- 14 Jun, 2009 9 commits
-
-
Paul Mundt authored
The irqaction.mask is legacy code that is wholly unused and going away, so simply drop its use in the SH drivers completely. Fixes up build failures in -next. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
-
Paul Mundt authored
Presently the earlytimer probe handles the clockevents driver, which requires that the clockevents driver be registered first. This bumps it up by 1 to include the clocksource device, which can be safely ignored if it doesn't exist, as we will simply error out on that path and defer to the jiffies clocksource. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
-
Paul Mundt authored
The generic sched_clock() handles INITIAL_JIFFIES now as well, so we can just use that instead. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
-
Paul Mundt authored
These were handled through late_time_init due to kmalloc() and friends not being available earlier on previously. Now with slab caches being available much earlier, this is no longer necessary, and we can move the initialization up to an earlier point. One of the benefits with this is that printk times are available a bit earlier! Signed-off-by: Paul Mundt <lethal@linux-sh.org>
-
Rusty Russell authored
Use the accessors rather than frobbing bits directly (the new versions are const). Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> Signed-off-by: Mike Travis <travis@sgi.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
-
Rusty Russell authored
Makes code futureproof against the impending change to mm->cpu_vm_mask. It's also a chance to use the new cpumask_ ops which take a pointer (the older ones are deprecated, but there's no hurry for arch code). Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
-
Rusty Russell authored
We're weaning the core code off handing cpumask's around on-stack. This introduces arch_send_call_function_ipi_mask(), and by defining it, the old arch_send_call_function_ipi is defined by the core code. Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
-
Rusty Russell authored
cpumask_of_pcibus() is the new version. Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
-
Huang Weiyi authored
Signed-off-by: Huang Weiyi <weiyi.huang@gmail.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
-
- 11 Jun, 2009 31 commits
-
-
Paul Mundt authored
Now that the slab allocators are available much earlier, this triggers a the slab_is_available() warning when registering the interrupt controller. Convert to kzalloc() with GFP_NOWAIT, as per the generic changes. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
-
Paul Mundt authored
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
-
-
git://linux-arm.org/linux-2.6Linus Torvalds authored
* 'for-linus' of git://linux-arm.org/linux-2.6: kmemleak: Add the corresponding MAINTAINERS entry kmemleak: Simple testing module for kmemleak kmemleak: Enable the building of the memory leak detector kmemleak: Remove some of the kmemleak false positives kmemleak: Add modules support kmemleak: Add kmemleak_alloc callback from alloc_large_system_hash kmemleak: Add the vmalloc memory allocation/freeing hooks kmemleak: Add the slub memory allocation/freeing hooks kmemleak: Add the slob memory allocation/freeing hooks kmemleak: Add the slab memory allocation/freeing hooks kmemleak: Add documentation on the memory leak detector kmemleak: Add the base support Manual conflict resolution (with the slab/earlyboot changes) in: drivers/char/vt.c init/main.c mm/slab.c
-
Linus Torvalds authored
Merge branch 'perfcounters-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'perfcounters-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: (574 commits) perf_counter: Turn off by default perf_counter: Add counter->id to the throttle event perf_counter: Better align code perf_counter: Rename L2 to LL cache perf_counter: Standardize event names perf_counter: Rename enums perf_counter tools: Clean up u64 usage perf_counter: Rename perf_counter_limit sysctl perf_counter: More paranoia settings perf_counter: powerpc: Implement generalized cache events for POWER processors perf_counters: powerpc: Add support for POWER7 processors perf_counter: Accurate period data perf_counter: Introduce struct for sample data perf_counter tools: Normalize data using per sample period data perf_counter: Annotate exit ctx recursion perf_counter tools: Propagate signals properly perf_counter tools: Small frequency related fixes perf_counter: More aggressive frequency adjustment perf_counter/x86: Fix the model number of Intel Core2 processors perf_counter, x86: Correct some event and umask values for Intel processors ...
