Add the SMB3 protocol flag definitions and structs for
change notify.  Future patches will add the hooks to
allow it to be invoked from the client.

See MS-FSCC 2.6 and MS-SMB2 2.2.35
Signed-off-by: Steve French <stfrench@microsoft.com>
Reviewed-by: Ronnie Sahlberg <lsahlber@redhat.com>

For zero-range that also extend the file we were sending this as a
compound of two different operations; a fsctl to set-zero-data for the range
and then an additional set-info to extend the file size.
This does not work for Azure since it does not support this fsctl which leads
to fallocate(FALLOC_FL_ZERO_RANGE) failing but still changing the file size.

To fix this we un-compound this and send these two operations as separate
commands, firsat one command to set-zero-data for the range and it this
was successful we proceed to send a set-info to update the file size.

This fixes xfstest generic/469 for Azure servers.
Signed-off-by: Ronnie Sahlberg <lsahlber@redhat.com>
Signed-off-by: Steve French <stfrench@microsoft.com>

Remove the conditional to fail zero-range if the file is not flagged as sparse.
You can still zero out a range in SMB2 even for non-sparse files.

Tested with stock windows16 server.

Fixes 5 xfstests (033, 149, 155, 180, 349)
Signed-off-by: Ronnie Sahlberg <lsahlber@redhat.com>
Signed-off-by: Steve French <stfrench@microsoft.com>

For compressed read support.  See MS-SMB2 3.1.4.4
Signed-off-by: Steve French <stfrench@microsoft.com>

Useful for improved copy performance as well as for
applications which query allocated ranges of sparse
files.
Signed-off-by: Ronnie Sahlberg <lsahlber@redhat.com>
Signed-off-by: Steve French <stfrench@microsoft.com>

See the latest MS-SMB2 protocol specification updates.
These will be needed for implementing compression support
on the wire for example.
Signed-off-by: Steve French <stfrench@microsoft.com>

SMB2 Ioctl responses from servers may respond with both the request blob from
the client followed by the actual reply blob for ioctls that are bi-directional.

In that case we can not assume that the reply blob comes immediately after the
ioctl response structure.

This fixes FSCTLs such as SMB2:FSCTL_QUERY_ALLOCATED_RANGES
Signed-off-by: Ronnie Sahlberg <lsahlber@redhat.com>
Signed-off-by: Steve French <stfrench@microsoft.com>

To support compounding, __smb_send_rqst() now sends an array of requests to
the transport layer.
Change smbd_send() to take an array of requests, and send them in as few
packets as possible.
Signed-off-by: Long Li <longli@microsoft.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
CC: Stable <stable@vger.kernel.org>

DesiredAccess field in SMB3 open request needs
to be set differently for READ vs. WRITE ioctls
(not just ones that request both).

Originally noticed by Pavel
Signed-off-by: Steve French <stfrench@microsoft.com>
Reviewed-by: Ronnie Sahlberg <lsahlber@redhat.com>

Add support to pass a blob to the server in FSCTL passthrough.
Signed-off-by: Ronnie Sahlberg <lsahlber@redhat.com>
Signed-off-by: Steve French <stfrench@microsoft.com>

Originally, filemap_write_and_wait took the i_mutex internally, but
commit 02c24a82 pushed the mutex acquisition into the individual
fsync routines, leaving it up to the subsystem maintainers to remove
it if it wasn't needed.

For cifs, I see no reason to take the inode_lock here. All of the
operations inside that lock are protected in other ways.
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
Acked-by: Pavel Shilovsky <pshilov@microsoft.com>

When transport is being destroyed, it's possible that some processes may
hold memory registrations that need to be deregistred.

Call them first so nobody is using transport resources, and it can be
destroyed.
Signed-off-by: Long Li <longli@microsoft.com>
Signed-off-by: Steve French <stfrench@microsoft.com>

Memory registration failure doesn't mean this I/O has failed, it means the
transport is hitting I/O error or needs reconnect. This error is not from
the server.

Indicate this error to upper layer, and let upper layer decide how to
reconnect and proceed with this I/O.
Signed-off-by: Long Li <longli@microsoft.com>
Signed-off-by: Steve French <stfrench@microsoft.com>

Failure to send a packet doesn't mean it's a permanent failure, it can't be
returned to user process. This I/O should be retried or failed based on
server packet response and transport health. This logic is handled by the
upper layer.

