- 17 Oct, 2008 40 commits
-
-
Tobias Lorenz authored
This patch changes the handling of unsupported base controls. In the former version, specific unsupported base controls were listed in the queryctrl table and were flagged as disabled controls. This was done for all base controls used by the applications. The patch now removes the specific base controls and instead lets queryctrl automatically return unsupported base controls flagged as disabled. Signed-off-by:
Tobias Lorenz <tobias.lorenz@gmx.net> Signed-off-by:
Mauro Carvalho Chehab <mchehab@redhat.com>
-
Tobias Lorenz authored
This patch improves support for multiple radio devices. In previous versions all region relevant settings were derived from one module parameter. As in future versions, the region and other configuration should be configurable per device from the user space, this patch already retrieves all relevant information from the actual device specific settings. Signed-off-by:
-
Tobias Lorenz authored
This patch mainly adds correct module_param access rights. Also there are a lot of small coding style enhancements and some corrections of the variable references in module_param. Signed-off-by:
-
Hans Verkuil authored
Looking at these headers as they appear in the kernel makes you wonder why it is done that way. Refer to the v4l-dvb repository where the full unstripped header can be found to understand the reasoning behind this. Signed-off-by:
Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by:
-
Hans Verkuil authored
- Convert to use v4l2-i2c-drv-legacy.h to be able to handle the new i2c API - Cleanups - Use v4l_dbg/v4l_info to have uniform kernel messages Signed-off-by:
-
Hans Verkuil authored
- Convert to use v4l2-i2c-drv-legacy.h to be able to handle the new i2c API - Cleanups - Use v4l_dbg/v4l_info to have uniform kernel messages Signed-off-by:
-
Hans Verkuil authored
- Convert to use v4l2-i2c-drv-legacy.h to be able to handle the new i2c API - Cleanups - Use v4l_dbg/v4l_info to have uniform kernel messages Signed-off-by:
-
Hans Verkuil authored
- Convert to use v4l2-i2c-drv-legacy.h to be able to handle the new i2c API - Cleanups - Use v4l_dbg/v4l_info to have uniform kernel messages Signed-off-by:
-
Hans Verkuil authored
- Convert to use v4l2-i2c-drv-legacy.h to be able to handle the new i2c API - Cleanups - Use v4l_dbg/v4l_info to have uniform kernel messages Signed-off-by:
-
Hans Verkuil authored
- Convert to use v4l2-i2c-drv-legacy.h to be able to handle the new i2c API - Cleanups - Use v4l_dbg/v4l_info to have uniform kernel messages Signed-off-by:
-
Hans Verkuil authored
- Convert to use v4l2-i2c-drv-legacy.h to be able to handle the new i2c API - Cleanups - Use v4l_dbg/v4l_info to have uniform kernel messages Signed-off-by:
-
Hans Verkuil authored
- Convert to use v4l2-i2c-drv-legacy.h to be able to handle the new i2c API - Cleanups - Use v4l_dbg/v4l_info to have uniform kernel messages Signed-off-by:
-
Hans Verkuil authored
- Convert to use v4l2-i2c-drv-legacy.h to be able to handle the new i2c API - Cleanups - Use v4l_dbg/v4l_info to have uniform kernel messages Signed-off-by:
-
Hans Verkuil authored
- Convert to use v4l2-i2c-drv-legacy.h to be able to handle the new i2c API - Cleanups - Use v4l_dbg/v4l_info to have uniform kernel messages Signed-off-by:
-
Hans Verkuil authored
- Convert to use v4l2-i2c-drv-legacy.h to be able to handle the new i2c API - Cleanups - Use v4l_dbg/v4l_info to have uniform kernel messages Signed-off-by:
-
Jean Delvare authored
The adapter class of the zoran driver was never set. However, converting i2c drivers used by zoran to the new i2c API requires this field to be correct. Signed-off-by:
Jean Delvare <khali@linux-fr.org> Signed-off-by:
-
Manu Abraham authored
Signed-off-by:
Manu Abraham <manu@linuxtv.org> Signed-off-by:
-
Manu Abraham authored
Signed-off-by:
-
David Ellingsworth authored
This patch prevents stk-webcam from updating usb device information once the camera has been removed. This prevents a crash that would otherwise occur if the camera is disconnected while it is still in use. Signed-off-by:
David Ellingsworth <david@identd.dyndns.org> Signed-off-by:
-
David Ellingsworth authored
