- 13 Jun, 2018 7 commits
-
-
Colin Xu authored
Handle BXT cmd_parser as SKL/KBL. v2: All supported platforms share the same routines. Remove the platform check by now and let is_supported_device() be the gate keeper. Signed-off-by:Colin Xu <colin.xu@intel.com> Signed-off-by:
Zhenyu Wang <zhenyuw@linux.intel.com>
-
Colin Xu authored
Handle pending tlb flush, mocs/mmio switch and context as KBL. Signed-off-by:
-
Colin Xu authored
Initialize BXT irq handler as SKL/KBL. v2: All supported platforms share the same irq ops and map. Remove the platform check by now and let is_supported_device() be the gate keeper. Signed-off-by: -
Colin Xu authored
Initialize BXT gtt as SKL/KBL. v2: All supported platforms share the same gtt ops. Remove the platform check by now and let is_supported_device() be the gate keeper. Signed-off-by: -
Colin Xu authored
Initialize BXT device info as SKL/KBL. v2: All supported platforms share the same device configuration. Remove the platform check by now and let is_supported_device() be the gate keeper. Signed-off-by: -
Colin Xu authored
As referred in PRM for Broxton Graphics on 01.org Signed-off-by:
-
Colin Xu authored
Broxton belongs to GEN9 family so add to SKL and GEN9 plus. Signed-off-by:
-
- 11 Jun, 2018 3 commits
-
-
Xinyun Liu authored
Array 'pdp_pair' of size 1 may use index value(s) 1..7. Changed to pdps[8] to avoid confusion. Signed-off-by:
Xinyun Liu <xinyun.liu@intel.com> Signed-off-by:
-
Xinyun Liu authored
type is already checked in the function entry. So it is unnecessary to check it again. Signed-off-by:
-
Xinyun Liu authored
Add sanity check for up_irq_info. Signed-off-by:
-
- 07 Jun, 2018 1 commit
-
-
Zhenyu Wang authored
Backmerge for recent request->hw_context change and new vGPU huge page capability definition. Signed-off-by:
-
- 06 Jun, 2018 3 commits
-
-
Rodrigo Vivi authored
Signed-off-by:Rodrigo Vivi <rodrigo.vivi@intel.com>
-
Chris Wilson authored
The macro declared the ppgtt parameter but implicitly used the local vm instead. Signed-off-by:
Chris Wilson <chris@chris-wilson.co.uk> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com> Cc: Matthew Auld <matthew.william.auld@gmail.com> Reviewed-by:
Matthew Auld <matthew.william.auld@gmail.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180606205128.25952-1-chris@chris-wilson.co.uk
-
Chris Wilson authored
When we reach the magic value and do inject a fault into our module load, mark the module option as being hit. Since we fail from inside pci probe, the module load isn't actually aborted and the module (and parameters) are left lingering. igt can then inspect the parameter on its synchronous completion of modprobe to see if the fault injection was successful, and will keeping on injecting new faults until the module succeeds in loading having surpassed the number of fault points. v2: Reset to 0 after being hit; Signed-off-by:
Michał Winiarski <michal.winiarski@intel.com> Reviewed-by:
Michal Wajdeczko <michal.wajdeczko@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180606144153.4244-1-chris@chris-wilson.co.uk
-
- 05 Jun, 2018 13 commits
-
-
Chris Wilson authored
In the near future, I want to subclass gen6_hw_ppgtt as it contains a few specialised members and I wish to add more. To avoid the ugliness of using ppgtt->base.base, rename the i915_hw_ppgtt base member (i915_address_space) as vm, which is our common shorthand for an i915_address_space local. Signed-off-by:
Mika Kuoppala <mika.kuoppala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180605153758.18422-1-chris@chris-wilson.co.uk
-
Chris Wilson authored
The inactive counter was over the active list, and vice versa. Fortuitously this should not cause a problem in practice as they shared the same array and clamped the number of entries they would write. Signed-off-by:
-
Michal Wajdeczko authored
In case of failure during GuC clients creation, we forget to cleanup earlier pool allocation. Use proper teardown to fix that. Signed-off-by:
Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com> Signed-off-by:
-
Tvrtko Ursulin authored
As Chris has discovered on his Ivybridge, and later automated test runs have confirmed, on most of our platforms hrtimer faced with heavy GPU load can occasionally become sufficiently imprecise to affect PMU sampling calculations. This means we cannot assume sampling frequency is what we asked for, but we need to measure the interval ourselves. This patch is similar to Chris' original proposal for per-engine counters, but instead of introducing a new set to work around the problem with frequency sampling, it swaps around the way internal frequency accounting is done. Instead of accumulating current frequency and dividing by sampling frequency on readout, it accumulates frequency scaled by each period. v2: * Typo in commit message, comment on period calculation and USEC_PER_SEC. (Chris Wilson) Testcase: igt/perf_pmu/*busy* # snb, ivb, hsw Signed-off-by:
