Signed-off-by: Steve French <steve.french@primarydata.com>
Reviewed-by: Pavel Shilovsky <pshilovsky@samba.org>

Validate "persistenthandles" and "nopersistenthandles" mount options against
the support the server claims in negotiate and tree connect SMB3 responses.
Signed-off-by: Steve French <steve.french@primarydata.com>
Reviewed-by: Pavel Shilovsky <pshilovsky@samba.org>

"nopersistenthandles" and "persistenthandles" mount options added.
The former will not request persistent handles on open even when
SMB3 negotiated and Continuous Availability share.  The latter
will request persistent handles (as long as server notes the
capability in protocol negotiation) even if share is not Continuous
Availability share.
Signed-off-by: Steve French <steve.french@primarydata.com>
Reviewed-by: Pavel Shilovsky <pshilovsky@samba.org>

Enable duplicate extents (cp --reflink) ioctl for SMB3.0 not just
SMB3.1.1 since have verified that this works to Windows 2016
(REFS) and additional testing done at recent plugfest with
SMB3.0 not just SMB3.1.1  This will also make it easier
for Samba.
Signed-off-by: Steve French <steve.french@primarydata.com>
Reviewed-by: David Disseldorp <ddiss@suse.de>

Pull Ceph fix from Sage Weil:
 "This sets the stable pages flag on the RBD block device when we have
  CRCs enabled.  (This is necessary since the default assumption for
  block devices changed in 3.9)"

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/sage/ceph-client:
  rbd: require stable pages if message data CRCs are enabled

Pull overlayfs bug fixes from Miklos Szeredi:
 "This contains fixes for bugs that appeared in earlier kernels (all are
  marked for -stable)"

* 'overlayfs-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/vfs:
  ovl: free lower_mnt array in ovl_put_super
  ovl: free stack of paths in ovl_fill_super
  ovl: fix open in stacked overlay
  ovl: fix dentry reference leak
  ovl: use O_LARGEFILE in ovl_copy_up()

Pull networking fixes from David Miller:

 1) Fix two regressions in ipv6 route lookups, particularly wrt output
    interface specifications in the lookup key.  From David Ahern.

 2) Fix checks in ipv6 IPSEC tunnel pre-encap fragmentation, from
    Herbert Xu.

 3) Fix mis-advertisement of 1000BASE-T on bcm63xx_enet, from Simon
    Arlott.

 4) Some smsc phys misbehave with energy detect mode enabled, so add a
    DT property and disable it on such switches.  From Heiko Schocher.

 5) Fix TSO corruption on TX in mv643xx_eth, from Philipp Kirchhofer.

 6) Fix regression added by removal of openvswitch vport stats, from
    James Morse.

 7) Vendor Kconfig options should be bool, not tristate, from Andreas
    Schwab.

 8) Use non-_BH() net stats bump in tcp_xmit_probe_skb(), otherwise we
    barf during TCP REPAIR operations.

 9) Fix various bugs in openvswitch conntrack support, from Joe
    Stringer.

10) Fix NETLINK_LIST_MEMBERSHIPS locking, from David Herrmann.

11) Don't have VSOCK do sock_put() in interrupt context, from Jorgen
    Hansen.

12) Fix skb_realloc_headroom() failures properly in ISDN, from Karsten
    Keil.

13) Add some device IDs to qmi_wwan, from Bjorn Mork.

14) Fix ovs egress tunnel information when using lwtunnel devices, from
    Pravin B Shelar.

15) Add missing NETIF_F_FRAGLIST to macvtab feature list, from Jason
    Wang.

16) Fix incorrect handling of throw routes when the result of the throw
    cannot find a match, from Xin Long.

17) Protect ipv6 MTU calculations from wrap-around, from Hannes Frederic
    Sowa.

18) Fix failed autonegotiation on KSZ9031 micrel PHYs, from Nathan
    Sullivan.

19) Add missing memory barries in descriptor accesses or xgbe driver,
    from Thomas Lendacky.

20) Fix release conditon test in pppoe_release(), from Guillaume Nault.

