- 29 Jun, 2020 5 commits
-
-
Dan Murphy authored
Add a property to configure the slot for the voltage sense monitoring of the device. Vsense data will be sent to the processor via the slot defined by the property Signed-off-by:
Dan Murphy <dmurphy@ti.com> Link: https://lore.kernel.org/r/20200626154143.20351-2-dmurphy@ti.comSigned-off-by:
Mark Brown <broonie@kernel.org>
-
Dan Murphy authored
Add Vsense slot configuration based on the device tree. Adding this property enables the slot programming to be moved to the tdm_set_slot callback. This in affect sets the slots for the Isense and Vsense and enabling this these modes are now based on whether these features were powered on or not. Signed-off-by:
-
Dan Murphy authored
Add programming for the tdm slots for the right and left. This also requires configuring the RX/TX offsets for the DAI format type. Signed-off-by:
-
Randy Dunlap authored
sound/soc/soc-io.c was merged into sound/soc/soc-component.c, so fixup the Documentation to use the updated file name. Error: Cannot open file ../sound/soc/soc-io.c WARNING: kernel-doc '../scripts/kernel-doc -rst -enable-lineno ../sound/soc/soc-io.c' failed with return code 1 Fixes: 460b42d1 ("ASoC: soc-component: merge soc-io.c into soc-component.c") Signed-off-by:
Randy Dunlap <rdunlap@infradead.org> Acked-by:
Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Cc: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Cc: Mark Brown <broonie@kernel.org> Link: https://lore.kernel.org/r/a9f59f30-8cf2-ea82-567c-1706fd64fe62@infradead.orgSigned-off-by:
-
Rohit kumar authored
Add support for 384KHz sample rate and S24_3LE bitwidth for dummy dai. Signed-off-by:
Rohit kumar <rohitkr@codeaurora.org> Link: https://lore.kernel.org/r/1593265030-1451-1-git-send-email-rohitkr@codeaurora.orgSigned-off-by:
-
- 26 Jun, 2020 19 commits
-
-
Naveen Manohar authored
Add max98373-sdw helper function, which configures 2x MAX98373 codecs to Link1. This patch shares code between the I2S and SoundWire modes of MAX98373 and adds the trigger already added for I2S. Signed-off-by:
Rander Wang <rander.wang@linux.intel.com> Signed-off-by:
Naveen Manohar <naveen.m@intel.com> Signed-off-by:
Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Reviewed-by:
Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com> Link: https://lore.kernel.org/r/20200625192620.4312-1-pierre-louis.bossart@linux.intel.comSigned-off-by:
-
Masanari Iida authored
This patch fixes a spelling typo in samsung/Kconfig. Signed-off-by:
Masanari Iida <standby24x7@gmail.com> Link: https://lore.kernel.org/r/20200626142958.253614-1-standby24x7@gmail.comSigned-off-by:
-
Naveen Manohar authored
RT5682 is in Soundwire mode on Link0 & 2x MAX98373 on link1. Signed-off-by:
-
Fred Oh authored
dailink.codecs is pointer to a codec array. Explicitly access first codec's dai_name. Signed-off-by:
Fred Oh <fred.oh@linux.intel.com> Signed-off-by:
Ranjani Sridharan <ranjani.sridharan@linux.intel.com> Reviewed-by:
Bard Liao <yung-chuan.liao@linux.intel.com> Reviewed-by:
-
Mark Brown authored
Merge series "ASoC: Intel: machine driver updates for 5.9" from Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>: This patchset adds: a) fixes for missing .owner = THIS_MODULE initializations for snd_soc_card structures b) extensions for TigerLake and JasperLake reusing the same machine drivers. c) Max98373 support for SoundWire machine driver. d) cleanups (use-after-free, quirks, etc). Bard Liao (1): ASoC: intel: cml_rt1011_rt5682: use for_each_card_prelinks Dharageswari R (3): ASoC: Intel: Boards: tgl_max98373: add dai_trigger function ASoC: Intel: Boards: tgl_max98373: Fix the comment for max_98373_components ASoC: Intel: Boards: tgl_max98373: Update TDM configuration in hw_params Fred Oh (3): ASoC: Intel: Boards: cml_rt1011_rt5682: reduce log level for printing quirk ASoC: Intel: Boards: cml_rt1011_rt5682: use statically define codec config ASoc: Intel: cml_rt1011_rt5682: explicitly access first codec Naveen Manohar (2): ASoC: Intel: sof_sdw: Add MAX98373 support ASoC: Intel: common: add match table for TGL MAX98373 + RT5682 SoundWire driver Pierre-Louis Bossart (6): ASoC: SOF: nocodec: add missing .owner field ASoC: Intel: cml_rt1011_rt5682: add