- 11 Nov, 2010 5 commits
-
-
Jon Mason authored
Add the ability in the vxge driver to flash firmware via ethtool. Updated to include comments from Ben Hutchings. Signed-off-by: Jon Mason <jon.mason@exar.com> Signed-off-by: Ram Vepa <ram.vepa@exar.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Jon Mason authored
It is possible for multiple callers to access the firmware interface for the same vpath simultaneously, resulting in uncertain output. Add locks to serialize access. Also, make functions only accessed locally static, thus requiring some movement of code blocks. Signed-off-by: Jon Mason <jon.mason@exar.com> Signed-off-by: Ram Vepa <ram.vepa@exar.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Jon Mason authored
Remove all of the unnecessary debug printk indirection and temporary variables for vxge_debug_ll and vxge_assert. Signed-off-by: Jon Mason <jon.mason@exar.com> Signed-off-by: Ram Vepa <ram.vepa@exar.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Jon Mason authored
Wait for the receive traffic to become idle before attempting to close or reset the adapter. To enable the processing of packets while Receive Idle, move the clearing of __VXGE_STATE_CARD_UP bit in vxge_close to after it. Also, modify the return value of the ISR when the adapter is down to IRQ_HANDLED. Otherwise there are unhandled interrupts for the device. Signed-off-by: Jon Mason <jon.mason@exar.com> Signed-off-by: Ram Vepa <ram.vepa@exar.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Jon Mason authored
Enable RSS hashing and add ability to pass up the adapter calculated rx hash up the network stack (if feature is available). Add the ability to enable/disable feature via ethtool, which requires that the adapter is not running at the time. Other miscellaneous cleanups and fixes required to get RSS working. Signed-off-by: Jon Mason <jon.mason@exar.com> Signed-off-by: Ram Vepa <ram.vepa@exar.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
- 10 Nov, 2010 2 commits
-
-
Ron Mercer authored
Signed-off-by: Jitendra Kalsaria <jitendra.kalsaria@qlogic.com> Signed-off-by: Ron Mercer <ron.mercer@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Ron Mercer authored
By default we add firmware information to ethtool get regs. Optionally firmware info can instead be sent to log. Signed-off-by: Jitendra Kalsaria <jitendra.kalsaria@qlogic.com> Signed-off-by: Ron Mercer <ron.mercer@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
- 09 Nov, 2010 5 commits
-
-
Joe Perches authored
Coalesce long formats. Align arguments. Remove KERN_<level>. Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Joe Perches authored
Coalesce long formats. Add missing newlines. Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Joe Perches authored
Add missing newlines. Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Joe Perches authored
Add missing newlines. Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Eric Dumazet authored
Some network drivers use old TX_TIMEOUT definitions, assuming HZ=100 of old kernels. Convert these definitions to include HZ, since HZ can be 1000 these days. Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
- 08 Nov, 2010 28 commits
-
-
Eric Dumazet authored
unix_dgram_poll() is pretty expensive to check POLLOUT status, because it has to lock the socket to get its peer, take a reference on the peer to check its receive queue status, and queue another poll_wait on peer_wait. This all can be avoided if the process calling unix_dgram_poll() is not interested in POLLOUT status. It makes unix_dgram_recvmsg() faster by not queueing irrelevant pollers in peer_wait. On a test program provided by Alan Crequy : Before: real 0m0.211s user 0m0.000s sys 0m0.208s After: real 0m0.044s user 0m0.000s sys 0m0.040s Suggested-by: Davide Libenzi <davidel@xmailserver.org> Reported-by: Alban Crequy <alban.crequy@collabora.co.uk> Acked-by: Davide Libenzi <davidel@xmailserver.org> Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Eric Dumazet authored
Alban Crequy reported a problem with connected dgram af_unix sockets and provided a test program. epoll() would miss to send an EPOLLOUT event when a thread unqueues a packet from the other peer, making its receive queue not full. This is because unix_dgram_poll() fails to call sock_poll_wait(file, &unix_sk(other)->peer_wait, wait); if the socket is not writeable at the time epoll_ctl(ADD) is called. We must call sock_poll_wait(), regardless of 'writable' status, so that epoll can be notified later of states changes. Misc: avoids testing twice (sk->sk_shutdown & RCV_SHUTDOWN) Reported-by: Alban Crequy <alban.crequy@collabora.co.uk> Cc: Davide Libenzi <davidel@xmailserver.org> Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Acked-by: Davide Libenzi <davidel@xmailserver.org> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Eric Dumazet authored
