Impact: make load-balancing more consistent

In the update_shares() path leading to tg_shares_up(), the calculation of
per-cpu cfs_rq shares is rather erratic even under moderate task wake up
rate.  The problem is that the per-cpu tg->cfs_rq load weight used in the
sd_rq_weight aggregation and actual redistribution of the cfs_rq->shares
are collected at different time.  Under moderate system load, we've seen
quite a bit of variation on the cfs_rq->shares and ultimately wildly
affects sched_entity's load weight.

This patch caches the result of initial per-cpu load weight when doing the
sum calculation, and then pass it down to update_group_shares_cpu() for
redistributing per-cpu cfs_rq shares.  This allows consistent total cfs_rq
shares across all CPUs. It also simplifies the rounding and zero load
weight check.
Signed-off-by: Ken Chen <kenchen@google.com>
Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

Conflicts:
	kernel/Makefile

* 'for-linus' of git://git.kernel.dk/linux-2.6-block:
  block: hold extra reference to bio in blk_rq_map_user_iov()
  relay: fix cpu offline problem
  Release old elevator on change elevator
  block: fix boot failure with CONFIG_DEBUG_BLOCK_EXT_DEVT=y and nash
  block/md: fix md autodetection
  block: make add_partition() return pointer to hd_struct
  block: fix add_partition() error path

By using WARN(), kerneloops.org can collect which component is causing
the delay and make statistics about that. suspend_test_finish() is
currently the number 2 item but unless we can collect who's causing
it we're not going to be able to fix the hot topic ones..
Signed-off-by: Arjan van de Ven <arjan@linux.intel.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Merge branch 'tracing-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip

* 'tracing-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  kernel/profile.c: fix section mismatch warning
  function tracing: fix wrong pos computing when read buffer has been fulfilled
  tracing: fix mmiotrace resizing crash
  ring-buffer: no preempt for sched_clock()
  ring-buffer: buffer record on/off switch

Merge branch 'sched-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip

* 'sched-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  cpuset: fix regression when failed to generate sched domains
  sched, signals: fix the racy usage of ->signal in account_group_xxx/run_posix_cpu_timers
  sched: fix kernel warning on /proc/sched_debug access
  sched: correct sched-rt-group.txt pathname in init/Kconfig

Merge branch 'core-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip

* 'core-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  swiotlb: use coherent_dma_mask in alloc_coherent
  MAINTAINERS: remove me as RAID maintainer

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/cooloney/blackfin-2.6:
  Blackfin arch: fix a broken define in dma-mapping
  Blackfin arch: fix bug - Turn on DEBUG_DOUBLEFAULT, booting SMP kernel crash
  Blackfin arch: fix bug - shared lib function in L2 failed be called
  Blackfin arch: fix incorrect limit check for bf54x check_gpio
  Blackfin arch: fix bug - Cpufreq assumes clocks in kHz and not Hz.
  Blackfin arch: dont warn when running a kernel on the oldest supported silicon
  Blackfin arch: fix bug - kernel build with write back policy fails to be booted up
  Blackfin arch: fix bug - dmacopy test case fail on all platform
  Blackfin arch: Fix typo when adding CONFIG_DEBUG_VERBOSE
  Blackfin arch: don't copy bss when copying L1
  Blackfin arch: fix bug - Fail to boot jffs2 kernel for BF561 with SMP patch
  Blackfin arch: handle case of d_path() returning error in decode_address()

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6:
  ALSA: hda - Fix resume of GPIO unsol event for STAC/IDT
  ALSA: hda - Add quirks for HP Pavilion DV models
  ALSA: hda - Fix GPIO initialization in patch_stac92hd71bxx()
  ALSA: hda - Check model type instead of SSID in patch_92hd71bxx()
  ALSA: sound/pci/pcxhr/pcxhr.c: introduce missing kfree and pci_disable_device
  ALSA: hda: STAC_VREF_EVENT value change
  ALSA: hda - Missing NULL check in hda_beep.c
  ALSA: hda - Add digital beep playback switch for STAC/IDT codecs

If the size passed in is OK but we end up mapping too many segments,
we call the unmap path directly like from IO completion. But from IO
completion we have an extra reference to the bio, so this error case
goes OOPS when it attempts to free and already free bio.

