Update MAINTAINERS to include lan743x driver
Signed-off-by: Bryan Whitehead <Bryan.Whitehead@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Add main source files for new lan743x driver
Signed-off-by: Bryan Whitehead <Bryan.Whitehead@microchip.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>

Xin Long says:

====================
sctp: add support for some msg_control options from RFC6458

This patchset is to add support for 3 msg_control options described
in RFC6458:

    5.3.7.  SCTP PR-SCTP Information Structure (SCTP_PRINFO)
    5.3.9.  SCTP Destination IPv4 Address Structure (SCTP_DSTADDRV4)
    5.3.10. SCTP Destination IPv6 Address Structure (SCTP_DSTADDRV6)

one send flag described in RFC6458:

    SCTP_SENDALL:  This flag, if set, will cause a one-to-many
    style socket to send the message to all associations that
    are currently established on this socket.  For the one-to-
    one style socket, this flag has no effect.

Note there is another msg_control option:

    5.3.8.  SCTP AUTH Information Structure (SCTP_AUTHINFO)

It's a little complicated, I will post it in another patchset after
this.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

This patch is to add support for snd flag SCTP_SENDALL process
in sendmsg, as described in section 5.3.4 of RFC6458.

With this flag, you can send the same data to all the asocs of
this sk once.
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Acked-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

This patch is to add support for Destination IPv4/6 Address options
for sendmsg, as described in section 5.3.9/10 of RFC6458.

With this option, you can provide more than one destination addrs
to sendmsg when creating asoc, like sctp_connectx.

It's also a necessary send info for sctp_sendv.
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Acked-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

This patch is to add support for PR-SCTP Information for sendmsg,
as described in section 5.3.7 of RFC6458.

With this option, you can specify pr_policy and pr_value for user
data in sendmsg.

It's also a necessary send info for sctp_sendv.
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Acked-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

When addressing a review comment in a early version of the offending
patch a comment where left in which should have been removed. Remove the
comment to keep it consistent with the code.

Fixes: 75efa06f ("ravb: add support for changing MTU")
Reported-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Acked-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The patch adds SLAB_ACCOUNT to flags of net_cachep cache,
which enables accounting of struct net memory to memcg kmem.
Since number of net_namespaces may be significant, user
want to know, how much there were consumed, and control.

Note, that we do not account net_generic to the same memcg,
where net was accounted, moreover, we don't do this at all (*).
We do not want the situation, when single memcg memory deficit
prevents us to register new pernet_operations.

(*)Even despite there is !current process accounting already
available in linux-next. See kmalloc_memcg() there for the details.
Signed-off-by: Kirill Tkhai <ktkhai@virtuozzo.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

All of the conflicts were cases of overlapping changes.

In net/core/devlink.c, we have to make care that the
resouce size_params have become a struct member rather
than a pointer to such an object.
Signed-off-by: David S. Miller <davem@davemloft.net>

Pull ia64 cleanups from Tony Luck:

 - More atomic cleanup from willy

 - Fix a python script to work with version 3

 - Some other small cleanups

* tag 'please-pull-ia64_misc' of git://git.kernel.org/pub/scm/linux/kernel/git/aegl/linux:
  ia64/err-inject: fix spelling mistake: "capapbilities" -> "capabilities"
  ia64/err-inject: Use get_user_pages_fast()
  ia64: doc: tweak whitespace for 'console=' parameter
  ia64: Convert remaining atomic operations
  ia64: convert unwcheck.py to python3

Trivial fix to spelling mistake in debug message text.
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>

At the point of sysfs callback, the call to gup is
done without mmap_sem (or any lock for that matter).
This is racy. As such, use the get_user_pages_fast()
alternative and safely avoid taking the lock, if possible.
Signed-off-by: Davidlohr Bueso <dbueso@suse.de>
Signed-off-by: Tony Luck <tony.luck@intel.com>

CC: Tony Luck <tony.luck@intel.com>
CC: Fenghua Yu <fenghua.yu@intel.com>
CC: linux-ia64@vger.kernel.org
CC: linux-kernel@vger.kernel.org
Signed-off-by: Sergei Trofimovich <slyfox@gentoo.org>
Signed-off-by: Tony Luck <tony.luck@intel.com>

While we've only seen inlining problems with atomic_sub_return(),
the other atomic operations could have the same problem.  Convert all
remaining operations to use the same solution as atomic_sub_return().
Signed-off-by: Matthew Wilcox <mawilcox@microsoft.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>

Since my system use python3 as default, arch/ia64/scripts/unwcheck.py no
longer run.

