1. 10 Jun, 2009 6 commits
  2. 09 Jun, 2009 16 commits
    • Jan Kara's avatar
      jbd: fix race in buffer processing in commit code · a61d90d7
      Jan Kara authored
      In commit code, we scan buffers attached to a transaction.  During this
      scan, we sometimes have to drop j_list_lock and then we recheck whether
      the journal buffer head didn't get freed by journal_try_to_free_buffers().
       But checking for buffer_jbd(bh) isn't enough because a new journal head
      could get attached to our buffer head.  So add a check whether the journal
      head remained the same and whether it's still at the same transaction and
      list.
      
      This is a nasty bug and can cause problems like memory corruption (use after
      free) or trigger various assertions in JBD code (observed).
      Signed-off-by: default avatarJan Kara <jack@suse.cz>
      Cc: <stable@kernel.org>
      Cc: <linux-ext4@vger.kernel.org>
      Signed-off-by: default avatarAndrew Morton <akpm@linux-foundation.org>
      Signed-off-by: default avatarLinus Torvalds <torvalds@linux-foundation.org>
      a61d90d7
    • Ian Kent's avatar
      autofs4: remove hashed check in validate_wait() · 463aea1a
      Ian Kent authored
      The recent ->lookup() deadlock correction required the directory inode
      mutex to be dropped while waiting for expire completion.  We were
      concerned about side effects from this change and one has been identified.
      
      I saw several error messages.
      
      They cause autofs to become quite confused and don't really point to the
      actual problem.
      
      Things like:
      
      handle_packet_missing_direct:1376: can't find map entry for (43,1827932)
      
      which is usually totally fatal (although in this case it wouldn't be
      except that I treat is as such because it normally is).
      
      do_mount_direct: direct trigger not valid or already mounted
      /test/nested/g3c/s1/ss1
      
      which is recoverable, however if this problem is at play it can cause
      autofs to become quite confused as to the dependencies in the mount tree
      because mount triggers end up mounted multiple times.  It's hard to
      accurately check for this over mounting case and automount shouldn't need
      to if the kernel module is doing its job.
      
      There was one other message, similar in consequence of this last one but I
      can't locate a log example just now.
      
      When checking if a mount has already completed prior to adding a new mount
      request to the wait queue we check if the dentry is hashed and, if so, if
      it is a mount point.  But, if a mount successfully completed while we
      slept on the wait queue mutex the dentry must exist for the mount to have
      completed so the test is not really needed.
      
      Mounts can also be done on top of a global root dentry, so for the above
      case, where a mount request completes and the wait queue entry has already
      been removed, the hashed test returning false can cause an incorrect
      callback to the daemon.  Also, d_mountpoint() is not sufficient to check
      if a mount has completed for the multi-mount case when we don't have a
      real mount at the base of the tree.
      Signed-off-by: default avatarIan Kent <raven@themaw.net>
      Signed-off-by: default avatarAndrew Morton <akpm@linux-foundation.org>
      Signed-off-by: default avatarLinus Torvalds <torvalds@linux-foundation.org>
      463aea1a
    • Mike Frysinger's avatar
      shm: fix unused warnings on nommu · 586c7e6a
      Mike Frysinger authored
      The massive nommu update (8feae131) resulted in these warnings:
      ipc/shm.c: In function `sys_shmdt':
      ipc/shm.c:974: warning: unused variable `size'
      ipc/shm.c:972: warning: unused variable `next'
      Signed-off-by: default avatarMike Frysinger <vapier@gentoo.org>
      Cc: David Howells <dhowells@redhat.com>
      Signed-off-by: default avatarAndrew Morton <akpm@linux-foundation.org>
      Signed-off-by: default avatarLinus Torvalds <torvalds@linux-foundation.org>
      586c7e6a
    • Linus Torvalds's avatar
      Merge git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux-2.6-for-linus · 13df635f
      Linus Torvalds authored
      * git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux-2.6-for-linus:
        kvm: fix kvm reboot crash when MAXSMP is used
        cpumask: alloc zeroed cpumask for static cpumask_var_ts
        cpumask: introduce zalloc_cpumask_var
      13df635f
    • Linus Torvalds's avatar
      Merge branch 'for-linus' of git://git.kernel.dk/linux-2.6-block · 9cdba302
      Linus Torvalds authored
      * 'for-linus' of git://git.kernel.dk/linux-2.6-block:
        bsg: setting rq->bio to NULL
      9cdba302
    • Linus Torvalds's avatar
      Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6 · fd4d3429
      Linus Torvalds authored
      * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6:
        cls_cgroup: Fix oops when user send improperly 'tc filter add' request
        r8169: fix crash when large packets are received
      fd4d3429
    • Linus Torvalds's avatar
      Merge branch 'for-linus' of git://neil.brown.name/md · 4d11eff6
      Linus Torvalds authored
      * 'for-linus' of git://neil.brown.name/md:
        md/raid5: fix bug in reshape code when chunk_size decreases.
        md/raid5 - avoid deadlocks in get_active_stripe during reshape
        md/raid5: use conf->raid_disks in preference to mddev->raid_disk
      4d11eff6
    • FUJITA Tomonori's avatar
      bsg: setting rq->bio to NULL · c1d4c41f
      FUJITA Tomonori authored
      Due to commit 1cd96c24 ("block: WARN
      in __blk_put_request() for potential bio leak"), BSG SMP requests get
      the false warnings:
      
