- 25 Dec, 2008 40 commits
-
-
Harvey Harrison authored
ROTATE -> rol32 XOR was always used with the same destination, use ^= PLUS/PLUSONE use ++ or += Signed-off-by:
Harvey Harrison <harvey.harrison@gmail.com> Signed-off-by:
Herbert Xu <herbert@gondor.apana.org.au>
-
Jarod Wilson authored
While its a slightly insane to bypass the key1 == key2 || key2 == key3 check in triple-des, since it reduces it to the same strength as des, some folks do need to do this from time to time for backwards compatibility with des. My own case is FIPS CAVS test vectors. Many triple-des test vectors use a single key, replicated 3x. In order to get the expected results, des3_ede_setkey() needs to only reject weak keys if the CRYPTO_TFM_REQ_WEAK_KEY flag is set. Also sets a more appropriate RES flag when a weak key is found. Signed-off-by:
Jarod Wilson <jarod@redhat.com> Signed-off-by:
-
Adrian-Ken Rueegsegger authored
This patch changes sha512 and sha384 to the new shash interface. Signed-off-by:
Adrian-Ken Rueegsegger <ken@codelabs.ch> Signed-off-by:
-
Adrian-Ken Rueegsegger authored
The message schedule W (u64[80]) is too big for the stack. In order for this algorithm to be used with shash it is moved to a static percpu area. Signed-off-by:
-
Adrian-Ken Rueegsegger authored
This patch changes michael_mic to the new shash interface. Signed-off-by:
-
Adrian-Ken Rueegsegger authored
This patch changes wp512, wp384 and wp256 to the new shash interface. Signed-off-by:
-
Adrian-Ken Rueegsegger authored
This patch changes tgr192, tgr160 and tgr128 to the new shash interface. Signed-off-by:
-
Adrian-Ken Rueegsegger authored
This patch changes sha256 and sha224 to the new shash interface. Signed-off-by:
-
Adrian-Ken Rueegsegger authored
This patch changes md5 to the new shash interface. Signed-off-by:
-
Adrian-Ken Rueegsegger authored
This patch changes md4 to the new shash interface. Signed-off-by:
-
Adrian-Ken Rueegsegger authored
This patch changes sha1 to the new shash interface. Signed-off-by:
-
Herbert Xu authored
This patch changes rmd320 to the new shash interface. Signed-off-by: -
Herbert Xu authored
This patch changes rmd256 to the new shash interface. Signed-off-by: -
Herbert Xu authored
This patch changes rmd160 to the new shash interface. Signed-off-by: -
Herbert Xu authored
This patch changes rmd128 to the new shash interface. Signed-off-by: -
Herbert Xu authored
This patch changes digest_null to the new shash interface. Signed-off-by: -
Herbert Xu authored
Since most cryptographic hash algorithms have no keys, this patch makes the setkey function optional for ahash and shash. Signed-off-by: -
Geert Uytterhoeven authored
When self-testing (de)compression algorithms, make sure the actual size of the (de)compressed output data matches the expected output size. Otherwise, in case the actual output size would be smaller than the expected output size, the subsequent buffer compare test would still succeed, and no error would be reported. Signed-off-by:
Geert Uytterhoeven <Geert.Uytterhoeven@sonycom.com> Signed-off-by:
-
Harvey Harrison authored
Base versions handle constant folding just fine. Signed-off-by:
-
Ingo Molnar authored
This warning: crypto/testmgr.c: In function ‘test_comp’: crypto/testmgr.c:829: warning: ‘ret’ may be used uninitialized in this function triggers because GCC correctly notices that in the ctcount == 0 && dtcount != 0 input condition case this function can return an undefined value, if the second loop fails. Remove the shadowed 'ret' variable from the second loop that was probably unintended. Signed-off-by:
Ingo Molnar <mingo@elte.hu> Signed-off-by:
-
Evgeniy Polyakov authored
Use KM_SOFTIRQ instead of KM_IRQ in tasklet context. Added bug_on on input no-page condition. Signed-off-by:
Evgeniy Polyakov <zbr@ioremap.net> Signed-off-by:
-