This patch convert it to the python3 syntax.
I have ran it with python2/python3 while printing values of
start/end/rlen_sum which could be impacted by this change and I see no difference.

Fixes: 94a47083 ("scripts: change scripts to use system python instead of env")
Signed-off-by: Corentin Labbe <clabbe@baylibre.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>

Merge tag 'linux-kselftest-4.16-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest

Pull kselftest fixes from Shuah Khan:
 "A fix for regression in memory-hotplug install script that prevents
  the test from running on the target"

* tag 'linux-kselftest-4.16-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest:
  selftests: memory-hotplug: fix emit_tests regression

Pull networking fixes from David Miller:

 1) Use an appropriate TSQ pacing shift in mac80211, from Toke
    Høiland-Jørgensen.

 2) Just like ipv4's ip_route_me_harder(), we have to use skb_to_full_sk
    in ip6_route_me_harder, from Eric Dumazet.

 3) Fix several shutdown races and similar other problems in l2tp, from
    James Chapman.

 4) Handle missing XDP flush properly in tuntap, for real this time.
    From Jason Wang.

 5) Out-of-bounds access in powerpc ebpf tailcalls, from Daniel
    Borkmann.

 6) Fix phy_resume() locking, from Andrew Lunn.

 7) IFLA_MTU values are ignored on newlink for some tunnel types, fix
    from Xin Long.

 8) Revert F-RTO middle box workarounds, they only handle one dimension
    of the problem. From Yuchung Cheng.

 9) Fix socket refcounting in RDS, from Ka-Cheong Poon.

10) Don't allow ppp unit registration to an unregistered channel, from
    Guillaume Nault.

11) Various hv_netvsc fixes from Stephen Hemminger.

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (98 commits)
  hv_netvsc: propagate rx filters to VF
  hv_netvsc: filter multicast/broadcast
  hv_netvsc: defer queue selection to VF
  hv_netvsc: use napi_schedule_irqoff
  hv_netvsc: fix race in napi poll when rescheduling
  hv_netvsc: cancel subchannel setup before halting device
  hv_netvsc: fix error unwind handling if vmbus_open fails
  hv_netvsc: only wake transmit queue if link is up
  hv_netvsc: avoid retry on send during shutdown
  virtio-net: re enable XDP_REDIRECT for mergeable buffer
  ppp: prevent unregistered channels from connecting to PPP units
  tc-testing: skbmod: fix match value of ethertype
  mlxsw: spectrum_switchdev: Check success of FDB add operation
  net: make skb_gso_*_seglen functions private
  net: xfrm: use skb_gso_validate_network_len() to check gso sizes
  net: sched: tbf: handle GSO_BY_FRAGS case in enqueue
  net: rename skb_gso_validate_mtu -> skb_gso_validate_network_len
  rds: Incorrect reference counting in TCP socket creation
  net: ethtool: don't ignore return from driver get_fecparam method
  vrf: check forwarding on the original netdevice when generating ICMP dest unreachable
  ...

Antoine Tenart says:

====================
net: mvpp2: jumbo frames support

This series enable jumbo frames support in the Marvell PPv2 driver. The
first 2 patches rework the buffer management, then two patches prepare for
the final patch which adds the jumbo frames support into the driver.

This is based on top of net-next, and was tested on a mcbin.

Thanks!
Antoine

Since v1:
  - Improved the Tx FIFO initialization comment.
  - Improved the pool sanity check in mvpp2_bm_pool_use().
  - Fixed pool related comments.
  - Cosmetic fixes (used BIT() whenever possible).
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

This patch adds the support for jumbo frames in the Marvell PPv2 driver.
A third buffer pool is added with 10KB buffers, which is used if the MTU
is higher than 1518B for packets larger than 1518B. Please note only the
port 0 supports hardware checksum offload due to the Tx FIFO size
limitation.
Signed-off-by: Stefan Chulski <stefanc@marvell.com>
[Antoine: cosmetic cleanup, commit message]
Signed-off-by: Antoine Tenart <antoine.tenart@bootlin.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

