Signed-off-by: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Mark M. Hoffman <mhoffman@lightlink.com>

Remove the old alarms hack and replace it with per-sensor alarm files.
Signed-off-by: Darrick J. Wong <djwong@us.ibm.com>
Acked-by: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Mark M. Hoffman <mhoffman@lightlink.com>

This patch adds support to the fschmd driver for reading the voltage scaling
factors from BIOS DMI tables, as specified in the Siemens datasheet.
Signed-off-by: Hans de Goede <j.w.r.degoede@hhs.nl>
Acked-by: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Mark M. Hoffman <mhoffman@lightlink.com>

While it is possible to force SMBus-based hardware monitoring chip
drivers to drive a not officially supported device, we do not have this
possibility for Super-I/O-based drivers. That's unfortunate because
sometimes newer chips are fully compatible and just forcing the driver
to load would work. Instead of that we have to tell the users to
recompile the kernel driver, which isn't an easy task for everyone.

So, I propose that we add a module parameter to all Super-I/O based
hardware monitoring drivers, letting advanced users force the driver
to load on their machine. The user has to provide the device ID of a
supposedly compatible device. This requires looking at the source code or
a datasheet, so I am confident that users can't randomly force a driver
without knowing what they are doing. Thus this should be relatively safe.

As you can see from the code, the implementation is pretty simple and
unintrusive.
Signed-off-by: Jean Delvare <khali@linux-fr.org>
Acked-by: Hans de Goede <j.w.r.degoede@hhs.nl>
Signed-off-by: Mark M. Hoffman <mhoffman@lightlink.com>

Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Mark M. Hoffman <mhoffman@lightlink.com>

It's about time to reflect the move of the lm-sensors project to
lm-sensors.org.
Signed-off-by: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Mark M. Hoffman <mhoffman@lightlink.com>

libsensors 3.0 needs these.
Signed-off-by: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Mark M. Hoffman <mhoffman@lightlink.com>

Use standard dynamic sysfs callbacks instead of macro-generated
wrappers. This makes the code more readable, and the binary smaller
(by about 11%).
Signed-off-by: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Mark M. Hoffman <mhoffman@lightlink.com>

This allows for some code refactoring, making the binary slightly
smaller. This is also required to use dynamic sysfs callbacks for
voltage and temperature files.
Signed-off-by: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Mark M. Hoffman <mhoffman@lightlink.com>

* Drop trailing spaces
* Drop unused driver ID
* Drop stray backslashes in macros
* Rename new_client to client
* Drop redundant initializations to 0
Signed-off-by: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Mark M. Hoffman <mhoffman@lightlink.com>

As indirectly reported by Olof Johansson, the lm90 driver uses a
custom i2c read function even during detection, at which point we
don't know yet what device we're talking with. It would make more
sense to only use the generic i2c read function at this point, so
that we don't log irrelevant errors on misdetection.
Signed-off-by: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Mark M. Hoffman <mhoffman@lightlink.com>

The fan speeds reported by the gl518sm driver are twice as much as they
should. It's currently reporting the number of pulses per minute, not
rotations per minute, while typical fans emit two pulses per rotation.
This explains why all reports with this driver had very high speed
values (between 9000 to 12000 RPM). Odd that nobody ever actually
complained about this bug.
Signed-off-by: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Mark M. Hoffman <mhoffman@lightlink.com>

If the user attempts to write a fan clock divider not supported by
the chip, an error should be returned.
Signed-off-by: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Mark M. Hoffman <mhoffman@lightlink.com>

The new libsensors needs these.
Signed-off-by: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Mark M. Hoffman <mhoffman@lightlink.com>

This makes the code more readable and the binary smaller (by 5% or so).
Signed-off-by: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Mark M. Hoffman <mhoffman@lightlink.com>

The early revisions of the GL518SM do not report voltage values for
the first 3 voltage channels. We should not create sysfs attributes
for these missing features.
Signed-off-by: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Mark M. Hoffman <mhoffman@lightlink.com>

* Drop history, it doesn't belong there
* Drop unused struct member
* Drop bogus struct member comment
* Drop unused driver ID
* Rename new_client to client
* Drop redundant initializations to 0
* Drop useless cast
* Drop trailing space
* Fix comment
* Drop duplicate comment
Signed-off-by: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Mark M. Hoffman <mhoffman@lightlink.com>

