- 03 Jan, 2008 11 commits
-
-
Samuel Thibault authored
The console is now by default in UTF-8 mode. Fix the documentation on the default value, so that we can explain behaviour that otherwise causes bug-reports like this: http://bugzilla.kernel.org/show_bug.cgi?id=9319 Also add the needed "vt." prefix, so that the boot-time config options to switch back to the legacy 8-bit mode is actually documented correctly. Signed-off-by: Samuel Thibault <samuel.thibault@ens-lyon.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
git://lm-sensors.org/kernel/mhoffman/hwmon-2.6Linus Torvalds authored
* 'release' of git://lm-sensors.org/kernel/mhoffman/hwmon-2.6: hwmon: (w83627ehf) Be more careful when changing VID input level
-
git://git.kernel.org/pub/scm/linux/kernel/git/mingo/linux-2.6-schedLinus Torvalds authored
* git://git.kernel.org/pub/scm/linux/kernel/git/mingo/linux-2.6-sched: sched: fix gcc warnings
-
git://git.linux-nfs.org/pub/linux/nfs-2.6Linus Torvalds authored
* git://git.linux-nfs.org/pub/linux/nfs-2.6: NFSv4: Fix open_to_lock_owner sequenceid allocation... NFSv4: nfs4_open_confirm must not set the open_owner as confirmed on error NFS: add newline to kernel warning message in auth_gss code NFSv4: Fix circular locking dependency in nfs4_kill_renewd NFS: Fix a possible Oops in fs/nfs/super.c
-
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-rc-fixes-2.6Linus Torvalds authored
* git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-rc-fixes-2.6: [SCSI] scsi_sysfs: restore prep_fn when ULD is removed
-
Trond Myklebust authored
NFSv4 file locking is currently completely broken since it doesn't respect the OPEN sequencing when it is given an unconfirmed lock_owner and needs to do an open_to_lock_owner. Worse: it breaks the sunrpc rules by doing a GFP_KERNEL allocation inside an rpciod callback. Fix is to preallocate the open seqid structure in nfs4_alloc_lockdata if we see that the lock_owner is unconfirmed. Then, in nfs4_lock_prepare() we wait for either the open_seqid, if the lock_owner is still unconfirmed, or else fall back to waiting on the standard lock_seqid. Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
-
Trond Myklebust authored
RFC3530 states that the open_owner is confirmed if and only if the client sends an OPEN_CONFIRM request with the appropriate sequence id and stateid within the lease period. Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
-
James Morris authored
Add newline to kernel warning message in gss_create(). Signed-off-by: James Morris <jmorris@namei.org> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
-
Trond Myklebust authored
Erez Zadok reports: ======================================================= [ INFO: possible circular locking dependency detected ] 2.6.24-rc6-unionfs2 #80 ------------------------------------------------------- umount.nfs4/4017 is trying to acquire lock: (&(&clp->cl_renewd)->work){--..}, at: [<c0223e53>] __cancel_work_timer+0x83/0x17f but task is already holding lock: (&clp->cl_sem){----}, at: [<f8879897>] nfs4_kill_renewd+0x17/0x29 [nfs] which lock already depends on the new lock. the existing dependency chain (in reverse order) is: -> #1 (&clp->cl_sem){----}: [<c0230699>] __lock_acquire+0x9cc/0xb95 [<c0230c39>] lock_acquire+0x5f/0x78 [<c0397cb8>] down_read+0x3a/0x4c [<f88798e6>] nfs4_renew_state+0x1c/0x1b8 [nfs] [<c0223821>] run_workqueue+0xd9/0x1ac [<c0224220>] worker_thread+0x7a/0x86 [<c0226b49>] kthread+0x3b/0x62 [<c02033a3>] kernel_thread_helper+0x7/0x10 [<ffffffff>] 0xffffffff -> #0 (&(&clp->cl_renewd)->work){--..}: [<c0230589>] __lock_acquire+0x8bc/0xb95 [<c0230c39>] lock_acquire+0x5f/0x78 [<c0223e87>] __cancel_work_timer+0xb7/0x17f [<c0223f5a>] cancel_delayed_work_sync+0xb/0xd [<f887989e>] nfs4_kill_renewd+0x1e/0x29 [nfs] [<f885a8f6>] nfs_free_client+0x37/0x9e [nfs] [<f885ab20>] nfs_put_client+0x5d/0x62 [nfs] [<f885ab9a>] nfs_free_server+0x75/0xae [nfs] [<f8862672>] nfs4_kill_super+0x27/0x2b [nfs] [<c0258aab>] deactivate_super+0x3f/0x51 [<c0269668>] mntput_no_expire+0x42/0x67 [<c025d0e4>] path_release_on_umount+0x15/0x18 [<c0269d30>] sys_umount+0x1a3/0x1cb [<c0269d71>] sys_oldumount+0x19/0x1b [<c02026ca>] sysenter_past_esp+0x5f/0xa5 [<ffffffff>] 0xffffffff Looking at the code, it would seem that taking the clp->cl_sem in nfs4_kill_renewd is completely redundant, since we're already guaranteed to have exclusive access to the nfs_client (we're shutting down). Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
-
Trond Myklebust authored
