean this up, I'm changing over the read_persistent_clock() function to the read_persistent_clock64() variant, and change all the platform specific handlers along with it. Signed-off-by:
-
Arnd Bergmann authored
The to_tm() helper function operates on a signed integer for the time, so it will suffer from overflow in 2038, even on 64-bit kernels. Rather than fix that function, this replaces its use in the rtas procfs implementation with the standard rtc_time64_to_tm() helper that is very similar but is not affected by the overflow. In order to actually support long times, the parser function gets changed to 64-bit user input and output as well. Note that the tm_mon and tm_year representation is slightly different, so we have to manually add an offset here. Signed-off-by:
-
Arnd Bergmann authored
In order to use the rtc_tm_to_time64() and rtc_time64_to_tm() helper functions in later patches, we have to ensure that CONFIG_RTC_LIB is always built-in. Note that this symbol only controls a couple of helper functions, not the actual RTC subsystem, which remains optional and is enabled with CONFIG_RTC_CLASS. Signed-off-by:
-
Olof Johansson authored
Needed on Amiga X1000 with SB600. Reported-by:
Christian Zigotzky <chzigotzky@xenosoft.de> Signed-off-by:
Olof Johansson <olof@lixom.net> Signed-off-by:
-
Aneesh Kumar K.V authored
When inserting SLB entries for EA above 512TB, we need to hard disable irq. This will make sure we don't take a PMU interrupt that can possibly touch user space address via a stack dump. To prevent this, we need to hard disable the interrupt. Also add a comment explaining why we don't need context synchronizing isync with slbmte. Fixes: f384796c ("powerpc/mm: Add support for handling > 512TB address in SLB miss") Signed-off-by:
Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com> Signed-off-by:
-
Aneesh Kumar K.V authored
With split pmd page table lock enabled, we don't use mm->page_table_lock when updating pmd entries. This patch update hugetlb path to use the right lock when inserting huge page directory entries into page table. ex: if we are using hugepd and inserting hugepd entry at the pmd level, we use pmd_lockptr, which based on config can be split pmd lock. For update huge page directory entries itself we use mm->page_table_lock. We do have a helper huge_pte_lockptr() for that. Fixes: 675d9952 ("powerpc/book3s64: Enable split pmd ptlock") Signed-off-by:
-
Aneesh Kumar K.V authored
Currently we do not have an isync, or any other context synchronizing instruction prior to the slbie/slbmte in _switch() that updates the SLB entry for the kernel stack. However that is not correct as outlined in the ISA. From Power ISA Version 3.0B, Book III, Chapter 11, page 1133: "Changing the contents of ... the contents of SLB entries ... can have the side effect of altering the context in which data addresses and instruction addresses are interpreted, and in which instructions are executed and data accesses are performed. ... These side effects need not occur in program order, and therefore may require explicit synchronization by software. ... The synchronizing instruction before the context-altering instruction ensures that all instructions up to and including that synchronizing instruction are fetched and executed in the context that existed before the alteration." And page 1136: "For data accesses, the context synchronizing instruction before the slbie, slbieg, slbia, slbmte, tlbie, or tlbiel instruction ensures that all preceding instructions that access data storage have completed to a point at which they have reported all exceptions they will cause." We're not aware of any bugs caused by this, but it should be fixed regardless. Add the missing isync when updating kernel stack SLB entry. Cc: stable@vger.kernel.org Signed-off-by:
-
Nicholas Piggin authored
The stores to update the SLB shadow area must be made as they appear in the C code, so that the hypervisor does not see an entry with mismatched vsid and esid. Use WRITE_ONCE for this. GCC has been observed to elide the first store to esid in the update, which means that if the hypervisor interrupts the guest after storing to vsid, it could see an entry with old esid and new vsid, which may possibly result in memory corruption. Signed-off-by:
Nicholas Piggin <npiggin@gmail.com> Signed-off-by:
-
Nicholas Piggin authored
When a single-threaded process has a non-local mm_cpumask, try to use that point to flush the TLBs out of other CPUs in the cpumask. An IPI is used for clearing remote CPUs for a few reasons: - An IPI can end lazy TLB use of the mm, which is required to prevent TLB entries being created on the remote CPU. The alternative is to drop lazy TLB switching completely, which costs 7.5% in a context switch ping-pong test betwee a process and kernel idle thread. - An IPI can have remote CPUs flush the entire PID, but the local CPU can flush a specific VA. tlbie would require over-flushing of the local CPU (where the process is running). - A single threaded process that is migrated to a different CPU is likely to have a relatively small mm_cpumask, so IPI is reasonable. No other thread can concurrently switch to this mm, because it must have been given a reference to mm_users by the current thread before it can use_mm. mm_users can be asynchronously incremented (by mm_activate or mmget_not_zero), but those users must use remote mm access and can't use_mm or access user address space. Existing code makes the this assumption already, for example sparc64 has reset mm_cpumask using this condition since the start of history, see arch/sparc/kernel/smp_64.c. This reduces tlbies for a kernel compile workload from 0.90M to 0.12M, tlbiels are increased significantly due to the PID flushing for the cleaning up remote CPUs, and increased local flushes (PID flushes take 128 tlbiels vs 1 tlbie). Signed-off-by:
-
Nicholas Piggin authored
Implementing pte_update with pte_xchg (which uses cmpxchg) is inefficient. A single larx/stcx. works fine, no need for the less efficient cmpxchg sequence. Then remove the memory barriers from the operation. There is a requirement for TLB flushing to load mm_cpumask after the store that reduces pte permissions, which is moved into the TLB flush code. Signed-off-by:
-
Nicholas Piggin authored
The ISA suggests ptesync after setting a pte, to prevent a table walk initiated by a subsequent access from missing that store and causing a spurious fault. This is an architectual allowance that allows an implementation's page table walker to be incoherent with the store queue. However there is no correctness problem in taking a spurious fault in userspace -- the kernel copes with these at any time, so the updated pte will be found eventually. Spurious kernel faults on vmap memory must be avoided, so a ptesync is put into flush_cache_vmap. On POWER9 so far I have not found a measurable window where this can result in more minor faults, so as an optimisation, remove the costly ptesync from pte updates. If an implementation benefits from ptesync, it would be better to add it back in update_mmu_cache, so it's not done for things like fork(2). fork --fork --exec benchmark improved 5.2% (12400->13100). Signed-off-by:
-
Nicholas Piggin authored
Prefetch the faulting address in update_mmu_cache to give the page table walker perhaps 100 cycles head start as locks are dropped and the interrupt completed. Signed-off-by:
-
Nicholas Piggin authored
This matches other architectures, when we know there will be no further accesses to the address (e.g., for teardown), page table entries can be cleared non-atomically. The comments about NMMU are bogus: all MMU notifiers (including NMMU) are released at this point, with their TLBs flushed. An NMMU access at this point would be a bug. Signed-off-by:
-
Nicholas Piggin authored
In the case of a spurious fault (which can happen due to a race with another thread that changes the page table), the default Linux mm code calls flush_tlb_page for that address. This is not required because the pte will be re-fetched. Hash does not wire this up to a hardware TLB flush for this reason. This patch avoids the flush for radix. >From Power ISA v3.0B, p.1090: Setting a Reference or Change Bit or Upgrading Access Authority (PTE Subject to Atomic Hardware Updates) If the only change being made to a valid PTE that is subject to atomic hardware updates is to set the Refer- ence or Change bit to 1 or to add access authorities, a simpler sequence suffices because the translation hardware will refetch the PTE if an access is attempted for which the only problems were reference and/or change bits needing to be set or insufficient access authority. The nest MMU on POWER9 does not re-fetch the PTE after such an access attempt before faulting, so address spaces with a coprocessor attached will continue to flush in these cases. This reduces tlbies for a kernel compile workload from 0.95M to 0.90M. fork --fork --exec benchmark improved 0.5% (12300->12400). Reviewed-by:Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com> Signed-off-by:
-
Nicholas Piggin authored
Radix flushes the TLB when updating ptes to increase permissiveness of protection (increase access authority). Book3S does not require TLB flushing in this case, and it is not done on hash. This patch avoids the flush for radix. >From Power ISA v3.0B, p.1090: Setting a Reference or Change Bit or Upgrading Access Authority (PTE Subject to Atomic Hardware Updates) If the only change being made to a valid PTE that is subject to atomic hardware updates is to set the Reference or Change bit to 1 or to add access authorities, a simpler sequence suffices because the translation hardware will refetch the PTE if an access is attempted for which the only problems were reference and/or change bits needing to be set or insufficient access authority. The nest MMU on POWER9 does not re-fetch the PTE after such an access attempt before faulting, so address spaces with a coprocessor attached will continue to flush in these cases. This reduces tlbies for a kernel compile workload from 1.28M to 0.95M, tlbiels from 20.17M 19.68M. fork --fork --exec benchmark improved 2.77% (12000->12300). Reviewed-by: -
Aneesh Kumar K.V authored
When relaxing access (read -> read_write update), pte needs to be marked invalid to handle a nest MMU bug. We also need to do a tlb flush after the pte is marked invalid before updating the pte with new access bits. We also move tlb flush to platform specific __ptep_set_access_flags. This will help us to gerid of unnecessary tlb flush on BOOK3S 64 later. We don't do that in this patch. This also helps in avoiding multiple tlbies with coprocessor attached. Signed-off-by:
-
Aneesh Kumar K.V authored
In later patch, we use the vma and psize to do tlb flush. Do the prototype update in separate patch to make the review easy. Signed-off-by:
-
Aneesh Kumar K.V authored