21) Fix gianfar bugs wrt filter configuration, from Claudiu Manoil.

22) Fix violations of RX buffer alignment in sh_eth driver, from Sergei
    Shtylyov.

23) Fixing missing of_node_put() calls in various places around the
    networking, from Julia Lawall.

24) Fix incorrect leaf now walking in ipv4 routing tree, from Alexander
    Duyck.

25) RDS doesn't check pskb_pull()/pskb_trim() return values, from
    Sowmini Varadhan.

26) Fix VLAN configuration in mlx4 driver, from Jack Morgenstein.

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (79 commits)
  ipv6: protect mtu calculation of wrap-around and infinite loop by rounding issues
  Revert "Merge branch 'ipv6-overflow-arith'"
  net/mlx4: Copy/set only sizeof struct mlx4_eqe bytes
  net/mlx4_en: Explicitly set no vlan tags in WQE ctrl segment when no vlan is present
  vhost: fix performance on LE hosts
  bpf: sample: define aarch64 specific registers
  amd-xgbe: Fix race between access of desc and desc index
  RDS-TCP: Recover correctly from pskb_pull()/pksb_trim() failure in rds_tcp_data_recv
  forcedeth: fix unilateral interrupt disabling in netpoll path
  openvswitch: Fix skb leak using IPv6 defrag
  ipv6: Export nf_ct_frag6_consume_orig()
  openvswitch: Fix double-free on ip_defrag() errors
  fib_trie: leaf_walk_rcu should not compute key if key is less than pn->key
  net: mv643xx_eth: add missing of_node_put
  ath6kl: add missing of_node_put
  net: phy: mdio: add missing of_node_put
  netdev/phy: add missing of_node_put
  net: netcp: add missing of_node_put
  net: thunderx: add missing of_node_put
  ipv6: gre: support SIT encapsulation
  ...

Pull input layer fixes from Dmitry Torokhov:

 - a change to the ALPS driver where we had limit the quirk for
   trackstick handling from being active on all Dells to just a few
   models

 - a fix for a build dependency issue in the sur40 driver

 - a small clock handling fixup in the LPC32xx touchscreen driver

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
  Input: alps - only the Dell Latitude D420/430/620/630 have separate stick button bits
  Input: sur40 - add dependency on VIDEO_V4L2
  Input: lpc32xx_ts - fix warnings caused by enabling unprepared clock

Pull PCI fix from Bjorn Helgaas:
 "Sorry for this last-minute update; it's been in -next for quite a
  while, but I forgot about it until I started getting ready for the
  merge window.

  It's small and fixes a way a user could cause a panic via sysfs, so I
  think it's worth getting it in v4.3.

  NUMA:
    - Prevent out of bounds access in sysfs numa_node override (Sasha Levin)"

* tag 'pci-v4.3-fixes-2' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci:
  PCI: Prevent out of bounds access in numa_node override

Pull arm64 fixes from Will Deacon:
 "Apologies for this being so late, but we've uncovered a few nasty
  issues on arm64 which didn't settle down until yesterday and the fixes
  all look suitable for 4.3.  Of the four patches, three of them are
  Cc'd to stable, with the remaining patch fixing an issue that only
  took effect during the merge window.

  Summary:

   - Fix corruption in SWP emulation when STXR fails due to contention
   - Fix MMU re-initialisation when resuming from a low-power state
   - Fix stack unwinding code to match what ftrace expects
   - Fix relocation code in the EFI stub when DRAM base is not 2MB aligned"

* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
  arm64/efi: do not assume DRAM base is aligned to 2 MB
  Revert "ARM64: unwind: Fix PC calculation"
  arm64: kernel: fix tcr_el1.t0sz restore on systems with extended idmap
  arm64: compat: fix stxr failure case in SWP emulation

Pull ia64 kcmp syscall from Tony Luck:
 "Missed adding the kcmp() syscall a long time ago.  Now it seems that
  it is essential to build systemd"

* tag 'please-pull-syscalls' of git://git.kernel.org/pub/scm/linux/kernel/git/aegl/linux:
  [IA64] Wire up kcmp syscall

rbd requires stable pages, as it performs a crc of the page data before
they are send to the OSDs.