Instead of wakeup all sleepers, use wake_up_interruptible_sync_poll() to wakeup only ones interested into writing the socket. This patch is a specialization of commit 37e5540b (epoll keyed wakeups: make sockets use keyed wakeups). On a test program provided by Alan Crequy : Before: real 0m3.101s user 0m0.000s sys 0m6.104s After: real 0m0.211s user 0m0.000s sys 0m0.208s Reported-by: Alban Crequy <alban.crequy@collabora.co.uk> Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Cc: Davide Libenzi <davidel@xmailserver.org> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Eric Dumazet authored
While tracking dev_base_lock users, I found decnet used it in dnet_select_source(), but for a wrong purpose: Writers only hold RTNL, not dev_base_lock, so readers must use RCU if they cannot use RTNL. Adds an rcu_head in struct dn_ifaddr and handle proper RCU management. Adds __rcu annotation in dn_route as well. Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Acked-by: Steven Whitehouse <swhiteho@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Eric Dumazet authored
bond_info_seq_start() uses a read_lock(&dev_base_lock) to make sure device doesn’t disappear. Same goal can be achieved using RCU. Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Eric Dumazet authored
dev_base_lock is the legacy way to lock the device list, and is planned to disappear. (writers hold RTNL, readers hold RCU lock) Convert aoecmd_cfg_pkts() to RCU locking. Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Cc: "Ed L. Cashin" <ecashin@coraid.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Arce, Abraham authored
Add suspend/resume support using default open/stop interface methods to do hardware dependant operations. On suspend, same low power state (soft power mode) will be kept, the following blocks will be disabled: - Internal PLL Clock - Tx/Rx PHY - MAC - SPI Interface Signed-off-by: Abraham Arce <x0066660@ti.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
David S. Miller authored
-
Pavel Emelyanov authored
The sgs allocation error path leaks the allocated message. Signed-off-by: Pavel Emelyanov <xemul@openvz.org> Acked-by: Andy Grover <andy.grover@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Frank Blaschka authored
QDIO is running independent from netdevice state. We are not allowed to schedule NAPI in case the netdevice is not open. Signed-off-by: Frank Blaschka <frank.blaschka@de.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Ursula Braun authored
For a certain Hipersockets specific error code in the xmit path, the qeth driver tries to invoke dev_queue_xmit again. Commit 79640a4c introduces a busylock causing locking problems in case of re-invoked dev_queue_xmit by qeth. This patch removes the attempts to retry packet sending with dev_queue_xmit from the qeth driver. Signed-off-by: Ursula Braun <ursula.braun@de.ibm.com> Signed-off-by: Frank Blaschka <frank.blaschka@de.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Junchang Wang authored
This fix a bug reported by backyes. Right the first time pktgen's using queue_map that's not been initialized by set_cur_queue_map(pkt_dev); Signed-off-by: Junchang Wang <junchangwang@gmail.com> Signed-off-by: Backyes <backyes@mail.ustc.edu.cn> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Guillaume Chazarain authored
After e6484930: net: allocate tx queues in register_netdevice These calls make net drivers oops at load time, so let's avoid people git-bisect'ing known problems. Signed-off-by: Guillaume Chazarain <guichaz@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Guillaume Chazarain authored
After e6484930: net: allocate tx queues in register_netdevice It causes an Oops at skge_probe() time. Signed-off-by: Guillaume Chazarain <guichaz@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Shan Wei authored
The type of FRAG6_CB(prev)->offset is int, skb->len is *unsigned* int, and offset is int. Without this patch, type conversion occurred to this expression, when (FRAG6_CB(prev)->offset + prev->len) is less than offset. Signed-off-by: Shan Wei <shanwei@cn.fujitsu.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
