Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>

Returning errors directly even lets us remove the goto
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>

Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>

Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>

Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>

Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>

If we cut out the dprintk()s, then we can return error codes directly
and cut out the goto.
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>

Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>

Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>

This puts all the common code in a single place for the
walk_client_list() functions.
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>

Once again, we can remove the function and compare integer values
directly.
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>

If we cut out the dprintk()s, then we don't even need this to be a
separate function.
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>

Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>

Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>

Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>

Just remove the function and have the caller use nfs_release_request()
instead.
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>

Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>

We always call nfs_mark_client_ready() even if nfs_create_rpc_client()
returns an error, so we can rearrange nfs_init_client() to mark the
client ready from a single place.
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>

Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>

Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>

Let's cut out the goto and return any errors immedately
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>

Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>

Additionally, this change lets us cut out the goto by returning errors
immediately.
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>

Removing the dprintk() lets us simplify the function by returning status
codes directly, rather than using a goto.
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>

Removing the dprintk() lets us return the status value directly, rather
than jumping to a label if an error occurs.
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>

Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>

In addition to removing the dprintk(), this patch also initializes "res"
to the default return value instead of doing this through an else
condition.
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>

Removing the dprintk()s lets us simplify the function by removing the
else condition entirely and returning the status of
initiate_{file,bulk}_draining() directly.
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>

Flexfilelayout supports data servers which talk NFS v3 and v4.{0,1,2}.
However, this code path is disabled and v3 only servers are accepted.
This change removes this limitation.
Signed-off-by: Tigran Mkrtchyan <tigran.mkrtchyan@desy.de>
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>

NFS has some optimizations for readdir to choose between using READDIR or
READDIRPLUS based on workload, and which NFS operation to use is determined
by subsequent interactions with lookup, d_revalidate, and getattr.

Concurrent use of nfs_readdir() via ->iterate_shared() can cause those
optimizations to repeatedly invalidate the pagecache used to store
directory entries during readdir(), which causes some very bad performance
for directories with many entries (more than about 10000).

There's a couple ways to fix this in NFS, but no fix would be as simple as
going back to ->iterate() to serialize nfs_readdir(), and neither fix I
tested performed as well as going back to ->iterate().

The first required taking the directory's i_lock for each entry, with the
result of terrible contention.

The second way adds another flag to the nfs_inode, and so keeps the
optimizations working for large directories.  The difference from using
->iterate() here is that much more memory is consumed for a given workload
without any performance gain.

The workings of nfs_readdir() are such that concurrent users are serialized
within read_cache_page() waiting to retrieve pages of entries from the
server.  By serializing this work in iterate_dir() instead, contention for
cache pages is reduced.  Waiting processes can have an uncontended pass at
the entirety of the directory's pagecache once previous processes have
completed filling it.

v2 - Keep the bits needed for parallel lookup
Signed-off-by: Benjamin Coddington <bcodding@redhat.com>
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>

Pull ARM SoC fixes from Olof Johansson:
 "Again, a batch that's been sitting a couple of weeks, mostly because
  I anticipated a bit more material but it didn't show up -- which is
  good.

  These are all your garden variety fixes for ARM platforms.

  The most visible issue fixed here is probably the SMP reset issue on
  OMAP, the rest are minor stuff"

* tag 'armsoc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc:
  arm64: allwinner: a64: add pmu0 regs for USB PHY
  ARM: OMAP2+: omap_device: Sync omap_device and pm_runtime after probe defer
  reset: add exported __reset_control_get, return NULL if optional
  ARM: orion5x: only call into phylib when available
  ARM: omap2+: Revert omap-smp.c changes resetting CPU1 during boot
  ARM: dts: am335x-evmsk: adjust mmc2 param to allow suspend
  ARM: dts: ti: fix PCI bus dtc warnings
  ARM: dts: am335x-baltos: disable EEE for Atheros 8035 PHY
  ARM: dts: OMAP3: Fix MFG ID EEPROM
  ARM: sun8i: a33: add operating-points-v2 property to all nodes
  ARM: sun8i: a33: remove highest OPP to fix CPU crashes

Pull block fixes from Jens Axboe:
 "Four small fixes.

  Three of them fix the same error in NVMe, in loop, fc, and rdma
  respectively.  The last fix from Ming fixes a regression in this
  series, where our bvec gap logic was wrong and causes an oops on
  NVMe for certain conditions"

* 'for-linus' of git://git.kernel.dk/linux-block:
  block: fix bio_will_gap() for first bvec with offset
  nvme-fc: Fix sqsize wrong assignment based on ctrl MQES capability
  nvme-rdma: Fix sqsize wrong assignment based on ctrl MQES capability
  nvme-loop: Fix sqsize wrong assignment based on ctrl MQES capability

Merge tag 'omap-for-v4.11/fixes-rc6-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into fixes

Regression fix for omap interconnect code for deferred probe.
Without this fix we can get PM related warnings for devices that
use deferred probe. If necessary, this fix can wait for the
v4.12 merge window no problem.

