- 12 Jun, 2013 40 commits
-
-
Arend van Spriel authored
The BDC header contains PropTx TLV signals that are useful to capture for debugging. This event captures the header and tlv's in binary form. This can be post-processed using trace-cmd plugin. Reviewed-by:
Hante Meuleman <meuleman@broadcom.com> Reviewed-by:
Franky (Zhenhui) Lin <frankyl@broadcom.com> Signed-off-by:
Arend van Spriel <arend@broadcom.com> Signed-off-by:
John W. Linville <linville@tuxdriver.com>
-
Arend van Spriel authored
The statistic counter send_pkts was wrongly counted conditionally. Correcting the mistake. Reviewed-by:
Pieter-Paul Giesberts <pieterpg@broadcom.com> Signed-off-by:
-
Hante Meuleman authored
Reviewed-by:
-
Hante Meuleman authored
Reviewed-by:
-
Hante Meuleman authored
Currently suppressed packets get enque-ed with header which then gets pulled before transmit. It is more logical and clean to pull the header on return and push it unconditionally on xmit. Reviewed-by:
-
Hante Meuleman authored
During P2P testing it turned out that the firmware sents multiple multiple creditmap event messages. Only the first message from the firmware should be processed. Otherwise the firmware-signalled flow control can run haywire when it has packets outstanding in firmware. Reviewed-by:
-
Hante Meuleman authored
The destination entries for firmware-signalled flow control have the interface id stored. This needs to be translated to bsscfg index when looking up the ifp object for the interface. Reviewed-by:
-
Hante Meuleman authored
In case of TDLS find the correct MAC descriptor for fw signalling data. In case of TDLS each destination gets its own entry. This was not handled correctly for P2P client. Reviewed-by:
-
Hante Meuleman authored
When credit borrowing is active the BE credits have been depleted, however the worker should still be scheduled. In case of credit borrowing correct credit map to make sure worker remains active. Reviewed-by:
-
Hante Meuleman authored
Store gen bit on suppressed packet per entry and use latest stored version for each packet which gets transmitted to fw. Reviewed-by:
-
Hante Meuleman authored
Currently on a bus flow control both fws is informed and netif queue gets closed. In case of fw signalling enabled, let the flow control be handled by fw signalling only. Reviewed-by:
-
Arend van Spriel authored
The debug logging in firmware-signalling code was rather extensive and for a large part in the data path. This patch removes large part or the level is changed to DATA level. Reviewed-by:
-
Arend van Spriel authored
Firmware can request the driver for transmit packets using two different signals. Only for one signal a flag was set in the sk_buff control buffer. This patch adds explicit flag for the other signal as well. Reviewed-by:
-
Arend van Spriel authored
Reworked brcmf_skb_pick_up_credit() so it can be used for both fcmode flavours in the same way. Reviewed-by:
-
Hante Meuleman authored
On bus flow control (no more host bus resources to send packets to device) the netif flow control was toggled, however credit management should also take this status into account. Since there are multiple sources handling this flow control necessary spinlocks were added to protect flow control related data/states. Reviewed-by:
-
Arend van Spriel authored
The brcmf_skbuff_cb structure contain if_flags and htod fields. Both have a bitfield defined to hold the fifo number. With a small code change we get rid of the fifo bitfield in if_flags. Reviewed-by:
-
Arend van Spriel authored
The firmware-signal API specification defines length for the different tlv. During testing on different devices it turned out not all firmware used the tlv length according specification. Therefore the length check is made less strict with this patch. Reviewed-by:
-
Gabor Juhos authored
It is exactly the same like the generic rt2800usb_ops. Remove the duplicate and use the generic ops for all devices. Signed-off-by:
Gabor Juhos <juhosg@openwrt.org> Acked-by:
Gertjan van Wingerde <gwingerde@gmail.com> Signed-off-by:
-
Gabor Juhos authored
The extra_tx_headroom field of struct rt2x00_ops indicates the extra TX headroom size required for a given device. This data is redundant, the value can be computed from the desc_size and winfo_size fields of the TX queues. Move the extra_tx_headroom field to struct rt2x00_dev, compute its value in the probe routine and use the cached value in the rest of the code. Signed-off-by:
Stanislaw Gruszka <sgruszka@redhat.com> Acked-by:
-
Luis R. Rodriguez authored
This adds VHT80 support for the QCA world regulatory domains. Cc: kvalo@qca.qualcomm.com Signed-off-by:
Luis R. Rodriguez <mcgrof@do-not-panic.com> Signed-off-by:
-
Wei Yongjun authored
Fix to return a negative error code in the il3945_hw_set_hw_params() error handling case instead of 0, as done elsewhere in this function. Signed-off-by:
Wei Yongjun <yongjun_wei@trendmicro.com.cn> Acked-by:
-
Avinash Patil authored
This patch disables tx_amsdu support in mwifiex by default. tx_amdsu support can be enabled via module parameter at load time. Signed-off-by:
Avinash Patil <patila@marvell.com> Signed-off-by:
Bing Zhao <bzhao@marvell.com> Signed-off-by:
-
Amitkumar Karwar authored
PATCH "mwifiex: scan delay timer cleanup in unload path" adds code to cancel scan delay timer in unload path. It causes a regression for USB interface. USB8797 card gets enumerated twice. First enumeration is for firmware download and second enumeration expects firmware initialization. It was observed that we are trying del_timer_sync() without setting up the timer when remove handler is called after first enumeration. This patch moves setup_timer() call to appropriate place so that timer is setup for both the enumerations. Signed-off-by:
Amitkumar Karwar <akarwar@marvell.com> Signed-off-by:
-
Gabor Juhos authored
If the queue_init callback is implemented by a driver it gets used instead of the data_queue_desc based initialization. The queue_init callback is implemented for each drivers now, so the old initialization method is not used anymore. Remove the unused data_queue_desc structure and all of the related code. Signed-off-by:
-
Gabor Juhos authored
The generic rt2x00 code has been changed to allow the drivers toimplement dynamic data_queue initialization. Remove the static data queue descriptor structures and implement the queue_init callback instead. Compile tested only. Signed-off-by:
-
Gabor Juhos authored
The generic rt2x00 code has been changed to allow the drivers toimplement dynamic data_queue initialization. Remove the static data queue descriptor structures and implement the queue_init callback instead. Signed-off-by:
Jakub Kicinski <kubakici@wp.pl> Acked-by:
-
Gabor Juhos authored
The generic rt2x00 code has been changed to allow the drivers toimplement dynamic data_queue initialization. Remove the static data queue descriptor structures and implement the queue_init callback instead. Compile tested only. Signed-off-by:
-
Gabor Juhos authored
The generic rt2x00 code has been changed to allow the drivers toimplement dynamic data_queue initialization. Remove the static data queue descriptor structures and implement the queue_init callback instead. Compile tested only. Signed-off-by:
-
Gabor Juhos authored
The generic rt2x00 code has been changed to allow the drivers toimplement dynamic data_queue initialization. Remove the static data queue descriptor structures and implement the queue_init callback instead. Signed-off-by:
-
Gabor Juhos authored
The generic rt2x00 code has been changed to allow the drivers toimplement dynamic data_queue initialization. Remove the static data queue descriptor structures and implement the queue_init callback instead. Signed-off-by:
-
Gabor Juhos authored
The generic rt2x00 code has been changed to allow the drivers toimplement dynamic data_queue initialization. Remove the static data queue descriptor structures and implement the queue_init callback instead. The actual chipset is already known when the callback is used. This allows us to use a single callback for all supported devices. Signed-off-by:
-
Gabor Juhos authored
The driver uses static data structures for initializing specific fields of a given data queue. These static queue data descriptor structures are containing values which related to a given chipset. Even though the values are chip specific, the actual selection of the used structure is based on device specific vendor/product identifiers. This approach works, but it is not always reliable. Sometimes the vendor and/or device IDs of the PCI and USB devices contains improper values which makes it impossible to select the correct structure for such devices. The patch adds a new callback to tr2x00_ops which is called after the chipset detection is finished. This allows the drivers to do dynamic initialization of the data_queue structure for a given queue based on the actual chipset. After each driver implements the queue_init callback, the data_queue_desc structure will be removed. Signed-off-by:
-
Gabor Juhos authored
Use the queue->limit value instead of the qdesc->entry_num to compute the threshold. The two source values are the same and the data queue descriptor structure will be removed by a later patch. Also separate the computation from the rest of the init code to make further changes easier. Signed-off-by:
-
Gabor Juhos authored
The beacon data queue is initialized already, so fetch the number of the queue entries from that instead of using the entry_num field of the data queue descriptor. The two values are the same, and the use of the rt2x00dev->bcn->limit value allows us to get rid of a superfluous pointer dereference. Signed-off-by:
-
Gabor Juhos authored
The qdesc parameter is not used anymore, so remove that. Signed-off-by:
-
Gabor Juhos authored
Add a new field into struct data_queue and store the size of the per-queue_entry private data in that. Additionally, use the new field in the rt2x00queue_alloc_entries function to compute the size of the queue entries for a given queue. The patch does not change the current behaviour but makes it possible to remove the queue_desc parameter of the rt2x00queue_alloc_entries function. That will be done by a subsequent patch. Signed-off-by:
-
Sujith Manoharan authored
Signed-off-by:
Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by:
-
Sujith Manoharan authored
The phy error mask registers are programmed already in ath9k_ani_restart(), so there is no need to set them in ath9k_ani_reset(). Signed-off-by:
-
Sujith Manoharan authored
The commit, "ath9k_hw: improve ANI processing and rx desensitizing parameters" removed code setting various phy registers holding threshold values. This is likely required for OFDM weak signal detection to function correctly, so add them, but skip AR9462 and AR9565. Signed-off-by:
-
Sujith Manoharan authored
The commit, "ath9k_hw: improve ANI processing and rx desensitizing parameters" modified the immunity level tables for both CCK and OFDM. Fix them so that the tables are in sync with the internal driver/codebase. Signed-off-by:
-