Give this decision to upper layer.
Signed-off-by: Long Li <longli@microsoft.com>
Signed-off-by: Steve French <stfrench@microsoft.com>

When packets are waiting for outbound I/O and interrupted, return the
proper error code to user process.
Signed-off-by: Long Li <longli@microsoft.com>
Signed-off-by: Steve French <stfrench@microsoft.com>

Now upper layer is handling the transport shutdown and reconnect, remove
the code that handling transport shutdown on RDMA disconnect.
Signed-off-by: Long Li <longli@microsoft.com>
Signed-off-by: Steve French <stfrench@microsoft.com>

On transport recoonect, upper layer CIFS code destroys the current
transport and then recoonect. This code path is not used by SMBD, in that
SMBD destroys its transport on RDMA disconnect notification independent of
CIFS upper layer behavior.

This approach adds some costs to SMBD layer to handle transport shutdown
and restart, and to deal with several racing conditions on reconnecting
transport.

Re-work this code path by introducing a new smbd_destroy. This function is
called form upper layer to ask SMBD to destroy the transport. SMBD will no
longer need to destroy the transport by itself while worrying about data
transfer is in progress. The upper layer guarantees the transport is
locked.

change log:
v2: fix build errors when CONFIG_CIFS_SMB_DIRECT is not configured
Signed-off-by: Long Li <longli@microsoft.com>
Signed-off-by: Steve French <stfrench@microsoft.com>

Trivial update to comment suggested by Pavel.
Signed-off-by: Steve French <stfrench@microsoft.com>

if we mount A then mount A again with nodfs, we shouldn't reuse the
superblock. document the purpose of the defines as well.

there are most likely more flags that needs to be added to this mask,
in fact the logic to find them should be which flag should
be *ignored* when trying to reuse an existing sb.
Signed-off-by: Aurelien Aptel <aaptel@suse.com>
Signed-off-by: Steve French <stfrench@microsoft.com>

Missing parameter that should be displayed in the mount list
Reviewed-by: Ronnie Sahlberg <lsahlber@redhat.com>
Signed-off-by: Kenneth D'souza <kdsouza@redhat.com>
Signed-off-by: Steve French <stfrench@microsoft.com>

As per MS-DFSC, when a DFS cache entry is expired and it is a DFS
link, then a new DFS referral must be sent to root server in order to
refresh the expired entry.

This patch ensures that all new DFS referrals for refreshing the cache
are sent to DFS root.
Signed-off-by: Paulo Alcantara (SUSE) <paulo@paulo.ac>
Signed-off-by: Steve French <stfrench@microsoft.com>

A trivial patch.

cpu_to_le32() is capable enough to detect __builtin_constant_p()
and to use an appropriate compile time ___constant_swahb32()
function.

So we can use cpu_to_le32() instead of __constant_cpu_to_le32().
Signed-off-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Signed-off-by: Steve French <stfrench@microsoft.com>

Also track minimum and maximum time by command in /proc/fs/cifs/Stats
Signed-off-by: Steve French <stfrench@microsoft.com>

Pull parisc updates from Helge Deller:
 "Many great new features, fixes and optimizations, including:

   - Convert page table updates to use per-pagetable spinlocks which
     overall improves performance on SMP machines a lot, by Mikulas
     Patocka

   - Kernel debugger (KGDB) support, by Sven Schnelle

   - KPROBES support, by Sven Schnelle

   - Lots of TLB lock/flush improvements, by Dave Anglin

   - Drop DISCONTIGMEM and switch to SPARSEMEM

   - Added JUMP_LABEL, branch runtime-patching support

   - Lots of other small speedups and cleanups, e.g. for QEMU, stack
     randomization, avoidance of name clashes, documentation updates,
     etc ..."

* 'parisc-5.2-1' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux: (28 commits)
  parisc: Add static branch and JUMP_LABEL feature
  parisc: Use PA_ASM_LEVEL in boot code
  parisc: Rename LEVEL to PA_ASM_LEVEL to avoid name clash with DRBD code
  parisc: Update huge TLB page support to use per-pagetable spinlock
  parisc: Use per-pagetable spinlock
  parisc: Allow live-patching of __meminit functions
  parisc: Add memory barrier to asm pdc and sync instructions
  parisc: Add memory clobber to TLB purges
  parisc: Use ldcw instruction for SMP spinlock release barrier
  parisc: Remove lock code to serialize TLB operations in pacache.S
  parisc: Switch from DISCONTIGMEM to SPARSEMEM
  parisc: enable wide mode early
  parisc: update feature lists
  parisc: Show n/a if product number not available
  parisc: remove unused flags parameter in __patch_text()
  doc: update kprobes supported architecture list
  parisc: Implement kretprobes
  parisc: remove kprobes.h from generic-y
  parisc: Implement kprobes
  parisc: add functions required by KPROBE_EVENTS
  ...

