- 27 Dec, 2011 32 commits
-
-
Takuya Yoshikawa authored
CMPXCHG: 0F B0, 0F B1 Signed-off-by:
Takuya Yoshikawa <yoshikawa.takuya@oss.ntt.co.jp> Signed-off-by:
Marcelo Tosatti <mtosatti@redhat.com>
-
Takuya Yoshikawa authored
WRMSR: 0F 30 RDMSR: 0F 32 Signed-off-by:
-
Takuya Yoshikawa authored
MOV: 0F 22 (move to control registers) MOV: 0F 23 (move to debug registers) Signed-off-by:
-
Takuya Yoshikawa authored
CALL: E8 Signed-off-by:
-
Takuya Yoshikawa authored
BT : 0F A3 BTS: 0F AB BTR: 0F B3 BTC: 0F BB Group 8: 0F BA Signed-off-by:
-
Takuya Yoshikawa authored
IN : E4, E5, EC, ED OUT: E6, E7, EE, EF Signed-off-by:
-
Gleb Natapov authored
vmx_load_host_state() does not handle msrs switching (except MSR_KERNEL_GS_BASE) since commit 26bb0981. Remove call to it where it is no longer make sense. Signed-off-by:
Gleb Natapov <gleb@redhat.com> Signed-off-by:
Avi Kivity <avi@redhat.com>
-
Takuya Yoshikawa authored
Currently, write protecting a slot needs to walk all the shadow pages and checks ones which have a pte mapping a page in it. The walk is overly heavy when dirty pages in that slot are not so many and checking the shadow pages would result in unwanted cache pollution. To mitigate this problem, we use rmap_write_protect() and check only the sptes which can be reached from gfns marked in the dirty bitmap when the number of dirty pages are less than that of shadow pages. This criterion is reasonable in its meaning and worked well in our test: write protection became some times faster than before when the ratio of dirty pages are low and was not worse even when the ratio was near the criterion. Note that the locking for this write protection becomes fine grained. The reason why this is safe is descripted in the comments. Signed-off-by:
-
Takuya Yoshikawa authored
Needed for the next patch which uses this number to decide how to write protect a slot. Signed-off-by:
-
Takuya Yoshikawa authored
rmap_write_protect() calls gfn_to_rmap() for each level with gfn fixed. This results in calling gfn_to_memslot() repeatedly with that gfn. This patch introduces __gfn_to_rmap() which takes the slot as an argument to avoid this. This is also needed for the following dirty logging optimization. Signed-off-by:
-
Takuya Yoshikawa authored
Remove redundant checks and use is_large_pte() macro. Signed-off-by:
-
Thomas Meyer authored
Use kmemdup rather than duplicating its implementation The semantic patch that makes this change is available in scripts/coccinelle/api/memdup.cocci. More information about semantic patching is available at http://coccinelle.lip6.fr/Signed-off-by:
Thomas Meyer <thomas@m3y3r.de> Signed-off-by:
-
Chris Wright authored
The host side pv mmu support has been marked for feature removal in January 2011. It's not in use, is slower than shadow or hardware assisted paging, and a maintenance burden. It's November 2011, time to remove it. Signed-off-by:
Chris Wright <chrisw@redhat.com> Signed-off-by:
-
Chris Wright authored
This has not been used for some years now. It's time to remove it. Signed-off-by:
-
Dan Carpenter authored
My testing version of Smatch complains that addr and len come from the user and they can wrap. The path is: -> kvm_vm_ioctl() -> kvm_vm_ioctl_unregister_coalesced_mmio() -> coalesced_mmio_in_range() I don't know what the implications are of wrapping here, but we may as well fix it, if only to silence the warning. Signed-off-by:Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by:
-
Jan Kiszka authored
The vcpu reference of a kvm_timer can't become NULL while the timer is valid, so drop this redundant test. This also makes it pointless to carry a separate __kvm_timer_fn, fold it into kvm_timer_fn. Signed-off-by:
Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by:
-
Eric B Munson authored
The kvm_host struct can include an mmu_notifier struct but mmu_notifier.h is not included directly. Signed-off-by:
Eric B Munson <emunson@mgebm.net> Signed-off-by:
-
Xiao Guangrong authored
Detecting write-flooding does not work well, when we handle page written, if the last speculative spte is not accessed, we treat the page is write-flooding, however, we can speculative spte on many path, such as pte prefetch, page synced, that means the last speculative spte may be not point to the written page and the written page can be accessed via other sptes, so depends on the Accessed bit of the last speculative spte is not enough Instead of detected page accessed, we can detect whether the spte is accessed after it is written, if the spte is not accessed but it is written frequently, we treat is not a page table or it not used for a long time Signed-off-by:
Xiao Guangrong <xiaoguangrong@cn.fujitsu.com> Signed-off-by:
-
Xiao Guangrong authored
Sometimes, we only modify the last one byte of a pte to update status bit, for example, clear_bit is used to clear r/w bit in linux kernel and 'andb' instruction is used in this function, in this case, kvm_mmu_pte_write will treat it as misaligned access, and the shadow page table is zapped Signed-off-by:
-
Xiao Guangrong authored
kvm_mmu_pte_write is too long, we split it for better readable Signed-off-by:
-