Sigh... commit 4584f520 (NFS: Fix NFS mountpoint crossing...) had a slight flaw: server can be NULL if sget() returned an existing superblock. Fix the fix by dereferencing s->s_fs_info. Thanks to Coverity/Adrian Bunk and Frank Filz for spotting the bug. (See http://bugzilla.kernel.org/show_bug.cgi?id=9647) Also add in the same namespace Oops fix for NFSv4 in both the mountpoint crossing case, and the referral case. Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
-
Jean Delvare authored
The VID input level change has been reported to cause trouble. Be more careful in this respect: * Only change the level on the W83627EHF/EHG. The W83627DHG is more complex in this respect. * Don't change the level if the VID pins are in output mode. * Only set the level to TTL if VRM 9.x is used. Signed-off-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Mark M. Hoffman <mhoffman@lightlink.com>
-
- 02 Jan, 2008 8 commits
-
-
Linus Torvalds authored
The previous commit missed one use of "may_attach()" that had been renamed to __ptrace_may_attach(). Tssk, tssk, Al. Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Al Viro authored
Contents of /proc/*/maps is sensitive and may become sensitive after open() (e.g. if target originally shares our ->mm and later does exec on suid-root binary). Check at read() (actually, ->start() of iterator) time that mm_struct we'd grabbed and locked is - still the ->mm of target - equal to reader's ->mm or the target is ptracable by reader. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Acked-by: Rik van Riel <riel@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Ingo Molnar authored
This reverts commit 6f5391c2 ("[SCSI] Get rid of scsi_cmnd->done") that was supposed to be a cleanup commit, but apparently it causes regressions: Bug 9370 - v2.6.24-rc2-409-g9418d5dc: attempt to access beyond end of device http://bugzilla.kernel.org/show_bug.cgi?id=9370 this patch should be reintroduced in a more split-up form to make testing of it easier. Signed-off-by: Ingo Molnar <mingo@elte.hu> Acked-by: Matthew Wilcox <matthew@wil.cx> Cc: James Bottomley <James.Bottomley@HansenPartnership.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Linus Torvalds authored
Both SLUB and SLAB really did almost exactly the same thing for /proc/slabinfo setup, using duplicate code and per-allocator #ifdef's. This just creates a common CONFIG_SLABINFO that is enabled by both SLUB and SLAB, and shares all the setup code. Maybe SLOB will want this some day too. Reviewed-by: Pekka Enberg <penberg@cs.helsinki.fi> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
James Bottomley authored
A recent bug report: http://bugzilla.kernel.org/show_bug.cgi?id=9674 Was caused because the ULDs now set their own prep functions, but don't necessarily reset the prep function back to the SCSI default when they are removed. This leads to panics if commands are sent to the device after the module is removed because the prep_fn is still pointing to the old module code. The fix for this is to implement a bus remove method that resets the prep_fn pointer correctly before calling the ULD specific driver remove method. Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
-
Pekka Enberg authored
We need to register slabinfo to procfs when CONFIG_SLUB is enabled to make the file actually visible to user-space. Signed-off-by: Pekka Enberg <penberg@cs.helsinki.fi> Acked-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpcLinus Torvalds authored
* 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc: [POWERPC] Fix build failure on Cell when CONFIG_SPU_FS=y
-
Paul Mackerras authored
Commit aed3a8c9 introduced a definition of notify_spus_active in .../cell/spu_syscalls.c, and another definition under #ifndef MODULE in .../cell/spufs/sched.c. The latter is not necessary and causes the build to fail when CONFIG_SPU_FS=y, so this removes it. It also removes the export of do_notify_spus_active, which is unnecessary. Signed-off-by: Paul Mackerras <paulus@samba.org> Acked-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Jeremy Kerr <jk@ozlabs.org>
-
- 01 Jan, 2008 6 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/x86/linux-2.6-x86Linus Torvalds authored
* git://git.kernel.org/pub/scm/linux/kernel/git/x86/linux-2.6-x86: x86: fix asm-x86/msr.h for user-space export x86: fix asm-x86/byteorder.h for userspace export
-
git://git.o-hand.com/linux-rpurdie-ledsLinus Torvalds authored
* 'for-linus' of git://git.o-hand.com/linux-rpurdie-leds: leds: Fix locomo LED driver oops leds: Fix leds_list_lock locking issues
-
Pekka J Enberg authored
This adds a read-only /proc/slabinfo file on SLUB, that makes slabtop work. [ mingo@elte.hu: build fix. ] Cc: Andi Kleen <andi@firstfloor.org> Cc: Christoph Lameter <clameter@sgi.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Signed-off-by: Pekka Enberg <penberg@cs.helsinki.fi> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Rusty Russell authored