Pull audit updates from Paul Moore:
 "We've got a reasonably broad set of audit patches for the v5.2 merge
  window, the highlights are below:

   - The biggest change, and the source of all the arch/* changes, is
     the patchset from Dmitry to help enable some of the work he is
     doing around PTRACE_GET_SYSCALL_INFO.

     To be honest, including this in the audit tree is a bit of a
     stretch, but it does help move audit a little further along towards
     proper syscall auditing for all arches, and everyone else seemed to
     agree that audit was a "good" spot for this to land (or maybe they
     just didn't want to merge it? dunno.).

   - We can now audit time/NTP adjustments.

   - We continue the work to connect associated audit records into a
     single event"

* tag 'audit-pr-20190507' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/audit: (21 commits)
  audit: fix a memory leak bug
  ntp: Audit NTP parameters adjustment
  timekeeping: Audit clock adjustments
  audit: purge unnecessary list_empty calls
  audit: link integrity evm_write_xattrs record to syscall event
  syscall_get_arch: add "struct task_struct *" argument
  unicore32: define syscall_get_arch()
  Move EM_UNICORE to uapi/linux/elf-em.h
  nios2: define syscall_get_arch()
  nds32: define syscall_get_arch()
  Move EM_NDS32 to uapi/linux/elf-em.h
  m68k: define syscall_get_arch()
  hexagon: define syscall_get_arch()
  Move EM_HEXAGON to uapi/linux/elf-em.h
  h8300: define syscall_get_arch()
  c6x: define syscall_get_arch()
  arc: define syscall_get_arch()
  Move EM_ARCOMPACT and EM_ARCV2 to uapi/linux/elf-em.h
  audit: Make audit_log_cap and audit_copy_inode static
  audit: connect LOGIN record to its syscall record
  ...

Pull selinux updates from Paul Moore:
 "We've got a few SELinux patches for the v5.2 merge window, the
  highlights are below:

   - Add LSM hooks, and the SELinux implementation, for proper labeling
     of kernfs. While we are only including the SELinux implementation
     here, the rest of the LSM folks have given the hooks a thumbs-up.

   - Update the SELinux mdp (Make Dummy Policy) script to actually work
     on a modern system.

   - Disallow userspace to change the LSM credentials via
     /proc/self/attr when the task's credentials are already overridden.

     The change was made in procfs because all the LSM folks agreed this
     was the Right Thing To Do and duplicating it across each LSM was
     going to be annoying"

* tag 'selinux-pr-20190507' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/selinux:
  proc: prevent changes to overridden credentials
  selinux: Check address length before reading address family
  kernfs: fix xattr name handling in LSM helpers
  MAINTAINERS: update SELinux file patterns
  selinux: avoid uninitialized variable warning
  selinux: remove useless assignments
  LSM: lsm_hooks.h - fix missing colon in docstring
  selinux: Make selinux_kernfs_init_security static
  kernfs: initialize security of newly created nodes
  selinux: implement the kernfs_init_security hook
  LSM: add new hook for kernfs node initialization
  kernfs: use simple_xattrs for security attributes
  selinux: try security xattr after genfs for kernfs filesystems
  kernfs: do not alloc iattrs in kernfs_xattr_get
  kernfs: clean up struct kernfs_iattrs
  scripts/selinux: fix build
  selinux: use kernel linux/socket.h for genheaders and mdp
  scripts/selinux: modernize mdp

Pull swiotlb updates from Konrad Rzeszutek Wilk:
 "Cleanups in the swiotlb code and extra debugfs knobs to help with the
  field diagnostics"

* 'stable/for-linus-5.2' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/swiotlb:
  swiotlb-xen: ensure we have a single callsite for xen_dma_map_page
  swiotlb-xen: simplify the DMA sync method implementations
  swiotlb-xen: use ->map_page to implement ->map_sg
  swiotlb-xen: make instances match their method names
  swiotlb: save io_tlb_used to local variable before leaving critical section
  swiotlb: dump used and total slots when swiotlb buffer is full

Pull libata updates from Jens Axboe:
 "Just two minor fixes queued up for 5.2, adding support for two
  different platforms to ahci"

* tag 'for-5.2/libata-20190507' of git://git.kernel.dk/linux-block:
  ahci: qoriq: add ls1028a platforms support
  ahci: qoriq: add lx2160 platforms support

Pull io_uring updates from Jens Axboe:
 "Set of changes/improvements for io_uring. This contains:

   - Fix of a shadowed variable (Colin)

   - Add support for draining commands (me)

   - Add support for sync_file_range() (me)

   - Add eventfd support (me)

   - cpu_online() fix (Shenghui)

   - Removal of a redundant ->error assignment (Stefan)"

