This patch adds the nl80211 structs, definitions, policies and parsing
code required to pass fixed HE rate, GI and LTF settings.
Signed-off-by: Miles Hu <milehu@codeaurora.org>
Signed-off-by: John Crispin <john@phrozen.org>
Link: https://lore.kernel.org/r/20200804081630.2013619-1-john@phrozen.org
[fix comment]
Signed-off-by: Johannes Berg <johannes.berg@intel.com>

The CMD_PORT_AUTHORIZED event was described as an event which indicated
a successfully completed 4-way handshake. But the behavior was
not as advertized. The only driver which uses this is brcmfmac, and
this driver only sends the event after a successful 802.1X-FT roam.

This prevents userspace applications from knowing if the 4-way completed
on:

1. Normal 802.1X connects
2. Normal PSK connections
3. FT-PSK roams

wpa_supplicant handles this incorrect behavior by just completing
the connection after association, before the 4-way has completed.
If the 4-way ends up failing it disconnects at that point.

Since this behavior appears to be expected (wpa_s handles it this
way) I have changed the wording in the API description to reflect the
actual behavior.
Signed-off-by: James Prestwood <prestwoj@gmail.com>
Link: https://lore.kernel.org/r/20200413162053.3711-1-prestwoj@gmail.com
[fix spelling of 802.1X throughout ...]
Signed-off-by: Johannes Berg <johannes.berg@intel.com>

Some usable channels are located in the union of adjacent
regulatory rules, for example channel 144 in Germany.

Enable them, by also checking if a channel spans two adjacent
regulatory rules/frequency ranges.

All flags involved are disabling things, therefore we can build
the maximum by or-ing them together. Furthermore, take the maximum
of DFS CAC time values and the minimum of allowed power of both
adjacent channels in order to comply with both regulatory rules at
the same time.
Signed-off-by: Markus Theil <markus.theil@tu-ilmenau.de>
Link: https://lore.kernel.org/r/20200803144353.305538-2-markus.theil@tu-ilmenau.de
[remove unrelated comment changes]
Signed-off-by: Johannes Berg <johannes.berg@intel.com>

As a preparation to handle adjacent rule channels,
factor out handling channels located in a single
regulatory rule.
Signed-off-by: Markus Theil <markus.theil@tu-ilmenau.de>
Link: https://lore.kernel.org/r/20200803144353.305538-1-markus.theil@tu-ilmenau.deSigned-off-by: Johannes Berg <johannes.berg@intel.com>

We have a few attributes with minimum and maximum lengths that are
not the same, use the new feature of being able to specify both in
the policy to validate them, removing code and allowing this to be
advertised to userspace in the policy export.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Link: https://lore.kernel.org/r/20200819085642.8f12ffa14f33.I9d948d59870e521febcd79bb4a986b1de1dca47b@changeidSigned-off-by: Johannes Berg <johannes.berg@intel.com>

Use the policy to validate minimum and exact lengths in
some attributes that weren't previously covered in the
right ways, and remove associated validation code.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Link: https://lore.kernel.org/r/20200805154714.3ba1e233cfa0.I5dc8109b7ab5c3f4ae925f903a30cc9b35753262@changeidSigned-off-by: Johannes Berg <johannes.berg@intel.com>

Convert the uses of fallthrough comments to fallthrough macro.
Signed-off-by: Miaohe Lin <linmiaohe@huawei.com>
Link: https://lore.kernel.org/r/20200822082323.45495-1-linmiaohe@huawei.comSigned-off-by: Johannes Berg <johannes.berg@intel.com>

Drop the repeated word "be".
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Johannes Berg <johannes.berg@intel.com>
Cc: Kalle Valo <kvalo@codeaurora.org>
Cc: linux-wireless@vger.kernel.org
Link: https://lore.kernel.org/r/20200822231953.465-8-rdunlap@infradead.orgSigned-off-by: Johannes Berg <johannes.berg@intel.com>

Drop the repeated word "is".
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Johannes Berg <johannes.berg@intel.com>
Cc: Kalle Valo <kvalo@codeaurora.org>
Cc: linux-wireless@vger.kernel.org
Link: https://lore.kernel.org/r/20200822231953.465-7-rdunlap@infradead.orgSigned-off-by: Johannes Berg <johannes.berg@intel.com>

