Instead of assuming that host is powered on only once at card insertion, allow
for the possibility that memstick layer may need to cycle card's power to get
it out from some unhealthy states.
Signed-off-by: Alex Dubov <oakad@yahoo.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Additional input received from JMicron on MemoryStick host interfaces showed
that some assumtions in fifo handling code were incorrect.  This patch also
fixes data corruption used to occure during PIO transfers.
Signed-off-by: Alex Dubov <oakad@yahoo.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Signed-off-by: Alex Dubov <oakad@yahoo.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Signed-off-by: Alex Dubov <oakad@yahoo.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Bus driver may need to be informed that host is being suspended/resumed.
Signed-off-by: Alex Dubov <oakad@yahoo.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Thanks to some input from kind people at JMicron it is now possible to have
more correct definitions of protocol structures and bit field semantics.
Signed-off-by: Alex Dubov <oakad@yahoo.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Fix memory size multiplier during detection.
Signed-off-by: Krzysztof Helt <krzysztof.h1@wp.pl>
Cc: "Antonino A. Daplas" <adaplas@pol.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Remove locking registers after they are unlocked during switch to/from MMIO
mode.  This fixes regression on the Blade3D (Trident 9880) caused by the
previous patch (probe fixes).
Signed-off-by: Krzysztof Helt <krzysztof.h1@wp.pl>
Cc: "Antonino A. Daplas" <adaplas@pol.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Fix the following section mismatches:

WARNING: drivers/built-in.o(.exit.text+0x5a): Section mismatch in reference from the function of_platform_serial_exit() to the variable .devinit.data:of_platform_serial_driver
The function __exit of_platform_serial_exit() references
a variable __devinitdata of_platform_serial_driver.
Signed-off-by: Josh Boyer <jwboyer@linux.vnet.ibm.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mackerras <paulus@samba.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

This macro is used to define tables, not to declare them.

Cc: Greg KH <greg@kroah.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

This has been around for a while but nobody reported it until recently.
Resubmitting the fix as it's appropriate for 2.6.25
Signed-off-by: Alan Cox <alan@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Don't include linux/backing-dev.h twice in mm/filemap.c, it's pointless.
Signed-off-by: Jesper Juhl <jesper.juhl@gmail.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

* git://git.kernel.org/pub/scm/linux/kernel/git/tglx/linux-2.6-hrt:
  time: remove obsolete CLOCK_TICK_ADJUST
  time: don't touch an offlined CPU's ts->tick_stopped in tick_cancel_sched_timer()
  time: prevent the loop in timespec_add_ns() from being optimised away
  ntp: use unsigned input for do_div()

* git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6:
  [CRYPTO] skcipher: Fix section mismatches

This fixes a boot panic due to a typo in the recent iommu patchset from
FUJITA Tomonori <tomof@acm.org> - the code used dma_get_max_seg_size()
instead of dma_get_seg_boundary().

It also removes a couple of unnecessary BUG_ON() and ALIGN() macros.
Signed-off-by: Ivan Kokshaysky <ink@jurassic.park.msu.ru>
Reported-and-tested-by: Bob Tracy <rct@frus.com>
Acked-by: FUJITA Tomonori <tomof@acm.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

We currently set the root-domain online span automatically when the
domain is added to the cpu if the cpu is already a member of
cpu_online_map.

This was done as a hack/bug-fix for s2ram, but it also causes a problem
with hotplug CPU_DOWN transitioning.  The right way to fix the original
problem is to actually respond to CPU_UP events, instead of CPU_ONLINE,
which is already too late.

This solves the hung reboot regression reported by Andrew Morton and
others.
Signed-off-by: Gregory Haskins <ghaskins@novell.com>
Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

The first version of the ntp_interval/tick_length inconsistent usage patch was
recently merged as bbe4d18a

http://git.kernel.org/gitweb.cgi?p=linux/kernel/git/torvalds/linux-2.6.git;a=commit;h=bbe4d18ac2e058c56adb0cd71f49d9ed3216a405

While the fix did greatly improve the situation, it was correctly pointed out
by Roman that it does have a small bug: If the users change clocksources after
the system has been running and NTP has made corrections, the correctoins made
against the old clocksource will be applied against the new clocksource,
causing error.

The second attempt, which corrects the issue in the NTP_INTERVAL_LENGTH
definition has also made it up-stream as commit
e13a2e61

http://git.kernel.org/gitweb.cgi?p=linux/kernel/git/torvalds/linux-2.6.git;a=commit;h=e13a2e61dd5152f5499d2003470acf9c838eab84

Roman has correctly pointed out that CLOCK_TICK_ADJUST is calculated
based on the PIT's frequency, and isn't really relevant to non-PIT
driven clocksources (that is, clocksources other then jiffies and pit).

