Skip to content

L
linux
Switch branch/tag
  1. 24 Aug, 2010 7 commits
    • David S. Miller's avatar
      bna: Delete get_flags and set_flags ethtool methods. · f04b4dd2
      David S. Miller authored 
      This driver doesn't support LRO, NTUPLE, or the RXHASH
features.  So it should not set these ethtool operations.

This also fixes the warning:

drivers/net/bna/bnad_ethtool.c:1272: warning: initialization from incompatible pointer type
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      f04b4dd2
    • Rasesh Mody's avatar
      bna: Brocade 10Gb Ethernet device driver · 8b230ed8
      Rasesh Mody authored 
      This is patch 1/6 which contains linux driver source for
Brocade's BR1010/BR1020 10Gb CEE capable ethernet adapter.
Signed-off-by: default avatarDebashis Dutt <ddutt@brocade.com>
Signed-off-by: default avatarRasesh Mody <rmody@brocade.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      8b230ed8
    • Gerrit Renker's avatar
      dccp ccid-2: Replace broken RTT estimator with better algorithm · 231cc2aa
      Gerrit Renker authored 
      The current CCID-2 RTT estimator code is in parts broken and lags behind the
suggestions in RFC2988 of using scaled variants for SRTT/RTTVAR.

That code is replaced by the present patch, which reuses the Linux TCP RTT
estimator code.

Further details:
----------------
 1. The minimum RTO of previously one second has been replaced with TCP's, since
    RFC4341, sec. 5 says that the minimum of 1 sec. (suggested in RFC2988, 2.4)
    is not necessary. Instead, the TCP_RTO_MIN is used, which agrees with DCCP's
    concept of a default RTT (RFC 4340, 3.4).
 2. The maximum RTO has been set to DCCP_RTO_MAX (64 sec), which agrees with
    RFC2988, (2.5).
 3. De-inlined the function ccid2_new_ack().
 4. Added a FIXME: the RTT is sampled several times per Ack Vector, which will
    give the wrong estimate. It should be replaced with one sample per Ack.
    However, at the moment this can not be resolved easily, since
    - it depends on TX history code (which also needs some work),
    - the cleanest solution is not to use the `sent' time at all (saves 4 bytes
      per entry) and use DCCP timestamps / elapsed time to estimated the RTT,
      which however is non-trivial to get right (but needs to be done).

Reasons for reusing the Linux TCP estimator algorithm:
------------------------------------------------------
Some time was spent to find a better alternative, using basic RFC2988 as a first
step. Further analysis and experimentation showed that the Linux TCP RTO
estimator is superior to a basic RFC2988 implementation. A summary is on
http://www.erg.abdn.ac.uk/users/gerrit/dccp/notes/ccid2/rto_estimator/

In addition, this estimator fared well in a recent empirical evaluation:

    Rewaskar, Sushant, Jasleen Kaur and F. Donelson Smith.
    A Performance Study of Loss Detection/Recovery in Real-world TCP
    Implementations. Proceedings of 15th IEEE International
    Conference on Network Protocols (ICNP-07), 2007.

Thus there is significant benefit in reusing the existing TCP code.
Signed-off-by: default avatarGerrit Renker <gerrit@erg.abdn.ac.uk>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      231cc2aa
    • Gerrit Renker's avatar
      dccp ccid-2: Simplify dec_pipe and rearming of RTO timer · c38c92a8
      Gerrit Renker authored 
      This removes the dec_pipe function and improves the way the RTO timer is rearmed
when a new acknowledgment comes in.

Details and justification for removal:
--------------------------------------
 1) The BUG_ON in dec_pipe is never triggered: pipe is only decremented for TX
    history entries between tail and head, for which it had previously been
    incremented in tx_packet_sent; and it is not decremented twice for the same
    entry, since it is
    - either decremented when a corresponding Ack Vector cell in state 0 or 1
      was received (and then ccid2s_acked==1),
    - or it is decremented when ccid2s_acked==0, as part of the loss detection
      in tx_packet_recv (and hence it can not have been decremented earlier).

 2) Restarting the RTO timer happens for every single entry in each Ack Vector
    parsed by tx_packet_recv (according to RFC 4340, 11.4 this can happen up to
    16192 times per Ack Vector).

 3) The RTO timer should not be restarted when all outstanding data has been
    acknowledged. This is currently done similar to (2), in dec_pipe, when
    pipe has reached 0.

The patch onsolidates the code which rearms the RTO timer, combining the
segments from new_ack and dec_pipe. As a result, the code becomes clearer
(compare with tcp_rearm_rto()).
Signed-off-by: default avatarGerrit Renker <gerrit@erg.abdn.ac.uk>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      c38c92a8
    • Gerrit Renker's avatar
      dccp ccid-2: Remove redundant sanity tests · 30564e35
      Gerrit Renker authored 
      This removes the ccid2_hc_tx_check_sanity function: it is redundant.