      WARNING: at block/blk-core.c:1068 __blk_put_request+0x52/0xc0()
      
      This sets rq->bio to NULL to avoid that false warnings.
      Signed-off-by: default avatarFUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
      Signed-off-by: default avatarJens Axboe <jens.axboe@oracle.com>
      c1d4c41f
    • Avi Kivity's avatar
      kvm: fix kvm reboot crash when MAXSMP is used · 8437a617
      Avi Kivity authored
      one system was found there is crash during reboot then kvm/MAXSMP
      Sending all processes the KILL signal...                              done
      Please stand by while rebooting the system...
      [ 1721.856538] md: stopping all md devices.
      [ 1722.852139] kvm: exiting hardware virtualization
      [ 1722.854601] BUG: unable to handle kernel NULL pointer dereference at (null)
      [ 1722.872219] IP: [<ffffffff8102c6b6>] hardware_disable+0x4c/0xb4
      [ 1722.877955] PGD 0
      [ 1722.880042] Oops: 0000 [#1] SMP
      [ 1722.892548] last sysfs file: /sys/devices/pci0000:00/0000:00:01.0/0000:01:00.0/host0/target0:2:0/0:2:0:0/vendor
      [ 1722.900977] CPU 9
      [ 1722.912606] Modules linked in:
      [ 1722.914226] Pid: 0, comm: swapper Not tainted 2.6.30-rc7-tip-01843-g2305324-dirty #299 ...
      [ 1722.932589] RIP: 0010:[<ffffffff8102c6b6>]  [<ffffffff8102c6b6>] hardware_disable+0x4c/0xb4
      [ 1722.942709] RSP: 0018:ffffc900010b6ed8  EFLAGS: 00010046
      [ 1722.956121] RAX: 0000000000000000 RBX: ffffc9000e253140 RCX: 0000000000000009
      [ 1722.972202] RDX: 000000000000b020 RSI: ffffc900010c3220 RDI: ffffffffffffd790
      [ 1722.977399] RBP: ffffc900010b6f08 R08: 0000000000000000 R09: 0000000000000000
      [ 1722.995149] R10: 00000000000004b8 R11: 966912b6c78fddbd R12: 0000000000000009
      [ 1723.011551] R13: 000000000000b020 R14: 0000000000000009 R15: 0000000000000000
      [ 1723.019898] FS:  0000000000000000(0000) GS:ffffc900010b3000(0000) knlGS:0000000000000000
      [ 1723.034389] CS:  0010 DS: 0018 ES: 0018 CR0: 000000008005003b
      [ 1723.041164] CR2: 0000000000000000 CR3: 0000000001001000 CR4: 00000000000006e0
      [ 1723.056192] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
      [ 1723.072546] DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400
      [ 1723.080562] Process swapper (pid: 0, threadinfo ffff88107e464000, task ffff88047e5a2550)
      [ 1723.096144] Stack:
      [ 1723.099071]  0000000000000046 ffffc9000e253168 966912b6c78fddbd ffffc9000e253140
      [ 1723.115471]  ffff880c7d4304d0 ffffc9000e253168 ffffc900010b6f28 ffffffff81011022
      [ 1723.132428]  ffffc900010b6f48 966912b6c78fddbd ffffc900010b6f48 ffffffff8100b83b
      [ 1723.141973] Call Trace:
      [ 1723.142981]  <IRQ> <0> [<ffffffff81011022>] kvm_arch_hardware_disable+0x26/0x3c