This patch reverts both of those changes, and simply removes
CLOCK_TICK_ADJUST.

This does remove the granularity error correction for users of PIT and Jiffies
clocksource users, but the granularity error but for the majority of users, it
should be within the 500ppm range NTP can accommodate for.

For systems that have granularity errors greater then 500ppm, the
"ntp_tick_adj=" boot option can be used to compensate.

[johnstul@us.ibm.com: provided changelog]
[mattilinnanvuori@yahoo.com: maek ntp_tick_adj static]
Signed-off-by: Roman Zippel <zippel@linux-m68k.org>
Acked-by: john stultz <johnstul@us.ibm.com>
Signed-off-by: Matti Linnanvuori <mattilinnanvuori@yahoo.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Cc: mingo@elte.hu
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>

Silences WARN_ONs in rcu_enter_nohz() and rcu_exit_nohz(), which appeared
before caused by (repeated) calls to:
        $ echo 0 > /sys/devices/system/cpu/cpu1/online
        $ echo 1 > /sys/devices/system/cpu/cpu1/online
Signed-off-by: Karsten Wiese <fzu@wemgehoertderstaat.de>
Cc: johnstul@us.ibm.com
Cc: Rafael Wysocki <rjw@sisk.pl>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Ingo Molnar <mingo@elte.hu>
Acked-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>

Since some architectures don't support __udivdi3().
Signed-off-by: Segher Boessenkool <segher@kernel.crashing.org>
Cc: john stultz <johnstul@us.ibm.com>
Cc: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>

The kernel NTP code shouldn't hand 64-bit *signed* values to do_div().  Make it
instead hand 64-bit unsigned values.  This gets rid of a couple of warnings.
Signed-off-by: David Howells <dhowells@redhat.com>
Cc: Roman Zippel <zippel@linux-m68k.org>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: john stultz <johnstul@us.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>

In commit ee7c82da ("wait_task_stopped:
simplify and fix races with SIGCONT/SIGKILL/untrace"), the magic (short)
cast when storing si_code was lost in wait_task_stopped.  This leaks the
in-kernel CLD_* values that do not match what userland expects.
Signed-off-by: Roland McGrath <roland@redhat.com>
Cc: Oleg Nesterov <oleg@tv-sign.ru>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

The previous patch to move chainiv and eseqiv into blkcipher created
a section mismatch for the chainiv exit function which was also called
from __init.  This patch removes the __exit marking on it.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

This makes 64-bit ptrace calls setting the 64-bit orig_ax field for a
32-bit task sign-extend the low 32 bits up to 64.  This matches what a
64-bit debugger expects when tracing a 32-bit task.

This follows on my "x86_64 ia32 syscall restart fix".  This didn't
matter until that was fixed.

The debugger ignores or zeros the high half of every register slot it
sets (including the orig_rax pseudo-register) uniformly.  It expects
that the setting of the low 32 bits always has the same meaning as a
32-bit debugger setting those same 32 bits with native 32-bit
facilities.

This never arose before because the syscall restart check never
matched any -ERESTART* values due to lack of sign extension.  Before
that fix, even 32-bit ptrace setting orig_eax to -1 failed to trigger
the restart check anyway.  So this was never noticed as a regression
of 64-bit debuggers vs 32-bit debuggers on the same 64-bit kernel.
Signed-off-by: Roland McGrath <roland@redhat.com>
[ Changed to just do the sign-extension unconditionally on x86-64,
  since orig_ax is always just a small integer and doesn't need
  the full 64-bit range ]
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

This adds another Broadcom BCM2045 based device to the blacklist, with
these settings the micro dongle works on my system.
Signed-off-by: Karsten Keil <kkeil@suse.de>
Acked-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

* 'slab-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/christoph/vm:
  slub: fix typo in Documentation/vm/slub.txt
  slab: NUMA slab allocator migration bugfix
  slub: Do not cross cacheline boundaries for very small objects
  slab - use angle brackets for include of kmalloc_sizes.h
  slab numa fallback logic: Do not pass unfiltered flags to page allocator
  slub statistics: Fix check for DEACTIVATE_REMOTE_FREES

* git://git.kernel.org/pub/scm/linux/kernel/git/bart/ide-2.6:
  ide: update references to Documentation/ide/ide.txt (v2)
  ide: move ide.txt to Documentation/ide/
  ide: fix buggy code in ide_register_hw()
  ide: fix enabling DMA on it821x in "smart" mode
  ide-cd: mark REQ_TYPE_ATA_PC write requests with REQ_RW flag