missing .owner field ASoC: Intel: sof_sdw: add missing .owner field ASoC: Intel: bxt_rt298: add missing .owner field ASoC: Intel: sof_sdw: add quirk override with kernel parameter ASoC: Intel: boards: byt*.c: remove cast in dev_info quirk log Yong Zhi (1): ASoC: intel: sof_rt5682: Add support for jsl-max98360a-rt5682 randerwang (1): ASoC: Intel: sdw_max98373: add card_late_probe support sound/soc/intel/boards/Kconfig | 3 +- sound/soc/intel/boards/Makefile | 2 + sound/soc/intel/boards/bxt_rt298.c | 2 + sound/soc/intel/boards/bytcht_es8316.c | 5 +- sound/soc/intel/boards/bytcr_rt5640.c | 4 +- sound/soc/intel/boards/bytcr_rt5651.c | 4 +- sound/soc/intel/boards/cml_rt1011_rt5682.c | 90 ++++++------------- sound/soc/intel/boards/sof_maxim_common.c | 55 ++++++++++-- sound/soc/intel/boards/sof_maxim_common.h | 3 + sound/soc/intel/boards/sof_rt5682.c | 32 +++++++ sound/soc/intel/boards/sof_sdw.c | 72 ++++++++++++++- sound/soc/intel/boards/sof_sdw_common.h | 15 ++++ sound/soc/intel/boards/sof_sdw_max98373.c | 86 ++++++++++++++++++ .../intel/common/soc-acpi-intel-jsl-match.c | 13 +++ .../intel/common/soc-acpi-intel-tgl-match.c | 25 ++++++ sound/soc/sof/nocodec.c | 1 + 16 files changed, 332 insertions(+), 80 deletions(-) create mode 100644 sound/soc/intel/boards/sof_sdw_max98373.c base-commit: 6f81e520 -- 2.20.1 -
Colton Lewis authored
Silence documentation build warning by correcting kernel-doc comment for snd_soc_runtime_action. ./sound/soc/soc-pcm.c:220: warning: Function parameter or member 'action' not described in 'snd_soc_runtime_action' Signed-off-by:
Colton Lewis <colton.w.lewis@protonmail.com> Link: https://lore.kernel.org/r/20200626053953.68797-1-colton.w.lewis@protonmail.comSigned-off-by:
-
Dharageswari R authored
This patch updates tx_mask, so that (0-3)slots are reserved for Maxim amps to feedback data. V0->slot0, I0->slot1, V1->slot2, I1->slot3. also update slot_width in tdm configuration to 24 as the BE configuration is 24 in topology. Signed-off-by:
Dharageswari R <dharageswari.r@intel.com> Signed-off-by:
-
Bard Liao authored
for_each_card_prelinks() is a common API to walk through each prelink in the card. Signed-off-by:
-
Fred Oh authored
When the cml_rt1011_rt5682_dailink[].codecs pointer is overridden by a quirk with a devm allocated structure and the probe is deferred, in the next probe we will see an use-after-free condition (verified with KASAN). This can be avoided by using statically allocated configurations - which simplifies the code quite a bit as well. KASAN issue fixed. [ 23.301373] cml_rt1011_rt5682 cml_rt1011_rt5682: sof_rt1011_quirk = f [ 23.301875] ================================================================== [ 23.302018] BUG: KASAN: use-after-free in snd_cml_rt1011_probe+0x23a/0x3d0 [snd_soc_cml_rt1011_rt5682] [ 23.302178] Read of size 8 at addr ffff8881ec6acae0 by task kworker/0:2/105 [ 23.302320] CPU: 0 PID: 105 Comm: kworker/0:2 Not tainted 5.7.0-rc7-test+ #3 [ 23.302322] Hardware name: Google Helios/Helios, BIOS 01/21/2020 [ 23.302329] Workqueue: events deferred_probe_work_func [ 23.302331] Call Trace: [ 23.302339] dump_stack+0x76/0xa0 [ 23.302345] print_address_description.constprop.0.cold+0xd3/0x43e [ 23.302351] ? _raw_spin_lock_irqsave+0x7b/0xd0 [ 23.302355] ? _raw_spin_trylock_bh+0xf0/0xf0 [ 23.302362] ? snd_cml_rt1011_probe+0x23a/0x3d0 [snd_soc_cml_rt1011_rt5682] [ 23.302365] __kasan_report.cold+0x37/0x86 [ 23.302371] ? snd_cml_rt1011_probe+0x23a/0x3d0 [snd_soc_cml_rt1011_rt5682] [ 23.302375] kasan_report+0x38/0x50 [ 23.302382] snd_cml_rt1011_probe+0x23a/0x3d0 [snd_soc_cml_rt1011_rt5682] [ 23.302389] platform_drv_probe+0x66/0xc0 Fixes: 629ba12e ("ASoC: Intel: boards: split woofer and tweeter support") Suggested-by:
-
Fred Oh authored
Change dev_info to dev_dbg to reduce noise during multiple deferred probes. Signed-off-by:
-
Yong Zhi authored
Add support for max98360a speaker amp on SSP1 and ALC5682 on SSP0 for jsl+ platform. Signed-off-by:
Yong Zhi <yong.zhi@intel.com> Signed-off-by:
Kai Vehmanen <kai.vehmanen@linux.intel.com> Link: https://lore.kernel.org/r/20200625191308.3322-10-pierre-louis.bossart@linux.intel.comSigned-off-by:
-
Dharageswari R authored
