- 24 Nov, 2014 39 commits
-
-
Andrzej Hajda authored
exynos_drm_manager is used by internal Exynos DRM framework for representing crtc. As it should be mapped 1:1 to vidi private context it seems more reasonable to embed it directly in that context. As a result further code simplification will be possible. Moreover it will be possible to handle multiple mixer devices in the system. Signed-off-by:
Andrzej Hajda <a.hajda@samsung.com> Signed-off-by:
Inki Dae <inki.dae@samsung.com>
-
Andrzej Hajda authored
The patch replaces accesses to manager->ctx pointer by container_of construct. It will allow to remove ctx field in the future. Signed-off-by:
-
Andrzej Hajda authored
exynos_drm_manager is used by internal Exynos DRM framework for representing crtc. As it should be mapped 1:1 to fimd private context it seems more reasonable to embed it directly in that context. As a result further code simplification will be possible. Moreover it will be possible to handle multiple mixer devices in the system. Signed-off-by:
-
YoungJun Cho authored
The exynos_dsi_te_irq_handler() works only dsi(DPMS) is on. So it is enough to enable and disable TE GPIO IRQ in exynos_dsi_enable(disable)_irq() like DSI IRQ. Signed-off-by:
YoungJun Cho <yj44.cho@samsung.com> Acked-by: Inki Dae <inki.dae@samsung.com>a Acked-by:
Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by:
-
YoungJun Cho authored
The drm_helper_hpd_irq_event() does dpms control and the panel is initialized and displayed on by it. So the exynos_dsi_te_irq_handler() should be registered beforehand. Signed-off-by:
-
Joonyoung Shim authored
The drm_handle_vblank should be called whenever be vsync, te interrupt means vsync on i80 interface. Signed-off-by:
Joonyoung Shim <jy0922.shim@samsung.com> Signed-off-by:
-
YoungJun Cho authored
There is a case like set config which requires triggering but vblank is not enabled yet. So triggering unset routine is required to exit from triggering mode. Signed-off-by:
-
YoungJun Cho authored
For the I80 interface, the video interrupt pending register(VIDINTCON1) should be handled in fimd_irq_handler() and the video interrupt control register(VIDINTCON0) should be handled in fimd_enable_vblank() and fimd_disable_vblank() like RGB interface. So this patch moves each set / unset routines into proper positions. Signed-off-by:
-
YoungJun Cho authored
This function is valid only the SoC has SHADOWCON register and it should be used together with fimd_enable_video_output() to match the ENWIN_F bit in WINCON# and C#_EN_F bit in SHADOWCON. Signed-off-by:
-
YoungJun Cho authored
This bit is used for video output and logic signal control. So it is better for readability. Signed-off-by:
-
YoungJun Cho authored
The C#_EN_F in SHADOWCON register is updated per frame. So it should be protected by fimd_shadow_protect_win(). Signed-off-by:
-
Joonyoung Shim authored
It's better to be checking whether triggerring in fimd_trigger function. Also it will return if in triggerring on fimd_te_handler, then it can't execute remain codes. Signed-off-by:
-
Joonyoung Shim authored
The exynos fimd provides video type selection bits from system register but exynos3 series don't has it, so needs has_vtsel flag and we can distinguish whether set video type selection bits. Signed-off-by:
-
Krzysztof Kozlowski authored
During system resume from suspend to RAM the Exynos DRM driver forced CRTC mode thus turning display on (DPMS_ON). This lead to runtime resuming of DSI which failed because whole LCD power domain was off and it was not allowed to turn on because of system resume in progress. Forcing mode should not be needed and removing it solves this particular problem. This necessary fix for following scenario reproduced on Exynos DRM: 1. Power domain is off before suspending the system. 2. System is suspended to RAM. 3. Resuming starts. The Exynos DRM driver resume callback is called. 4. The Exynos DRM driver calls drm_helper_resume_force_mode() which turns on the screen by calling exynos_dsi_dpms with DRM_MODE_DPMS_ON. 5. The Exynos DSI driver calls pm_runtime_get. The driver runtime resumes and this should turn LCD power domain on. 6. Unfortunately the domain cannot be turned on because system resume is in progress and genpd->prepared_count is positive. Steps to reproduce: 1. Add runtime PM to Exynos DSI driver. 2. Build Exynos DRM/FB without FRAMEBUFFER_CONSOLE. 