- 21 Sep, 2017 1 commit
-
-
Dmitry Torokhov authored
Normally, when input device supporting force feedback effects is being destroyed, we try to "flush" currently playing effects, so that the physical device does not continue vibrating (or executing other effects). Unfortunately this does not work well for uinput as flushing of the effects deadlocks with the destroy action: - if device is being destroyed because the file descriptor is being closed, then there is noone to even service FF requests; - if device is being destroyed because userspace sent UI_DEV_DESTROY, while theoretically it could be possible to service FF requests, userspace is unlikely to do so (they'd need to make sure FF handling happens on a separate thread) even if kernel solves the issue with FF ioctls deadlocking with UI_DEV_DESTROY ioctl on udev->mutex. To avoid lockups like the one below, let's install a custom input device flush handler, and avoid trying to flush force feedback effects when we destroying the device, and instead rely on uinput to shut off the device properly. NMI watchdog: Watchdog detected hard LOCKUP on cpu 3 ... <<EOE>> [<ffffffff817a0307>] _raw_spin_lock_irqsave+0x37/0x40 [<ffffffff810e633d>] complete+0x1d/0x50 [<ffffffffa00ba08c>] uinput_request_done+0x3c/0x40 [uinput] [<ffffffffa00ba587>] uinput_request_submit.part.7+0x47/0xb0 [uinput] [<ffffffffa00bb62b>] uinput_dev_erase_effect+0x5b/0x76 [uinput] [<ffffffff815d91ad>] erase_effect+0xad/0xf0 [<ffffffff815d929d>] flush_effects+0x4d/0x90 [<ffffffff815d4cc0>] input_flush_device+0x40/0x60 [<ffffffff815daf1c>] evdev_cleanup+0xac/0xc0 [<ffffffff815daf5b>] evdev_disconnect+0x2b/0x60 [<ffffffff815d74ac>] __input_unregister_device+0xac/0x150 [<ffffffff815d75f7>] input_unregister_device+0x47/0x70 [<ffffffffa00bac45>] uinput_destroy_device+0xb5/0xc0 [uinput] [<ffffffffa00bb2de>] uinput_ioctl_handler.isra.9+0x65e/0x740 [uinput] [<ffffffff811231ab>] ? do_futex+0x12b/0xad0 [<ffffffffa00bb3f8>] uinput_ioctl+0x18/0x20 [uinput] [<ffffffff81241248>] do_vfs_ioctl+0x298/0x480 [<ffffffff81337553>] ? security_file_ioctl+0x43/0x60 [<ffffffff812414a9>] SyS_ioctl+0x79/0x90 [<ffffffff817a04ee>] entry_SYSCALL_64_fastpath+0x12/0x71 Reported-by:
Rodrigo Rivas Costa <rodrigorivascosta@gmail.com> Reported-by:
Clément VUCHENER <clement.vuchener@gmail.com> Fixes: https://bugzilla.kernel.org/show_bug.cgi?id=193741Signed-off-by:
Dmitry Torokhov <dmitry.torokhov@gmail.com>
-
- 15 Sep, 2017 2 commits
-
-
Dmitry Torokhov authored
Prepare second round of input updates for 4.14 merge window.