MAX_98373_DEV0_NAME is the Right speaker and MAX_98373_DEV1_NAME is the Left speaker, hence updating the comments for max98373 dailink components accordingly. Signed-off-by:
-
Dharageswari R authored
Speaker amplifier feedback is not modeled as being dependent on any active output. Even when there is no playback happening, parts of the graph, specifically the IV sense->speaker protection->output remains active and this prevents the DSP from entering low-power states. This patch suggests a machine driver level approach where the speaker pins are enabled/disabled dynamically depending on stream start/stop events. DPAM graph representations show the feedback loop is indeed disabled and low-power states can be reached. Signed-off-by:
-
Pierre-Louis Bossart authored
We don't need an explicit cast, using the right format is simple enough. Suggested-by:
-
Pierre-Louis Bossart authored
During the bring-up of new platforms, or to take care of specific hardware reworks, it's useful to add a kernel parameter to override the default DMI-based quirks. For example, adding the following line in a .conf file in /etc/modprobe.d/ will change the default quirk and log the changes if dynamic debug is enabled. options snd_soc_sof_sdw quirk=0x802 [ 735.025785] sof_sdw sof_sdw: Overriding quirk 0x10 => 0x802 [ 735.025787] sof_sdw sof_sdw: quirk realtek,jack-detect-source 2 [ 735.025790] sof_sdw sof_sdw: quirk SOF_RT715_DAI_ID_FIX enabled Tested on ICL RVP with add-on board instead of default codec. Signed-off-by:
-
Pierre-Louis Bossart authored
This field is required for ASoC cards. Not setting it will result in a module->name pointer being NULL and generate problems such as cat /proc/asound/modules 0 (efault) Fixes: 76016322 ('ASoC: Intel: Add Broxton-P machine driver') Reported-by:
Jaroslav Kysela <perex@perex.cz> Suggested-by:
Takashi Iwai <tiwai@suse.de> Signed-off-by:
-
Pierre-Louis Bossart authored
This field is required for ASoC cards. Not setting it will result in a module->name pointer being NULL and generate problems such as cat /proc/asound/modules 0 (efault) Fixes: 52db12d1 ('ASoC: Intel: boards: add sof_sdw machine driver') Reported-by:
-
Pierre-Louis Bossart authored
This field is required for ASoC cards. Not setting it will result in a module->name pointer being NULL and generate problems such as cat /proc/asound/modules 0 (efault) Fixes: 17fe95d6 ('ASoC: Intel: boards: Add CML m/c using RT1011 and RT5682') Reported-by:
-
Pierre-Louis Bossart authored
This field is required for ASoC cards. Not setting it will result in a module->name pointer being NULL and generate problems such as cat /proc/asound/modules 0 (efault) Fixes: 8017b8fd ('ASoC: SOF: Add Nocodec machine driver support') Reported-by:
-
- 25 Jun, 2020 6 commits
-
-
Tzung-Bi Shih authored
To fix compilation error: error: implicit declaration of function 'ACPI_PTR' [-Werror,-Wimplicit-function-declaration] .acpi_match_table = ACPI_PTR(rt1015_acpi_match), ^ Adds the missing header "acpi.h" inclusion and sorts in alphabetical. Signed-off-by:Tzung-Bi Shih <tzungbi@google.com> Link: https://lore.kernel.org/r/20200625153543.85039-4-tzungbi@google.comSigned-off-by:
-
Tzung-Bi Shih authored
To fix compilation warnings: - struct 'snd_soc_pcm_runtime' declared inside parameter list will not be visible outside of this definition or declaration - struct 'soc_enum' declared inside parameter list will not be visible outside of this definition or declaration Declares the missing structure prototypes. Signed-off-by:
-
Tzung-Bi Shih authored
To fix compilation error: - error: field 'XXX' has incomplete type Moves definition of enum snd_soc_bias_level from soc.h to soc-dapm.h. Signed-off-by:
-
Dan Murphy authored
Fix the shut-down gpio property to be shut-down-gpio and fix the example. Signed-off-by:
-
Dan Murphy authored
Fix the issue found that there is an extra space before a comma in the volume control. Fixes: bf726b1c ("ASoC: tas2562: Add support for digital volume control") Signed-off-by:
-
Dan Murphy authored
Update the shutdown GPIO property to be shutdown from shut-down. Fixes: c173dba4 ("ASoC: tas2562: Introduce the TAS2562 amplifier") Signed-off-by:
-
- 24 Jun, 2020 2 commits
-
-
Shengjiu Wang authored