Fix all references to Documentation/ide/ide.txt.
Add/update ide/00-INDEX file.
Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

Cleanup some of Documentation directory:
Move Documentation/ide.txt to the ide/ sub-directory.
Fix trailing whitespace while there.
Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

Relocating the index to come after finding the hwif pointer.
Signed-off-by: Peter Teoh <htmldeveloper@gmail.com>
Reported-by: Adrian Bunk <bunk@kernel.org>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

ide_tune_dma() should return '1' if IDE_HFLAG_NO_SET_MODE host flag is set.

Cc: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

On Thursday 06 March 2008, walt wrote:

> For me, this commit causes the problem it's intended to fix:
> 
> commit 9f10d9ee
> Author: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
> Date:   Tue Feb 26 21:50:35 2008 +0100
> 
>      ide-cd: fix 'ireason' handling for REQ_TYPE_ATA_PC requests
> 
>      This fixes some hangs caused by not finishing the transfer before ending
>      the request and also makes use of 'ireason == 1' quirk for spurious IRQs.
> 
> When I mount a CD there is a long delay, and I see this error message:
> 
> hdc: ide_cd_check_ireason: wrong transfer direction!
> cdrom: failed setting lba address space
> hdc: status error: status=0x58 { DriveReady SeekComplete DataRequest }
> ide: failed opcode was: unknown
> hdc: drive not ready for command
> <repeated many times>
> 
> When I revert this commit everything works properly again, including
> CD burning.

It turned out that REQ_TYPE_ATA_PC write requests were not marked as such
(the previous commit assumed them to be).
Reported-by: walt <w41ter@gmail.com>
Tested-by: walt <w41ter@gmail.com>
Reviewed-by: Borislav Petkov <petkovbb@googlemail.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

* 'hotfixes' of git://git.linux-nfs.org/projects/trondmy/nfs-2.6:
  NFS: Fix dentry revalidation for NFSv4 referrals and mountpoint crossings
  NFS: Fix the fsid revalidation in nfs_update_inode()
  SUNRPC: Fix a nfs4 over rdma transport oops
  NFS: Fix an f_mode/f_flags confusion in fs/nfs/write.c

As long as the directory contents haven't changed, we should just let the
path walk proceed to cross the mountpoint. Apart from being an optimisation
in the case of 'nohide' mountpoint traversals, it also fixes an issue with
referrals: referral inodes don't have valid filehandles, so calling
nfs_revalidate_inode() on them is a bug.
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>

When we detect that we've crossed a mountpoint on the remote server, we
must take care not to use that inode to revalidate the fsid on our
current superblock. To do so, we label the inode as a remote mountpoint,
and check for that in nfs_update_inode().
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>

Prevent an RPC oops when freeing a dynamically allocated RDMA
buffer, used in certain special-case large metadata operations.
Signed-off-by: Tom Talpey <tmt@netapp.com>
Signed-off-by: James Lentini <jlentini@netapp.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>

O_SYNC is stored in filp->f_flags.
Thanks to Al Viro for pointing out the bug.
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>

The card state mutex was only initialized when a device was connected,
but used during unload unconditionally, leading to an Oops if a driver
was loaded and unloaded again without ever connecting a device.

Fix this by initializing the mutex as soon as the structure is allocated.
Also add a missing mutex unlock revealed in the same execution path.

This fixes a possible Oops in 2.6.25-rc that was introduced by commit
e468c048 ("Gigaset: permit module
unload").

Thanks to Roland Kletzing for reporting this problem.
Signed-off-by: Tilman Schmidt <tilman@imap.cc>
Tested-by: Roland Kletzing <devzero@web.de>
Cc: Hansjoerg Lipp <hjlipp@web.de>
Cc: Karsten Keil <kkeil@suse.de>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mingo/linux-2.6-sched-devel

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mingo/linux-2.6-sched-devel:
  sched: don't allow rt_runtime_us to be zero for groups having rt tasks
  sched: rt-group: fixup schedulability constraints calculation
  sched: fix the wrong time slice value for SCHED_FIFO tasks
  sched: export task_nice
  sched: balance RT task resched only on runqueue
  sched: retain vruntime

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/x86/linux-2.6-x86:
  x86-boot: don't request VBE2 information
  x86: re-add reboot fixups
  x86: fix typo in step.c
  x86: fix merge mistake in i387.c
  x86: clear DF before calling signal handler