After 17d57a92 ("x86: fix x86-32 early fixmap initialization.") removing lg.ko caused a printk from vunmap: mm/memory.c:115: bad pgd 004b3027. On the second use after module load, the kernel crashes. This fixes the immediate problem (accessed and dirty bits not set as expected in pmd_none_or_clear_bad). I can't see why this would cause a crash, but I haven't been able to reproduce it once this is applied. Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Mike Frysinger authored
Use __asm__ and __volatile__ in code that is exported to userspace. Wrap kernel functions with __KERNEL__ so they get scrubbed. No code changed: text data bss dec hex filename 9681036 1698924 3407872 14787832 e1a4f8 vmlinux.before 9681036 1698924 3407872 14787832 e1a4f8 vmlinux.after Signed-off-by: Mike Frysinger <vapier@gentoo.org> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
-
Mike Frysinger authored
Since asm-x86/byteorder.h is exported to userspace, use __asm__ rather than asm in its code. Signed-Off-By: Mike Frysinger <vapier@gentoo.org> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
-
- 31 Dec, 2007 2 commits
-
-
Richard Purdie authored
Fix locomo-leds to use the correct struct device to prevent an oops. Signed-off-by: Richard Purdie <rpurdie@rpsys.net>
-
Richard Purdie authored
Covert leds_list_lock to a rw_sempahore to match previous LED trigger locking fixes, fixing lock ordering. Signed-off-by: Richard Purdie <rpurdie@rpsys.net>
-
- 30 Dec, 2007 4 commits
-
-
Ingo Molnar authored
Meelis Roos reported these warnings on sparc64: CC kernel/sched.o In file included from kernel/sched.c:879: kernel/sched_debug.c: In function 'nsec_high': kernel/sched_debug.c:38: warning: comparison of distinct pointer types lacks a cast the debug check in do_div() is over-eager here, because the long long is always positive in these places. Mark this by casting them to unsigned long long. no change in code output: text data bss dec hex filename 51471 6582 376 58429 e43d sched.o.before 51471 6582 376 58429 e43d sched.o.after md5: 7f7729c111f185bf3ccea4d542abc049 sched.o.before.asm 7f7729c111f185bf3ccea4d542abc049 sched.o.after.asm Signed-off-by: Ingo Molnar <mingo@elte.hu>
-
git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc-2.6Linus Torvalds authored
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc-2.6: [SERIAL]: Fix section mismatches in Sun serial console drivers.
-
Dave Young authored
Because of workqueue delay, the put_device could be called before device_del, so move it to del_conn. Signed-off-by: Dave Young <hidave.darkstar@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Gavin McCullagh authored
When a delayed ACK representing two packets arrives, there are two RTT samples available, one for each packet. The first (in order of seq number) will be artificially long due to the delay waiting for the second packet, the second will trigger the ACK and so will not itself be delayed. According to rfc1323, the SRTT used for RTO calculation should use the first rtt, so receivers echo the timestamp from the first packet in the delayed ack. For congestion control however, it seems measuring delayed ack delay is not desirable as it varies independently of congestion. The patch below causes seq_rtt and last_ackt to be updated with any available later packet rtts which should have less (and hopefully zero) delack delay. The rtt value then gets passed to ca_ops->pkts_acked(). Where TCP_CONG_RTT_STAMP was set, effort was made to supress RTTs from within a TSO chunk (!fully_acked), using only the final ACK (which includes any TSO delay) to generate RTTs. This patch removes these checks so RTTs are passed for each ACK to ca_ops->pkts_acked(). For non-delay based congestion control (cubic, h-tcp), rtt is sometimes used for rtt-scaling. In shortening the RTT, this may make them a little less aggressive. Delay-based schemes (eg vegas, veno, illinois) should get a cleaner, more accurate congestion signal, particularly for small cwnds. The congestion control module can potentially also filter out bad RTTs due to the delayed ack alarm by looking at the associated cnt which (where delayed acking is in use) should probably be 1 if the alarm went off or greater if the ACK was triggered by a packet. Signed-off-by: Gavin McCullagh <gavin.mccullagh@nuim.ie> Acked-by: Ilpo Järvinen <ilpo.jarvinen@helsinki.fi> Signed-off-by: David S. Miller <davem@davemloft.net>
-
- 29 Dec, 2007 1 commit
-
-
David S. Miller authored