Drop repeated word "stored".
Change "is is" to "it is".
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Johannes Berg <johannes.berg@intel.com>
Cc: Kalle Valo <kvalo@codeaurora.org>
Cc: linux-wireless@vger.kernel.org
Link: https://lore.kernel.org/r/20200822231953.465-6-rdunlap@infradead.orgSigned-off-by: Johannes Berg <johannes.berg@intel.com>

Drop duplicated words "was" and "does".
Fix "let's" apostrophe.
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Johannes Berg <johannes.berg@intel.com>
Cc: Kalle Valo <kvalo@codeaurora.org>
Cc: linux-wireless@vger.kernel.org
Link: https://lore.kernel.org/r/20200822231953.465-5-rdunlap@infradead.orgSigned-off-by: Johannes Berg <johannes.berg@intel.com>

Drop the repeated word "Return" + fix verb.
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Johannes Berg <johannes.berg@intel.com>
Cc: Kalle Valo <kvalo@codeaurora.org>
Cc: linux-wireless@vger.kernel.org
Link: https://lore.kernel.org/r/20200822231953.465-4-rdunlap@infradead.orgSigned-off-by: Johannes Berg <johannes.berg@intel.com>

Drop the repeated word "address".
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Johannes Berg <johannes.berg@intel.com>
Cc: Kalle Valo <kvalo@codeaurora.org>
Cc: linux-wireless@vger.kernel.org
Link: https://lore.kernel.org/r/20200822231953.465-3-rdunlap@infradead.orgSigned-off-by: Johannes Berg <johannes.berg@intel.com>

Change "If if" to "If it".
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Johannes Berg <johannes.berg@intel.com>
Cc: Kalle Valo <kvalo@codeaurora.org>
Cc: linux-wireless@vger.kernel.org
Link: https://lore.kernel.org/r/20200822231953.465-2-rdunlap@infradead.orgSigned-off-by: Johannes Berg <johannes.berg@intel.com>

Rikard Falkeborn says:

====================
drivers/net: constify static ops-variables

This series constifies a number of static ops variables, to allow the
compiler to put them in read-only memory. Compile-tested only.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

The only usage of ath11k_thermal_ops is to pass its address to
thermal_cooling_device_register() which takes a const pointer. Make it
const to allow the compiler to put it in read-only memory.
Signed-off-by: Rikard Falkeborn <rikard.falkeborn@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The only usage of vsc8584_macsec_ops is to assign its address to the
macsec_ops field in the phydev struct, which is a const pointer. Make it
const to allow the compiler to put it in read-only memory.
Signed-off-by: Rikard Falkeborn <rikard.falkeborn@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The only usage of vddio_regulator_ops and vddh_regulator_ops is to
assign their address to the ops field in the regulator_desc struct,
which is a const pointer. Make them const to allow the compiler to
put them in read-only memory.
Signed-off-by: Rikard Falkeborn <rikard.falkeborn@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The only usage of bb_ops is to assign its address to the ops field in
the mdiobb_ctrl struct, which is a const pointer. Make it const to allow
the compiler to put it in read-only memory.
Signed-off-by: Rikard Falkeborn <rikard.falkeborn@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The only usage of bb_ops is to assign its address to the ops field in
the mdiobb_ctrl struct, which is a const pointer. Make it const to allow
the compiler to put it in read-only memory.
Signed-off-by: Rikard Falkeborn <rikard.falkeborn@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The only usage of qca_serdev_ops is to pass its address to
serdev_device_set_client_ops() which takes a const pointer. Make it
const to allow the compiler to put it in read-only memory.
Signed-off-by: Rikard Falkeborn <rikard.falkeborn@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Remove linux/notifier.h which is included more than once
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Wang Hai <wanghai38@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Lijun Pan says:

====================
refactoring of ibmvnic code

This patch series refactor reset_init and init functions,
and make some other cosmetic changes to make the code
easier to read and debug. v2 removes __func__ and v1's 1/5.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

These two functions share the majority of the code, hence merge
them together. In the meanwhile, add a reset pass-in parameter
to differentiate them. Thus, the code is easier to read and to tell
the difference between reset_init and regular init.
Signed-off-by: Lijun Pan <ljp@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