In order to support wm8524 codec with fsl-asoc-card machine driver, add compatible string "fsl,imx-audio-wm8524". Signed-off-by:
Shengjiu Wang <shengjiu.wang@nxp.com> Acked-by:
Nicolin Chen <nicoleotsuka@gmail.com> Link: https://lore.kernel.org/r/1592895167-30483-2-git-send-email-shengjiu.wang@nxp.comSigned-off-by:
-
Shengjiu Wang authored
WM8524 only supports playback mode, and only works at slave mode. Signed-off-by:
-
- 23 Jun, 2020 8 commits
-
-
Mark Brown authored
Merge series "ASoC: add dailink .exit() callback" from Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>: While looking at reboot issues and module load/unload tests, I found out some resources allocated in the dailink .init() callback are not properly released - there is no existing mechanism in the soc-core to do so. The addition of a dailink .exit() callback seems to be the simplest solution overall. It can be argued that the existing machine platform device .remove() callback can also perform the necessary cleanups, however as shown in the last two examples this might require a loop to identify components whereas the dailink .exit() already has all the necessary information to revert the actions done in the .init() step. Changes since RFC: Better commit messages and explanations rt5682 cases with snd_soc_component_set_jack() called in the .exit() Fred Oh (2): ASoC: intel: sof_rt5682: move disabling jack to dai link's exit() ASoC: intel: cml_rt1011_rt5682: disable jack in dailink .exit() Pierre-Louis Bossart (3): ASoC: soc-link: introduce exit() callback ASoC: Intel: bdw-rt5677: fix module load/unload issues ASoC: Intel: kbl-rt5660: use .exit() dailink callback to release gpiod include/sound/soc-link.h | 1 + include/sound/soc.h | 3 +++ sound/soc/intel/boards/bdw-rt5677.c | 18 ++++++++++++++-- sound/soc/intel/boards/cml_rt1011_rt5682.c | 8 ++++++++ sound/soc/intel/boards/kbl_rt5660.c | 17 +++++++++++++-- sound/soc/intel/boards/sof_rt5682.c | 24 ++++++++-------------- sound/soc/soc-core.c | 3 +++ sound/soc/soc-link.c | 6 ++++++ 8 files changed, 60 insertions(+), 20 deletions(-) base-commit: 39853b14 -- 2.20.1
-
Fred Oh authored
KASAN throws the following warning in rt1011.c: [ 170.777603] BUG: KASAN: stack-out-of-bounds in _find_next_bit.constprop.0+0x3e/0xf0 find_next_bit() relies on unsigned long pointer arguments, but this driver uses a type cast that generates the KASAN warning. Replace find_next_bit() and find_last_bit() with __ffs() and __fls() to pass the value and avoid casting pointers to make the warning go away. Signed-off-by:
-
Tzung-Bi Shih authored
Sets playback and capture constraints to S16_LE, stereo, 48kHz. Signed-off-by:
-
Shengjiu Wang authored
The "ret" in fsl_easrc_set_ctx_format is not initialized, then the unknown value maybe returned by this function. Fixes: 955ac624 ("ASoC: fsl_easrc: Add EASRC ASoC CPU DAI drivers") Signed-off-by:
-
Fred Oh authored
When removing the machine driver, the rt5682 jack handler will oops if jack detection is not disabled. The jack can be disabled in the dai link's exit(). This is symmetrical change as jack is enabled in init(). Signed-off-by:
-
Fred Oh authored
Move disabling jack from platform driver's remove() to dai link's exit(). This is symmetrical change as jack is enabled in init(). Signed-off-by:
-
Pierre-Louis Bossart authored
The gpiod handling is inspired from the bdw-rt5677 code. Apply same fix to avoid reference count issue while removing modules for consistency. Suggested-by:
Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by:
Curtis Malainey <curtis@malainey.com> Link: https://lore.kernel.org/r/20200622154241.29053-4-pierre-louis.bossart@linux.intel.comSigned-off-by:
-
Pierre-Louis Bossart authored
The mainline code currently prevents modules from being removed. The BE dailink .init() function calls devm_gpiod_get() using the codec component device as argument. When the machine driver is removed, the references to the gpiod are not released, and it's not possible to remove the codec driver module - which is the only entity which could free the gpiod. This conceptual deadlock can be avoided by invoking gpiod_get() in the .init() callback, and calling gpiod_put() in the exit() callback. Tested on SAMUS Chromebook with SOF driver. Suggested-by:
-