Evgeniy Polyakov authored
Fix queue management. Change ring size and perform its check not one after another descriptor, but using stored pointers to the last checked descriptors. Signed-off-by:
-
Patrick McHardy authored
Signed-off-by:
Patrick McHardy <kaber@trash.net> Signed-off-by:
-
Patrick McHardy authored
Signed-off-by:
-
Patrick McHardy authored
HIFN uses the transform context to store per-request data, which breaks when more than one request is outstanding. Move per request members from struct hifn_context to a new struct hifn_request_context and convert the code to use this. Signed-off-by:
-
Patrick McHardy authored
Signed-off-by:
-
Patrick McHardy authored
Signed-off-by:
-
Jarod Wilson authored
The ANSI X9.31 PRNG docs aren't particularly clear on how to increment DT, but empirical testing shows we're incrementing from the wrong end. A 10,000 iteration Monte Carlo RNG test currently winds up not getting the expected result. From http://csrc.nist.gov/groups/STM/cavp/documents/rng/RNGVS.pdf : # CAVS 4.3 # ANSI931 MCT [X9.31] [AES 128-Key] COUNT = 0 Key = 9f5b51200bf334b5d82be8c37255c848 DT = 6376bbe52902ba3b67c925fa701f11ac V = 572c8e76872647977e74fbddc49501d1 R = 48e9bd0d06ee18fbe45790d5c3fc9b73 Currently, we get 0dd08496c4f7178bfa70a2161a79459a after 10000 loops. Inverting the DT increment routine results in us obtaining the expected result of 48e9bd0d06ee18fbe45790d5c3fc9b73. Verified on both x86_64 and ppc64. Signed-off-by:
Neil Horman <nhorman@tuxdriver.com> Signed-off-by:
-
Herbert Xu authored
Selecting CRYPTO_CRC32C is not enough as CRYPTO which CRYPTO_CRC32C depends on may be disabled. This patch adds the select on CRYPTO. Signed-off-by: -
Jarod Wilson authored
While working with some FIPS RNGVS test vectors yesterday, I discovered a little bug in the way the ansi_cprng code works right now. For example, the following test vector (complete with expected result) from http://csrc.nist.gov/groups/STM/cavp/documents/rng/RNGVS.pdf ... Key = f3b1666d13607242ed061cabb8d46202 DT = e6b3be782a23fa62d71d4afbb0e922fc V = f0000000000000000000000000000000 R = 88dda456302423e5f69da57e7b95c73a ...when run through ansi_cprng, yields an incorrect R value of e2afe0d794120103d6e86a2b503bdfaa. If I load up ansi_cprng w/dbg=1 though, it was fairly obvious what was going wrong: ----8<---- getting 16 random bytes for context ffff810033fb2b10 Calling _get_more_prng_bytes for context ffff810033fb2b10 Input DT: 00000000: e6 b3 be 78 2a 23 fa 62 d7 1d 4a fb b0 e9 22 fc Input I: 00000000: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 Input V: 00000000: f0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 tmp stage 0: 00000000: e6 b3 be 78 2a 23 fa 62 d7 1d 4a fb b0 e9 22 fc tmp stage 1: 00000000: f4 8e cb 25 94 3e 8c 31 d6 14 cd 8a 23 f1 3f 84 tmp stage 2: 00000000: 8c 53 6f 73 a4 1a af d4 20 89 68 f4 58 64 f8 be Returning new block for context ffff810033fb2b10 Output DT: 00000000: e7 b3 be 78 2a 23 fa 62 d7 1d 4a fb b0 e9 22 fc Output I: 00000000: 04 8e cb 25 94 3e 8c 31 d6 14 cd 8a 23 f1 3f 84 Output V: 00000000: 48 89 3b 71 bc e4 00 b6 5e 21 ba 37 8a 0a d5 70 New Random Data: 00000000: 88 dd a4 56 30 24 23 e5 f6 9d a5 7e 7b 95 c7 3a Calling _get_more_prng_bytes for context ffff810033fb2b10 Input DT: 00000000: e7 b3 be 78 2a 23 fa 62 d7 1d 4a fb b0 e9 22 fc Input I: 00000000: 04 8e cb 25 94 3e 8c 31 d6 14 cd 8a 23 f1 3f 84 Input V: 00000000: 48 89 3b 71 bc e4 00 b6 5e 21 ba 37 8a 0a d5 70 tmp stage 0: 00000000: e7 b3 be 78 2a 23 fa 62 d7 1d 4a fb b0 e9 22 fc tmp stage 1: 00000000: 80 6b 3a 8c 23 ae 8f 53 be 71 4c 16 fc 13 b2 ea tmp stage 2: 00000000: 2a 4d e1 2a 0b 58 8e e6 36 b8 9c 0a 26 22 b8 30 Returning new block for context ffff810033fb2b10 Output DT: 00000000: e8 b3 be 78 2a 23 fa 62 d7 1d 4a fb b0 e9 22 fc Output I: 00000000: c8 e2 01 fd 9f 4a 8f e5 e0 