At the beginning of the function, from_passive_init is set false by
"adapter->from_passive_init = false;",
hence the if statement will never run.
Signed-off-by: Lijun Pan <ljp@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

When H_SEND_CRQ command returns with H_CLOSED, it means the
server's CRQ is not ready yet. Instead of resetting immediately,
we wait for the server to launch passive init.
ibmvnic_init() and ibmvnic_reset_init() should also return the
error code from ibmvnic_send_crq_init() call.
Signed-off-by: Lijun Pan <ljp@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Instead of comparing (adapter->init_done_rc == 1), let it
be (adapter->init_done_rc == PARTIALSUCCESS).
Signed-off-by: Lijun Pan <ljp@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Ido Schimmel says:

====================
ipv4: nexthop: Various improvements

This patch set contains various improvements that I made to the nexthop
object code while studying it towards my upcoming changes.

While patches #4 and #6 fix bugs, they are not regressions (never
worked). They also do not occur to me as critical issues, which is why I
am targeting them at net-next.

Tested with fib_nexthops.sh:

Tests passed: 134
Tests failed:   0
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

Test that an IPv6 route can not use a nexthop group with mixed IPv4 and
IPv6 nexthops, but can use it after replacing the IPv4 nexthops with
IPv6 nexthops.

Output without previous patch:

# ./fib_nexthops.sh -t ipv6_fcnal_runtime

IPv6 functional runtime
-----------------------
TEST: Route add                                                     [ OK ]
TEST: Route delete                                                  [ OK ]
TEST: Ping with nexthop                                             [ OK ]
TEST: Ping - multipath                                              [ OK ]
TEST: Ping - blackhole                                              [ OK ]
TEST: Ping - blackhole replaced with gateway                        [ OK ]
TEST: Ping - gateway replaced by blackhole                          [ OK ]
TEST: Ping - group with blackhole                                   [ OK ]
TEST: Ping - group blackhole replaced with gateways                 [ OK ]
TEST: IPv6 route with device only nexthop                           [ OK ]
TEST: IPv6 multipath route with nexthop mix - dev only + gw         [ OK ]
TEST: IPv6 route can not have a v4 gateway                          [ OK ]
TEST: Nexthop replace - v6 route, v4 nexthop                        [ OK ]
TEST: Nexthop replace of group entry - v6 route, v4 nexthop         [ OK ]
TEST: IPv6 route can not have a group with v4 and v6 gateways       [ OK ]
TEST: IPv6 route can not have a group with v4 and v6 gateways       [ OK ]
TEST: IPv6 route using a group after removing v4 gateways           [ OK ]
TEST: IPv6 route can not have a group with v4 and v6 gateways       [ OK ]
TEST: IPv6 route can not have a group with v4 and v6 gateways       [ OK ]
TEST: IPv6 route using a group after replacing v4 gateways          [FAIL]
TEST: Nexthop with default route and rpfilter                       [ OK ]
TEST: Nexthop with multipath default route and rpfilter             [ OK ]

Tests passed:  21
Tests failed:   1

Output with previous patch:

# ./fib_nexthops.sh -t ipv6_fcnal_runtime

IPv6 functional runtime
-----------------------
TEST: Route add                                                     [ OK ]
TEST: Route delete                                                  [ OK ]
TEST: Ping with nexthop                                             [ OK ]
TEST: Ping - multipath                                              [ OK ]
TEST: Ping - blackhole                                              [ OK ]
TEST: Ping - blackhole replaced with gateway                        [ OK ]
TEST: Ping - gateway replaced by blackhole                          [ OK ]
TEST: Ping - group with blackhole                                   [ OK ]
TEST: Ping - group blackhole replaced with gateways                 [ OK ]
TEST: IPv6 route with device only nexthop                           [ OK ]
TEST: IPv6 multipath route with nexthop mix - dev only + gw         [ OK ]
TEST: IPv6 route can not have a v4 gateway                          [ OK ]
TEST: Nexthop replace - v6 route, v4 nexthop                        [ OK ]
TEST: Nexthop replace of group entry - v6 route, v4 nexthop         [ OK ]
TEST: IPv6 route can not have a group with v4 and v6 gateways       [ OK ]
TEST: IPv6 route can not have a group with v4 and v6 gateways       [ OK ]
TEST: IPv6 route using a group after removing v4 gateways           [ OK ]
TEST: IPv6 route can not have a group with v4 and v6 gateways       [ OK ]
TEST: IPv6 route can not have a group with v4 and v6 gateways       [ OK ]
TEST: IPv6 route using a group after replacing v4 gateways          [ OK ]
TEST: Nexthop with default route and rpfilter                       [ OK ]
TEST: Nexthop with multipath default route and rpfilter             [ OK ]

Tests passed:  22
Tests failed:   0
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Each nexthop group contains an indication if it has IPv4 nexthops
('has_v4'). Its purpose is to prevent IPv6 routes from using groups with
IPv4 nexthops.

