- 17 Jan, 2010 5 commits
-
-
Mark Brown authored
This has been superceeded by Sascha's new driver but was not removed in the patch series due to cutdowns for review. Signed-off-by:Mark Brown <broonie@opensource.wolfsonmicro.com>
-
Mark Brown authored
The clocks for the SSI block need handling before this can work. Signed-off-by: -
Mark Brown authored
While dynamically allocated DAIs are the way forward the core doesn't yet support anything except matching with a pointer to the actual DAI so convert to doing that so that machine drivers don't have to jump through hoops to register themselves. Signed-off-by:
Javier Martin <javier.martin@vista-silicon.com>
-
Mark Brown authored
Don't unconditionally include the i.MX2x DMA driver, the arch/arm functions it uses aren't available for i.MX3x. Signed-off-by:
-
Sascha Hauer authored
The old driver has the number of SSI units in the system hardcoded, does not make use of the device model and works only on i.MX21/27. This driver replaces it. It works in DMA mode on i.MX21/27 and using an FIQ handler on other systems. It also supports AC97 mode of the SSI units. Signed-off-by:
Sascha Hauer <s.hauer@pengutronix.de> Acked-by:
Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by:
-
- 04 Jan, 2010 6 commits
-
-
Mark Brown authored
Signed-off-by:
-
Mark Brown authored
Signed-off-by:
-
Mark Brown authored
Signed-off-by:
-
Mark Brown authored
Signed-off-by:
-
Mark Brown authored
Signed-off-by:
-
Ilkka Koskinen authored
Signed-off-by:
Ilkka Koskinen <ilkka.koskinen@nokia.com> Acked-by:
Peter Ujfalusi <peter.ujfalusi@nokia.com> Acked-by:
-
- 31 Dec, 2009 8 commits
-
-
Mark Brown authored
Signed-off-by:
-
Mark Brown authored
Better integration of the core with the device model means that we now no longer get the ASoC suspend and resume callbacks without the card having been set up. Signed-off-by:
-
Peter Ujfalusi authored
The currently available FIFO modes (mode1 and mode7) require master mode from the codec. Do not allow the slave configuration when the FIFO is in use. Signed-off-by:
-
Peter Ujfalusi authored
Mode 7 of tlv320dac33 operates in the following way: The codec is in master mode. Host configures upper and lower thresholds in tlv320dac33 During playback the codec will clock in the data until the upper threshold is reached in FIFO. At this point the codec stops the colocks on the serial bus. When the FIFO fill is reaching the lower threshold limit the codec will enable the clocks on the serial bus, and clocks in data till the upper threshold is reached. In this mode, we can also request interrupts for threshold events (upper, lower and alarm), which could be used for power management. At this point the interrupts are not enabled for this mode, but it can be taken into use in the future, when the surrounding code makes it possible to use it. Signed-off-by:
Liam Girdwood <lrg@slimlogic.oc.uk> Signed-off-by:
-
Peter Ujfalusi authored
Use switch instead of if statements to configure FIFO bypass and mode1. With this change adding new FIFO mode is going to be easier, and cleaner. Signed-off-by:
-
Peter Ujfalusi authored
Ensure that the code is going to be readable, when new FIFO modes are introduced later. Move the prefill and playback state handling to inlined functions. Signed-off-by:
-
Peter Ujfalusi authored
In order to have support for more FIFO modes supported by tlv320dac33, the switch for enabling/disabling the FIFO use has to be replaced with an enum. Signed-off-by:
-
Barry Song authored
Signed-off-by:
Barry Song <21cnbao@gmail.com> Acked-by:
-
- 30 Dec, 2009 6 commits
-
-
Kuninori Morimoto authored
Signed-off-by:
Kuninori Morimoto <morimoto.kuninori@renesas.com> Acked-by:
-
Kuninori Morimoto authored
Signed-off-by:
-
Kuninori Morimoto authored
Signed-off-by:
-
Barry Song authored
PM architecture of ad1938 is simple, we don't need a bundle of functions like ad1938_pll_powerctrl, ad1938_set_bias_level for only PLL. A dapm supply will handle on/off of PLL. Since soc-core can poweron/off PLL on-demand, we don't need to poweron/off PLL in suspend/resume entries too. Signed-off-by:
-
Barry Song authored
Signed-off-by:
-
Barry Song authored
Tests show frequent suspend/resume(frequent poweroff/on ad1836 internal components) maybe make ad1836 clock mode wrong sometimes after wakeup. This patch reset/restore ad1836 clock mode while executing PM, then ad1836 can always resume to right clock status. Signed-off-by:
-
- 18 Dec, 2009 5 commits
-
-
Mark Brown authored
Avoids skipping over the read for disable cases. Signed-off-by: -
Mark Brown authored
-
Mark Brown authored
Signed-off-by:
-
Mark Brown authored
The WM8955 is a low power, high quality stereo DAC with integrated headphone and loudspeaker amplifiers, designed to reduce external component requirements in portable digital audio applications. This is an initial driver implementing support for the majority of the functionality in the device, currently OUT3 is not supported. Signed-off-by:
-
Guennadi Liakhovetski authored
The wm8974 datasheet defines BUFIOEN as bit 2. Signed-off-by:
Guennadi Liakhovetski <g.liakhovetski@gmx.de> Acked-by:
-
- 16 Dec, 2009 10 commits
-
-
Mark Brown authored
DAC_VOICE_EN was not defined - looks to have been overly enthusiastically deleted from a previous revision of the patch, pull the value from v1. Signed-off-by: -
Peter Meerwald authored
fix precision of PLL computation for TLV320AIC3x SoC driver, test results are at http://pmeerw.net/clkSigned-off-by:
Peter Meerwald <pmeerw@pmeerw.net> Acked-by:
Vladimir Barinov <vova.barinov@gmail.com> Acked-by:
-
Mark Brown authored
Signed-off-by:
-
Kuninori Morimoto authored
Signed-off-by:
-
Kuninori Morimoto authored
This original driver was created by Dialog Semiconductor, and cleanuped by Kuninori Morimoto. Special thanks to David Chen. This became very simple ASoC codec driver, and it is tested by EcoVec24 board. Signed-off-by:
David Chen <Dajun.chen@diasemi.com> Signed-off-by:
-
Ilkka Koskinen authored
Take the regulator framework in use for managing the power sources Signed-off-by:
Eduardo Valentin <eduardo.valentin@nokia.com> Acked-by:
-
Jassi Brar authored
The driver can be 'generalized' a bit by not hardcoding '2'(the number of I2Sv3 controllers that the driver can handle) at many places, instead we define a macro for it. That makes it easier to increase number of controllers by changing the parameter at just one place, this will be useful when there is support for newer SoCs, which have the same controller, only more in number. Signed-off-by:
Jassi Brar <jassi.brar@samsung.com> Acked-by:
-
Jassi Brar authored
Removed redundant header includes which make no difference to compilation. Signed-off-by:
-
Mark Brown authored
Signed-off-by:
-
Mark Brown authored
In preparation for multiple device support. Signed-off-by:
-