But since kernel 3.9 (patch 1d1d1a76
"mm: only enforce stable page writes if the backing device requires
it") it is not assumed anymore that block devices require stable pages.

This patch sets the necessary flag to get stable pages back for rbd.

In a ceph installation that provides multiple ext4 formatted rbd
devices "bad crc" messages appeared regularly (ca 1 message every 1-2
minutes on every OSD that provided the data for the rbd) in the
OSD-logs before this patch. After this patch this messages are pretty
much gone (only ca 1-2 / month / OSD).

Cc: stable@vger.kernel.org # 3.9+, needs backporting
Signed-off-by: Ronny Hegewald <Ronny.Hegewald@online.de>
[idryomov@gmail.com: require stable pages only in crc case, changelog]
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>

The current arm64 Image relocation code in the UEFI stub assumes that
the dram_base argument it receives is always a multiple of 2 MB. In
reality, it is simply the lowest start address of all RAM entries in
the UEFI memory map, which means it could be any multiple of 4 KB.

Since the arm64 kernel Image needs to reside TEXT_OFFSET bytes beyond
a 2 MB aligned base, or it will fail to boot, make sure we round dram_base
to 2 MB before using it to calculate the relocation address.

Fixes: e38457c3 ("arm64: efi: prefer AllocatePages() over efi_low_alloc() for vmlinux")
Reported-by: Timur Tabi <timur@codeaurora.org>
Tested-by: Timur Tabi <timur@codeaurora.org>
Acked-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Will Deacon <will.deacon@arm.com>

Raw sockets with hdrincl enabled can insert ipv6 extension headers
right into the data stream. In case we need to fragment those packets,
we reparse the options header to find the place where we can insert
the fragment header. If the extension headers exceed the link's MTU we
actually cannot make progress in such a case.

Instead of ending up in broken arithmetic or rounding towards 0 and
entering an endless loop in ip6_fragment, just prevent those cases by
aborting early and signal -EMSGSIZE to user space.

This is the second version of the patch which doesn't use the
overflow_usub function, which got reverted for now.
Suggested-by: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Reported-by: Dmitry Vyukov <dvyukov@google.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Signed-off-by: Hannes Frederic Sowa <hannes@stressinduktion.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

Linus dislikes these changes. To not hold up the net-merge let's revert
it for now and fix the bug like Linus suggested.

This reverts commit ec3661b4, reversing
changes made to c80dbe04.

Cc: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Hannes Frederic Sowa <hannes@stressinduktion.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

systemd > 218 fails to compile on ia64 with:

     error: ‘__NR_kcmp’ undeclared [1].

I've been told that this is because the kcmp syscall hasn't been wired up
for the ia64 arch [2].

The proposed patch thus wire up the kcmp syscall for the ia64 arch.

[1] https://bugs.gentoo.org/show_bug.cgi?id=560492
[2] https://bugs.gentoo.org/show_bug.cgi?id=560492#c17Signed-off-by: Émeric MASCHINO <emeric.maschino@gmail.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>

This reverts commit e306dfd0.

With this patch applied, we were the only architecture making this sort
of adjustment to the PC calculation in the unwinder. This causes
problems for ftrace, where the PC values are matched against the
contents of the stack frames in the callchain and fail to match any
records after the address adjustment.

Whilst there has been some effort to change ftrace to workaround this,
those patches are not yet ready for mainline and, since we're the odd
architecture in this regard, let's just step in line with other
architectures (like arch/arm/) for now.

Cc: <stable@vger.kernel.org>
Signed-off-by: Will Deacon <will.deacon@arm.com>

Commit dd006da2 ("arm64: mm: increase VA range of identity map")
introduced a mechanism to extend the virtual memory map range
to support arm64 systems with system RAM located at very high offset,
where the identity mapping used to enable/disable the MMU requires
additional translation levels to map the physical memory at an equal
virtual offset.

