- 03 Jan, 2011 1 commit
-
-
Paul Gortmaker authored
The drivers associated with the prototypes in this commit have been deleted some time ago, but the externs escaped detection. Using a simple "git grep" shows that these references are historical artefacts, only mentioned by the deleted lines. Signed-off-by:
Paul Gortmaker <paul.gortmaker@windriver.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
- 01 Jan, 2011 23 commits
-
-
Paul Gortmaker authored
The tipc/dbg.h file was recently renamed to tipc/log.h, but the re-include define was not updated accordingly. Signed-off-by:
-
stephen hemminger authored
This implements 64 bit statistics support and fixes races when reading counter values. The PHY counters can only be accessed 16 bits at a time, so they are subject to carry races. NB: * TX/RX counters are maintained in software because the the hardware packet count is only a 32 bit value. * Error counters are really only 32 bit. * Old 32 bit counter fields in dev->stats still used for some software counters Signed-off-by:Stephen Hemminger <shemminger@vyatta.com> Signed-off-by:
-
Allan Stephens authored
Cleans up TIPC's source code to eliminate the presence of unnecessary use of {} around single statements. These changes are purely cosmetic and do not alter the operation of TIPC in any way. Signed-off-by:Allan Stephens <Allan.Stephens@windriver.com> Signed-off-by:
-
Allan Stephens authored
Cleans up TIPC's source code to eliminate the needless initialization of static variables to zero. These changes are purely cosmetic and do not alter the operation of TIPC in any way. Signed-off-by:
-
Allan Stephens authored
Cleans up TIPC's source code to eliminate assigning values to variables within conditional expressions, improving code readability and reducing warnings from various code checker tools. These changes are purely cosmetic and do not alter the operation of TIPC in any way. Signed-off-by:
-
Allan Stephens authored
Cleans up TIPC's source code to eliminate deviations from generally accepted coding conventions relating to leading/trailing white space and white space around commas, braces, cases, and sizeof. These changes are purely cosmetic and do not alter the operation of TIPC in any way. Signed-off-by:
-
Paul Gortmaker authored
The existing code for the copy to user and error handling at the end of getsockopt isn't easy to follow, due to the excessive use of if/else. By simply using return where appropriate, it can be made smaller and easier to follow at the same time. Signed-off-by:
-
Allan Stephens authored
It is acceptable to call kfree() with NULL, so these checks are not serving any useful purpose. Signed-off-by:
-
Allan Stephens authored
Eliminates a number of #include statements that no longer serve any useful purpose. Signed-off-by:
-
Allan Stephens authored
Completes the simplification of TIPC's debugging capabilities. By default TIPC includes no debugging code, and any debugging code added by developers that calls the dbg() and dbg_macros() is compiled out. If debugging support is enabled, TIPC prints out some additional data about its internal state when certain abnormal conditions occur, and any developer-added calls to the TIPC debug macros are compiled in. Signed-off-by:
-
Allan Stephens authored
Eliminates most link-specific debugging code in TIPC, which is now largely unnecessary. All calls to the link-specific debugging macros have been removed, as are the macros themselves; in addition, the optional allocation of print buffers to hold debugging information for each link endpoint has been removed. The ability for TIPC to print out helpful diagnostic information when link retransmit failures occur has been retained for the time being, as an aid in tracking down the cause of such failures. Signed-off-by:
-
Allan Stephens authored
Eliminates calls to two debugging macros that are being completely obsoleted, as well as any associated debugging routines that are no longer required. Signed-off-by:
-
Allan Stephens authored
Eliminates obsolete calls to two of TIPC's main debugging macros, as well as a pair of associated debugging routines that are no longer required. Signed-off-by:
-
Allan Stephens authored
As the first step in removing obsolete debugging code from TIPC the files that implement TIPC's non-debug-related log buffer subsystem are renamed to better reflect their true nature. Signed-off-by:
-
Allan Stephens authored
Eliminates a sorted list TIPC uses to keep track of the neighboring nodes it has links to, since this duplicates information already present in the internal array of node object pointers. Signed-off-by:
-
Allan Stephens authored