* tag 'for-5.2/io_uring-20190507' of git://git.kernel.dk/linux-block:
  io_uring: use cpu_online() to check p->sq_thread_cpu instead of cpu_possible()
  io_uring: fix shadowed variable ret return code being not checked
  req->error only used for iopoll
  io_uring: add support for eventfd notifications
  io_uring: add support for IORING_OP_SYNC_FILE_RANGE
  fs: add sync_file_range() helper
  io_uring: add support for marking commands as draining

Pull block updates from Jens Axboe:
 "Nothing major in this series, just fixes and improvements all over the
  map. This contains:

   - Series of fixes for sed-opal (David, Jonas)

   - Fixes and performance tweaks for BFQ (via Paolo)

   - Set of fixes for bcache (via Coly)

   - Set of fixes for md (via Song)

   - Enabling multi-page for passthrough requests (Ming)

   - Queue release fix series (Ming)

   - Device notification improvements (Martin)

   - Propagate underlying device rotational status in loop (Holger)

   - Removal of mtip32xx trim support, which has been disabled for years
     (Christoph)

   - Improvement and cleanup of nvme command handling (Christoph)

   - Add block SPDX tags (Christoph)

   - Cleanup/hardening of bio/bvec iteration (Christoph)

   - A few NVMe pull requests (Christoph)

   - Removal of CONFIG_LBDAF (Christoph)

   - Various little fixes here and there"

* tag 'for-5.2/block-20190507' of git://git.kernel.dk/linux-block: (164 commits)
  block: fix mismerge in bvec_advance
  block: don't drain in-progress dispatch in blk_cleanup_queue()
  blk-mq: move cancel of hctx->run_work into blk_mq_hw_sysfs_release
  blk-mq: always free hctx after request queue is freed
  blk-mq: split blk_mq_alloc_and_init_hctx into two parts
  blk-mq: free hw queue's resource in hctx's release handler
  blk-mq: move cancel of requeue_work into blk_mq_release
  blk-mq: grab .q_usage_counter when queuing request from plug code path
  block: fix function name in comment
  nvmet: protect discovery change log event list iteration
  nvme: mark nvme_core_init and nvme_core_exit static
  nvme: move command size checks to the core
  nvme-fabrics: check more command sizes
  nvme-pci: check more command sizes
  nvme-pci: remove an unneeded variable initialization
  nvme-pci: unquiesce admin queue on shutdown
  nvme-pci: shutdown on timeout during deletion
  nvme-pci: fix psdt field for single segment sgls
  nvme-multipath: don't print ANA group state by default
  nvme-multipath: split bios with the ns_head bio_set before submitting
  ...

Merge tag 'leds-for-5.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/j.anaszewski/linux-leds

Pull LED updates from Jacek Anaszewski:
 "LED core fixes and improvements:

      - avoid races with workqueue
      - Kconfig: pedantic cleanup
      - small fixes for Flash class description

  leds-lt3593:

      - remove unneeded assignment in lt3593_led_probe
      - drop pdata handling code

  leds-blinkm:

      - clean up double assignment to data->i2c_addr

  leds-pca955x, leds-pca963x:

      - revert ACPI support, as it turned out that there is no evidence
          of officially registered ACPI IDs for these devices.
      - make use of device property API

  leds-as3645a:

      - switch to fwnode property API

  LED related addition to ACPI documentation:

      - document how to refer to LEDs from remote nodes

  LED related fix to ALSA line6/toneport driver:

      - avoid polluting led_* namespace

  And lm3532 driver relocation from MFD to LED subsystem, accompanied by
  various improvements and optimizations; it entails also a change in
  omap4-droid4-xt894.dts:

      - leds: lm3532: Introduce the lm3532 LED driver
      - mfd: ti-lmu: Remove LM3532 backlight driver references
      - ARM: dts: omap4-droid4: Update backlight dt properties
      - dt: lm3532: Add lm3532 dt doc and update ti_lmu doc"

* tag 'leds-for-5.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/j.anaszewski/linux-leds:
  leds: avoid races with workqueue
  ALSA: line6: Avoid polluting led_* namespace
  leds: lm3532: Introduce the lm3532 LED driver
  mfd: ti-lmu: Remove LM3532 backlight driver references
  ARM: dts: omap4-droid4: Update backlight dt properties
  dt: lm3532: Add lm3532 dt doc and update ti_lmu doc
  leds: Small fixes for Flash class description
  leds: blinkm: clean up double assignment to data->i2c_addr
  leds: pca963x: Make use of device property API
  leds: pca955x: Make use of device property API
  leds: lt3593: Remove unneeded assignment in lt3593_led_probe
  leds: lt3593: drop pdata handling code
  leds: pca955x: Revert "Add ACPI support"
  leds: pca963x: Revert "Add ACPI support"
  drivers: leds: Kconfig: pedantic cleanups
  ACPI: Document how to refer to LEDs from remote nodes
  leds: as3645a: Switch to fwnode property API