-
Linus Torvalds authored
Merge branch 'topic/slab/earlyboot' of git://git.kernel.org/pub/scm/linux/kernel/git/penberg/slab-2.6 * 'topic/slab/earlyboot' of git://git.kernel.org/pub/scm/linux/kernel/git/penberg/slab-2.6: vgacon: use slab allocator instead of the bootmem allocator irq: use kcalloc() instead of the bootmem allocator sched: use slab in cpupri_init() sched: use alloc_cpumask_var() instead of alloc_bootmem_cpumask_var() memcg: don't use bootmem allocator in setup code irq/cpumask: make memoryless node zero happy x86: remove some alloc_bootmem_cpumask_var calling vt: use kzalloc() instead of the bootmem allocator sched: use kzalloc() instead of the bootmem allocator init: introduce mm_init() vmalloc: use kzalloc() instead of alloc_bootmem() slab: setup allocators earlier in the boot sequence bootmem: fix slab fallback on numa bootmem: use slab if bootmem is no longer available
-
git://git.kernel.org/pub/scm/linux/kernel/git/shaggy/jfs-2.6Linus Torvalds authored
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/shaggy/jfs-2.6: jfs: Add missing mutex_unlock call to error path missing unlock in jfs_quota_write()
-
Linus Torvalds authored
Merge branch 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: x86: memtest: use pointers of equal type for comparison
-
Oleg Nesterov authored
slow_work_thread() sleeps on slow_work_thread_wq without WQ_FLAG_EXCLUSIVE, this means that slow_work_enqueue()->__wake_up(nr_exclusive => 1) wakes up all kslowd threads. This is not what we want, so we change slow_work_thread() to use prepare_to_wait_exclusive() instead. Signed-off-by: Oleg Nesterov <oleg@redhat.com> Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
git://git.kernel.org/pub/scm/linux/kernel/git/jgarzik/libata-devLinus Torvalds authored
* 'upstream-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jgarzik/libata-dev: [libata] ata_piix: Enable parallel scan sata_nv: use hardreset only for post-boot probing [libata] ahci: Restore SB600 SATA controller 64 bit DMA ata_piix: Remove stale comment ata_piix: Turn on hotplugging support for older chips ahci: misc cleanups for EM stuff [libata] get rid of ATA_MAX_QUEUE loop in ata_qc_complete_multiple() v2 sata_sil: enable 32-bit PIO sata_sx4: speed up ECC initialization libata-sff: avoid byte swapping in ata_sff_data_xfer() [libata] ahci: use less error-prone array initializers
-
git://git.kernel.dk/linux-2.6-blockLinus Torvalds authored
* 'for-2.6.31' of git://git.kernel.dk/linux-2.6-block: (153 commits) block: add request clone interface (v2) floppy: fix hibernation ramdisk: remove long-deprecated "ramdisk=" boot-time parameter fs/bio.c: add missing __user annotation block: prevent possible io_context->refcount overflow Add serial number support for virtio_blk, V4a block: Add missing bounce_pfn stacking and fix comments Revert "block: Fix bounce limit setting in DM" cciss: decode unit attention in SCSI error handling code cciss: Remove no longer needed sendcmd reject processing code cciss: change SCSI error handling routines to work with interrupts enabled. cciss: separate error processing and command retrying code in sendcmd_withirq_core() cciss: factor out fix target status processing code from sendcmd functions cciss: simplify interface of sendcmd() and sendcmd_withirq() cciss: factor out core of sendcmd_withirq() for use by SCSI error handling code cciss: Use schedule_timeout_uninterruptible in SCSI error handling code block: needs to set the residual length of a bidi request Revert "block: implement blkdev_readpages" block: Fix bounce limit setting in DM Removed reference to non-existing file Documentation/PCI/PCI-DMA-mapping.txt ... Manually fix conflicts with tracing updates in: block/blk-sysfs.c drivers/ide/ide-atapi.c drivers/ide/ide-cd.c drivers/ide/ide-floppy.c drivers/ide/ide-tape.c include/trace/events/block.h kernel/trace/blktrace.c
-
Matt Fleming authored
Ftrace on sh handles nop'ing out trace function calls differently than other architectures. Instead of inserting NOP instructions in place of the call to the function tracer we branch over the call instructions and continue executing the main body of the function. This patch fixes a bug in the implementation of ftrace_modify_code() where we check that the old value of the code we're about to replace is an expected one. In the ftrace_make_call() code path ftrace_modify_code() was comparing the old instruction value with NOP instructions. The compare was failing because we never actually insert NOP instructions. It makes sense to just get rid of the NOP instructions in ftrace_nop and compare the old code with the address of the function body if we're expecting ftrace to have nop'd out the function trace call. Signed-off-by: Matt Fleming <matt@console-pimps.org>