Tvrtko Ursulin <tvrtko.ursulin@intel.com> Suggested-by:
-
Tvrtko Ursulin authored
Underlaying field is u64 so the tracepoint needs to be as well. v2: * Re-order binary packet for 64-bit alignment. (Chris Wilson) Signed-off-by:
-
Tvrtko Ursulin authored
In the string tracepoint representation we ended up with the engine sandwiched between context hardware id and context fence id. Move the two pieces of context data together for redability. Binary records are left as is, that is both fields remaing under the existing name and ordering. v2: * Do not consolidate the printk format, just reorder. (Lionel) Signed-off-by:
Lionel Landwerlin <lionel.g.landwerlin@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180525082642.18246-2-tvrtko.ursulin@linux.intel.com
-
Tvrtko Ursulin authored
Instead of using the engine->id, use uabi_class:instance pairs in trace- points including engine info. This will be more readable, more future proof and more stable for userspace consumption. v2: * Use u16 for class and instance. (Chris Wilson) Signed-off-by:
-
Chris Wilson authored
Since the kernel provides SZ_1M, use it in preference of 1 << 20. Signed-off-by:
-
Michal Wajdeczko authored
In function gem_init_hw() we are calling uc_init_hw() but in case of error later in function, we missed to call matching uc_fini_hw() v2: pulled out from the series Signed-off-by:
Sagar Arun Kamble <sagar.a.kamble@intel.com> Signed-off-by:
-
Chris Wilson authored
To spare ourselves a long line later, refactor the repeated check of bind_count vs pin_count to a helper. v2: Fix up the commentary! Suggested-by:
Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Signed-off-by:
-
Chris Wilson authored
In preparation, for having non-vma objects stored inside the ggtt, to handle restoration of the GGTT following resume, we need to walk over the ggtt address space rebinding vma, as opposed to walking over bound objects looking for ggtt entries. v2: Skip objects only bound for the aliasing_ppgtt Signed-off-by:
-
Chris Wilson authored
Currently, we have a special routine for pinning the context state at the start of activity tracking, but lack the complementary unpin routine. Create it to to ease later patches that want to do partial teardown on error, and, not least, to improve the readability of the code. Suggested-by:
-
Changbin Du authored
This adds a new vGPU cap info bit VGT_CAPS_HUGE_GTT, which is to detect whether the host supports shadowing of huge gtt pages. If host does support it, remove the page sizes restriction for vGPU. Signed-off-by:
Changbin Du <changbin.du@intel.com> Reviewed-by:
-
- 04 Jun, 2018 5 commits
-
-
Mahesh Kumar authored
Do not update number of enabled dbuf slices in dev_priv struct until we actually enable/disable dbuf slice in hw. This is leading to never updating dbuf slices and resulting in DBuf slice mismatch warning. Fixes: aa9664ff ("drm/i915/icl: Enable 2nd DBuf slice only when needed") Reviewed-by:
Paulo Zanoni <paulo.r.zanoni@intel.com> Signed-off-by:
Mahesh Kumar <mahesh1.kumar@intel.com> Signed-off-by:
-
Lionel Landwerlin authored
One thing we didn't really understand about the OA report is that the ContextID field (dword 2) is copy of the context descriptor (dword 1). On Gen8->10 and without using GuC we didn't notice the issue because we only checked the 21bits of the ContextID field in the OA reports which matches exactly the hw_id stored into the context descriptor. When using GuC submission we have an issue of a non matching hw_id because GuC uses bit 20 of the hw_id to signal proxy submission. This change introduces a mask to compare only the relevant bits. On ICL the context descriptor format has changed and we failed to address this. On top of using a mask we also need to shift the bits properly. v2: Reuse lrc_desc rather than recomputing part of it (Chris/Michel) v3: Always pin the context we're filtering with (Chris) Signed-off-by:
Michel Thierry <michel.thierry@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180602112946.30803-3-lionel.g.landwerlin@intel.com Cc: Lionel Landwerlin <lionel.g.landwerlin@intel.com> Cc: Matthew Auld <matthew.auld@intel.com> Cc: Jani Nikula <jani.nikula@linux.intel.com> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Cc: intel-gfx@lists.freedesktop.org
-
Lionel Landwerlin authored