Merge tag 'char-misc-5.2-rc1-part2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc

Pull char/misc update part 2 from Greg KH:
 "Here is the "real" big set of char/misc driver patches for 5.2-rc1

  Loads of different driver subsystem stuff in here, all over the places:
   - thunderbolt driver updates
   - habanalabs driver updates
   - nvmem driver updates
   - extcon driver updates
   - intel_th driver updates
   - mei driver updates
   - coresight driver updates
   - soundwire driver cleanups and updates
   - fastrpc driver updates
   - other minor driver updates
   - chardev minor fixups

  Feels like this tree is getting to be a dumping ground of "small
  driver subsystems" these days. Which is fine with me, if it makes
  things easier for those subsystem maintainers.

  All of these have been in linux-next for a while with no reported
  issues"

* tag 'char-misc-5.2-rc1-part2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (255 commits)
  intel_th: msu: Add current window tracking
  intel_th: msu: Add a sysfs attribute to trigger window switch
  intel_th: msu: Correct the block wrap detection
  intel_th: Add switch triggering support
  intel_th: gth: Factor out trace start/stop
  intel_th: msu: Factor out pipeline draining
  intel_th: msu: Switch over to scatterlist
  intel_th: msu: Replace open-coded list_{first,last,next}_entry variants
  intel_th: Only report useful IRQs to subdevices
  intel_th: msu: Start handling IRQs
  intel_th: pci: Use MSI interrupt signalling
  intel_th: Communicate IRQ via resource
  intel_th: Add "rtit" source device
  intel_th: Skip subdevices if their MMIO is missing
  intel_th: Rework resource passing between glue layers and core
  intel_th: SPDX-ify the documentation
  intel_th: msu: Fix single mode with IOMMU
  coresight: funnel: Support static funnel
  dt-bindings: arm: coresight: Unify funnel DT binding
  coresight: replicator: Add new device id for static replicator
  ...

Merge tag 'char-misc-5.2-rc1-part1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc

Pull char/misc update part 1 from Greg KH:
 "This contains only a small number of bugfixes that would have gone to
  you for 5.1-rc8 if that had happened, but instead I let them sit in
  linux-next for an extra week just "to be sure".

  The "big" patch here is for hyper-v, fixing a bug in their sysfs files
  that could cause big problems. The others are all small fixes,
  resolving reported issues that showed up in 5.1-rcs, plus some odd
  'static' cleanups for the phy drivers that really should have waited
  for -rc1. Most of these are tagged for the stable trees, so 5.1 will
  pick them up.

  All of these have been in linux-next for a while, with no reported
  issues"

* tag 'char-misc-5.2-rc1-part1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc:
  misc: rtsx: Fixed rts5260 power saving parameter and sd glitch
  binder: take read mode of mmap_sem in binder_alloc_free_page()
  intel_th: pci: Add Comet Lake support
  stm class: Fix channel bitmap on 32-bit systems
  stm class: Fix channel free in stm output free path
  phy: sun4i-usb: Make sure to disable PHY0 passby for peripheral mode
  phy: fix platform_no_drv_owner.cocci warnings
  phy: mapphone-mdm6600: add gpiolib dependency
  phy: ti: usb2: fix OMAP_CONTROL_PHY dependency
  phy: allwinner: allow compile testing
  phy: qcom-ufs: Make ufs_qcom_phy_disable_iface_clk static
  phy: rockchip-typec: Make usb3_pll_cfg and dp_pll_cfg static
  phy: phy-twl4030-usb: Fix cable state handling
  Drivers: hv: vmbus: Remove the undesired put_cpu_ptr() in hv_synic_cleanup()
  Drivers: hv: vmbus: Fix race condition with new ring_buffer_info mutex
  Drivers: hv: vmbus: Set ring_info field to 0 and remove memset
  Drivers: hv: vmbus: Refactor chan->state if statement
  Drivers: hv: vmbus: Expose monitor data only when monitor pages are used

Pull staging / IIO driver updates from Greg KH:
 "Here is the big staging and iio driver update for 5.2-rc1.

  Lots of tiny fixes all over the staging and IIO driver trees here,
  along with some new IIO drivers.

  The "counter" subsystem was added in here as well, as it is needed by
  the IIO drivers and subsystem.

  Also we ended up deleting two drivers, making this pull request remove
  a few hundred thousand lines of code, always a nice thing to see. Both
  of the drivers removed have been replaced with "real" drivers in their
  various subsystem directories, and they will be coming to you from
  those locations during this merge window.