The kernel detects at boot time the tcr_el1.t0sz value required by the
identity mapping and sets-up the tcr_el1.t0sz register field accordingly,
any time the identity map is required in the kernel (ie when enabling the
MMU).

After enabling the MMU, in the cold boot path the kernel resets the
tcr_el1.t0sz to its default value (ie the actual configuration value for
the system virtual address space) so that after enabling the MMU the
memory space translated by ttbr0_el1 is restored as expected.

Commit dd006da2 ("arm64: mm: increase VA range of identity map")
also added code to set-up the tcr_el1.t0sz value when the kernel resumes
from low-power states with the MMU off through cpu_resume() in order to
effectively use the identity mapping to enable the MMU but failed to add
the code required to restore the tcr_el1.t0sz to its default value, when
the core returns to the kernel with the MMU enabled, so that the kernel
might end up running with tcr_el1.t0sz value set-up for the identity
mapping which can be lower than the value required by the actual virtual
address space, resulting in an erroneous set-up.

This patchs adds code in the resume path that restores the tcr_el1.t0sz
default value upon core resume, mirroring this way the cold boot path
behaviour therefore fixing the issue.

Cc: <stable@vger.kernel.org>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Fixes: dd006da2 ("arm64: mm: increase VA range of identity map")
Acked-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Signed-off-by: James Morse <james.morse@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>

If the STXR instruction fails in the SWP emulation code, we leave *data
overwritten with the loaded value, therefore corrupting the data written
by a subsequent, successful attempt.

This patch re-jigs the code so that we only write back to *data once we
know that the update has happened.

Cc: <stable@vger.kernel.org>
Fixes: bd35a4ad ("arm64: Port SWP/SWPB emulation support from arm")
Reported-by: Shengjiu Wang <shengjiu.wang@freescale.com>
Reported-by: Vladimir Murzin <vladimir.murzin@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>

Pull powerpc fix from Michael Ellerman:
 - powerpc/dma: dma_set_coherent_mask() should not be GPL only from Ben

* tag 'powerpc-4.3-6' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
  powerpc/dma: dma_set_coherent_mask() should not be GPL only

When turning this from inline to an exported function I was a bit
over-eager and made it GPL only. This prevents the use of pretty much
all non-GPL PCI driver which is a bit over the top. Let's bring it
back in line with other architecture.

Fixes: 817820b0 ("powerpc/iommu: Support "hybrid" iommu/direct DMA ops for coherent_mask < dma_mask")
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>

Or Gerlitz says:

====================
Mellanox mlx4 driver fixes for 4.3-rc7

Jack's fix is for a regression introduced in 4.3-rc1

Carol's fix addresses an issue which exists for while and
turns to beat us hard on PPC, please queue for -stable.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

When doing memcpy/memset of EQEs, we should use sizeof struct
mlx4_eqe as the base size and not caps.eqe_size which could be bigger.

If caps.eqe_size is bigger than the struct mlx4_eqe then we corrupt
data in the master context.

When using a 64 byte stride, the memcpy copied over 63 bytes to the
slave_eq structure.  This resulted in copying over the entire eqe of
interest, including its ownership bit -- and also 31 bytes of garbage
into the next WQE in the slave EQ -- which did NOT include the ownership
bit (and therefore had no impact).

However, once the stride is increased to 128, we are overwriting the
ownership bits of *three* eqes in the slave_eq struct.  This results
in an incorrect ownership bit for those eqes, which causes the eq to
seem to be full. The issue therefore surfaced only once 128-byte EQEs
started being used in SRIOV and (overarchitectures that have 128/256
byte cache-lines such as PPC) - e.g after commit 77507aa2
"net/mlx4_core: Enable CQE/EQE stride support".

Fixes: 08ff3235 ('mlx4: 64-byte CQE/EQE support')
Signed-off-by: Carol L Soto <clsoto@linux.vnet.ibm.com>
Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il>
Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

We do not set the ins_vlan field to zero when no vlan id is present in the packet.

Since WQEs in the TX ring are not zeroed out between uses, this oversight
could result in having vlan flags present in the WQE ctrl segment when no
vlan is preset.