-
git://git.kernel.org/pub/scm/linux/kernel/git/steve/gfs2-2.6-nmwLinus Torvalds authored
* git://git.kernel.org/pub/scm/linux/kernel/git/steve/gfs2-2.6-nmw: (25 commits) GFS2: Merge gfs2_get_sb into gfs2_get_sb_meta GFS2: Fix cache coherency between truncate and O_DIRECT read GFS2: Fix locking issue mounting gfs2meta fs GFS2: Remove unused variable GFS2: smbd proccess hangs with flock() call. GFS2: Remove args subdir from gfs2 sysfs files GFS2: Remove lockstruct subdir from gfs2 sysfs files GFS2: Move gfs2_unlink_ok into ops_inode.c GFS2: Move gfs2_readlinki into ops_inode.c GFS2: Move gfs2_rmdiri into ops_inode.c GFS2: Merge mount.c and ops_super.c into super.c GFS2: Clean up some file names GFS2: Be more aggressive in reclaiming unlinked inodes GFS2: Add a rgrp bitmap full flag GFS2: Improve resource group error handling GFS2: Don't warn when delete inode fails on ro filesystem GFS2: Update docs GFS2: Umount recovery race fix GFS2: Remove a couple of unused sysfs entries GFS2: Add commit= mount option ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/bp/bpLinus Torvalds authored
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/bp/bp: (26 commits) amd64_edac: add MAINTAINERS entry EDAC: do not enable modules by default amd64_edac: do not enable module by default amd64_edac: add module registration routines amd64_edac: add ECC reporting initializers amd64_edac: add EDAC core-related initializers amd64_edac: add error decoding logic amd64_edac: add ECC chipkill syndrome mapping table amd64_edac: add per-family descriptors amd64_edac: add F10h-and-later methods-p3 amd64_edac: add F10h-and-later methods-p2 amd64_edac: add F10h-and-later methods-p1 amd64_edac: add k8-specific methods amd64_edac: assign DRAM chip select base and mask in a family-specific way amd64_edac: add helper to dump relevant registers amd64_edac: add DRAM address type conversion facilities amd64_edac: add functionality to compute the DRAM hole amd64_edac: add sys addr to memory controller mapping helpers amd64_edac: add memory scrubber interface amd64_edac: add MCA error types ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/lethal/sh-2.6Linus Torvalds authored
* git://git.kernel.org/pub/scm/linux/kernel/git/lethal/sh-2.6: (266 commits) sh: Tie sparseirq in to Kconfig. sh: Wire up sys_rt_tgsigqueueinfo. sh: Fix sys_pwritev() syscall table entry for sh32. sh: Fix sh4a llsc-based cmpxchg() sh: sh7724: Add JPU support sh: sh7724: INTC setting update sh: sh7722 clock framework rewrite sh: sh7366 clock framework rewrite sh: sh7343 clock framework rewrite sh: sh7724 clock framework rewrite V3 sh: sh7723 clock framework rewrite V2 sh: add enable()/disable()/set_rate() to div6 code sh: add AP325RXA mode pin configuration sh: add Migo-R mode pin configuration sh: sh7722 mode pin definitions sh: sh7724 mode pin comments sh: sh7723 mode pin V2 sh: rework mode pin code sh: clock div6 helper code sh: clock div4 frequency table offset fix ...
-
git://git.kernel.org/pub/scm/virt/kvm/kvmLinus Torvalds authored
* 'kvm-updates/2.6.31' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (138 commits) KVM: Prevent overflow in largepages calculation KVM: Disable large pages on misaligned memory slots KVM: Add VT-x machine check support KVM: VMX: Rename rmode.active to rmode.vm86_active KVM: Move "exit due to NMI" handling into vmx_complete_interrupts() KVM: Disable CR8 intercept if tpr patching is active KVM: Do not migrate pending software interrupts. KVM: inject NMI after IRET from a previous NMI, not before. KVM: Always request IRQ/NMI window if an interrupt is pending KVM: Do not re-execute INTn instruction. KVM: skip_emulated_instruction() decode instruction if size is not known KVM: Remove irq_pending bitmap KVM: Do not allow interrupt injection from userspace if there is a pending event. KVM: Unprotect a page if #PF happens during NMI injection. KVM: s390: Verify memory in kvm run KVM: s390: Sanity check on validity intercept KVM: s390: Unlink vcpu on destroy - v2 KVM: s390: optimize float int lock: spin_lock_bh --> spin_lock KVM: s390: use hrtimer for clock wakeup from idle - v2 KVM: s390: Fix memory slot versus run - v3 ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/sfrench/cifs-2.6Linus Torvalds authored