  There are some core vt/selection changes in here, that was due to some
  cleanups needed for the speakup fixes. Those have all been acked by
  the various subsystem maintainers (i.e. me), so those are ok.

  We also added a few new drivers, for some odd hardware, giving new
  developers plenty to work on with basic coding style cleanups to come
  in the near future.

  Other than that, nothing unusual here.

  All of these have been in linux-next for a while with no reported
  issues, other than an odd gcc warning for one of the new drivers that
  should be fixed up soon"

[ I fixed up the warning myself  - Linus ]

* tag 'staging-5.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: (663 commits)
  staging: kpc2000: kpc_spi: Fix build error for {read,write}q
  Staging: rtl8192e: Remove extra space before break statement
  Staging: rtl8192u: ieee80211: Fix if-else indentation warning
  Staging: rtl8192u: ieee80211: Fix indentation errors by removing extra spaces
  staging: most: cdev: fix chrdev_region leak in mod_exit
  staging: wlan-ng: Fix improper SPDX comment style
  staging: rtl8192u: ieee80211: Resolve ERROR reported by checkpatch
  staging: vc04_services: bcm2835-camera: Compress two lines into one line
  staging: rtl8723bs: core: Use !x in place of NULL comparison.
  staging: rtl8723bs: core: Prefer using the BIT Macro.
  staging: fieldbus: anybus-s: fix wait_for_completion_timeout return handling
  staging: kpc2000: fix up build problems with readq()
  staging: rtlwifi: move remaining phydm .h files
  staging: rtlwifi: strip down phydm .h files
  staging: rtlwifi: delete the staging driver
  staging: fieldbus: anybus-s: rename bus id field to avoid confusion
  staging: fieldbus: anybus-s: keep device bus id in bus endianness
  Staging: sm750fb: Change *array into *const array
  staging: rtl8192u: ieee80211: Fix spelling mistake
  staging: rtl8192u: ieee80211: Replace bit shifting with BIT macro
  ...

Pull driver core/kobject updates from Greg KH:
 "Here is the "big" set of driver core patches for 5.2-rc1

  There are a number of ACPI patches in here as well, as Rafael said
  they should go through this tree due to the driver core changes they
  required. They have all been acked by the ACPI developers.

  There are also a number of small subsystem-specific changes in here,
  due to some changes to the kobject core code. Those too have all been
  acked by the various subsystem maintainers.

  As for content, it's pretty boring outside of the ACPI changes:
   - spdx cleanups
   - kobject documentation updates
   - default attribute groups for kobjects
   - other minor kobject/driver core fixes

  All have been in linux-next for a while with no reported issues"

* tag 'driver-core-5.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (47 commits)
  kobject: clean up the kobject add documentation a bit more
  kobject: Fix kernel-doc comment first line
  kobject: Remove docstring reference to kset
  firmware_loader: Fix a typo ("syfs" -> "sysfs")
  kobject: fix dereference before null check on kobj
  Revert "driver core: platform: Fix the usage of platform device name(pdev->name)"
  init/config: Do not select BUILD_BIN2C for IKCONFIG
  Provide in-kernel headers to make extending kernel easier
  kobject: Improve doc clarity kobject_init_and_add()
  kobject: Improve docs for kobject_add/del
  driver core: platform: Fix the usage of platform device name(pdev->name)
  livepatch: Replace klp_ktype_patch's default_attrs with groups
  cpufreq: schedutil: Replace default_attrs field with groups
  padata: Replace padata_attr_type default_attrs field with groups
  irqdesc: Replace irq_kobj_type's default_attrs field with groups
  net-sysfs: Replace ktype default_attrs field with groups
  block: Replace all ktype default_attrs with groups
  samples/kobject: Replace foo_ktype's default_attrs field with groups
  kobject: Add support for default attribute groups to kobj_type
  driver core: Postpone DMA tear-down until after devres release for probe failure
  ...

Pull MMC updates from Ulf Hansson:
 "MMC core:
   - Fix a few memoryleaks
   - Minor improvements to the card initialization sequence
   - Partially support sleepy GPIO controllers for pwrseq eMMC