3. Enable the connector and screen (e.g. with modeset-vsync). 4. echo 3 > /sys/devices/platform/exynos-drm/graphics/fb0/blank 5. echo mem > /sys/power/state 6. Resume. [ 77.712469] PM: early resume of devices complete after 3.854 msecs [ 77.712739] exynos-dsi 11c80000.dsi: pm_genpd_resume() [ 77.712758] exynos4-fimc 11800000.fimc: pm_genpd_resume() [ 77.712774] exynos4-fimc 11810000.fimc: pm_genpd_resume() [ 77.712787] exynos-drm-fimc 11820000.fimc: pm_genpd_resume() [ 77.712802] exynos-drm-fimc 11830000.fimc: pm_genpd_resume() [ 77.712815] s5p-mipi-csis 11880000.csis: pm_genpd_resume() [ 77.712829] s5p-mipi-csis 11890000.csis: pm_genpd_resume() [ 77.712843] exynos-fimc-lite 12390000.fimc-lite: pm_genpd_resume() [ 77.712856] exynos-fimc-lite 123a0000.fimc-lite: pm_genpd_resume() [ 77.713788] exynos4-fb 11c00000.fimd: pm_genpd_resume() [ 77.713912] wake disabled for irq 184 [ 77.713923] wake disabled for irq 185 [ 77.714082] wake disabled for irq 173 [ 77.715676] wake disabled for irq 176 [ 77.718540] exynos4-fb 11c00000.fimd: pm_genpd_runtime_resume() [ 77.718567] exynos4-fb 11c00000.fimd: state restore latency exceeded, new value 1708 ns [ 77.718636] exynos-dsi 11c80000.dsi: pm_genpd_runtime_resume() [ 77.892366] exynos-dsi 11c80000.dsi: PLL failed to stabilize [ 77.892377] exynos-dsi 11c80000.dsi: failed to configure DSI PLL [ 78.192168] exynos-dsi 11c80000.dsi: timeout waiting for reset [ 78.211578] exynos-dsi 11c80000.dsi: waiting for bus lanes timed out [ 78.307173] exynos-dsi 11c80000.dsi: xfer timed out: d1 00 (null) [ 78.307190] panel_s6e8aa0 11c80000.dsi.0: error -110 reading dcs seq(0xd1) [ 78.307199] panel_s6e8aa0 11c80000.dsi.0: read id failed Signed-off-by:
Krzysztof Kozlowski <k.kozlowski@samsung.com> Signed-off-by:
-
YoungJun Cho authored
The command mode panel should draw image earlier than the display on command execution to prevent showing garbage GRAM screen data. So should set dsi->state as DSIM_STATE_ENABLED between calling exynos_dsi_set_display_enable() and drm_panel_enable() to transmit image data before executing display on command. And moves the display on command execution routine from prepare() to enable() in drm_panel_funcs also. Signed-off-by:
-
YoungJun Cho authored
For providing VBLANK information, drm_handle_vblank() should be called properly, but it is blocked by wait_vsync_event condition which is set by manager_ops->wait_for_vblank(). So moves it out from wait_vsync_event routine. Signed-off-by:
-
YoungJun Cho authored
The exynos_drm_crtc_dpms() waits until pended page flip queue is empty, calls the drm_vblank_off() then calls manager->ops->dpms() when mode is DRM_MODE_DPMS_OFF. The fimd_dpms() is one of manager->ops->dpms()s and finally calls fimd_window_suspend(). But there is no active window and vblank is already off when it is called. So addtional waiting vblank is not necessary any more. Signed-off-by:
-
YoungJun Cho authored
This patch supports Exynos4415 SoC. Signed-off-by:
-
YoungJun Cho authored
This patch supports Exynos4415 SoC. Signed-off-by:
-
Vivek Gautam authored
Now that we have moved to generic phy based bindings, we don't need to have any code related to older dptx-phy. Nobody is using this dptx-phy anymore, so removing the same. Signed-off-by:
Vivek Gautam <gautam.vivek@samsung.com> Acked-by:
Jingoo Han <jg1.han@samsung.com> Signed-off-by:
-
Gustavo Padovan authored
They are not implemented anywhere, so wipe them out. Signed-off-by:
Gustavo Padovan <gustavo.padovan@collabora.co.uk> Signed-off-by:
-
Gustavo Padovan authored
Description of the @create_connector callback was missing, and the @manager was no longer needed. Signed-off-by:
-
Gustavo Padovan authored
Save a few bytes by compiling them all in the same byte. Signed-off-by:
-
Gustavo Padovan authored
This is a leftover, all code using this macro have been removed/ changed already. Signed-off-by:
-
Gustavo Padovan authored
Re-declare struct is not a good practice, let's use the original drm and exynos declarations. Signed-off-by:
-
Gustavo Padovan authored
Re-declare struct is not a good practice, let's use the original drm declarations. Signed-off-by:
-
Gustavo Padovan authored
The struct is defined in the same file, declare it here is just unnecessary Signed-off-by:
-
Gustavo Padovan authored
The struct is defined in the same file, declare it here is just unnecessary. Signed-off-by:
-
Gustavo Padovan authored
It is not even used in this header anymore. Signed-off-by:
-
Andrzej Hajda authored
The patch replaces accesses to display->ctx pointer by container_of construct. It will allow to remove ctx field in the future. Signed-off-by:
-
Andrzej Hajda authored
The patch removes redundant encoder field from private DSI context. Signed-off-by:
-
Andrzej Hajda authored
The patch replaces multiple evaluation of device address with local variable. Signed-off-by:
-
Andrzej Hajda authored
exynos_dsi_display is used by internal Exynos DRM framework for representing pair encoder->connecter. As it should be mapped 1:1 to dsi private context it seems more reasonable to embed it directly in that context. As a result further code simplification will be possible. Moreover it will be possible to handle multiple DSI devices in the system. Signed-off-by:
-
Andrzej Hajda authored
The patch replaces separate calls to driver (de)registration by loops over the array of drivers. As a result it significantly decreases number of ifdefs. Additionally it moves device registration related ifdefs to header file. Changelog v2: - Rebased. - Consider non kms driver in respect to infinite loop issue. Signed-off-by:
-
Inki Dae authored
This patch fixes null pointer dereference issue incurred when ipp driver is enabled and Exynos drm driver is closed. Non kms driver should register its own sub driver to setup necessary resources, which is done by load(). So null pointer dereference occurs when ipp driver is enabled and Exynos drm driver is closed because ipp core device is registered after component_master_add_with_match call. This patch makes exynos_drm_device_subdrv_probe() to be called after all non kms drivers are registered. Signed-off-by: -
Inki Dae authored
This patch fixes possible infinite loop issue by postponing registration to non kms drivers after component_master_add_with_match call, which can be incurred in all cases that non kms driver is probed and then component bind is failed This patch should be applied on top of below patches, http://comments.gmane.org/gmane.comp.video.dri.devel/117740 http://www.spinics.net/lists/linux-samsung-soc/msg38624.htmlSigned-off-by:
-
Inki Dae authored
This patch fixes a null pointer dereference issue incurred by calling g2d_remove when exynos_drm_platform_probe is failed. cmdlist_pool of g2d is allocated when g2d sub driver is probed. So if exynos_drm_platform_probe is failed, the g2d sub driver is not probed and the cmdlist_pool is still NULL. Signed-off-by: -
Inki Dae authored
This patch resovles the infinite loop issue incurred when Exyno drm driver is enabled but all kms drivers are disabled on Exynos board by returning -EPROBE_DEFER only in case that there is kms device registered. Signed-off-by: -
Inki Dae authored
This patch resolves temporarily infinite loop issue incurred when Exynos drm driver is enabled and multi-platform kernel is used by registering Exynos drm device object only in case of Exynos SoC. So this patch will be replaced with more generic way later. Signed-off-by:
-
- 21 Nov, 2014 1 commit
-
-
git://people.freedesktop.org/~agd5f/linuxDave Airlie authored
- More CI dpm fixes - Initial DPM fan control for SI/CI (disabled by default) - GPUVM multi-ring efficiency improvements - Some cursor fixes * 'drm-next-3.19' of git://people.freedesktop.org/~agd5f/linux: (22 commits) drm/radeon: update the VM after setting BO address v4 drm/radeon: sync PT updates as shared v2 drm/radeon: sync PD updates as shared drm/radeon: fence BO_VAs manually drm/radeon: use one VMID for each ring drm/radeon: track VM update fences separately drm/radeon: fence PT updates manually v2 drm/radeon: split semaphore and sync object handling v2 drm/radeon: remove unnecessary VM syncs drm/radeon: stop re-reserving the BO in radeon_vm_bo_set_addr drm/radeon: rework vm_flush parameters drm/radeon/ci: disable needless sclk changes drm/radeon/ci: force pcie level before sclk and mclk drm/radeon/ci: use different smc command for pcie dpm drm/radeon/ci: apply disp voltage changes before clk changes drm/radeon: fix PCC debugging message for CI DPM drm/radeon/dpm: add thermal dpm support for CI drm/radeon/dpm: add smc fan control for CI (v2) drm/radeon/dpm: add smc fan control for SI (v2) drm/radeon: work around a hw bug in MGCG on CIK ...
-