Fixes: e38af4fa ('net/mlx4_en: Add support for hardware accelerated 802.1ad vlan')
Reported-by: Gideon Naim <gideonn@mellanox.com>
Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il>
Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

commit 2751c988 ("vhost: cross-endian
support for legacy devices") introduced a minor regression: even with
cross-endian disabled, and even on LE host, vhost_is_little_endian is
checking is_le flag so there's always a branch.

To fix, simply check virtio_legacy_is_little_endian first.

Cc: Greg Kurz <gkurz@linux.vnet.ibm.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Greg Kurz <gkurz@linux.vnet.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Define aarch64 specific registers for building bpf samples correctly.
Signed-off-by: Yang Shi <yang.shi@linaro.org>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

During Tx cleanup it's still possible for the descriptor data to be
read ahead of the descriptor index. A memory barrier is required between
the read of the descriptor index and the start of the Tx cleanup loop.
This allows a change to a lighter-weight barrier in the Tx transmit
routine just before updating the current descriptor index.

Since the memory barrier does result in extra overhead on arm64, keep
the previous change to not chase the current descriptor value. This
prevents the execution of the barrier for each loop performed.
Suggested-by: Alexander Duyck <alexander.duyck@gmail.com>
Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Either of pskb_pull() or pskb_trim() may fail under low memory conditions.
If rds_tcp_data_recv() ignores such failures, the application will
receive corrupted data because the skb has not been correctly
carved to the RDS datagram size.

Avoid this by handling pskb_pull/pskb_trim failure in the same
manner as the skb_clone failure: bail out of rds_tcp_data_recv(), and
retry via the deferred call to rds_send_worker() that gets set up on
ENOMEM from rds_tcp_read_sock()
Signed-off-by: Sowmini Varadhan <sowmini.varadhan@oracle.com>
Acked-by: Santosh Shilimkar <santosh.shilimkar@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Forcedeth currently uses disable_irq_lockdep and enable_irq_lockdep, which in
some configurations simply calls local_irq_disable.  This causes errant warnings
in the netpoll path as in netpoll_send_skb_on_dev, where we disable irqs using
local_irq_save, leading to the following warning:

WARNING: at net/core/netpoll.c:352 netpoll_send_skb_on_dev+0x243/0x250() (Not
tainted)
Hardware name:
netpoll_send_skb_on_dev(): eth0 enabled interrupts in poll
(nv_start_xmit_optimized+0x0/0x860 [forcedeth])
Modules linked in: netconsole(+) configfs ipv6 iptable_filter ip_tables ppdev
parport_pc parport sg microcode serio_raw edac_core edac_mce_amd k8temp
snd_hda_codec_realtek snd_hda_codec_generic forcedeth snd_hda_intel
snd_hda_codec snd_hwdep snd_seq snd_seq_device snd_pcm snd_timer snd soundcore
snd_page_alloc i2c_nforce2 i2c_core shpchp ext4 jbd2 mbcache sr_mod cdrom sd_mod
crc_t10dif pata_amd ata_generic pata_acpi sata_nv dm_mirror dm_region_hash
dm_log dm_mod [last unloaded: scsi_wait_scan]
Pid: 1940, comm: modprobe Not tainted 2.6.32-573.7.1.el6.x86_64.debug #1
Call Trace:
 [<ffffffff8107bbc1>] ? warn_slowpath_common+0x91/0xe0
 [<ffffffff8107bcc6>] ? warn_slowpath_fmt+0x46/0x60
 [<ffffffffa00fe5b0>] ? nv_start_xmit_optimized+0x0/0x860 [forcedeth]
 [<ffffffff814b3593>] ? netpoll_send_skb_on_dev+0x243/0x250
 [<ffffffff814b37c9>] ? netpoll_send_udp+0x229/0x270
 [<ffffffffa02e3299>] ? write_msg+0x39/0x110 [netconsole]
 [<ffffffffa02e331b>] ? write_msg+0xbb/0x110 [netconsole]
 [<ffffffff8107bd55>] ? __call_console_drivers+0x75/0x90
 [<ffffffff8107bdba>] ? _call_console_drivers+0x4a/0x80
 [<ffffffff8107c445>] ? release_console_sem+0xe5/0x250
 [<ffffffff8107d200>] ? register_console+0x190/0x3e0
 [<ffffffffa02e71a6>] ? init_netconsole+0x1a6/0x216 [netconsole]
 [<ffffffffa02e7000>] ? init_netconsole+0x0/0x216 [netconsole]
 [<ffffffff810020d0>] ? do_one_initcall+0xc0/0x280
 [<ffffffff810d4933>] ? sys_init_module+0xe3/0x260
 [<ffffffff8100b0d2>] ? system_call_fastpath+0x16/0x1b
---[ end trace f349c7af88e6a6d5 ]---
console [netcon0] enabled
netconsole: network logging started