Details:

The tx_check_sanity function performs three tests:
 1) it checks that the circular TX list is sorted
    - in ascending order of sequence number (ccid2s_seq)
    - and time (ccid2s_sent),
    - in the direction from `tail' (hctx_seqt) to `head' (hctx_seqh);
 2) it ensures that the entire list has the length seqbufc * CCID2_SEQBUF_LEN;
 3) it ensures that pipe equals the number of packets that were not
    marked `acked' (ccid2s_acked) between `tail' and `head'.

The following argues that each of these tests is redundant, this can be verified
by going through the code.

(1) is not necessary, since both time and GSS increase from one packet to the
next, so that subsequent insertions in tx_packet_sent (which advance the `head'
pointer) will be in ascending order of time and sequence number.

In (2), the length of the list is always equal to seqbufc times CCID2_SEQBUF_LEN
(set to 1024) unless allocation caused an earlier failure, because:
 * at initialisation (tx_init), there is one chunk of size 1024 and seqbufc=1;
 * subsequent calls to tx_alloc_seq take place whenever head->next == tail in
   tx_packet_sent; then a new chunk of size 1024 is inserted between head and
   tail, and seqbufc is incremented by one.

To show that (3) is redundant requires looking at two cases.

The `pipe' variable of the TX socket is incremented only in tx_packet_sent, and
decremented in tx_packet_recv.  When head == tail (TX history empty) then pipe
should be 0, which is the case directly after initialisation and after a
retransmission timeout has occurred (ccid2_hc_tx_rto_expire).

The first case involves parsing Ack Vectors for packets recorded in the live
portion of the buffer, between tail and head. For each packet marked by the
receiver as received (state 0) or ECN-marked (state 1), pipe is decremented by
one, so for all such packets the BUG_ON in tx_check_sanity will not trigger.

The second case is the loss detection in the second half of tx_packet_recv,
below the comment "Check for NUMDUPACK".

The first while-loop here ensures that the sequence number of `seqp' is either
above or equal to `high_ack', or otherwise equal to the highest sequence number
sent so far (of the entry head->prev, as head points to the next unsent entry).
The next while-loop ("while (1)") counts the number of acked packets starting
from that position of seqp, going backwards in the direction from head->prev to
tail. If NUMDUPACK=3 such packets were counted within this loop, `seqp' points
to the last acknowledged packet of these, and the "if (done == NUMDUPACK)" block
is entered next.
The while-loop contained within that block in turn traverses the list backwards,
from head to tail; the position of `seqp' is saved in the variable `last_acked'.
For each packet not marked as `acked', a congestion event is triggered within
the loop, and pipe is decremented. The loop terminates when `seqp' has reached
`tail', whereupon tail is set to the position previously stored in `last_acked'.
Thus, between `last_acked' and the previous position of `tail',
 - pipe has been decremented earlier if the packet was marked as state 0 or 1;
 - pipe was decremented if the packet was not marked as acked.
That is, pipe has been decremented by the number of packets between `last_acked'
and the previous position of `tail'. As a consequence, pipe now again reflects
the number of packets which have not (yet) been acked between the new position
of tail (at `last_acked') and head->prev, or 0 if head==tail. The result is that
the BUG_ON condition in check_sanity will also not be triggered, hence the test
(3) is also redundant.
Signed-off-by: default avatarGerrit Renker <gerrit@erg.abdn.ac.uk>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      30564e35
    • Gerrit Renker's avatar
      dccp ccid-3: No more CCID control blocks in LISTEN state · 51c22bb5
      Gerrit Renker authored 
      The CCIDs are activated as last of the features, at the end of the handshake,
were the LISTEN state of the master socket is inherited into the server
state of the child socket. Thus, the only states visible to CCIDs now are
OPEN/PARTOPEN, and the closing states.

This allows to remove tests which were previously necessary to protect
against referencing a socket in the listening state (in CCID-3), but which
now have become redundant.

As a further byproduct of enabling the CCIDs only after the connection has been
fully established, several typecast-initialisations of ccid3_hc_{rx,tx}_sock
can now be eliminated:
 * the CCID is loaded, so it is not necessary to test if it is NULL,
 * if it is possible to load a CCID and leave the private area NULL, then this
    is a bug, which should crash loudly - and earlier,
 * the test for state==OPEN || state==PARTOPEN now reduces only to the closing
   phase (e.g. when the node has received an unexpected Reset).
Signed-off-by: default avatarGerrit Renker <gerrit@erg.abdn.ac.uk>
Acked-by: default avatarIan McDonald <ian.mcdonald@jandi.co.nz>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      51c22bb5
    • Gerrit Renker's avatar
      ccid: ccid-2/3 code cosmetics · 67b67e36
      Gerrit Renker authored 
      This patch collects cosmetics-only changes to separate these from
code changes:
 * update with regard to CodingStyle and whitespace changes,
 * documentation:
   - adding/revising comments,
   - remove CCID-3 RX socket documentation which is either
     duplicate or refers to fields that no longer exist,
 * expand embedded tfrc_tx_info struct inline for consistency,
   removing indirections via #define.
Signed-off-by: default avatarGerrit Renker <gerrit@erg.abdn.ac.uk>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      67b67e36
  3. 23 Aug, 2010 13 commits
  5. 22 Aug, 2010 8 commits
  7. 20 Aug, 2010 12 commits
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7