Somehow non-ASCII characters managed to sneak into the fschmd driver.
Kick them out.
Signed-off-by: Jean Delvare <khali@linux-fr.org>
Cc: Hans de Goede <j.w.r.degoede@hhs.nl>
Signed-off-by: Mark M. Hoffman <mhoffman@lightlink.com>

* Whitespace cleanups
* Constify scaling constants
* Fold long lines
* Drop redundant initializations to 0
* Rename new_client to just client
* Use sysfs_create_group()
* Drop a useless comment
Signed-off-by: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Mark M. Hoffman <mhoffman@lightlink.com>

The future libsensors needs these individual alarm and fault files.
Signed-off-by: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Mark M. Hoffman <mhoffman@lightlink.com>

This lets us get rid of macro-generated functions and shrinks the
driver size by about 30%.
Signed-off-by: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Mark M. Hoffman <mhoffman@lightlink.com>

It happens that the Analog Devices ADM1024 is fully compatible with
the National Semiconductor LM87, so support for the former can easily
be added to the lm87 driver.
Signed-off-by: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Mark M. Hoffman <mhoffman@lightlink.com>

Signed-off-by: Kevin Lo <kevlo@kevlo.org>
Signed-off-by: Mark M. Hoffman <mhoffman@lightlink.com>

Since <linux/log2.h> already supplies a power-of-two test, there's no
point in having this source file redefine it again.
Signed-off-by: Robert P. J. Day <rpjday@crashcourse.ca>
Acked-by: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Mark M. Hoffman <mhoffman@lightlink.com>

Remove duplicated defines.
Signed-off-by: Nicolas Kaiser <nikai@nikai.net>
Acked-by: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Mark M. Hoffman <mhoffman@lightlink.com>

We've never seen any device supported by the lm78 or w83781d driver at
addresses 0x20-0x27, so let's stop probing these addresses. Extra probes cost
time, and have potential for confusing or misdetecting other I2C devices.
Signed-off-by: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Mark M. Hoffman <mhoffman@lightlink.com>

Let drivers walk the DMI table for their own needs. Some drivers need
data stored in OEM-specific DMI records for proper operation.
Signed-off-by: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Mark M. Hoffman <mhoffman@lightlink.com>

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/shaggy/jfs-2.6:
  BKL-removal: Implement a compat_ioctl handler for JFS
  BKL-removal: Use unlocked_ioctl for jfs

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: (34 commits)
  Input: i8042 - non-x86 build fix
  Input: pxa27x_keypad - also enable on PXA3xx
  Input: pxa27x_keypad - add debounce_interval to the keypad platform data
  Input: pxa27x_keypad - use device resources for I/O memory mapping and IRQ
  Input: pxa27x_keypad - enable rotary encoders and direct keys
  Input: pxa27x_keypad - introduce pxa27x_keypad_config()
  Input: pxa27x_keypad - introduce driver structure and use KEY() to define matrix keys
  Input: pxa27x_keypad - remove pin configuration from the driver
  Input: pxa27x_keypad - rename the driver (was pxa27x_keyboard)
  Input: constify function pointer tables (seq_operations)
  Input: i8042 - add Fujitsu-Siemens Amilo Pro 2010 to nomux list
  Input: i8042 - enable DMI quirks on x86-64
  Input: i8042 - add Dritek quirk for Acer Aspire 9110
  Input: add input event to APM event bridge
  Input: mousedev - use BIT_MASK instead of BIT
  Input: remove duplicate includes
  Input: remove cdev from input_dev structure
  Input: remove duplicated headers in drivers/char/keyboard.c
  Input: i8042 - add Dritek keyboard extension quirk
  Input: add Tosa keyboard driver
  ...

* 'upstream-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mfasheh/ocfs2:
  ocfs2: Negotiate locking protocol versions.