This patch adds the NETIF_F_IPV6_CSUM to the driver's features to enable
UDP/TCP checksum over IPv6. No extra configuration of the engine is
needed on top of the IPv4 counterpart, which already is in the features
list (NETIF_F_IP_CSUM).
Signed-off-by: Antoine Tenart <antoine.tenart@bootlin.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

This patch sets the Tx FIFO data size on port 0 to 10kB. This prepares
the PPv2 driver for the Jumbo frame support addition as the hardware
will need big enough Tx FIFO buffers when dealing with frames going
through an interface with an MTU of 9000.
Signed-off-by: Yan Markman <ymarkman@marvell.com>
[Antoine: commit message, small reworks.]
Signed-off-by: Antoine Tenart <antoine.tenart@bootlin.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The buffer free routine is updated to release only given a number of
buffers, and the destroy routine now checks the actual number of buffers
in the (BPPI and BPPE) HW counters before draining the pools. This
change helps getting jumbo frames support.
Signed-off-by: Stefan Chulski <stefanc@marvell.com>
[Antoine: cosmetic cleanup, commit message]
Signed-off-by: Antoine Tenart <antoine.tenart@bootlin.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

This patch configures the buffer manager long pool for all ports part of
the same CP. Long pool separation between ports is redundant since there
are no performance improvement when different pools are used.
Signed-off-by: Stefan Chulski <stefanc@marvell.com>
[Antoine: cosmetic cleanup, commit message]
Signed-off-by: Antoine Tenart <antoine.tenart@bootlin.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

This fixes the following kernel-doc warning:

./include/net/dst.h:366: warning: Function parameter or member 'net' not described in 'skb_tunnel_rx'

Fixes: ea23192e ("tunnels: harmonize cleanup done on skb on rx path")
Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net>
Signed-off-by: David S. Miller <davem@davemloft.net>

The other dst_cache_{get,set}_ip{4,6} functions, and the doc comment for
dst_cache_set_ip6 use 'saddr' for their source address parameter. Rename
the parameter to increase consistency.

This fixes the following kernel-doc warnings:

./include/net/dst_cache.h:58: warning: Function parameter or member 'addr' not described in 'dst_cache_set_ip6'
./include/net/dst_cache.h:58: warning: Excess function parameter 'saddr' description in 'dst_cache_set_ip6'

Fixes: 911362c7 ("net: add dst_cache support")
Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net>
Signed-off-by: David S. Miller <davem@davemloft.net>

Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net>
Signed-off-by: David S. Miller <davem@davemloft.net>

Kirill Tkhai says:

====================
Converting pernet_operations (part #4)

this series continues to review and to convert pernet_operations
to make them possible to be executed in parallel for several
net namespaces in the same time. The patches touch mostly netfilter,
also there are small number of changes in other places.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

These pernet_operations register and unregister sysctl.
nf_conntrack_l4proto_gre4->init_net is simple memory
initializer. Also, exit method removes gre keymap_list,
which is per-net. This looks safe to be executed
in parallel with other pernet_operations.
Signed-off-by: Kirill Tkhai <ktkhai@virtuozzo.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

These pernet_operations register and unregister
two conntrack notifiers, and they seem to be safe
to be executed in parallel.

General/not related to async pernet_operations JFI:
ctnetlink_net_exit_batch() actions are grouped in batch,
and this could look like there is synchronize_rcu()
is forgotten. But there is synchronize_rcu() on module
exit patch (in ctnetlink_exit()), so this batch may
be reworked as simple .exit method.
Signed-off-by: Kirill Tkhai <ktkhai@virtuozzo.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

These pernet_operations register and unregister sysctl and /proc
entries. Exit batch method also waits till all per-net conntracks
are dead. Thus, they are safe to be marked as async.
Signed-off-by: Kirill Tkhai <ktkhai@virtuozzo.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

These pernet_operations initialize and destroy
net_generic(net, ip_set_net_id)-related data.
Since ip_set is under CONFIG_IP_SET, it's easy
to watch drivers, which depend on this config.
All of them are in net/netfilter/ipset directory,
except of net/netfilter/xt_set.c. There are no
more drivers, which use ip_set, and all of
the above don't register another pernet_operations.
Also, there are is no indirect users, as header
file include/linux/netfilter/ipset/ip_set.h does
not define indirect users by something like this:

	#ifdef CONFIG_IP_SET
	extern func(void);
	#else
	static inline func(void);
	#endif