* git://git.kernel.org/pub/scm/linux/kernel/git/sfrench/cifs-2.6: cifs: remove never-used in6_addr option cifs: add addr= mount option alias for ip= [CIFS] Add mention of new mount parm (forceuid) to cifs readme cifs: make overriding of ownership conditional on new mount options cifs: fix IPv6 address length check cifs: clean up set_cifs_acl interfaces cifs: reorganize get_cifs_acl [CIFS] Update readme to indicate change to default mount (serverino) cifs: make serverino the default when mounting cifs: rename cifs_iget to cifs_root_iget cifs: make cnvrtDosUnixTm take a little-endian args and an offset cifs: have cifs_NTtimeToUnix take a little-endian arg cifs: tighten up default file_mode/dir_mode cifs: fix artificial limit on reading symlinks
-
Linus Torvalds authored
Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/security-testing-2.6 * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/security-testing-2.6: (44 commits) nommu: Provide mmap_min_addr definition. TOMOYO: Add description of lists and structures. TOMOYO: Remove unused field. integrity: ima audit dentry_open failure TOMOYO: Remove unused parameter. security: use mmap_min_addr indepedently of security models TOMOYO: Simplify policy reader. TOMOYO: Remove redundant markers. SELinux: define audit permissions for audit tree netlink messages TOMOYO: Remove unused mutex. tomoyo: avoid get+put of task_struct smack: Remove redundant initialization. integrity: nfsd imbalance bug fix rootplug: Remove redundant initialization. smack: do not beyond ARRAY_SIZE of data integrity: move ima_counts_get integrity: path_check update IMA: Add __init notation to ima functions IMA: Minimal IMA policy and boot param for TCB IMA policy selinux: remove obsolete read buffer limit from sel_read_bool ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4Linus Torvalds authored
* 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4: (49 commits) ext4: Avoid corrupting the uninitialized bit in the extent during truncate ext4: Don't treat a truncation of a zero-length file as replace-via-truncate ext4: fix dx_map_entry to support 256k directory blocks ext4: truncate the file properly if we fail to copy data from userspace ext4: Avoid leaking blocks after a block allocation failure ext4: Change all super.c messages to print the device ext4: Get rid of EXTEND_DISKSIZE flag of ext4_get_blocks_handle() ext4: super.c whitespace cleanup jbd2: Fix minor typos in comments in fs/jbd2/journal.c ext4: Clean up calls to ext4_get_group_desc() ext4: remove unused function __ext4_write_dirty_metadata ext2: Fix memory leak in ext2_fill_super() in case of a failed mount ext3: Fix memory leak in ext3_fill_super() in case of a failed mount ext4: Fix memory leak in ext4_fill_super() in case of a failed mount ext4: down i_data_sem only for read when walking tree for fiemap ext4: Add a comprehensive block validity check to ext4_get_blocks() ext4: Clean up ext4_get_blocks() so it does not depend on bh_result->b_state ext4: Merge ext4_da_get_block_write() into mpage_da_map_blocks() ext4: Add BUG_ON debugging checks to noalloc_get_block_write() ext4: Add documentation to the ext4_*get_block* functions ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/bart/ide-2.6Linus Torvalds authored
* 'for-2.6.31' of git://git.kernel.org/pub/scm/linux/kernel/git/bart/ide-2.6: (28 commits) ide-tape: fix debug call alim15x3: Remove historical hacks, re-enable init_hwif for PowerPC ide-dma: don't reset request fields on dma_timeout_retry() ide: drop rq->data handling from ide_map_sg() ide-atapi: kill unused fields and callbacks ide-tape: simplify read/write functions ide-tape: use byte size instead of sectors on rw issue functions ide-tape: unify r/w init paths ide-tape: kill idetape_bh ide-tape: use standard data transfer mechanism ide-tape: use single continuous buffer ide-atapi,tape,floppy: allow ->pc_callback() to change rq->data_len ide-tape,floppy: fix failed command completion after request sense ide-pm: don't abuse rq->data ide-cd,atapi: use bio for internal commands ide-atapi: convert ide-{floppy,tape} to using preallocated sense buffer ide-cd: convert to using generic sense request ide: add helpers for preparing sense requests ide-cd: don't abuse rq->buffer ide-atapi: don't abuse rq->buffer ...