* tag 'omap-for-v4.11/fixes-rc6-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
  ARM: OMAP2+: omap_device: Sync omap_device and pm_runtime after probe defer
  ARM: omap2+: Revert omap-smp.c changes resetting CPU1 during boot
  ARM: dts: am335x-evmsk: adjust mmc2 param to allow suspend
  ARM: dts: ti: fix PCI bus dtc warnings
  ARM: dts: am335x-baltos: disable EEE for Atheros 8035 PHY
  ARM: dts: OMAP3: Fix MFG ID EEPROM
Signed-off-by: Olof Johansson <olof@lixom.net>

Pull cgroup fix from Tejun Heo:
 "Unfortunately, the commit to fix the cgroup mount race in the previous
  pull request can lead to hangs.

  The original bug has been around for a while and isn't too likely to
  be triggered in usual use cases. Revert the commit for now"

* 'for-4.11-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup:
  Revert "cgroup: avoid attaching a cgroup root to two different superblocks"

Pull tty fix from Greg KH:
 "Here is a single tty core revert for a patch that was reported to
  cause problems.

  The original issue is one that we have lived with for decades, so
  trying to scramble to fix the fix in time for 4.11-final does not make
  sense due to the fragility of the tty ldisc layer. Just reverting it
  makes sense for now"

* tag 'tty-4.11-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty:
  Revert "tty: don't panic on OOM in tty_set_ldisc()"

Pull ftrace fix from Steven Rostedt:
 "While rewriting the function probe code, I stumbled over a long
  standing bug. This bug has been there sinc function tracing was added
  way back when. But my new development depends on this bug being fixed,
  and it should be fixed regardless as it causes ftrace to disable
  itself when triggered, and a reboot is required to enable it again.

  The bug is that the function probe does not disable itself properly if
  there's another probe of its type still enabled. For example:

     # cd /sys/kernel/debug/tracing
     # echo schedule:traceoff > set_ftrace_filter
     # echo do_IRQ:traceoff > set_ftrace_filter
     # echo \!do_IRQ:traceoff > /debug/tracing/set_ftrace_filter
     # echo do_IRQ:traceoff > set_ftrace_filter

  The above registers two traceoff probes (one for schedule and one for
  do_IRQ, and then removes do_IRQ.

  But since there still exists one for schedule, it is not done
  properly. When adding do_IRQ back, the breakage in the accounting is
  noticed by the ftrace self tests, and it causes a warning and disables
  ftrace"

* tag 'trace-v4.11-rc5-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace:
  ftrace: Fix removing of second function probe

This reverts commit bfb0b80d.

Andrei reports CRIU test hangs with the patch applied.  The bug fixed
by the patch isn't too likely to trigger in actual uses.  Revert the
patch for now.
Signed-off-by: Tejun Heo <tj@kernel.org>
Reported-by: Andrei Vagin <avagin@virtuozzo.com>
Link: http://lkml.kernel.org/r/20170414232737.GC20350@outlook.office365.com

Pull nvdimm fixes from Dan Williams:
 "A small crop of lockdep, sleeping while atomic, and other fixes /
  band-aids in advance of the full-blown reworks targeting the next
  merge window. The largest change here is "libnvdimm: fix blk free
  space accounting" which deletes a pile of buggy code that better
  testing would have caught before merging. The next change that is
  borderline too big for a late rc is switching the device-dax locking
  from rcu to srcu, I couldn't think of a smaller way to make that fix.

  The __copy_user_nocache fix will have a full replacement in 4.12 to
  move those pmem special case considerations into the pmem driver. The
  "libnvdimm: band aid btt vs clear poison locking" commit admits that
  our error clearing support for btt went in broken, so we just disable
  it in 4.11 and -stable. A replacement / full fix is in the pipeline
  for 4.12

  Some of these would have been caught earlier had DEBUG_ATOMIC_SLEEP
  been enabled on my development station. I wonder if we should have:

      config DEBUG_ATOMIC_SLEEP
        default PROVE_LOCKING

  ...since I mistakenly thought I got both with PROVE_LOCKING=y.

  These have received a build success notification from the 0day robot,
  and some have appeared in a -next release with no reported issues"

* 'libnvdimm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm:
  x86, pmem: fix broken __copy_user_nocache cache-bypass assumptions
  device-dax: switch to srcu, fix rcu_read_lock() vs pte allocation
  libnvdimm: band aid btt vs clear poison locking
  libnvdimm: fix reconfig_mutex, mmap_sem, and jbd2_handle lockdep splat
  libnvdimm: fix blk free space accounting
  acpi, nfit, libnvdimm: fix interleave set cookie calculation (64-bit comparison)

Pull SCSI fixes from James Bottomley:
 "This is seven small fixes which are all for user visible issues that
  fortunately only occur in rare circumstances.

  The most serious is the sr one in which QEMU can cause us to read
  beyond the end of a buffer (I don't think it's exploitable, but just
  in case).

  The next is the sd capacity fix which means all non 512 byte sector
  drives greater than 2TB fail to be correctly sized.

  The rest are either in new drivers (qedf) or on error legs"

* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
  scsi: ipr: do not set DID_PASSTHROUGH on CHECK CONDITION
  scsi: aacraid: fix PCI error recovery path
  scsi: sd: Fix capacity calculation with 32-bit sector_t
  scsi: qla2xxx: Add fix to read correct register value for ISP82xx.
  scsi: qedf: Fix crash due to unsolicited FIP VLAN response.
  scsi: sr: Sanity check returned mode data
  scsi: sd: Consider max_xfer_blocks if opt_xfer_blocks is unusable