However, the indication is not updated when a nexthop is replaced. This
results in the kernel wrongly rejecting IPv6 routes from pointing to
groups that only contain IPv6 nexthops. Example:

# ip nexthop replace id 1 via 192.0.2.2 dev dummy10
# ip nexthop replace id 10 group 1
# ip nexthop replace id 1 via 2001:db8:1::2 dev dummy10
# ip route replace 2001:db8:10::/64 nhid 10
Error: IPv6 routes can not use an IPv4 nexthop.

Solve this by iterating over all the nexthop groups that the replaced
nexthop is a member of and potentially update their IPv4 indication
according to the new set of member nexthops.

Avoid wasting cycles by only performing the update in case an IPv4
nexthop is replaced by an IPv6 nexthop.
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Test that an IPv6 route can not use a nexthop group with mixed IPv4 and
IPv6 nexthops, but can use it after deleting the IPv4 nexthops.

Output without previous patch:

# ./fib_nexthops.sh -t ipv6_fcnal_runtime

IPv6 functional runtime
-----------------------
TEST: Route add                                                     [ OK ]
TEST: Route delete                                                  [ OK ]
TEST: Ping with nexthop                                             [ OK ]
TEST: Ping - multipath                                              [ OK ]
TEST: Ping - blackhole                                              [ OK ]
TEST: Ping - blackhole replaced with gateway                        [ OK ]
TEST: Ping - gateway replaced by blackhole                          [ OK ]
TEST: Ping - group with blackhole                                   [ OK ]
TEST: Ping - group blackhole replaced with gateways                 [ OK ]
TEST: IPv6 route with device only nexthop                           [ OK ]
TEST: IPv6 multipath route with nexthop mix - dev only + gw         [ OK ]
TEST: IPv6 route can not have a v4 gateway                          [ OK ]
TEST: Nexthop replace - v6 route, v4 nexthop                        [ OK ]
TEST: Nexthop replace of group entry - v6 route, v4 nexthop         [ OK ]
TEST: IPv6 route can not have a group with v4 and v6 gateways       [ OK ]
TEST: IPv6 route can not have a group with v4 and v6 gateways       [ OK ]
TEST: IPv6 route using a group after deleting v4 gateways           [FAIL]
TEST: Nexthop with default route and rpfilter                       [ OK ]
TEST: Nexthop with multipath default route and rpfilter             [ OK ]

Tests passed:  18
Tests failed:   1

Output with previous patch:

bash-5.0# ./fib_nexthops.sh -t ipv6_fcnal_runtime

IPv6 functional runtime
-----------------------
TEST: Route add                                                     [ OK ]
TEST: Route delete                                                  [ OK ]
TEST: Ping with nexthop                                             [ OK ]
TEST: Ping - multipath                                              [ OK ]
TEST: Ping - blackhole                                              [ OK ]
TEST: Ping - blackhole replaced with gateway                        [ OK ]
TEST: Ping - gateway replaced by blackhole                          [ OK ]
TEST: Ping - group with blackhole                                   [ OK ]
TEST: Ping - group blackhole replaced with gateways                 [ OK ]
TEST: IPv6 route with device only nexthop                           [ OK ]
TEST: IPv6 multipath route with nexthop mix - dev only + gw         [ OK ]
TEST: IPv6 route can not have a v4 gateway                          [ OK ]
TEST: Nexthop replace - v6 route, v4 nexthop                        [ OK ]
TEST: Nexthop replace of group entry - v6 route, v4 nexthop         [ OK ]
TEST: IPv6 route can not have a group with v4 and v6 gateways       [ OK ]
TEST: IPv6 route can not have a group with v4 and v6 gateways       [ OK ]
TEST: IPv6 route using a group after deleting v4 gateways           [ OK ]
TEST: Nexthop with default route and rpfilter                       [ OK ]
TEST: Nexthop with multipath default route and rpfilter             [ OK ]

Tests passed:  19
Tests failed:   0
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Each nexthop group contains an indication if it has IPv4 nexthops
('has_v4'). Its purpose is to prevent IPv6 routes from using groups with
IPv4 nexthops.