stephen hemminger authored
The basic classifier keeps statistics but does not report it to user space. This showed up when using basic classifier (with police) as a default catch all on ingress; no statistics were reported. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
David Woodhouse authored
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
David Woodhouse authored
The existing 'FirmwareVersion' attribute only covers the DSP firmware as provided by Conexant; not the overall version of the device firmware. We do want to be able to see the full version number too. Signed-off-by: David Woodhouse <David.Woodhouse@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4Linus Torvalds authored
* 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4: ext4: Add new ext4 inode tracepoints ext4: Don't call sb_issue_discard() in ext4_free_blocks() ext4: do not try to grab the s_umount semaphore in ext4_quota_off ext4: fix potential race when freeing ext4_io_page structures ext4: handle writeback of inodes which are being freed ext4: initialize the percpu counters before replaying the journal ext4: "ret" may be used uninitialized in ext4_lazyinit_thread() ext4: fix lazyinit hang after removing request
-
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty-2.6Linus Torvalds authored
* git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty-2.6: TTY: move .gitignore from drivers/char/ to drivers/tty/vt/ TTY: create drivers/tty/vt and move the vt code there TTY: create drivers/tty and move the tty core files there
-
Linus Torvalds authored
Merge branch 'staging-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging-next-2.6 * 'staging-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging-next-2.6: Staging: ath6kl: remove empty files that mess with 'distclean' staging: ath6kl: Fixing the driver to use modified mmc_host structure Staging: solo6x10: fix build problem
-
Linus Torvalds authored
Merge branch 'rmobile-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/lethal/sh-2.6 * 'rmobile-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/lethal/sh-2.6: mmc: sh_mmcif: Convert extern inline to static inline. ARM: mach-shmobile: Allow GPIO chips to register IRQ mappings. ARM: mach-shmobile: fix sh7372 after a recent clock framework rework ARM: mach-shmobile: include drivers/sh/Kconfig ARM: mach-shmobile: ap4evb: Add HDMI sound support ARM: mach-shmobile: clock-sh7372: Add FSIDIV clock support ARM: shmobile: remove sh_timer_config clk member
-
git://git.kernel.org/pub/scm/linux/kernel/git/lethal/sh-2.6Linus Torvalds authored
* 'sh-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/lethal/sh-2.6: sh: clkfwk: Fix up checkpatch warnings. sh: make some needlessly global sh7724 clocks static sh: add clk_round_parent() to optimize parent clock rate sh: Simplify phys_addr_mask()/PTE_PHYS_MASK for 29/32-bit. sh: nommu: Support building without an uncached mapping. sh: nommu: use 32-bit phys mode. sh: mach-se: Fix up SE7206 no ioport build. sh: intc: Update for single IRQ reservation helper. sh: clkfwk: Fix up rate rounding error handling. sh: mach-se: Rip out superfluous 7751 PIO routines. sh: mach-se: Rip out superfluous 770x PIO routines. sh: mach-edosk7705: Kill off machtype, consolidate board def. sh: mach-edosk7705: update for this century, kill off PIO trapping. sh: mach-se: Rip out superfluous 7206 PIO routines. sh: mach-systemh: Kill off dead board. sh: mach-snapgear: Kill off machtype, consolidate board def. sh: mach-snapgear: Rip out superfluous PIO routines. sh: mach-microdev: SuperIO-relative ioport mapping.
-
Theodore Ts'o authored
Add ext4_evict_inode, ext4_drop_inode, ext4_mark_inode_dirty, and ext4_begin_ordered_truncate() Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
-
Theodore Ts'o authored
Commit 5c521830 (ext4: Support discard requests when running in no-journal mode) attempts to add sb_issue_discard() for data blocks (in data=writeback mode) and in no-journal mode. Unfortunately, this no longer works, because in commit dd3932ed (block: remove BLKDEV_IFL_WAIT), sb_issue_discard() only presents a synchronous interface, and there are times when we call ext4_free_blocks() when we are are holding a spinlock, or are otherwise in an atomic context. For now, I've removed the call to sb_issue_discard() to prevent a deadlock or (if spinlock debugging is enabled) failures like this: BUG: scheduling while atomic: rc.sysinit/1376/0x00000002 Pid: 1376, comm: rc.sysinit Not tainted 