-
Pekka Enberg authored
Slab is initialized before the console subsystem so use the slab allocator in vgacon_scrollback_startup(). Signed-off-by: Pekka Enberg <penberg@cs.helsinki.fi>
-
Pekka Enberg authored
Fixes the following problem: [ 0.000000] Experimental hierarchical RCU init done. [ 0.000000] NR_IRQS:4352 nr_irqs:256 [ 0.000000] ------------[ cut here ]------------ [ 0.000000] WARNING: at mm/bootmem.c:537 alloc_arch_preferred_bootmem+0x40/0x7e() [ 0.000000] Hardware name: To Be Filled By O.E.M. [ 0.000000] Pid: 0, comm: swapper Not tainted 2.6.30-tip-02161-g7a74539-dirty #59709 [ 0.000000] Call Trace: [ 0.000000] [<ffffffff823f8c8e>] ? alloc_arch_preferred_bootmem+0x40/0x7e [ 0.000000] [<ffffffff81067168>] warn_slowpath_common+0x88/0xcb [ 0.000000] [<ffffffff810671d2>] warn_slowpath_null+0x27/0x3d [ 0.000000] [<ffffffff823f8c8e>] alloc_arch_preferred_bootmem+0x40/0x7e [ 0.000000] [<ffffffff823f9307>] ___alloc_bootmem_nopanic+0x4e/0xec [ 0.000000] [<ffffffff823f93c5>] ___alloc_bootmem+0x20/0x61 [ 0.000000] [<ffffffff823f962e>] __alloc_bootmem+0x1e/0x34 [ 0.000000] [<ffffffff823f757c>] early_irq_init+0x6d/0x118 [ 0.000000] [<ffffffff823e0140>] ? early_idt_handler+0x0/0x71 [ 0.000000] [<ffffffff823e0cf7>] start_kernel+0x192/0x394 [ 0.000000] [<ffffffff823e0140>] ? early_idt_handler+0x0/0x71 [ 0.000000] [<ffffffff823e02ad>] x86_64_start_reservations+0xb4/0xcf [ 0.000000] [<ffffffff823e0000>] ? __init_begin+0x0/0x140 [ 0.000000] [<ffffffff823e0420>] x86_64_start_kernel+0x158/0x17b [ 0.000000] ---[ end trace a7919e7f17c0a725 ]--- [ 0.000000] Fast TSC calibration using PIT [ 0.000000] Detected 2002.510 MHz processor. [ 0.004000] Console: colour VGA+ 80x25 Reported-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Pekka Enberg <penberg@cs.helsinki.fi>
-
Pekka Enberg authored
Lets not use the bootmem allocator in cpupri_init() as slab is already up when it is run. Cc: Ingo Molnar <mingo@elte.hu> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Yinghai Lu <yinghai@kernel.org> Signed-off-by: Pekka Enberg <penberg@cs.helsinki.fi>
-
Pekka Enberg authored
Slab is initialized when sched_init() runs now so lets use alloc_cpumask_var(). Cc: Ingo Molnar <mingo@elte.hu> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Yinghai Lu <yinghai@kernel.org> Signed-off-by: Pekka Enberg <penberg@cs.helsinki.fi>
-
Yinghai Lu authored
The bootmem allocator is no longer available for page_cgroup_init() because we set up the kernel slab allocator much earlier now. Cc: Ingo Molnar <mingo@elte.hu> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Yinghai Lu <yinghai@kernel.org> Signed-off-by: Pekka Enberg <penberg@cs.helsinki.fi>
-
Yinghai Lu authored
Don't hardcode to node zero for early boot IRQ setup memory allocations. [ penberg@cs.helsinki.fi: minor cleanups ] Cc: Ingo Molnar <mingo@elte.hu> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Yinghai Lu <yinghai@kernel.org> Signed-off-by: Pekka Enberg <penberg@cs.helsinki.fi>
-
Yinghai Lu authored
Now that we set up the slab allocator earlier, we can get rid of some alloc_bootmem_cpumask_var() calls in boot code. Cc: Ingo Molnar <mingo@elte.hu> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Yinghai Lu <yinghai@kernel.org> Signed-off-by: Pekka Enberg <penberg@cs.helsinki.fi>
-
Pekka Enberg authored
Now that kmem_cache_init() happens before console_init(), we should use kzalloc() and not the bootmem allocator. Signed-off-by: Pekka Enberg <penberg@cs.helsinki.fi>
-
Pekka Enberg authored
Now that kmem_cache_init() happens before sched_init(), we should use kzalloc() and not the bootmem allocator. Signed-off-by: Pekka Enberg <penberg@cs.helsinki.fi>
-
Pekka Enberg authored
As suggested by Christoph Lameter, introduce mm_init() now that we initialize all the kernel memory allocations together. Cc: Christoph Lameter <cl@linux-foundation.org> Signed-off-by: Pekka Enberg <penberg@cs.helsinki.fi>
-
Pekka Enberg authored
We can call vmalloc_init() after kmem_cache_init() and use kzalloc() instead of the bootmem allocator when initializing vmalloc data structures. Acked-by: Johannes Weiner <hannes@cmpxchg.org> Acked-by: Linus Torvalds <torvalds@linux-foundation.org> Acked-by: Nick Piggin <npiggin@suse.de> Cc: Ingo Molnar <mingo@elte.hu> Cc: Yinghai Lu <yinghai@kernel.org> Signed-off-by: Pekka Enberg <penberg@cs.helsinki.fi>
-