Eliminates routines, data structures, and files that make up TIPC's user registry. The user registry is no longer needed since the native API routines that utilized it no longer exist and there are no longer any internal TIPC services that use it. Signed-off-by:
-
Allan Stephens authored
Simplifies TIPC's network topology service so that it no longer registers its ports with the user registry, since the service doesn't take advantage of any of the registry's capabilities. Signed-off-by:
-
Allan Stephens authored
Simplifies TIPC's configuration service so that it no longer registers its port with the user registry, since the service doesn't take advantage of any of the registry's capabilities. Signed-off-by:
-
Allan Stephens authored
Eliminates routines, data structures, and files that were intended to allow TIPC to support a network containing multiple clusters. Currently, TIPC supports only networks consisting of a single cluster within a single zone, so this code is unnecessary. Signed-off-by:
-
Allan Stephens authored
Eliminates routines and data structures that were intended to allow TIPC to route messages to other clusters. Currently, TIPC supports only networks consisting of a single cluster within a single zone, so this code is unnecessary. Signed-off-by:
-
Allan Stephens authored
Simplifies routines and data structures that were intended to allow TIPC to support slave nodes (i.e. nodes that did not have links to all of the other nodes in its cluster, forcing TIPC to route messages that it could not deliver directly through a non-slave node). Currently, TIPC supports only networks containing non-slave nodes, so this code is unnecessary. Note: The latest edition of the TIPC 2.0 Specification has eliminated the concept of slave nodes entirely. Signed-off-by:
-
Allan Stephens authored
Eliminates routines, data structures, and files that were intended to allows TIPC to support a network containing multiple zones. Currently, TIPC supports only networks consisting of a single cluster within a single zone, so this code is unnecessary. Signed-off-by:
-
Eric Dumazet authored
In case CONFIG_PM_SLEEP is disabled, we dont need tg3_suspend() and tg3_resume(). drivers/net/tg3.c:15056: warning: ‘tg3_suspend’ defined but not used drivers/net/tg3.c:15110: warning: ‘tg3_resume’ defined but not used Signed-off-by:
Eric Dumazet <eric.dumazet@gmail.com> Cc: Rafael J. Wysocki <rjw@sisk.pl> Cc: Michael Chan <mchan@broadcom.com> Cc: Matt Carlson <mcarlson@broadcom.com> Signed-off-by:
-
- 31 Dec, 2010 16 commits
-
-
stephen hemminger authored
The skge driver used the legacy PCI power management, and did its own PCI callbacks. Use the same code model as Rafael's changes to sky2. Let the PCI subsystem take care of all the PCI-specific aspects of device handling during system power transitions. Compile tested only (so far). Signed-off-by:
Rafael J. Wysocki <rjw@sisk.pl> Signed-off-by:
-
Eric Dumazet authored
slot_dequeue_head() should make sure slot skb chain is correct in both ways, or we can crash if all possible flows are in use. Jarek pointed out slot_queue_init() can now be done in sfq_init() once, instead each time a flow is setup. Signed-off-by:
-
Eric Dumazet authored
SFQ is currently 'limited' to small packets, because it uses a 15bit allotment number per flow. Introduce a scale by 8, so that we can handle full size TSO/GRO packets. Use appropriate handling to make sure allot is positive before a new packet is dequeued, so that fairness is respected. Signed-off-by:
Jarek Poplawski <jarkao2@gmail.com> Cc: Patrick McHardy <kaber@trash.net> Signed-off-by:
-
Rafael J. Wysocki authored
The sky2 driver uses the legacy PCI power management, so it has to do some PCI-specific things in its ->suspend() and ->resume() callbacks, which isn't necessary and should better be done by the PCI sybsystem-level power management code. Moreover, it uses device_set_wakeup_enable() incorrectly (that function should be used when the WoL setting is changed rather than during suspend). Convert sky2 to the new PCI power management framework and make it let the PCI subsystem take care of all the PCI-specific aspects of device handling during system power transitions. Tested on a desktop machine with a Marvell 88E8056 PCI-E adapter. Signed-off-by:
-
Rafael J. Wysocki authored
The tg3 driver uses the legacy PCI power management, so it has to do some PCI-specific things in its ->suspend() and ->resume() callbacks, which isn't necessary and should better be done by the PCI sybsystem-level power management code. Convert tg3 to the new PCI power management framework and make it let the PCI subsystem take care of all the PCI-specific aspects of device handling during system power transitions. Tested on HP nx6325 with a NetXtreme BCM5788 adapter. Signed-off-by:
-
Dan Carpenter authored