This patch: 1) removes the unnecessary kref.h include file 2) removes unnecessary pointer validation from read and poll routines. (Neither poll nor read may be called unless a call to open succeeds. A successful call to open will always set the file private_data pointer. Verifying that it is not null is therefore unnecessary. The associated release and mmap calls currently ignore this check.) 3) adds a space to syslog output. 4) removes an unused function prototype. Signed-off-by:
-
Hans Verkuil authored
Ian Armstrong pointed out to me that it is perfectly valid to have a 576 lines YUV video with NTSC output in this particular case. In fact, without this the X driver for ivtv does not function properly. Reverted my earlier change that restrictred the height to 480 for NTSC and add the comments provided by Ian to explain what is happening here. Thanks-to: Ian Armstrong <ian@iarmst.co.uk> Signed-off-by:
-
Ian Armstrong authored
Modifies behaviour of a failed dma write() operation for the yuv device. If the dma transfer for the yuv device fails, the write() operation will now exit immediately. Signed-off-by:
Ian Armstrong <ian@iarmst.demon.co.uk> Signed-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging-2.6Linus Torvalds authored
* git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging-2.6: (25 commits) staging: at76_usb wireless driver Staging: workaround build system bug Staging: Lindent sxg.c Staging: SLICOSS: Call pci_release_regions at driver exit Staging: SLICOSS: Fix remaining type names Staging: SLICOSS: Fix warnings due to static usage Staging: SLICOSS: lots of checkpatch fixes Staging: go7007 v4l fixes Staging: Fix gcc warnings in sxg Staging: add echo cancelation module Staging: add wlan-ng prism2 usb driver Staging: add w35und wifi driver Staging: USB/IP: add host driver Staging: USB/IP: add client driver Staging: USB/IP: add common functions needed Staging: add the go7007 video driver Staging: add me4000 pci data collection driver Staging: add me4000 firmware files Staging: add sxg network driver Staging: add Alacritech slicoss network driver ... Fixed up conflicts due to taint flags changes and MAINTAINERS cleanup in MAINTAINERS, include/linux/kernel.h and kernel/panic.c.
-
git://jdelvare.pck.nerim.net/jdelvare-2.6Linus Torvalds authored
* 'hwmon-for-linus' of git://jdelvare.pck.nerim.net/jdelvare-2.6: (47 commits) hwmon: (adm1026) Prevent log spamming hwmon: (adm1026) Fix debug messages hwmon: (adm1029) Use mask for fan_div value hwmon: (adt7470) Add documentation hwmon: (ibmaem) Automatically load on IBM systems via DMI hwmon: (ibmpex) Automatically load on IBM systems via DMI hwmon: (w83781d) Use new style driver binding hwmon: (w83781d) Stop abusing struct i2c_client for ISA devices hwmon: (w83781d) Make ISA interface depend on CONFIG_ISA hwmon: (w83781d) Additional information about AS99127F PWM hwmon: (w83781d) Detect alias chips hwmon: (w83781d) Refactor beep enable handling hwmon: Drop dead links to old National Semiconductor chip datasheets hwmon: (w83791d) add support for thermal cruise mode hwmon: (w83791d) add pwm_enable support hwmon: (w83791d) add manual PWM support hwmon: (w83791d) fan 4/5 pins can also be used for gpio hwmon: (max1619) Use inline functions instead of macros hwmon: (it87) Fix thermal sensor type values hwmon: (lm78) Convert to a new-style i2c driver ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6Linus Torvalds authored
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6: ALSA: Fix debugfs_create_dir's error checking method for sound/soc/ ALSA: ASoC: Convert playpaq_wm8510 to bulk route registration API ALSA: kernel docs: fix sound/core/ kernel-doc ALSA: Handle NULL jacks in snd_jack_report() ALSA: hda - Fix PCM type of Nvidia HDMI devices
-
git://git.kernel.dk/linux-2.6-blockLinus Torvalds authored
* 'for-linus' of git://git.kernel.dk/linux-2.6-block: block: remove __generic_unplug_device() from exports block: move q->unplug_work initialization blktrace: pass zfcp driver data blktrace: add support for driver data block: fix current kernel-doc warnings block: only call ->request_fn when the queue is not stopped block: simplify string handling in elv_iosched_store() block: fix kernel-doc for blk_alloc_devt() block: fix nr_phys_segments miscalculation bug block: add partition attribute for partition number block: add BIG FAT WARNING to CONFIG_DEBUG_BLOCK_EXT_DEVT softirq: Add support for triggering softirq work on softirqs.
-
git://www.jni.nu/crisLinus Torvalds authored
* 'for-linus' of git://www.jni.nu/cris: CRIS: proper defconfig setup [CRIS] Rename boot-linkscripts and fix the path to them.