      [ 1723.158153]  [<ffffffff8100b83b>] hardware_disable+0x3f/0x55
      [ 1723.172168]  [<ffffffff810b95f6>] generic_smp_call_function_interrupt+0x76/0x13c
      [ 1723.178836]  [<ffffffff8104cbea>] smp_call_function_interrupt+0x3a/0x5e
      [ 1723.194689]  [<ffffffff81035bf3>] call_function_interrupt+0x13/0x20
      [ 1723.199750]  <EOI> <0> [<ffffffff814ad3b4>] ? acpi_idle_enter_c1+0xd3/0xf4
      [ 1723.217508]  [<ffffffff814ad3ae>] ? acpi_idle_enter_c1+0xcd/0xf4
      [ 1723.232172]  [<ffffffff814ad4bc>] ? acpi_idle_enter_bm+0xe7/0x2ce
      [ 1723.235141]  [<ffffffff81a8d93f>] ? __atomic_notifier_call_chain+0x0/0xac
      [ 1723.253381]  [<ffffffff818c3dff>] ? menu_select+0x58/0xd2
      [ 1723.258179]  [<ffffffff818c2c9d>] ? cpuidle_idle_call+0xa4/0xf3
      [ 1723.272828]  [<ffffffff81034085>] ? cpu_idle+0xb8/0x101
      [ 1723.277085]  [<ffffffff81a80163>] ? start_secondary+0x1bc/0x1d7
      [ 1723.293708] Code: b0 00 00 65 48 8b 04 25 28 00 00 00 48 89 45 e0 31 c0 48 8b 04 cd 30 ee 27 82 49 89 cc 49 89 d5 48 8b 04 10 48 8d b8 90 d7 ff ff <48> 8b 87 70 28 00 00 48 8d 98 90 d7 ff ff eb 16 e8 e9 fe ff ff
      [ 1723.335524] RIP  [<ffffffff8102c6b6>] hardware_disable+0x4c/0xb4
      [ 1723.342076]  RSP <ffffc900010b6ed8>
      [ 1723.352021] CR2: 0000000000000000
      [ 1723.354348] ---[ end trace e2aec53dae150aa1 ]---
      
      it turns out that we need clear cpus_hardware_enabled in that case.
      Reported-and-tested-by: default avatarYinghai Lu <yinghai@kernel.org>
      Signed-off-by: default avatarYinghai Lu <yinghai@kernel.org>
      Signed-off-by: default avatarRusty Russell <rusty@rustcorp.com.au>
      8437a617
    • Yinghai Lu's avatar
      cpumask: alloc zeroed cpumask for static cpumask_var_ts · eaa95840
      Yinghai Lu authored
      These are defined as static cpumask_var_t so if MAXSMP is not used,
      they are cleared already.  Avoid surprises when MAXSMP is enabled.
      Signed-off-by: default avatarYinghai Lu <yinghai.lu@kernel.org>
      Signed-off-by: default avatarRusty Russell <rusty@rustcorp.com.au>
      eaa95840
    • Yinghai Lu's avatar
      cpumask: introduce zalloc_cpumask_var · 0281b5dc
      Yinghai Lu authored
      So can get cpumask_var with cpumask_clear
      Signed-off-by: default avatarYinghai Lu <yinghai@kernel.org>
      Signed-off-by: default avatarRusty Russell <rusty@rustcorp.com.au>
      0281b5dc
    • Minoru Usui's avatar
      cls_cgroup: Fix oops when user send improperly 'tc filter add' request · 52ea3a56
      Minoru Usui authored
      I found a bug in cls_cgroup_change() in cls_cgroup.c.
      cls_cgroup_change() expected tca[TCA_OPTIONS] was set from user space properly,
      but tc in iproute2-2.6.29-1 (which I used) didn't set it.
      