So, there are no more pernet operations, dereferencing
net_generic(net, ip_set_net_id).

ip_set_net_ops are OK to be executed in parallel
for several net, so we mark them as async.
Signed-off-by: Kirill Tkhai <ktkhai@virtuozzo.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

These pernet_operations initialize and destroy
pernet net_generic(net, fou_net_id) list.
The rest of net_generic(net, fou_net_id) accesses
may happen after netlink message, and in-tree
pernet_operations do not send FOU_GENL_NAME messages.
So, these pernet_operations are safe to be marked
as async.
Signed-off-by: Kirill Tkhai <ktkhai@virtuozzo.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

These pernet_operations looks similar to dccp_v4_ops,
and they are also safe to be marked as async.
Signed-off-by: Kirill Tkhai <ktkhai@virtuozzo.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

These pernet_operations create and destroy net::dccp::v4_ctl_sk.
It looks like another pernet_operations don't want to send
dccp packets to dying or creating net. Batch method similar
to ipv4/ipv6 sockets and it has to be safe to be executed
in parallel with anything else. So, we mark them as async.
Signed-off-by: Kirill Tkhai <ktkhai@virtuozzo.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

These pernet_operations have a deal with cgw_list,
and the rest of accesses are made under rtnl_lock().
The only exception is cgw_dump_jobs(), which is
accessed under rcu_read_lock(). cgw_dump_jobs() is
called on netlink request, and it does not seem,
foreign pernet_operations want to send a net such
the messages. So, we mark them as async.
Signed-off-by: Kirill Tkhai <ktkhai@virtuozzo.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Init method just allocates memory for new cfg, and
assigns net_generic(net, caif_net_id). Despite there is
synchronize_rcu() on error path in cfcnfg_create(),
in real this function does not use global lists,
so it looks like this synchronize_rcu() is some legacy
inheritance. Exit method removes caif devices under
rtnl_lock().

There could be a problem, if someone from foreign net
pernet_operations dereference caif_net_id of this net.
It's dereferenced in get_cfcnfg() and caif_device_list().

get_cfcnfg() is used from netdevice notifiers, where
they are called under rtnl_lock(). The notifiers can't
be called from foreign nets pernet_operations. Also,
it's used from caif_disconnect_client() and from
caif_connect_client(). The both of the functions work
with caif socket, and there is the only possibility
to have a socket, when the net is dead. This may happen
only of the socket was created as kern using sk_alloc().
Grep by PF_CAIF shows we do not create kern caif sockets,
so get_cfcnfg() is safe.

caif_device_list() is used in netdevice notifiers and exit
method under rtnl lock. Also, from caif_get() used in
the netdev notifiers and in caif_flow_cb(). The last item
is skb destructor. Since there are no kernel caif sockets
nobody can send net a packet in parallel with init/exit,
so this is also safe.

So, these pernet_operations are safe to be async.
Signed-off-by: Kirill Tkhai <ktkhai@virtuozzo.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

These pernet_operations call xt_proto_init() and xt_proto_fini(),
which just register and unregister /proc entries.
They are safe to be marked as async.
Signed-off-by: Kirill Tkhai <ktkhai@virtuozzo.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

These pernet_operations use nf_log_set() and nf_log_unset()
in their methods:

	nf_log_bridge_net_ops
	nf_log_arp_net_ops
	nf_log_ipv4_net_ops
	nf_log_ipv6_net_ops
	nf_log_netdev_net_ops

Nobody can send such a packet to a net before it's became
registered, nobody can send a packet after all netdevices
are unregistered. So, these pernet_operations are able
to be marked as async.
Signed-off-by: Kirill Tkhai <ktkhai@virtuozzo.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

These pernet_operations use ebt_register_table() and
ebt_unregister_table() to act on the tables, which
are used as argument in ebt_do_table(), called from
ebtables hooks.

Since there are no net-related bridge packets in-flight,
when the init and exit methods are called, these
pernet_operations are safe to be executed in parallel
with any other.
Signed-off-by: Kirill Tkhai <ktkhai@virtuozzo.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

For tests using veth interfaces, the test infrastructure can create
the netdevs if they do not exist. Arguably this is a preferred approach
since the tests require p$N and p$(N+1) to be pairs.
Signed-off-by: David Ahern <dsahern@gmail.com>
Reviewed-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>