In later patch we will update them which require them to be moved to pgtable-radix.c. Keeping the function in radix.h results in compile warning as below. ./arch/powerpc/include/asm/book3s/64/radix.h: In function ‘radix__ptep_set_access_flags’: ./arch/powerpc/include/asm/book3s/64/radix.h:196:28: error: dereferencing pointer to incomplete type ‘struct vm_area_struct’ struct mm_struct *mm = vma->vm_mm; ^~ ./arch/powerpc/include/asm/book3s/64/radix.h:204:6: error: implicit declaration of function ‘atomic_read’; did you mean ‘__atomic_load’? [-Werror=implicit-function-declaration] atomic_read(&mm->context.copros) > 0) { ^~~~~~~~~~~ __atomic_load ./arch/powerpc/include/asm/book3s/64/radix.h:204:21: error: dereferencing pointer to incomplete type ‘struct mm_struct’ atomic_read(&mm->context.copros) > 0) { Instead of fixing header dependencies, we move the function to pgtable-radix.c Also the function is now large to be a static inline . Doing the move in separate patch helps in review. No functional change in this patch. Only code movement. Signed-off-by: -
Aneesh Kumar K.V authored
In a later patch, we want to update __ptep_set_access_flags take page size arg. This makes ptep_set_access_flags only work with mmu_virtual_psize. To simplify the code make huge_ptep_set_access_flags directly call __ptep_set_access_flags so that we can compute the hugetlb page size in hugetlb function. Now that ptep_set_access_flags won't be called for hugetlb remove the is_vm_hugetlb_page() check and add the assert of pte lock unconditionally. Signed-off-by:
-
Alastair D'Silva authored
Signed-off-by:
Alastair D'Silva <alastair@d-silva.org> Acked-by:
Frederic Barrat <fbarrat@linux.vnet.ibm.com> Acked-by:
Andrew Donnellan <andrew.donnellan@au1.ibm.com> Signed-off-by:
-
Alastair D'Silva authored
In order for a userspace AFU driver to call the POWER9 specific OCXL_IOCTL_ENABLE_P9_WAIT, it needs to verify that it can actually make that call. Signed-off-by:
-
Alastair D'Silva authored
In order to successfully issue as_notify, an AFU needs to know the TID to notify, which in turn means that this information should be available in userspace so it can be communicated to the AFU. Signed-off-by:
-
Alastair D'Silva authored
The function removes the process element from NPU cache. Signed-off-by:
-
Alastair D'Silva authored
The current implementation of TID allocation, using a global IDR, may result in an errant process starving the system of available TIDs. Instead, use task_pid_nr(), as mentioned by the original author. The scenario described which prevented it's use is not applicable, as set_thread_tidr can only be called after the task struct has been populated. In the unlikely event that 2 threads share the TID and are waiting, all potential outcomes have been determined safe. Signed-off-by:
-
Alastair D'Silva authored
Switch the use of TIDR on it's CPU feature, rather than assuming it is available based on architecture. Signed-off-by:
-
Alastair D'Silva authored
This patch adds a CPU feature bit to show whether the CPU has the TIDR register available, enabling as_notify/wait in userspace. Signed-off-by:
-
Nicholas Piggin authored
Using irq_work for processing OPAL event interrupts is not necessary. irq_work is typically used to schedule work from NMI context, a softirq may be more appropriate. However OPAL events are not particularly performance or latency critical, so they can all be invoked by kopald. This patch removes the irq_work queueing, and instead wakes up kopald when there is an event to be processed. kopald processes interrupts individually, enabling irqs and calling cond_resched between each one to minimise latencies. Event handlers themselves should still use threaded handlers, workqueues, etc. as necessary to avoid high interrupts-off latencies within any single interrupt. Signed-off-by:
-
Nicholas Piggin authored
Although it is often possible to recover a CPU that was interrupted from OPAL with a system reset NMI, it's undesirable to interrupt them for a few reasons. Firstly because dump/debug code itself needs to call firmware, so it could hang on a lock or possibly corrupt a per-cpu data structure if it or another CPU was interrupted from OPAL. Secondly, the kexec crash dump code will not return from interrupt to unwind the OPAL call. Call OPAL_QUIESCE with QUIESCE_HOLD before sending an NMI IPI to another CPU, which wait for it to leave firmware (or time out) to avoid this problem in normal conditions. Firmware bugs may still result in a timeout and interrupting OPAL, but that is the best option (stops the CPU, and possibly allows firmware to be debugged). Signed-off-by:
-
Nicholas Piggin authored
When the soft enabled flag was changed to a soft disable mask, xmon and register dump code was not updated to reflect that, which is confusing ('SOFTE: 1' previously meant interrupts were soft enabled, currently it means the opposite, the general interrupt type has been disabled). Fix this by using the name irqmask, and printing it in hex. Signed-off-by:Balbir Singh <bsingharora@gmail.com> Signed-off-by:
-
Nicholas Piggin authored
When soft enabled was changed to irq disabled mask, this test missed being converted (although the equivalent book3s test was converted). The PMU drivers consider it an NMI when they take a PMI while general interrupts are disabled. This change restores that behaviour. Fixes: 01417c6c ("powerpc/64: Change soft_enabled from flag to bitmask") Signed-off-by:
-
Nicholas Piggin authored
These are not local timer interrupts but IPIs. It's good to be able to see how timer offloading is behaving, so split these out into their own category. Signed-off-by:
-