Fix it by getting an extra reference to the bio before calling the
unmap failure case.
Reported-by: Petr Vandrovec <vandrove@vc.cvut.cz>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>

relay_open() will close allocated buffers when failed.
but if cpu offlined, some buffer will not be closed.
this patch fixed it.

and did cleanup for relay_reset() too.
Signed-off-by: Lai Jiangshan <laijs@cn.fujitsu.com>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>

We should release old elevator when change to use a new one.
Signed-off-by: Zhao Lei <zhaolei@cn.fujitsu.com>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>

We run into system boot failure with kernel 2.6.28-rc. We found it on a
couple of machines, including T61 notebook, nehalem machine, and another
HPC NX6325 notebook.  All the machines use FedoraCore 8 or FedoraCore 9.
With kernel prior to 2.6.28-rc, system boot doesn't fail.

I debug it and locate the root cause. Pls. see
http://bugzilla.kernel.org/show_bug.cgi?id=11899
https://bugzilla.redhat.com/show_bug.cgi?id=471517

As a matter of fact, there are 2 bugs.

1)root=/dev/sda1, system boot randomly fails. Mostly, boot for 5 times
and fails once. nash has a bug. Some of its functions misuse return
value 0.  Sometimes, 0 means timeout and no uevent available. Sometimes,
0 means nash gets an uevent, but the uevent isn't block-related (for
exmaple, usb). If by coincidence, kernel tells nash that uevents are
available, but kernel also set timeout, nash might stops collecting
other uevents in queue if current uevent isn't block-related.  I work
out a patch for nash to fix it.
http://bugzilla.kernel.org/attachment.cgi?id=18858

2) root=LABEL=/, system always can't boot. initrd init reports
switchroot fails. Here is an executation branch of nash when booting:
    (1) nash read /sys/block/sda/dev; Assume major is 8 (on my desktop)
    (2) nash query /proc/devices with the major number; It found line
	"8 sd";
    (3) nash use 'sd' to search its own probe table to find device (DISK)
	type for the device and add it to its own list;
    (4) Later on, it probes all devices in its list to get filesystem
	labels; scsi register "8 sd" always.

When major is 259, nash fails to find the device(DISK) type. I enables
CONFIG_DEBUG_BLOCK_EXT_DEVT=y when compiling kernel, so 259 is picked up
for device /dev/sda1, which causes nash to fail to find device (DISK)
type.

To fixing issue 2), I create a patch for nash and another patch for
kernel.

http://bugzilla.kernel.org/attachment.cgi?id=18859
http://bugzilla.kernel.org/attachment.cgi?id=18837

Below is the patch for kernel 2.6.28-rc4. It registers blkext, a new
block device in proc/devices.

With 2 patches on nash and 1 patch on kernel, I boot my machines for
dozens of times without failure.

Signed-off-by Zhang Yanmin <yanmin.zhang@linux.intel.com>
Acked-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>

Block ext devt conversion missed md_autodetect_dev() call in
rescan_partitions() leaving md autodetect unable to see partitions.
Fix it.
Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Neil Brown <neilb@suse.de>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>

Make add_partition() return pointer to the new hd_struct on success
and ERR_PTR() value on failure.  This change will be used to fix md
autodetection bug.
Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Neil Brown <neilb@suse.de>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>

Partition stats structure was not freed on devt allocation failure
path.  Fix it.
Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>

Use cached write for setting the GPIO unsolicited event mask to be
restored properly at resume.
Signed-off-by: Takashi Iwai <tiwai@suse.de>

Added the quirk entries for HP Pavilion DV5 and DV7 with model=hp-m4.

Reference: Novell bnc#445321, bnc#445161
	https://bugzilla.novell.com/show_bug.cgi?id=445321
	https://bugzilla.novell.com/show_bug.cgi?id=445161Signed-off-by: Takashi Iwai <tiwai@suse.de>

dma_mapping_error is an actual function, so fix broken define with a
real inline stub
Signed-off-by: Mike Frysinger <vapier.adi@gmail.com>
Signed-off-by: Bryan Wu <cooloney@kernel.org>

Signed-off-by: Graf Yang <graf.yang@analog.com>
Signed-off-by: Bryan Wu <cooloney@kernel.org>

Fixed the GPIO mask and co initialization in patch_stac92hd71bxx()
so that the gpio_maks for HP_M4 model is set properly.
Signed-off-by: Takashi Iwai <tiwai@suse.de>

Impact: fix section mismatch warning in kernel/profile.c

Here, profile_nop function has been called from a non-init function
create_hash_tables(void). Which generetes a section mismatch warning.
Previously, create_hash_tables(void) was a init function. So, removing
__init from create_hash_tables(void) requires profile_nop to be
non-init.