2.6.36-ARCH #1 Call Trace: [<ffffffff810397ce>] __schedule_bug+0x5e/0x70 [<ffffffff81403110>] schedule+0x950/0xa70 [<ffffffff81060bad>] ? insert_work+0x7d/0x90 [<ffffffff81060fbd>] ? queue_work_on+0x1d/0x30 [<ffffffff81061127>] ? queue_work+0x37/0x60 [<ffffffff8140377d>] schedule_timeout+0x21d/0x360 [<ffffffff812031c3>] ? generic_make_request+0x2c3/0x540 [<ffffffff81402680>] wait_for_common+0xc0/0x150 [<ffffffff81041490>] ? default_wake_function+0x0/0x10 [<ffffffff812034bc>] ? submit_bio+0x7c/0x100 [<ffffffff810680a0>] ? wake_bit_function+0x0/0x40 [<ffffffff814027b8>] wait_for_completion+0x18/0x20 [<ffffffff8120a969>] blkdev_issue_discard+0x1b9/0x210 [<ffffffff811ba03e>] ext4_free_blocks+0x68e/0xb60 [<ffffffff811b1650>] ? __ext4_handle_dirty_metadata+0x110/0x120 [<ffffffff811b098c>] ext4_ext_truncate+0x8cc/0xa70 [<ffffffff810d713e>] ? pagevec_lookup+0x1e/0x30 [<ffffffff81191618>] ext4_truncate+0x178/0x5d0 [<ffffffff810eacbb>] ? unmap_mapping_range+0xab/0x280 [<ffffffff810d8976>] vmtruncate+0x56/0x70 [<ffffffff811925cb>] ext4_setattr+0x14b/0x460 [<ffffffff811319e4>] notify_change+0x194/0x380 [<ffffffff81117f80>] do_truncate+0x60/0x90 [<ffffffff811e08fa>] ? security_inode_permission+0x1a/0x20 [<ffffffff811eaec1>] ? tomoyo_path_truncate+0x11/0x20 [<ffffffff81127539>] do_last+0x5d9/0x770 [<ffffffff811278bd>] do_filp_open+0x1ed/0x680 [<ffffffff8140644f>] ? page_fault+0x1f/0x30 [<ffffffff81132bfc>] ? alloc_fd+0xec/0x140 [<ffffffff81118db1>] do_sys_open+0x61/0x120 [<ffffffff81118e8b>] sys_open+0x1b/0x20 [<ffffffff81002e6b>] system_call_fastpath+0x16/0x1b https://bugzilla.kernel.org/show_bug.cgi?id=22302Reported-by: Mathias Burén <mathias.buren@gmail.com> Signed-off-by: "Theodore Ts'o" <tytso@mit.edu> Cc: jiayingz@google.com
-
Dmitry Monakhov authored
It's not needed to sync the filesystem, and it fixes a lock_dep complaint. Signed-off-by: Dmitry Monakhov <dmonakhov@gmail.com> Signed-off-by: "Theodore Ts'o" <tytso@mit.edu> Reviewed-by: Jan Kara <jack@suse.cz>
-
Theodore Ts'o authored
Use an atomic_t and make sure we don't free the structure while we might still be submitting I/O for that page. Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
-
Theodore Ts'o authored
The following BUG can occur when an inode which is getting freed when it still has dirty pages outstanding, and it gets deleted (in this because it was the target of a rename). In ordered mode, we need to make sure the data pages are written just in case we crash before the rename (or unlink) is committed. If the inode is being freed then when we try to igrab the inode, we end up tripping the BUG_ON at fs/ext4/page-io.c:146. To solve this problem, we need to keep track of the number of io callbacks which are pending, and avoid destroying the inode until they have all been completed. That way we don't have to bump the inode count to keep the inode from being destroyed; an approach which doesn't work because the count could have already been dropped down to zero before the inode writeback has started (at which point we're not allowed to bump the count back up to 1, since it's already started getting freed). Thanks to Dave Chinner for suggesting this approach, which is also used by XFS. kernel BUG at /scratch_space/linux-2.6/fs/ext4/page-io.c:146! Call Trace: [<ffffffff811075b1>] ext4_bio_write_page+0x172/0x307 [<ffffffff811033a7>] mpage_da_submit_io+0x2f9/0x37b [<ffffffff811068d7>] mpage_da_map_and_submit+0x2cc/0x2e2 [<ffffffff811069b3>] mpage_add_bh_to_extent+0xc6/0xd5 [<ffffffff81106c66>] write_cache_pages_da+0x2a4/0x3ac [<ffffffff81107044>] ext4_da_writepages+0x2d6/0x44d [<ffffffff81087910>] do_writepages+0x1c/0x25 [<ffffffff810810a4>] __filemap_fdatawrite_range+0x4b/0x4d [<ffffffff810815f5>] filemap_fdatawrite_range+0xe/0x10 [<ffffffff81122a2e>] jbd2_journal_begin_ordered_truncate+0x7b/0xa2 [<ffffffff8110615d>] ext4_evict_inode+0x57/0x24c [<ffffffff810c14a3>] evict+0x22/0x92 [<ffffffff810c1a3d>] iput+0x212/0x249 [<ffffffff810bdf16>] dentry_iput+0xa1/0xb9 [<ffffffff810bdf6b>] d_kill+0x3d/0x5d [<ffffffff810be613>] dput+0x13a/0x147 [<ffffffff810b990d>] sys_renameat+0x1b5/0x258 [<ffffffff81145f71>] ? _atomic_dec_and_lock+0x2d/0x4c [<ffffffff810b2950>] ? cp_new_stat+0xde/0xea [<ffffffff810b29c1>] ? sys_newlstat+0x2d/0x38 [<ffffffff810b99c6>] sys_rename+0x16/0x18 [<ffffffff81002a2b>] system_call_fastpath+0x16/0x1b Reported-by: Nick Bowler <nbowler@elliptictech.com> Signed-off-by: "Theodore Ts'o" <tytso@mit.edu> Tested-by: Nick Bowler <nbowler@elliptictech.com>
-