Fix it by modifying the forcedeth code to use
disable_irq_nosync_lockdep_irqsavedisable_irq_nosync_lockdep_irqsave instead,
which saves and restores irq state properly.  This also saves us a little code
in the process

Tested by the reporter, with successful restuls

Patch applies to the head of the net tree
Signed-off-by: Neil Horman <nhorman@tuxdriver.com>
CC: "David S. Miller" <davem@davemloft.net>
Reported-by: Vasily Averin <vvs@sw.ru>
Signed-off-by: David S. Miller <davem@davemloft.net>

nf_ct_frag6_gather() makes a clone of each skb passed to it, and if the
reassembly is successful, expects the caller to free all of the original
skbs using nf_ct_frag6_consume_orig(). This call was previously missing,
meaning that the original fragments were never freed (with the exception
of the last fragment to arrive).

Fix this by ensuring that all original fragments except for the last
fragment are freed via nf_ct_frag6_consume_orig(). The last fragment
will be morphed into the head, so it must not be freed yet. Furthermore,
retain the ->next pointer for the head after skb_morph().

Fixes: 7f8a436e ("openvswitch: Add conntrack action")
Reported-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Joe Stringer <joestringer@nicira.com>
Acked-by: Pravin B Shelar <pshelar@nicira.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

This is needed in openvswitch to fix an skb leak in the next patch.
Signed-off-by: Joe Stringer <joestringer@nicira.com>
Acked-by: Pravin B Shelar <pshelar@nicira.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

If ip_defrag() returns an error other than -EINPROGRESS, then the skb is
freed. When handle_fragments() passes this back up to
do_execute_actions(), it will be freed again. Prevent this double free
by never freeing the skb in do_execute_actions() for errors returned by
ovs_ct_execute. Always free it in ovs_ct_execute() error paths instead.

Fixes: 7f8a436e ("openvswitch: Add conntrack action")
Reported-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Joe Stringer <joestringer@nicira.com>
Acked-by: Pravin B Shelar <pshelar@nicira.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

We were computing the child index in cases where the key value we were
looking for was actually less than the base key of the tnode.  As a result
we were getting incorrect index values that would cause us to skip over
some children.

To fix this I have added a test that will force us to use child index 0 if
the key we are looking for is less than the key of the current tnode.

Fixes: 8be33e95 ("fib_trie: Fib walk rcu should take a tnode and key instead of a trie and a leaf")
Reported-by: Brian Rak <brak@gameservers.com>
Signed-off-by: Alexander Duyck <aduyck@mirantis.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

In commit b49a0871("block: remove split code in
blkdev_issue_{discard,write_same}"), discard_granularity and alignment
checks were removed. Ideally, with bio late splitting, the upper layers
shouldn't need to depend on device's limits.

Christoph reported a discard regression on the HGST Ultrastar SN100 NVMe
device when mkfs.xfs. We have not found the root cause yet.