This patch makes profile_nop function inline and fixes the
following warning:

 WARNING: vmlinux.o(.text+0x6ebb6): Section mismatch in reference from
 the function create_hash_tables() to the function
 .init.text:profile_nop()
 The function create_hash_tables() references
 the function __init profile_nop().
 This is often because create_hash_tables lacks a __init
 annotation or the annotation of profile_nop is wrong.
Signed-off-by: Rakib Mullick <rakib.mullick@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

Impact: properly rebuild sched-domains on kmalloc() failure

When cpuset failed to generate sched domains due to kmalloc()
failure, the scheduler should fallback to the single partition
'fallback_doms' and rebuild sched domains, but now it only
destroys but not rebuilds sched domains.

The regression was introduced by:

| commit dfb512ec
| Author: Max Krasnyansky <maxk@qualcomm.com>
| Date:   Fri Aug 29 13:11:41 2008 -0700
|
|    sched: arch_reinit_sched_domains() must destroy domains to force rebuild

After the above commit, partition_sched_domains(0, NULL, NULL) will
only destroy sched domains and partition_sched_domains(1, NULL, NULL)
will create the default sched domain.
Signed-off-by: Li Zefan <lizf@cn.fujitsu.com>
Cc: Max Krasnyansky <maxk@qualcomm.com>
Cc: <stable@kernel.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

* git://git.kernel.org/pub/scm/linux/kernel/git/sfrench/cifs-2.6:
  prevent cifs_writepages() from skipping unwritten pages
  Fixed parsing of mount options when doing DFS submount
  [CIFS] Fix check for tcon seal setting and fix oops on failed mount from earlier patch
  [CIFS] Fix build break
  cifs: reinstate sharing of tree connections
  [CIFS] minor cleanup to cifs_mount
  cifs: reinstate sharing of SMB sessions sans races
  cifs: disable sharing session and tcon and add new TCP sharing code
  [CIFS] clean up server protocol handling
  [CIFS] remove unused list, add new cifs sock list to prepare for mount/umount fix
  [CIFS] Fix cifs reconnection flags
  [CIFS] Can't rely on iov length and base when kernel_recvmsg returns error

Fixes a data corruption under heavy stress in which pages could be left
dirty after all open instances of a inode have been closed.

In order to write contiguous pages whenever possible, cifs_writepages()
asks pagevec_lookup_tag() for more pages than it may write at one time.
Normally, it then resets index just past the last page written before calling
pagevec_lookup_tag() again.

If cifs_writepages() can't write the first page returned, it wasn't resetting
index, and the next call to pagevec_lookup_tag() resulted in skipping all of
the pages it previously returned, even though cifs_writepages() did nothing
with them.  This can result in data loss when the file descriptor is about
to be closed.

This patch ensures that index gets set back to the next returned page so
that none get skipped.
Signed-off-by: Dave Kleikamp <shaggy@linux.vnet.ibm.com>
Acked-by: Jeff Layton <jlayton@redhat.com>
Cc: Shirish S Pargaonkar <shirishp@us.ibm.com>
Signed-off-by: Steve French <sfrench@us.ibm.com>

Since these hit the same routines, and are relatively small, it is easier to review
them as one patch.

Fixed incorrect handling of the last option in some cases
Fixed prefixpath handling convert path_consumed into host depended string length (in bytes)
Use non default separator if it is provided in the original mount options
Acked-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Igor Mammedov <niallain@gmail.com>
Signed-off-by: Steve French <sfrench@us.ibm.com>

For some unknown reason at Steven Rostedt added in disabling of the SPE
instruction generation for e500 based PPC cores in commit
6ec56232.