-
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6Linus Torvalds authored
* git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6: (39 commits) [SCSI] sd: fix compile failure with CONFIG_BLK_DEV_INTEGRITY=n libiscsi: fix locking in iscsi_eh_device_reset libiscsi: check reason why we are stopping iscsi session to determine error value [SCSI] iscsi_tcp: return a descriptive error value during connection errors [SCSI] libiscsi: rename host reset to target reset [SCSI] iscsi class: fix endpoint id handling [SCSI] libiscsi: Support drivers initiating session removal [SCSI] libiscsi: fix data corruption when target has to resend data-in packets [SCSI] sd: Switch kernel printing level for DIF messages [SCSI] sd: Correctly handle all combinations of DIF and DIX [SCSI] sd: Always print actual protection_type [SCSI] sd: Issue correct protection operation [SCSI] scsi_error: fix target reset handling [SCSI] lpfc 8.2.8 v2 : Add statistical reporting control and additional fc vendor events [SCSI] lpfc 8.2.8 v2 : Add sysfs control of target queue depth handling [SCSI] lpfc 8.2.8 v2 : Revert target busy in favor of transport disrupted [SCSI] scsi_dh_alua: remove REQ_NOMERGE [SCSI] lpfc 8.2.8 : update driver version to 8.2.8 [SCSI] lpfc 8.2.8 : Add MSI-X support [SCSI] lpfc 8.2.8 : Update driver to use new Host byte error code DID_TRANSPORT_DISRUPTED ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6Linus Torvalds authored
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6: net: Remove CONFIG_KMOD from net/ (towards removing CONFIG_KMOD entirely) ipv4: Add a missing rcu_assign_pointer() in routing cache. [netdrvr] ibmtr: PCMCIA IBMTR is ok on 64bit xen-netfront: Avoid unaligned accesses to IP header lmc: copy_*_user under spinlock [netdrvr] myri10ge, ixgbe: remove broken select INTEL_IOATDMA
-
Jean Delvare authored
When debugging is enabled, the adm1026 driver currently logs the message "Setting VID from GPIO11-15" 108 times each time you run "sensors". Once should be enough. Signed-off-by: -
Jean Delvare authored
* Add missing new-line to one debug message. * Remove leading colon from 3 debug messages. Signed-off-by: -
Corentin Labbe authored
This is my patch for testing correct values of fan div in adm1029 and prevent a division by 0 for some (unlikely) register values. Signed-off-by:
Corentin Labbe <corentin.labbe@geomatys.fr> Signed-off-by:
-
Darrick J. Wong authored
Add at least the bare minimum of documentation for this chip. Signed-off-by:
Darrick J. Wong <djwong@us.ibm.com> Signed-off-by:
-
Darrick J. Wong authored
Signed-off-by:
-
Darrick J. Wong authored
Signed-off-by:
-
Wolfgang Grandegger authored
This patch modifies the w83781d driver to use new style driver binding. Substantial code modifications are required to deal with the new interface, especially legacy device detection. [JD: largely edited to make the patch smaller and to get the driver to work again on ISA devices.] Signed-off-by:
Wolfgang Grandegger <wg@grandegger.com> Signed-off-by:
-
Jean Delvare authored
Upcoming changes to the I2C part of the w83781d driver will cause ISA devices to no longer have a struct i2c_client at hand. So, we must stop (ab)using it now. Signed-off-by: -
Wolfgang Grandegger authored
Probing the ISA bus on systems without ISA bus may hang the system. This patch makes the ISA bus related code depend on the kernel configuration parameter CONFIG_ISA. It moves ISA bus related code into one #ifdef CONFIG_ISA ... #endif block and adds some helper function. Signed-off-by:
-
Jean Delvare authored
This information was provided in lm-sensors ticket #2350: http://www.lm-sensors.org/ticket/2350 This is IMHO still not enough to be able to safely implement fan control support for the AS99127F, but this is valuable information so I am adding it to the documentation. Signed-off-by:
-
Jean Delvare authored
The W83781D and W83782D can be accessed either on the I2C bus or the ISA bus. We must not access the same chip through both interfaces. So far we were relying on the user passing the correct ignore parameter to skip the registration of the I2C interface as suggested by sensors-detect, but this is fragile: the user may load the w83781d driver without running sensors-detect, and the i2c bus numbers are not stable across reboots and hardware changes. So, better detect alias chips in the driver directly, and skip any I2C chip which is obviously an alias of the ISA chip. This is done by comparing the value of 26 selected registers. Signed-off-by:
-