      In the current source code of tc in git, it set tca[TCA_OPTIONS].
      
        git://git.kernel.org/pub/scm/linux/kernel/git/shemminger/iproute2.git
      
      If we always use a newest iproute2 in git when we use cls_cgroup, 
      we don't face this oops probably.
      But I think, kernel shouldn't panic regardless of use program's behaviour. 
      Signed-off-by: default avatarMinoru Usui <usui@mxm.nes.nec.co.jp>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      52ea3a56
    • Eric Dumazet's avatar
      r8169: fix crash when large packets are received · fdd7b4c3
      Eric Dumazet authored
      Michael Tokarev reported receiving a large packet could crash
      a machine with RTL8169 NIC.
      ( original thread at http://lkml.org/lkml/2009/6/8/192 )
      
      Problem is this driver tells that NIC frames up to 16383 bytes
      can be received but provides skb to rx ring allocated with
      smaller sizes (1536 bytes in case standard 1500 bytes MTU is used)
      
      When a frame larger than what was allocated by driver is received,
      dma transfert can occurs past the end of buffer and corrupt
      kernel memory.
      
      Fix is to tell to NIC what is the maximum size a frame can be.
      
      This bug is very old, (before git introduction, linux-2.6.10), and 
      should be backported to stable versions.
      Reported-by: default avatarMichael Tokarev <mjt@tls.msk.ru>
      Signed-off-by: default avatarEric Dumazet <eric.dumazet@gmail.com>
      Tested-by: default avatarMichael Tokarev <mjt@tls.msk.ru>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      fdd7b4c3
    • NeilBrown's avatar
      md/raid5: fix bug in reshape code when chunk_size decreases. · 0e6e0271
      NeilBrown authored
      Now that we support changing the chunksize, we calculate
      "reshape_sectors" to be the max of number of sectors in old
      and new chunk size.
      However there is one please where we still use 'chunksize'
      rather than 'reshape_sectors'.
      This causes a reshape that reduces the size of chunks to freeze.
      Signed-off-by: default avatarNeilBrown <neilb@suse.de>
      0e6e0271
    • NeilBrown's avatar
      md/raid5 - avoid deadlocks in get_active_stripe during reshape · a8c906ca
      NeilBrown authored
      md has functionality to 'quiesce' and array so that all pending
      IO completed and no new IO starts.  This is used to achieve a
      stable state before making internal changes.
      
      Currently this quiescing applies equally to normal IO, resync
      IO, and reshape IO.
      However there is a problem with applying it to reshape IO.
      Reshape can have multiple 'stripe_heads' that must be active together.
      If the quiesce come between allocating the first and the last of
      such a collection, then we deadlock, as the last will not be allocated
      until the quiesce is lifted, the quiesce will not be lifted until the
      first (which has been allocated) gets used, and that first cannot be
      used until the last is allocated.
      
      It is not necessary to inhibit reshape IO when a quiesce is
      requested.  Those places in the code that require a full quiesce will
      ensure the reshape thread is not running at all.
      
      So allow reshape requests to get access to new stripe_heads without
      being blocked by a 'quiesce'.
      
      This only affects in-place reshapes (i.e. where the array does not
      grow or shrink) and these are only newly supported.  So this patch is
      not needed in earlier kernels.
      Signed-off-by: default avatarNeilBrown <neilb@suse.de>
      a8c906ca
    • NeilBrown's avatar
      md/raid5: use conf->raid_disks in preference to mddev->raid_disk · f001a70c
      NeilBrown authored
      mddev->raid_disks can be changed and any time by a request from
      user-space.  It is a suggestion as to what number of raid_disks is
      desired.
      
      conf->raid_disks can only be changed by the raid5 module with suitable
      locks in place.  It is a statement as to the current number of
      raid_disks.
      