We are removing it because:

1. It generates e500 kernels that don't work
2. its not the correct set of flags to do this
3. we handle this in the arch/powerpc/Makefile already
4. its unknown in talking to Steven why he did this
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
Tested-and-Acked-by: Steven Rostedt <srostedt@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

* 'for-linus' of git://git.o-hand.com/linux-mfd:
  mfd: Correct WM8350 I2C return code usage
  mfd: fix event masking for da9030

set tcon->ses earlier

If the inital tree connect fails, we'll end up calling cifs_put_smb_ses
with a NULL pointer. Fix it by setting the tcon->ses earlier.
Acked-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Steve French <sfrench@us.ibm.com>

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc-2.6:
  rtc: rtc-sun4v fixes, revised
  sparc: Fix tty compile warnings.
  sparc: struct device - replace bus_id with dev_name(), dev_set_name()

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6: (27 commits)
  rtnetlink: propagate error from dev_change_flags in do_setlink()
  isdn: remove extra byteswap in isdn_net_ciscohdlck_slarp_send_reply
  Phonet: refuse to send bigger than MTU packets
  e1000e: fix IPMI traffic
  e1000e: fix warn_on reload after phy_id error
  phy: fix phy address bug
  e100: fix dma error in direction for mapping
  igb: use dev_printk instead of printk
  qla3xxx: Cleanup: Fix link print statements.
  igb: Use device_set_wakeup_enable
  e1000: Use device_set_wakeup_enable
  e1000e: Use device_set_wakeup_enable
  via-velocity: enable perfect filtering for multicast packets
  phy: Add support for Marvell 88E1118 PHY
  mlx4_en: Pause parameters per port
  phylib: fix premature freeing of struct mii_bus
  atl1: Do not enumerate options unsupported by chip
  atl1e: fix broken multicast by removing unnecessary crc inversion
  gianfar: Fix DMA unmap invocations
  net/ucc_geth: Fix oops in uec_get_ethtool_stats()
  ...

Impact: fix potential NULL dereference

Contrary to ad474cac changelog, other
acct_group_xxx() helpers can be called after exit_notify() by timer tick.
Thanks to Roland for pointing out this. Somehow I missed this simple fact
when I read the original patch, and I am afraid I confused Frank during
the discussion. Sorry.

Fortunately, these helpers work with current, we can check ->exit_state
to ensure that ->signal can't go away under us.

Also, add the comment and compiler barrier to account_group_exec_runtime(),
to make sure we load ->signal only once.
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

Impact: fix DMA buffer allocation coherency bug in certain configs

This patch fixes swiotlb to use dev->coherent_dma_mask in
swiotlb_alloc_coherent().

coherent_dma_mask is a subset of dma_mask (equal to it most of
the time), enumerating the address range that a given device
is able to DMA to/from in a cache-coherent way.

But currently, swiotlb uses dev->dma_mask in alloc_coherent()
implicitly via address_needs_mapping(), but alloc_coherent is really
supposed to use coherent_dma_mask.

This bug could break drivers that uses smaller coherent_dma_mask than
dma_mask (though the current code works for the majority that use the
same mask for coherent_dma_mask and dma_mask).
Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Cc: tony.luck@intel.com
Signed-off-by: Ingo Molnar <mingo@elte.hu>

Unlike ifconfig, iproute doesn't report an error when setting
an interface up fails:

(example: put wireless network mac80211 interface into repeater mode
with iwconfig but do not set a peer MAC address, it should fail with
-ENOLINK)

without patch:
# ip link set wlan0 up ; echo $?
0
# 

with patch:
# ip link set wlan0 up ; echo $?
RTNETLINK answers: Link has been severed
2
# 

Propagate the return value from dev_change_flags() to fix this.
Signed-off-by: Patrick McHardy <kaber@trash.net>
Tested-by: Johannes Berg <johannes@sipsolutions.net>
Signed-off-by: Johannes Berg <johannes@sipsolutions.net>
Signed-off-by: David S. Miller <davem@davemloft.net>

commit a144ea4b [IPV4]: annotate struct in_ifaddr

Missed this extra byteswap as the isdn inlines hide the htonl inside
put_u32 which causes an extra byteswap on little-endian arches.
Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Signed-off-by: Steve French <sfrench@us.ibm.com>

Signed-off-by: Rémi Denis-Courmont <remi.denis-courmont@nokia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Use a similar approach to the SMB session sharing. Add a list of tcons
attached to each SMB session. Move the refcount to non-atomic. Protect
all of the above with the cifs_tcp_ses_lock. Add functions to
properly find and put references to the tcons.
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Steve French <sfrench@us.ibm.com>

Some users reported that they have machines with BMCs enabled that cannot
receive IPMI traffic after e1000e is loaded.
http://marc.info/?l=e1000-devel&m=121909039127414&w=2
http://marc.info/?l=e1000-devel&m=121365543823387&w=2

This fixes the issue if they load with the new parameter = 0 by disabling
crc stripping, but leaves the performance feature on for most users.
Based on work done by Hong Zhang.
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>