Xiao Guangrong authored
In kvm_mmu_pte_write, we do not need to alloc shadow page, so calling kvm_mmu_free_some_pages is really unnecessary Signed-off-by:
-
Xiao Guangrong authored
Fast prefetch spte for the unsync shadow page on invlpg path Signed-off-by:
-
Xiao Guangrong authored
Directly Use mmu_page_zap_pte to zap spte in FNAME(invlpg), also remove the same code between FNAME(invlpg) and FNAME(sync_page) Signed-off-by:
-
Xiao Guangrong authored
In current code, the accessed bit is always set when page fault occurred, do not need to set it on pte write path Signed-off-by:
-
Xiao Guangrong authored
Remove the same code between emulator_pio_in_emulated and emulator_pio_out_emulated Signed-off-by:
-
Xiao Guangrong authored
If the emulation is caused by #PF and it is non-page_table writing instruction, it means the VM-EXIT is caused by shadow page protected, we can zap the shadow page and retry this instruction directly The idea is from Avi Signed-off-by:
-
Xiao Guangrong authored
The idea is from Avi: | tag instructions that are typically used to modify the page tables, and | drop shadow if any other instruction is used. | The list would include, I'd guess, and, or, bts, btc, mov, xchg, cmpxchg, | and cmpxchg8b. This patch is used to tag the instructions and in the later path, shadow page is dropped if it is written by other instructions Signed-off-by:
-
Xiao Guangrong authored
kvm_mmu_pte_write is unsafe since we need to alloc pte_list_desc in the function when spte is prefetched, unfortunately, we can not know how many spte need to be prefetched on this path, that means we can use out of the free pte_list_desc object in the cache, and BUG_ON() is triggered, also some path does not fill the cache, such as INS instruction emulated that does not trigger page fault Signed-off-by:
-
Nadav Har'El authored
When L0 wishes to inject an interrupt while L2 is running, it emulates an exit to L1 with EXIT_REASON_EXTERNAL_INTERRUPT. This was explained in the original nVMX patch 23, titled "Correct handling of interrupt injection". Unfortunately, it is possible (though rare) that at this point there is valid idt_vectoring_info in vmcs02. For example, L1 injected some interrupt to L2, and when L2 tried to run this interrupt's handler, it got a page fault - so it returns the original interrupt vector in idt_vectoring_info. The problem is that if this is the case, we cannot exit to L1 with EXTERNAL_INTERRUPT like we wished to, because the VMX spec guarantees that idt_vectoring_info and exit_reason_external_interrupt can never happen together. This is not just specified in the spec - a KVM L1 actually prints a kernel warning "unexpected, valid vectoring info" if we violate this guarantee, and some users noticed these warnings in L1's logs. In order to better emulate a processor, which would never return the external interrupt and the idt-vectoring-info together, we need to separate the two injection steps: First, complete L1's injection into L2 (i.e., enter L2, injecting to it the idt-vectoring-info); Second, after entry into L2 succeeds and it exits back to L0, exit to L1 with the EXIT_REASON_EXTERNAL_INTERRUPT. Most of this is already in the code - the only change we need is to remain in L2 (and not exit to L1) in this case. Note that the previous patch ensures (by using KVM_REQ_IMMEDIATE_EXIT) that although we do enter L2 first, it will exit immediately after processing its injection, allowing us to promptly inject to L1. Note how we test vmcs12->idt_vectoring_info_field; This isn't really the vmcs12 value (we haven't exited to L1 yet, so vmcs12 hasn't been updated), but rather the place we save, at the end of vmx_vcpu_run, the vmcs02 value of this field. This was explained in patch 25 ("Correct handling of idt vectoring info") of the original nVMX patch series. Thanks to Dave Allan and to Federico Simoncelli for reporting this bug, to Abel Gordon for helping me figure out the solution, and to Avi Kivity for helping to improve it. Signed-off-by:Nadav Har'El <nyh@il.ibm.com> Signed-off-by:
-
Nadav Har'El authored
This patch adds a new vcpu->requests bit, KVM_REQ_IMMEDIATE_EXIT. This bit requests that when next entering the guest, we should run it only for as little as possible, and exit again. We use this new option in nested VMX: When L1 launches L2, but L0 wishes L1 to continue running so it can inject an event to it, we unfortunately cannot just pretend to have run L2 for a little while - We must really launch L2, otherwise certain one-off vmcs12 parameters (namely, L1 injection into L2) will be lost. So the existing code runs L2 in this case. But L2 could potentially run for a long time until it exits, and the injection into L1 will be delayed. The new KVM_REQ_IMMEDIATE_EXIT allows us to request that L2 will be entered, as necessary, but will exit as soon as possible after entry. Our implementation of this request uses smp_send_reschedule() to send a self-IPI, with interrupts disabled. The interrupts remain disabled until the guest is entered, and then, after the entry is complete (often including processing an injection and jumping to the relevant handler), the physical interrupt is noticed and causes an exit. On recent Intel processors, we could have achieved the same goal by using MTF instead of a self-IPI. Another technique worth considering in the future is to use VM_EXIT_ACK_INTR_ON_EXIT and a highest-priority vector IPI - to slightly improve performance by avoiding the useless interrupt handler which ends up being called when smp_send_reschedule() is used. Signed-off-by:
-
Keith Packard authored
RC6 fails again. > I found my system freeze mostly during starting up X and KDE. Sometimes it > works for some minutes, sometimes it freezes immediatly. When the freeze > happens, everything is dead (even the reset button does not work, I need to > power cycle). > I disabled RC6, and my system runs wonderfully. > The system is a Z68 Pro board with Sandybridge i5-2500K processor, 8 > GB of RAM and UEFI firmware. Reported-by:
Kai Krakow <hurikhan77@gmail.com> Signed-off-by:
Keith Packard <keithp@keithp.com> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Keith Packard authored
Semaphores still cause problems on some machines: > From Udo Steinberg: > > With Linux-3.2-rc6 I'm frequently seeing GPU hangs when large amounts of > text scroll in an xterm, such as when extracting a tar archive. Such as this > one (note the timestamps): > > I can reproduce it fairly easily with something > as simple as: > > while true; do dmesg; done This patch turns them off on SNB while leaving them on for IVB. Reported-by:
Udo Steinberg <udo@hypervisor.org> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: Eugeni Dodonov <eugeni@dodonov.net> Signed-off-by:
-
- 26 Dec, 2011 8 commits
-
-
git://git.kernel.org/pub/scm/virt/kvm/kvmLinus Torvalds authored
* 'kvm-updates/3.2' of git://git.kernel.org/pub/scm/virt/kvm/kvm: KVM: PPC: e500: include linux/export.h KVM: PPC: fix kvmppc_start_thread() for CONFIG_SMP=N KVM: PPC: protect use of kvmppc_h_pr KVM: PPC: move compute_tlbie_rb to book3s_64 common header KVM: Don't automatically expose the TSC deadline timer in cpuid KVM: Device assignment permission checks KVM: Remove ability to assign a device without iommu support KVM: x86: Prevent starting PIT timers in the absence of irqchip support
-
git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394Linus Torvalds authored
post 3.2-rc7 pull request * tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394: MAINTAINERS: firewire git URL update
-
Linus Torvalds authored
Bruce Fields notes that commit 778fc546 ("locks: fix tracking of inprogress lease breaks") introduced a possible error pointer dereference on failure to allocate memory. locks_conflict() will dereference the passed-in new lease lock structure that may be an error pointer. This means an open (without O_NONBLOCK set) on a file with a lease applied (generally only done when Samba or nfsd (with v4) is running) could crash if a kmalloc() fails. So instead of playing games with IS_ERROR() all over the place, just check the allocation failure early. That makes the code more straightforward, and avoids this possible bad pointer dereference. Based-on-patch-by:
J. Bruce Fields <bfields@redhat.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by:
-
Scott Wood authored
This is required for THIS_MODULE. We recently stopped acquiring it via some other header. Signed-off-by:
Scott Wood <scottwood@freescale.com> Signed-off-by:
Alexander Graf <agraf@suse.de>
-
Michael Neuling authored
Currently kvmppc_start_thread() tries to wake other SMT threads via xics_wake_cpu(). Unfortunately xics_wake_cpu only exists when CONFIG_SMP=Y so when compiling with CONFIG_SMP=N we get: arch/powerpc/kvm/built-in.o: In function `.kvmppc_start_thread': book3s_hv.c:(.text+0xa1e0): undefined reference to `.xics_wake_cpu' The following should be fine since kvmppc_start_thread() shouldn't called to start non-zero threads when SMP=N since threads_per_core=1. Signed-off-by:
Michael Neuling <mikey@neuling.org> Signed-off-by:
-
Andreas Schwab authored
kvmppc_h_pr is only available if CONFIG_KVM_BOOK3S_64_PR. Signed-off-by:
Andreas Schwab <schwab@linux-m68k.org> Signed-off-by:
-
Andreas Schwab authored
compute_tlbie_rb is only used on ppc64 and cannot be compiled on ppc32. Signed-off-by:
-
Jan Kiszka authored
Unlike all of the other cpuid bits, the TSC deadline timer bit is set unconditionally, regardless of what userspace wants. This is broken in several ways: - if userspace doesn't use KVM_CREATE_IRQCHIP, and doesn't emulate the TSC deadline timer feature, a guest that uses the feature will break - live migration to older host kernels that don't support the TSC deadline timer will cause the feature to be pulled from under the guest's feet; breaking it - guests that are broken wrt the feature will fail. Fix by not enabling the feature automatically; instead report it to userspace. Because the feature depends on KVM_CREATE_IRQCHIP, which we cannot guarantee will be called, we expose it via a KVM_CAP_TSC_DEADLINE_TIMER and not KVM_GET_SUPPORTED_CPUID. Fixes the Illumos guest kernel, which uses the TSC deadline timer feature. [avi: add the KVM_CAP + documentation] Reported-by:
Alexey Zaytsev <alexey.zaytsev@gmail.com> Tested-by:
-