This patch re-adds discard_granularity and alignment checks by reverting
the related changes in commit b49a0871. The good thing is now we can
remove the 2G discard size cap and just use UINT_MAX to avoid bi_size
overflow.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Tested-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Ming Lin <ming.l@ssi.samsung.com>
Reviewed-by: Mike Snitzer <snitzer@redhat.com>
Signed-off-by: Jens Axboe <axboe@fb.com>

Pull ARM fixes from Russell King:
 "Two fixes for ARM and one for clkdev:

   - Fix another build issue with vdsomunge on non-glibc systems
   - Fix a randconfig build error caused by an invalid configuration
   - Fix a clkdev problem causing the Nokia n700 to no longer boot"

* 'fixes' of git://ftp.arm.linux.org.uk/~rmk/linux-arm:
  clkdev: fix clk_add_alias() with a NULL alias device name
  ARM: 8445/1: fix vdsomunge not to depend on glibc specific byteswap.h
  ARM: make RiscPC depend on MMU

Pull blkcg fix from Jens Axboe:
 "One final fix that should go into 4.3.  It's a simple 2x1 liner,
  fixing a blkcg accounting issue.  It was using the wrong bio member to
  look at the sync and write bits..."

* 'for-linus' of git://git.kernel.dk/linux-block:
  blkcg: fix incorrect read/write sync/async stat accounting

Pull crypto fix from Herbert Xu:
 "This fixes a problem in the Crypto API that may cause spurious errors
  when signals are received by the process that made the orignal system
  call into the kernel"

* 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6:
  crypto: api - Only abort operations on fatal signal

Pull module preemption fix from Rusty Russell:
 "Turns out we should have always been disabling preemption here;
  someone finally caught it thanks to Peter Z's additional checks"

* tag 'fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux:
  module: Fix locking in symbol_put_addr()

While unifying how blkcg stats are collected, 77ea7338 ("blkcg:
move io_service_bytes and io_serviced stats into blkcg_gq")
incorrectly used bio->flags instead of bio->rw to tell the IO type.
This made IOs to be accounted as the wrong type.  Fix it.
Signed-off-by: Tejun Heo <tj@kernel.org>
Fixes: 77ea7338 ("blkcg: move io_service_bytes and io_serviced stats into blkcg_gq")
Reviewed-by: Jeff Moyer <jmoyer@redhat.com>
Signed-off-by: Jens Axboe <axboe@fb.com>

Julia Lawall says:

====================
add missing of_node_put

The various for_each device_node iterators performs an of_node_get on each
iteration, so a break out of the loop requires an of_node_put.

The complete semantic patch that fixes this problem is
(http://coccinelle.lip6.fr):

// <smpl>
@r@
local idexpression n;
expression e1,e2;
iterator name for_each_node_by_name, for_each_node_by_type,
for_each_compatible_node, for_each_matching_node,
for_each_matching_node_and_match, for_each_child_of_node,
for_each_available_child_of_node, for_each_node_with_property;
iterator i;
statement S;
expression list [n1] es;
@@

(
(
for_each_node_by_name(n,e1) S
|
for_each_node_by_type(n,e1) S
|
for_each_compatible_node(n,e1,e2) S
|
for_each_matching_node(n,e1) S
|
for_each_matching_node_and_match(n,e1,e2) S
|
for_each_child_of_node(e1,n) S
|
for_each_available_child_of_node(e1,n) S
|
for_each_node_with_property(n,e1) S
)
&
i(es,n,...) S
)

@@
local idexpression r.n;
iterator r.i;
expression e;
expression list [r.n1] es;
@@

 i(es,n,...) {
   ...
(
   of_node_put(n);
|
   e = n
|
   return n;
|
+  of_node_put(n);
?  return ...;
)
   ...
 }

@@
local idexpression r.n;
iterator r.i;
expression e;
expression list [r.n1] es;
@@

 i(es,n,...) {
   ...
(
   of_node_put(n);
|
   e = n
|
+  of_node_put(n);
?  break;
)
   ...
 }
... when != n

@@
local idexpression r.n;
iterator r.i;
expression e;
identifier l;
expression list [r.n1] es;
@@

 i(es,n,...) {
   ...
(
   of_node_put(n);
|
   e = n
|
+  of_node_put(n);
?  goto l;
)
   ...
 }
...
l: ... when != n// </smpl>
====================
Signed-off-by: David S. Miller <davem@davemloft.net>