  MMC host:
   - alcor: Work with multiple-entry sglists
   - alcor: Enable DMA for writes
   - meson-gx: Improve tuning support
   - meson-gx: Avoid clock glitch when switching to DDR modes
   - meson-gx: Disable unreliable HS400 mode
   - mmci: Minor updates for support of HW busy detection
   - mmci: Support data transfers for the stm32_sdmmc variant
   - mmci: Restructure code to better support different variants
   - mtk-sd: Add support for version found on MT7620 family SOCs
   - mtk-sd: Add support for the MT8516 version
   - mtk-sd: Add Chaotian Jing as the maintainer
   - sdhci: Reorganize request-code to convert from tasklet to workqueue
   - sdhci_am654: Stabilize support for lower speed modes
   - sdhci-esdhc-imx: Add HS400 support for iMX7ULP
   - sdhci-esdhc-imx: Add support for iMX7ULP version
   - sdhci-of-arasan: Allow to disable DCMDs via DT for CQE
   - sdhci-of-esdhc: Add support for the ls1028a version
   - sdhci-of-esdhc: Several fixups for errata
   - sdhci-pci: Fix BYT OCP setting
   - sdhci-pci: Add support for Intel CML
   - sdhci-tegra: Add support for system suspend/resume
   - sdhci-tegra: Add CQE support for Tegra186 WAR
   - sdhci-tegra: Add support for Tegra194
   - sdhci-tegra: Update HW tuning process

  MEMSTICK:
   - I volunteered to help as a maintainer for the memstick subsystem,
     which is reflected by an update to the MAINTAINERS file. Changes
     are funneled through my MMC git and we will use the linux-mmc
     mailing list.

  MEMSTICK host:
   - A few minor cleanups"

* tag 'mmc-v5.2' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc: (87 commits)
  mmc: sdhci-pci: Fix BYT OCP setting
  dt-bindings: mmc: add DT bindings for ls1028a eSDHC host controller
  mmc: alcor: Drop pointer to mmc_host from alcor_sdmmc_host
  mmc: mtk-sd: select REGULATOR
  mmc: mtk-sd: enable internal card-detect logic.
  mmc: mtk-sd: add support for config found in mt7620 family SOCs.
  mmc: mtk-sd: don't hard-code interrupt trigger type
  mmc: core: Fix tag set memory leak
  dt-bindings: mmc: Add support for MT8516 to mtk-sd
  mmc: mmci: Prevent polling for busy detection in IRQ context
  mmc: mmci: Cleanup mmci_cmd_irq() for busy detect
  mmc: usdhi6rol0: mark expected switch fall-throughs
  mmc: core: Verify SD bus width
  mmc: sdhci-esdhc-imx: Add HS400 support for iMX7ULP
  mmc: sdhci-esdhc-imx: add pm_qos to interact with cpuidle
  dt-bindings: mmc: fsl-imx-esdhc: add imx7ulp compatible string
  mmc: meson-gx: add signal resampling tuning
  mmc: meson-gx: remove Rx phase tuning
  mmc: meson-gx: avoid clock glitch when switching to DDR modes
  mmc: meson-gx: disable HS400
  ...

Merge tag 'Wimplicit-fallthrough-5.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gustavoars/linux

Pull Wimplicit-fallthrough updates from Gustavo A. R. Silva:
 "Mark switch cases where we are expecting to fall through.

  This is part of the ongoing efforts to enable -Wimplicit-fallthrough.

  Most of them have been baking in linux-next for a whole development
  cycle. And with Stephen Rothwell's help, we've had linux-next
  nag-emails going out for newly introduced code that triggers
  -Wimplicit-fallthrough to avoid gaining more of these cases while we
  work to remove the ones that are already present.

  We are getting close to completing this work. Currently, there are
  only 32 of 2311 of these cases left to be addressed in linux-next. I'm
  auditing every case; I take a look into the code and analyze it in
  order to determine if I'm dealing with an actual bug or a false
  positive, as explained here:

      https://lore.kernel.org/lkml/c2fad584-1705-a5f2-d63c-824e9b96cf50@embeddedor.com/

  While working on this, I've found and fixed the several missing
  break/return bugs, some of them introduced more than 5 years ago.

  Once this work is finished, we'll be able to universally enable
  "-Wimplicit-fallthrough" to avoid any of these kinds of bugs from
  entering the kernel again"

* tag 'Wimplicit-fallthrough-5.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gustavoars/linux: (27 commits)
  memstick: mark expected switch fall-throughs
  drm/nouveau/nvkm: mark expected switch fall-throughs
  NFC: st21nfca: Fix fall-through warnings
  NFC: pn533: mark expected switch fall-throughs
  block: Mark expected switch fall-throughs
  ASN.1: mark expected switch fall-through
  lib/cmdline.c: mark expected switch fall-throughs
  lib: zstd: Mark expected switch fall-throughs
  scsi: sym53c8xx_2: sym_nvram: Mark expected switch fall-through
  scsi: sym53c8xx_2: sym_hipd: mark expected switch fall-throughs
  scsi: ppa: mark expected switch fall-through
  scsi: osst: mark expected switch fall-throughs
  scsi: lpfc: lpfc_scsi: Mark expected switch fall-throughs
  scsi: lpfc: lpfc_nvme: Mark expected switch fall-through
  scsi: lpfc: lpfc_nportdisc: Mark expected switch fall-through
  scsi: lpfc: lpfc_hbadisc: Mark expected switch fall-throughs
  scsi: lpfc: lpfc_els: Mark expected switch fall-throughs
  scsi: lpfc: lpfc_ct: Mark expected switch fall-throughs
  scsi: imm: mark expected switch fall-throughs
  scsi: csiostor: csio_wr: mark expected switch fall-through
  ...