We currently using GuC as a proxy to the hardware. When Guc is used in such mode, it consumes the bit 20 of the hw_id to indicate that the workload was submitted by proxy. So far we probably haven't seen the issue because we need to allocate 1048576+ contexts to hit this issue. Still, we should avoid allocating the hw_id on that bit and restriction to bits [0:19] (i.e 20bits instead of 21). v2: Leave the max hw_id computation in i915_gem_context.c (Michel) v3: Be consistent on if/else usage (Chris) Signed-off-by:
-
Chris Wilson authored
As the ppgtt for execlists is tightly coupled to the executing context, and not switch separately, we no longer use the ppgtt->switch_mm hooks on gen8+. Remove them. References: 79e6770c ("drm/i915: Remove obsolete ringbuffer emission for gen8+") Signed-off-by:
-
Michal Wajdeczko authored
We should keep i915_gem_init/fini functions together for easier tracking of their symmetry. v2: rebased, pulled out from the series Signed-off-by:
-
- 01 Jun, 2018 8 commits
-
-
Arkadiusz Hiler authored
Start using the new registers for ICL and on. Cc: Manasi Navare <manasi.d.navare@intel.com> Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Cc: Paulo Zanoni <paulo.r.zanoni@intel.com> Reviewed-by:
Arkadiusz Hiler <arkadiusz.hiler@intel.com> Signed-off-by:
-
Manasi Navare authored
PLLs are the source clocks for the DDIs so in order to determine the ddi clock we need to check the PLL configuration. This gets a little tricky for ICL since there is no register bit that maps directly to the link clock. So this patch creates a separate function in intel_dpll_mgr.c to obtain the write array PLL Params and compares the set pll_params with the table to get the corresponding link clock. v2: - Fix the encoder type check (DK). - Improve our error checking, return a sane value (Mika, Paulo). - Fix table entries (Paulo). Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Cc: Mika Kahola <mika.kahola@intel.com> Cc: Paulo Zanoni <paulo.r.zanoni@intel.com> Cc: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com> Reviewed-by:
Mika Kahola <mika.kahola@intel.com> Signed-off-by:
Manasi Navare <manasi.d.navare@intel.com> Signed-off-by:
Lucas De Marchi <lucas.demarchi@intel.com> [Paulo: implement v2] Signed-off-by:
-
Anusha Srivatsa authored
This patch adds the support to detect PCH_ICP. Reviewed-by:
Anusha Srivatsa <anusha.srivatsa@intel.com> Signed-off-by:
-
Radhakrishna Sripada authored
On ICL we need to map VBT DDC Pin to BSpec DDC Pin. Adding ICL Pin Values. According to VBT Block 2 (General Bytes Definition) DDC Bus +----------+-----------+--------------------+ | DDI Type | VBT Value | BSpec Mapped Value | +----------+-----------+--------------------+ | DDI-A | 0x1 | 0x1 | | DDI-B | 0x2 | 0x2 | | PORT-1 | 0x4 | 0x9 | | PORT-2 | 0x5 | 0xA | | PORT-3 | 0x6 | 0xB | | PORT-4 | 0x7 | 0xC | +----------+-----------+--------------------+ Cc: James Ausmus <james.ausmus@intel.com> Cc: Jani Nikula <jani.nikula@intel.com> Cc: Anusha Srivatsa <anusha.srivatsa@intel.com> Cc: Clinton Taylor <clinton.a.taylor@intel.com> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Cc: Paulo Zanoni <paulo.r.zanoni@intel.com> Reviewed-by:
James Ausmus <james.ausmus@intel.com> Signed-off-by:
Radhakrishna Sripada <radhakrishna.sripada@intel.com> Signed-off-by:
-
Manasi Navare authored
DFLEXDPMLE register is required to tell the FIA hardware which main links of DP are enabled on TCC Connectors. FIA uses this information to program PHY to Controller signal mapping. This register is applicable in both TC connector's Alternate mode as well as DP connector mode. v2: * Remove _ICL prefix since the reg is first introduced in ICL (Paulo) * s/ICL/icl in commit message (Lucas) Cc: Jani Nikula <jani.nikula@linux.intel.com> Cc: Animesh Manna <animesh.manna@intel.com> Cc: Madhav Chauhan <madhav.chauhan@intel.com> Cc: Anusha Srivatsa <anusha.srivatsa@intel.com> Cc: Paulo Zanoni <paulo.r.zanoni@intel.com> Reviewed-by:
-
Paulo Zanoni authored
Add and enum for TC ports and auxiliary functions to handle them. Icelake brings a lot of registers and other things that only apply to the TC ports and are indexed starting from 0, so having an enum for tc_ports that starts at 0 really helps the indexing. This patch is based on previous patches written by Dhinakaran Pandiyan and Mahesh Kumar. Cc: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com> Cc: Mahesh Kumar <mahesh1.kumar@intel.com> Reviewed-by:
-
Dhinakaran Pandiyan authored
ICL has AUX F. Cc: Paulo Zanoni <paulo.r.zanoni@intel.com> Cc: Anusha Srivatsa <anusha.srivatsa@intel.com> Reviewed-by:
Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com> Signed-off-by:
-
Mahesh Kumar authored
All connectors may not have best_encoder attached, so don't dereference encoder pointer for each connector. Fixes: c27e917e ("drm/i915/icl: add basic support for the ICL clocks") Reviewed-by:
-