-
Kai-Heng Feng authored
Similar to other Gigabyte laptops, the touchpad on P57 requires a keyboard reset to detect Elantech touchpad correctly. BugLink: https://bugs.launchpad.net/bugs/1594214Signed-off-by:
Kai-Heng Feng <kai.heng.feng@canonical.com> Cc: stable@vger.kernel.org Signed-off-by:
-
- 12 Sep, 2017 1 commit
-
-
Cameron Gutman authored
We should only see devices with interrupt endpoints. Ignore any other endpoints that we find, so we don't send try to send them interrupt URBs and trigger a WARN down in the USB stack. Reported-by:
Andrey Konovalov <andreyknvl@google.com> Tested-by:
Cameron Gutman <aicommander@gmail.com> Signed-off-by:
-
- 11 Sep, 2017 5 commits
-
-
Dmitry Torokhov authored
Instead of stopping the touchscreen we were starting it in suspend, and disabling it in resume. Fixes: c899afed ("Input: ucb1400_ts - convert to threaded IRQ") Reported-by:
Anton Volkov <avolkov@ispras.ru> Signed-off-by:
-
Luca Ceresoli authored
reg_addr->reg_report_rate is supposed to exist in M06, not M09. The driver is written to skip avoids access to non-existing registers when the register address is NO_REGISTER (0xff). But reg_addr->reg_report_rate is initialized to 0x00 by devm_kzalloc() (in edt_ft5x06_ts_probe()) and not changed thereafter. So the checks do not work and an access to register 0x00 is done. Fix by setting reg_addr->reg_report_rate to NO_REGISTER. Also fix the only place where reg_report_rate is checked against zero instead of NO_REGISTER. Signed-off-by:
Luca Ceresoli <luca@lucaceresoli.net> Signed-off-by:
-
Colin Ian King authored
Don't populate the arrays debounce_packet on the stack, instead make them static. Makes the object code smaller by over 870 bytes: Before: text data bss dec hex filename 30553 9152 0 39705 9b19 drivers/input/mouse/elantech.o After: text data bss dec hex filename 29521 9312 0 38833 97b1 drivers/input/mouse/elantech.o Signed-off-by:
Colin Ian King <colin.king@canonical.com> Signed-off-by:
-
Colin Ian King authored
Don't populate the const array header on the stack, instead make it static. Makes the object code smaller by over 180 bytes: Before: text data bss dec hex filename 6003 1536 0 7539 1d73 surface3_spi.o After: text data bss dec hex filename 5726 1632 0 7358 1cbe surface3_spi.o Signed-off-by:
-
Sergei A. Trusov authored
On some x86 tablets with a Goodix touchscreen, the Windows logo on the front is a capacitive home button. Touching this button results in a touch with bit 4 of the first byte set, while only the lower 4 bits (0-3) are used to indicate the number of touches. Report a KEY_LEFTMETA press when this happens. Note that the hardware might support more than one button, in which case the "id" byte of coor_data would identify the button in question. This is not implemented as we don't have access to hardware with multiple buttons. Signed-off-by:
Sergei A. Trusov <sergei.a.trusov@ya.ru> Acked-by:
Bastien Nocera <hadess@hadess.net> Signed-off-by:
-
- 04 Sep, 2017 3 commits
-
-
Sebastian Reichel authored
Provide a simple driver for PWM controllable vibrators. It will be used by Motorola Droid 4. Signed-off-by:
Sebastian Reichel <sebastian.reichel@collabora.co.uk> Acked-by:
Rob Herring <robh@kernel.org> Signed-off-by:
-
Colin Ian King authored
Don't populate the array seq on the stack, instead make it static. Makes the object code smaller by over 170 bytes: Before: text data bss dec hex filename 13227 3232 0 16459 404b drivers/input/joystick/adi.o After: text data bss dec hex filename 12957 3328 0 16285 3f9d drivers/input/joystick/adi.o Signed-off-by:
-
Dmitry Torokhov authored
Prepare input updates for 4.14 merge window.
-
- 01 Sep, 2017 1 commit
-
-
Colin Ian King authored
Don't populate the array seq on the stack, instead make it static. Makes the object code smaller by over 1100 bytes: Before: text data bss dec hex filename 6152 1216 64 7432 1d08 drivers/input/mouse/byd.o After: text data bss dec hex filename 4974 1280 64 6318 18ae drivers/input/mouse/byd.o Signed-off-by:
-
- 31 Aug, 2017 4 commits
-
-
Michal Simek authored
Fix multiline comments style not to be reported by checkpatch. Signed-off-by:
Michal Simek <michal.simek@xilinx.com> Signed-off-by:
-
Arvind Yadav authored
clk_prepare_enable() can fail here and we must check its return value. Signed-off-by:
Arvind Yadav <arvind.yadav.cs@gmail.com> Signed-off-by:
-
Arvind Yadav authored
clk_prepare_enable() can fail here and we must check its return value. Signed-off-by:
-
Cameron Gutman authored