However, the indication is not updated when a nexthop is removed. This
results in the kernel wrongly rejecting IPv6 routes from pointing to
groups that only contain IPv6 nexthops. Example:

# ip nexthop replace id 1 via 192.0.2.2 dev dummy10
# ip nexthop replace id 2 via 2001:db8:1::2 dev dummy10
# ip nexthop replace id 10 group 1/2
# ip nexthop del id 1
# ip route replace 2001:db8:10::/64 nhid 10
Error: IPv6 routes can not use an IPv4 nexthop.

Solve this by updating the indication according to the new set of
member nexthops.
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The pointer is not RCU protected, so remove the unnecessary
rtnl_dereference(). This suppresses the following warning:

net/ipv4/nexthop.c:1101:24: error: incompatible types in comparison expression (different address spaces):
net/ipv4/nexthop.c:1101:24:    struct rb_node [noderef] __rcu *
net/ipv4/nexthop.c:1101:24:    struct rb_node *
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The code correctly uses nla_get_be32() to get the payload of the
attribute, but incorrectly uses nla_put_u32() to add the attribute to
the payload. This results in the following warning:

net/ipv4/nexthop.c:279:59: warning: incorrect type in argument 3 (different base types)
net/ipv4/nexthop.c:279:59:    expected unsigned int [usertype] value
net/ipv4/nexthop.c:279:59:    got restricted __be32 [usertype] ipv4

Suppress the warning by using nla_put_be32().
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The struct looks as follows:

struct nh_group {
	struct nh_group		*spare; /* spare group for removals */
	u16			num_nh;
	bool			mpath;
	bool			fdb_nh;
	bool			has_v4;
	struct nh_grp_entry	nh_entries[];
};

But its offset within 'struct nexthop' is also taken into account to
determine the allocation size.

Instead, use struct_size() to allocate only the required number of
bytes.
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Tariq Toukan says:

====================
net_prefetch API

This patchset adds a common net API for L1 cacheline size-aware prefetch.

Patch 1 introduces the common API in net and aligns the drivers to use it.
Patches 2 and 3 add usage in mlx4 and mlx5 Eth drivers.

Series generated against net-next commit:
079f921e Merge tag 'batadv-next-for-davem-20200824' of git://git.open-mesh.org/linux-merge
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

A single cacheline might not contain the packet header for
small L1_CACHE_BYTES values.
Use net_prefetch() as it issues an additional prefetch
in this case.
Signed-off-by: Tariq Toukan <tariqt@mellanox.com>
Reviewed-by: Saeed Mahameed <saeedm@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

A single cacheline might not contain the packet header for
small L1_CACHE_BYTES values.
Use net_prefetch() as it issues an additional prefetch
in this case.
Signed-off-by: Tariq Toukan <tariqt@mellanox.com>
Reviewed-by: Saeed Mahameed <saeedm@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Many device drivers use the same prefetch code structure to
deal with small L1 cacheline size.
Take this code into a function and call it from the drivers.
Suggested-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: Tariq Toukan <tariqt@mellanox.com>
Reviewed-by: Saeed Mahameed <saeedm@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Vineetha G. Jaya Kumaran says:

====================
Add Ethernet support for Intel Keem Bay SoC

This patch set enables support for Ethernet on the Intel Keem Bay SoC.
The first patch contains the required Device Tree bindings documentation,
while the second patch adds the Intel platform glue layer for the stmmac
device driver.

This driver was tested on the Keem Bay evaluation module board.
Changes since v2:
-Add a select in DT documentation to avoid matching with all nodes containing 'snps,dwmac'
-Rebased to 5.9-rc1

Changes since v1:
-Removed clocks maxItems property from DT bindings documentation
-Removed phy compatible strings from DT bindings documentation
====================
Signed-off-by: David S. Miller <davem@davemloft.net>