50 f6 21 76 19 67 9a Output V: 00000000: ba 98 e3 75 c0 1b 81 8d 03 d6 f8 e2 0c c6 54 4b New Random Data: 00000000: e2 af e0 d7 94 12 01 03 d6 e8 6a 2b 50 3b df aa returning 16 from get_prng_bytes in context ffff810033fb2b10 ----8<---- The expected result is there, in the first "New Random Data", but we're incorrectly making a second call to _get_more_prng_bytes, due to some checks that are slightly off, which resulted in our original bytes never being returned anywhere. One approach to fixing this would be to alter some byte_count checks in get_prng_bytes, but it would mean the last DEFAULT_BLK_SZ bytes would be copied a byte at a time, rather than in a single memcpy, so a slightly more involved, equally functional, and ultimately more efficient way of fixing this was suggested to me by Neil, which I'm submitting here. All of the RNGVS ANSI X9.31 AES128 VST test vectors I've passed through ansi_cprng are now returning the expected results with this change. Signed-off-by:
-
Julia Lawall authored
ARRAY_SIZE is more concise to use when the size of an array is divided by the size of its type or the size of its first element. The semantic patch that makes this change is as follows: (http://www.emn.fr/x-info/coccinelle/) // <smpl> @i@ @@ #include <linux/kernel.h> @depends on i using "paren.iso"@ type T; T[] E; @@ - (sizeof(E)/sizeof(T)) + ARRAY_SIZE(E) // </smpl> Signed-off-by:
Julia Lawall <julia@diku.dk> Signed-off-by:
-
Herbert Xu authored
The bnx2x driver actually uses the crc32c_le name so this patch restores the crc32c_le symbol through a macro. Signed-off-by: -
Adrian-Ken Rueegsegger authored
The latest shash changes leave crc32c undefined: [...] Building modules, stage 2. MODPOST 1381 modules ERROR: "crc32c" [net/sctp/sctp.ko] undefined! ERROR: "crc32c" [net/ipv4/netfilter/nf_nat_proto_sctp.ko] undefined! Adding EXPORT_SYMBOL(crc32c) to lib/libcrc32c.c fixes the compile error. This patch has been compile-tested only. Signed-off-by:
Adrian-Ken Rueegsegger <rueegsegger@swiss-it.ch> Signed-off-by:
-
Herbert Xu authored
This patch swaps the role of libcrc32c and crc32c. Previously the implementation was in libcrc32c and crc32c was a wrapper. Now the code is in crc32c and libcrc32c just calls the crypto layer. The reason for the change is to tap into the algorithm selection capability of the crypto API so that optimised implementations such as the one utilising Intel's CRC32C instruction can be used where available. Signed-off-by: -
Herbert Xu authored
This patch adds a test for the requirement that all crc32c algorithms shall store the partial result in the first four bytes of the descriptor context. Signed-off-by: -
Herbert Xu authored
This patch changes crc32c-intel to the new shash interface. Signed-off-by: -
Herbert Xu authored
This patch changes crc32c to the new shash interface. Signed-off-by: -
Herbert Xu authored
This patch allows shash algorithms to be used through the old hash interface. This is a transitional measure so we can convert the underlying algorithms to shash before converting the users across. Signed-off-by: -
Herbert Xu authored
This patch makes /proc/crypto call the type-specific show function if one is present before calling the legacy show functions for cipher/digest/compress. This allows us to reuse the type values for those legacy types. In particular, hash and digest will share one type value while shash is phased in as the default hash type. Signed-off-by: -
Herbert Xu authored
It is often useful to save the partial state of a hash function so that it can be used as a base for two or more computations. The most prominent example is HMAC where all hashes start from a base determined by the key. Having an import/export interface means that we only have to compute that base once rather than for each message. Signed-off-by:
-