We already verified that "dev->udev->actconfig->extralen" was non-zero so "len" is non-zero here as well. Signed-off-by:
Dan Carpenter <error27@gmail.com> Acked-by:
Oliver Neukum <oneukum@suse.de> Signed-off-by:
-
Michael Chan authored
Update MIPS firmware to 6.2.1, with improved small packet performance in RSS mode, and iSCSI CID allocation bug fix on 5708. Update driver version to 2.0.21. Signed-off-by:
Michael Chan <mchan@broadcom.com> Signed-off-by:
-
Michael Chan authored
When changing ring size, we free all memory including status block memory. If we're in INTA mode and sharing IRQ, the IRQ handler can be called and it will reference the NULL status block pointer. Because of the lockless design of the IRQ handler, there is no simple way to synchronize and prevent this. So we avoid this problem by freeing the IRQ handler before freeing the status block memory. Signed-off-by:
-
Amit Kumar Salecha authored
This driver supports only Intelligent Ethernet Adapters. Signed-off-by:
Amit Kumar Salecha <amit.salecha@qlogic.com> Signed-off-by:
-
Shmulik Ravid authored
A couple of small cleanups for patches: [net-next-2.6 PATCH 1/3] dcbnl: add support for ieee8021Qaz attributes [net-next-2.6 PATCH 2/3] dcbnl: add appliction tlv handlers [net-next-2.6 PATCH 3/3] net_dcb: add application notifiers Signed-off-by:
Shmulik Ravid <shmulikr@broadcom.com> Signed-off-by:
-
Shmulik Ravid authored
Adding dcbnl implementation to bnx2x allowing users to manage the embedded DCBX engine. This patch is dependent on the following patches: [net-next-2.6 PATCH 1/3] dcbnl: add support for ieee8021Qaz attributes [net-next-2.6 PATCH 2/3] dcbnl: add appliction tlv handlers [net-next-2.6 PATCH 3/3] net_dcb: add application notifiers Signed-off-by:
Eilon Greenstein <eilong@broadcom.com> Signed-off-by:
-
Shmulik Ravid authored
Adding a pair of set-get routines to dcbnl for setting the negotiation flags of the various DCB features. Conforms to the CEE flavor of DCBX The user sets these flags (enable, advertise, willing) for each feature to be used by the DCBX engine. The 'get' routine returns which of the features is enabled after the negotiation. This patch is dependent on the following patches: [net-next-2.6 PATCH 1/3] dcbnl: add support for ieee8021Qaz attributes [net-next-2.6 PATCH 2/3] dcbnl: add appliction tlv handlers [net-next-2.6 PATCH 3/3] net_dcb: add application notifiers Signed-off-by:
-
Shmulik Ravid authored
Adding an optional DCBX capability and a pair for get-set routines for setting the device DCBX mode. The DCBX capability is a bit field of supported attributes. The user is expected to set the DCBX mode with a subset of the advertised attributes. This patch is dependent on the following patches: [net-next-2.6 PATCH 1/3] dcbnl: add support for ieee8021Qaz attributes [net-next-2.6 PATCH 2/3] dcbnl: add appliction tlv handlers [net-next-2.6 PATCH 3/3] net_dcb: add application notifiers Signed-off-by:
John Fastabend <john.r.fastabend@intel.com> Signed-off-by:
-
John Fastabend authored
DCBx applications priorities can be changed dynamically. If application stacks are expected to keep the skb priority consistent with the dcbx priority the stack will need to be notified when these changes occur. This patch adds application notifiers for the stack to register with. Signed-off-by:
-
John Fastabend authored
This patch adds application tlv handlers. Networking stacks may use the application priority to set the skb priority of their stack using the negoatiated dcbx priority. This patch provides the dcb_{get|set}app() routines for the stack to query these parameters. Notice lower layer drivers can use the dcbnl_ops routines if additional handling is needed. Perhaps in the firmware case for example Signed-off-by: -
John Fastabend authored
The IEEE8021Qaz is the IEEE standard version of CEE. The standard has had enough significant changes from the CEE version that many of the CEE attributes have no meaning in the new spec or do not easily map to IEEE standards. Rather then attempt to create a complicated mapping between CEE and IEEE standards this patch adds a nested IEEE attribute to the list of DCB attributes. The policy is, [DCB_ATTR_IFNAME] [DCB_ATTR_STATE] ... [DCB_ATTR_IEEE] [DCB_ATTR_IEEE_ETS] [DCB_ATTR_IEEE_PFC] [DCB_ATTR_IEEE_APP_TABLE] [DCB_ATTR_IEEE_APP] ... The following dcbnl_rtnl_ops routines were added to handle the IEEE standard, int (*ieee_getets) (struct net_device *, struct ieee_ets *); int (*ieee_setets) (struct net_device *, struct ieee_ets *); int (*ieee_getpfc) (struct net_device *, struct ieee_pfc *); int (*ieee_setpfc) (struct net_device *, struct ieee_pfc *); int (*ieee_getapp) (struct net_device *, struct dcb_app *); int (*ieee_setapp) (struct net_device *, struct dcb_app *); Signed-off-by:
-