We're exporting an __init function, oops :-) The core issue here is that add_preferred_console() is marked as __init, this makes it impossible to invoke this thing from a driver probe routine which is what the Sparc serial drivers need to do. There is no harm in dropping the __init marker. This code will actually work properly when invoked from a modular driver, except that init will probably not pick up the console change without some other support code. Then we can drop the __init from sunserial_console_match() and we're no longer exporting an __init function to modules. Signed-off-by: David S. Miller <davem@davemloft.net>
-
- 28 Dec, 2007 7 commits
-
-
Simon Horman authored
David Brownell pointed out a regression in my recent "Fix ip command line processing" patch. It turns out to be a fairly blatant oversight on my part whereby ic_enable is never set, and thus autoconfiguration is never enabled. Clearly my testing was broken :-( The solution that I have is to set ic_enable to 1 if we hit ip_auto_config_setup(), which basically means that autoconfiguration is activated unless told otherwise. I then flip ic_enable to 0 if ip=off, ip=none, ip=::::::off or ip=::::::none using ic_proto_name(); The incremental patch is below, let me know if a non-incremental version is prepared, as I did as for the original patch to be reverted pending a fix. Signed-off-by: Simon Horman <horms@verge.net.au> Signed-off-by: David S. Miller <davem@davemloft.net>
-
git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpcLinus Torvalds authored
* 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc: [POWERPC] PS3: Fix printing of os-area magic numbers [POWERPC] Oprofile: Remove dependency on spufs module
-
git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6Linus Torvalds authored
* git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: [CRYPTO] padlock: Fix spurious ECB page fault
-
Linus Torvalds authored
It appears that some PCI-E bridges do the wrong thing in the presense of CRS Software Visibility and MMCONFIG. In particular, it looks like an ATI bridge (device ID 7936) will return 0001 in the vendor ID field of any bridged devices indefinitely. Not enabling CRS SV avoids the problem, and as we currently do not really make good use of the feature anyway (we just time out rather than do any threaded discovery as suggested by the CRS specs), we're better off just not enabling it. This should fix a slew of problem reports with random devices (generally graphics adapters or fairly high-performance networking cards, since it only affected PCI-E) not getting properly recognized on these AMD systems. If we really want to use CRS-SV, we may end up eventually needing a whitelist of systems where this should be enabled, along with some kind of "pcibios_enable_crs()" query to call the system-specific code. Suggested-by: Loic Prylli <loic@myri.com> Tested-by: Kai Ruhnau <kai@tragetaschen.dyndns.org> Cc: Matthew Wilcox <matthew@wil.cx> Cc: Greg Kroah-Hartman <greg@kroah.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Geoff Levand authored
Fix a bug in the printing of the os-area magic numbers which assumed that magic numbers were zero terminated strings. The magic numbers are represented in memory as integers. If the os-area sections are not initialized correctly they could contained random data that would be printed to the display. Also unify the handling of header and db magic numbers and make both of type array of u8. Signed-off-by: Geoff Levand <geoffrey.levand@am.sony.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
-
Bob Nelson authored
This removes an OProfile dependency on the spufs module. This dependency was causing a problem for multiplatform systems that are built with support for Oprofile on Cell but try to load the oprofile module on a non-Cell system. Signed-off-by: Bob Nelson <rrnelson@us.ibm.com> Signed-off-by: Arnd Bergmann <arnd.bergmann@de.ibm.com> Acked-by: Jeremy Kerr <jk@ozlabs.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
-
Herbert Xu authored
The xcryptecb instruction always processes an even number of blocks so we need to ensure th existence of an extra block if we have to process an odd number of blocks. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
-
- 27 Dec, 2007 1 commit
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6Linus Torvalds authored
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6: [IPV4]: Fix ip command line processing. [VETH]: move veth.h to include/linux [NET] tc_nat: header install [TUNTAP]: Fix wrong debug message. [NETFILTER]: nf_conntrack_ipv4: fix module parameter compatibility mac80211: warn when receiving frames with unaligned data mac80211: round station cleanup timer
-