Pull compiler-based variable initialization updates from Kees Cook:
 "This is effectively part of my gcc-plugins tree, but as this adds some
  Clang support, it felt weird to still call it "gcc-plugins". :)

  This consolidates Kconfig for the existing stack variable
  initialization (via structleak and stackleak gcc plugins) and adds
  Alexander Potapenko's support for Clang's new similar functionality.

  Summary:

   - Consolidate memory initialization Kconfigs (Kees)

   - Implement support for Clang's stack variable auto-init (Alexander)"

* tag 'meminit-v5.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux:
  security: Implement Clang's stack initialization
  security: Move stackleak config to Kconfig.hardening
  security: Create "kernel hardening" config area

Pull pidfd updates from Christian Brauner:
 "This patchset makes it possible to retrieve pidfds at process creation
  time by introducing the new flag CLONE_PIDFD to the clone() system
  call. Linus originally suggested to implement this as a new flag to
  clone() instead of making it a separate system call.

  After a thorough review from Oleg CLONE_PIDFD returns pidfds in the
  parent_tidptr argument. This means we can give back the associated pid
  and the pidfd at the same time. Access to process metadata information
  thus becomes rather trivial.

  As has been agreed, CLONE_PIDFD creates file descriptors based on
  anonymous inodes similar to the new mount api. They are made
  unconditional by this patchset as they are now needed by core kernel
  code (vfs, pidfd) even more than they already were before (timerfd,
  signalfd, io_uring, epoll etc.). The core patchset is rather small.
  The bulky looking changelist is caused by David's very simple changes
  to Kconfig to make anon inodes unconditional.

  A pidfd comes with additional information in fdinfo if the kernel
  supports procfs. The fdinfo file contains the pid of the process in
  the callers pid namespace in the same format as the procfs status
  file, i.e. "Pid:\t%d".

  To remove worries about missing metadata access this patchset comes
  with a sample/test program that illustrates how a combination of
  CLONE_PIDFD and pidfd_send_signal() can be used to gain race-free
  access to process metadata through /proc/<pid>.

  Further work based on this patchset has been done by Joel. His work
  makes pidfds pollable. It finished too late for this merge window. I
  would prefer to have it sitting in linux-next for a while and send it
  for inclusion during the 5.3 merge window"

* tag 'pidfd-v5.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/brauner/linux:
  samples: show race-free pidfd metadata access
  signal: support CLONE_PIDFD with pidfd_send_signal
  clone: add CLONE_PIDFD
  Make anon_inodes unconditional

Pull stream_open conversion from Kirill Smelkov:

 - remove unnecessary double nonseekable_open from drivers/char/dtlk.c
   as noticed by Pavel Machek while reviewing nonseekable_open ->
   stream_open mass conversion.

 - the mass conversion patch promised in commit 10dce8af ("fs:
   stream_open - opener for stream-like files so that read and write can
   run simultaneously without deadlock") and is automatically generated
   by running

        $ make coccicheck MODE=patch COCCI=scripts/coccinelle/api/stream_open.cocci

   I've verified each generated change manually - that it is correct to
   convert - and each other nonseekable_open instance left - that it is
   either not correct to convert there, or that it is not converted due
   to current stream_open.cocci limitations. More details on this in the
   patch.

 - finally, change VFS to pass ppos=NULL into .read/.write for files
   that declare themselves streams. It was suggested by Rasmus Villemoes
   and makes sure that if ppos starts to be erroneously used in a stream
   file, such bug won't go unnoticed and will produce an oops instead of
   creating illusion of position change being taken into account.

   Note: this patch does not conflict with "fuse: Add FOPEN_STREAM to
   use stream_open()" that will be hopefully coming via FUSE tree,
   because fs/fuse/ uses new-style .read_iter/.write_iter, and for these
   accessors position is still passed as non-pointer kiocb.ki_pos .

* tag 'stream_open-5.2' of https://lab.nexedi.com/kirr/linux:
  vfs: pass ppos=NULL to .read()/.write() of FMODE_STREAM files
  *: convert stream-like files from nonseekable_open -> stream_open
  dtlk: remove double call to nonseekable_open