The PowerA gamepad initialization quirk worked with the PowerA wired gamepad I had around (0x24c6:0x543a), but a user reported [0] that it didn't work for him, even though our gamepads shared the same vendor and product IDs. When I initially implemented the PowerA quirk, I wanted to avoid actually triggering the rumble action during init. My tests showed that my gamepad would work correctly even if it received a rumble of 0 intensity, so that's what I went with. Unfortunately, this apparently isn't true for all models (perhaps a firmware difference?). This non-working gamepad seems to require the real magic rumble packet that the Microsoft driver sends, which actually vibrates the gamepad. To counteract this effect, I still send the old zero-rumble PowerA quirk packet which cancels the rumble effect before the motors can spin up enough to vibrate. [0]: https://github.com/paroj/xpad/issues/48#issuecomment-313904867Reported-by:
Kyle Beauchamp <kyleabeauchamp@gmail.com> Tested-by:
-
- 28 Aug, 2017 3 commits
-
-
Anthony Martin authored
User-modified input settings no longer survive a suspend/resume cycle. Starting with 4.12, the touchpad is reinitialized on every reconnect because the hardware appears to be different. This can be reproduced by running the following as root: echo -n reconnect >/sys/devices/platform/i8042/serio1/drvctl A line like the following will show up in dmesg: [30378.295794] psmouse serio1: synaptics: hardware appears to be different: id(149271-149271), model(114865-114865), caps(d047b3-d047b1), ext(b40000-b40000). Note the single bit difference in caps: bit 1 (SYN_CAP_MULTIFINGER). This happens because we modify our stored copy of the device info capabilities when we enable advanced gesture mode but this change is not reflected in the actual hardware capabilities. It worked in the past because synaptics_query_hardware used to modify the stored synaptics_device_info struct instead of filling in a new one, as it does now. Fix it by no longer faking the SYN_CAP_MULTIFINGER bit when setting advanced gesture mode. This necessitated a small refactoring. Fixes: 6c53694f ("Input: synaptics - split device info into a separate structure") Signed-off-by:Anthony Martin <ality@pbrane.org> Cc: stable@vger.kernel.org Signed-off-by:
-
Danilo Krummrich authored
This driver provides PS/2 serio bus support by implementing bit banging with the GPIO API. The GPIO pins, data and clock, can be configured with a node in the device tree or by generic device properties (GDP). Writing to a device is supported as well, though it is possible timings can not be halt as they are tough and difficult to reach with bit banging. Therefore it can be configured (also in DT and GDP) whether the serio write function should be available for clients. This driver is for development purposes and not recommended for productive use. However, this driver can be useful e.g. when no USB port is available or using old peripherals is desired as PS/2 controller chips getting rare. This driver was tested on bcm2825 and on Kirin 960 and it worked well together with the atkbd and psmouse driver. Signed-off-by:
Danilo Krummrich <danilokrummrich@dk-develop.de> Reviewed-by:
Linus Walleij <linus.walleij@linaro.org> Acked-by:
-
Liang Yan authored
Long pressed key could not show right in XEN vncviewer after tigervnc client changed the way how to send repeat keys, from "Down Up Down Up ..." to "Down Down ... Up". This will report autorepeat to input by checking if same key being pressed, and let handler process it finally. Signed-off-by:
Liang Yan <lyan@suse.com> Signed-off-by:
-
- 24 Aug, 2017 2 commits
-
-
Arvind Yadav authored
amba_id are not supposed to change at runtime. All functions working with const amba_id. So mark the non-const structs as const. Signed-off-by:
-
Masaki Ota authored
Fixed the issue that two finger scroll does not work correctly on V8 protocol. The cause is that V8 protocol X-coordinate decode is wrong at SS4 PLUS device. I added SS4 PLUS X decode definition. Mote notes: the problem manifests itself by the commit e7348396 ("Input: ALPS - fix V8+ protocol handling (73 03 28)"), where a fix for the V8+ protocol was applied. Although the culprit must have been present beforehand, the two-finger scroll worked casually even with the wrongly reported values by some reason. It got broken by the commit above just because it changed x_max value, and this made libinput correctly figuring the MT events. Since the X coord is reported as falsely doubled, the events on the right-half side go outside the boundary, thus they are no longer handled. This resulted as a broken two-finger scroll. One finger event is decoded differently, and it didn't suffer from this problem. The problem was only about MT events. --tiwai Fixes: e7348396 ("Input: ALPS - fix V8+ protocol handling (73 03 28)") Signed-off-by:
Masaki Ota <masaki.ota@jp.alps.com> Tested-by:
Takashi Iwai <tiwai@suse.de> Tested-by:
Paul Donohue <linux-kernel@PaulSD.com> Cc: <stable@vger.kernel.org> Signed-off-by:
-
- 21 Aug, 2017 2 commits
-
-
Sebastian Reichel authored
Provide support for controlling reset pin. If this is not driven correctly the device will be held in reset and will not respond. Acked-by:
-
Sebastian Reichel authored
Switch mxt_data and interrupt to resource managed allocation methods, which cleans up the driver slightly and prepares for adding reset GPIO support. Signed-off-by:
-
- 20 Aug, 2017 1 commit
-
-
Hans de Goede authored
The Dell XPS13 9365 has an INT33D2 ACPI node with no GPIOs, causing the following error in dmesg: [ 7.172275] soc_button_array: probe of INT33D2:00 failed with error -2 This commit silences this, by returning -ENODEV when there are no GPIOs. BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=196679Signed-off-by:
Hans de Goede <hdegoede@redhat.com> Signed-off-by:
-
- 19 Aug, 2017 15 commits
-
-
Arvind Yadav authored
serio_device_id are not supposed to change at runtime. All functions working with serio_device_id provided by <linux/serio.h> work with const serio_device_id. So mark the non-const structs as const. Signed-off-by:
-
Arvind Yadav authored
serio_device_id are not supposed to change at runtime. All functions working with serio_device_id provided by <linux/serio.h> work with const serio_device_id. So mark the non-const structs as const. Signed-off-by:
-
Arvind Yadav authored
serio_device_id are not supposed to change at runtime. All functions working with serio_device_id provided by <linux/serio.h> work with const serio_device_id. So mark the non-const structs as const. Signed-off-by:
-
Arvind Yadav authored
serio_device_id are not supposed to change at runtime. All functions working with serio_device_id provided by <linux/serio.h> work with const serio_device_id. So mark the non-const structs as const. Signed-off-by:
-
Arvind Yadav authored
serio_device_id are not supposed to change at runtime. All functions working with serio_device_id provided by <linux/serio.h> work with const serio_device_id. So mark the non-const structs as const. Signed-off-by:
-
Arvind Yadav authored
serio_device_id are not supposed to change at runtime. All functions working with serio_device_id provided by <linux/serio.h> work with const serio_device_id. So mark the non-const structs as const. Signed-off-by:
-
Arvind Yadav authored
serio_device_id are not supposed to change at runtime. All functions working with serio_device_id provided by <linux/serio.h> work with const serio_device_id. So mark the non-const structs as const. Signed-off-by:
-
Arvind Yadav authored
serio_device_id are not supposed to change at runtime. All functions working with serio_device_id provided by <linux/serio.h> work with const serio_device_id. So mark the non-const structs as const. Signed-off-by:
-
Arvind Yadav authored
serio_device_id are not supposed to change at runtime. All functions working with serio_device_id provided by <linux/serio.h> work with const serio_device_id. So mark the non-const structs as const. Signed-off-by:
-
Arvind Yadav authored
serio_device_id are not supposed to change at runtime. All functions working with serio_device_id provided by <linux/serio.h> work with const serio_device_id. So mark the non-const structs as const. Signed-off-by:
-
Arvind Yadav authored
serio_device_id are not supposed to change at runtime. All functions working with serio_device_id provided by <linux/serio.h> work with const serio_device_id. So mark the non-const structs as const. Signed-off-by:
-
Arvind Yadav authored
serio_device_id are not supposed to change at runtime. All functions working with serio_device_id provided by <linux/serio.h> work with const serio_device_id. So mark the non-const structs as const. Signed-off-by:
-
Arvind Yadav authored
serio_device_id are not supposed to change at runtime. All functions working with serio_device_id provided by <linux/serio.h> work with const serio_device_id. So mark the non-const structs as const. Signed-off-by:
-
Arvind Yadav authored
serio_device_id are not supposed to change at runtime. All functions working with serio_device_id provided by <linux/serio.h> work with const serio_device_id. So mark the non-const structs as const. Signed-off-by:
-
Arvind Yadav authored
serio_device_id are not supposed to change at runtime. All functions working with serio_device_id provided by <linux/serio.h> work with const serio_device_id. So mark the non-const structs as const. Signed-off-by:
-