      There are two places where the latter should be used, but the former
      is used.  This can lead to a crash when reshaping an array.
      
      This patch changes to mddev-> to conf->
      Signed-off-by: default avatarNeilBrown <neilb@suse.de>
      f001a70c
  3. 08 Jun, 2009 14 commits
  4. 07 Jun, 2009 4 commits
    • Alessandro Rubini's avatar
      [ARM] 5543/1: arm: serial amba: add missing declaration in serial.h · aa853f85
      Alessandro Rubini authored
      This header is sometimes included in the uncompress stage to get
      register values, but no <linux/amba/bus.h> can be included there.
      So declare "struct amba_device" here before using it in a prototype.
      Signed-off-by: default avatarAlessandro Rubini <rubini@unipv.it>
      Acked-by: default avatarAndrea Gallo <andrea.gallo@stericsson.com>
      Signed-off-by: default avatarRussell King <rmk+kernel@arm.linux.org.uk>
      aa853f85
    • Cyrill Gorcunov's avatar
      x86, apic: Fix dummy apic read operation together with broken MP handling · 103428e5
      Cyrill Gorcunov authored
      Ingo Molnar reported that read_apic is buggy novadays:
      
      [    0.000000] Using APIC driver default
      [    0.000000] SMP: Allowing 1 CPUs, 0 hotplug CPUs
      [    0.000000] Local APIC disabled by BIOS -- you can enable it with "lapic"
      [    0.000000] APIC: disable apic facility
      [    0.000000] ------------[ cut here ]------------
      [    0.000000] WARNING: at arch/x86/kernel/apic/apic.c:254 native_apic_read_dummy+0x2d/0x3b()
      [    0.000000] Hardware name: HP OmniBook PC
      
      Indeed we still rely on apic->read operation for SMP compiled
      kernel. And instead of disfigure the SMP code with #ifdef we
      allow to call apic->read. To capture any unexpected results
      we check for apic->read being called for sane reason via
      WARN_ON_ONCE but(!) instead of OR we should use AND logical
      operation (thanks Yinghai for spotting the root of the problem).
      
      Along with that we could be have bad MP table and we are
      to fix it that way no SMP started and no complains about
      BIOS bug if apic was just disabled via command line.
      Signed-off-by: default avatarCyrill Gorcunov <gorcunov@openvz.org>
      Cc: Yinghai Lu <yinghai@kernel.org>
      LKML-Reference: <20090607124840.GD4547@lenovo>
      Signed-off-by: default avatarIngo Molnar <mingo@elte.hu>
      103428e5
    • Sergei Shtylyov's avatar
      pdc202xx_old: fix resetproc() method · 669165da
      Sergei Shtylyov authored
      pdc202xx_reset() calls pdc202xx_reset_host() twice, for both channels, while
      that function actually twiddles the single, shared software reset bit -- the
      net effect is a duplicated reset and horrendous 4 second delay happening not
      only on a channel reset but also when dma_lost_irq() and dma_clear() methods
      are called.  Fold pdc202xx_reset_host() into pdc202xx_reset(), fix printk(),
      and move it before the actual reset...
      Signed-off-by: default avatarSergei Shtylyov <sshtylyov@ru.mvista.com>
      Signed-off-by: default avatarBartlomiej Zolnierkiewicz <bzolnier@gmail.com>
      669165da
    • Sergei Shtylyov's avatar
      pdc202xx_old: fix 'pdc20246_dma_ops' · 521a415c
      Sergei Shtylyov authored
      Commit ac95beed (ide: add struct ide_port_ops
      (take 2)) erroneously converted the driver's dma_timeout() and dma_lost_irq()
      methods to call the driver's resetproc() method regardless of whether it was
      defined for this specific controller while it hadn't been defined and hence
      called for PDC20246. So the dma_clear() method, the successor of dma_timeout(),
      shouldn't exist and the dma_lost_irq() method should be standard for PDC20246.
      Signed-off-by: default avatarSergei Shtylyov <sshtylyov@ru.mvista.com>
      Signed-off-by: default avatarBartlomiej Zolnierkiewicz <bzolnier@gmail.com>
      521a415c