* git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-2.6:
  sysfs: remove BUG_ON() from sysfs_remove_group()
  Driver core: Revert "Fix Firmware class name collision"
  Block: Fix whole_disk attribute bug

The ioctls were already compatible except for the actual values so this
was fairly easy to do.
Signed-off-by: Andi Kleen <ak@suse.de>
Signed-off-by: Dave Kleikamp <shaggy@linux.vnet.ibm.com>

Make sure we have enough room for all the GR registers or we'll end up
clobbering the AR index register (which should actually be harmless
unless the BIOS is making an assumption about it).
Noticed-by: Jens Axboe <jens.axboe@oracle.com>
Signed-off-by: Jesse Barnes <jesse.barnes@intel.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Convert jfs_ioctl over to not use the BKL. The only potential race
I could see was with two ioctls in parallel changing the flags
and losing the updates. Use the i_mutex to protect against this.
Signed-off-by: Andi Kleen <ak@suse.de>
Signed-off-by: Dave Kleikamp <shaggy@linux.vnet.ibm.com>

It's possible that the caller of sysfs_remove_group messed up and passed in an attribute group that was not really registered to this kobject.  But don't panic for such a foolish error, spit out a warning about what happened, and continue on our way safely.

Cc: Roland Dreier <rdreier@cisco.com>
Cc: Tejun Heo <htejun@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

This reverts commit 109f0e93.

The original patch breaks BIOS updates on all Dell machines. The path to
the firmware file for the dell_rbu driver changes, which breaks all of
the userspace tools which rely on it.

Note that this patch re-introduces a problem with i2c name collision
that was previously fixed by this patch.
Signed-off-by: Michael E Brown <michael_e_brown@dell.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

The "whole_disk" attribute was not properly converted in the block
device conversion earlier, and if the file is read, bad things can
happen.  This patch fixes this, making the attribute an empty one,
preserving the original functionality.

Many thanks to David Miller for finding this, and pointing me in the
proper place within the block code to look.
Acked-by: David S. Miller <davem@davemloft.net>
Cc: Kay Sievers <kay.sievers@vrfy.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc-2.6:
  [SPARC32]: Use regsets in arch_ptrace().
  [SPARC64]: Use regsets in arch_ptrace().
  [SPARC32]: Use regsets for ELF core dumping.
  [SPARC64]: Use regsets for ELF core dumping.
  [SPARC64]: Remove unintentional ptrace debugging messages.
  [SPARC]: Move over to arch_ptrace().
  [SPARC]: Remove PTRACE_SUN* handling.
  [SPARC]: Kill DEBUG_PTRACE code.
  [SPARC32]: Add user regset support.
  [SPARC64]: Add user regsets.
  [SPARC64]: Fix booting on non-zero cpu.

* git://git.infradead.org/mtd-2.6: (120 commits)
  [MTD] Fix mtdoops.c compilation
  [MTD] [NOR] fix startup lock when using multiple nor flash chips
  [MTD] [DOC200x] eccbuf is statically defined and always evaluate to true
  [MTD] Fix maps/physmap.c compilation with CONFIG_PM
  [MTD] onenand: Add panic_write function to the onenand driver
  [MTD] mtdoops: Use the panic_write function when present
  [MTD] Add mtd panic_write function pointer
  [MTD] [NAND] Freescale enhanced Local Bus Controller FCM NAND support.
  [MTD] physmap.c: Add support for multiple resources
  [MTD] [NAND] Fix misparenthesization introduced by commit 78b65179...
  [MTD] [NAND] Fix Blackfin NFC ECC calculating bug with page size 512 bytes
  [MTD] [NAND] Remove wrong operation in PM function of the BF54x NFC driver
  [MTD] [NAND] Remove unused variable in plat_nand_remove
  [MTD] Unlocking all Intel flash that is locked on power up.
  [MTD] [NAND] at91_nand: Make mtdparts option can override board info
  [MTD] mtdoops: Various minor cleanups
  [MTD] mtdoops: Ensure sequential write to the buffer
  [MTD] mtdoops: Perform write operations in a workqueue
  [MTD] mtdoops: Add further error return code checking
  [MTD] [NOR] Test devtype, not definition in flash_probe(), drivers/mtd/devices/lart.c
  ...

* 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux-acpi-2.6: (112 commits)
  ACPI: fix build warning
  Revert "cpuidle: build fix for non-x86"
  ACPI: update intrd DSDT override console messages
  ACPI: update DSDT override documentation
  ACPI: Add "acpi_no_initrd_override" kernel parameter
  ACPI: its a directory not a folder....
  ACPI: misc cleanups
  ACPI: add missing prink prefix strings
  ACPI: cleanup acpi.h
  ACPICA: fix CONFIG_ACPI_DEBUG_FUNC_TRACE build
  ACPI: video: Ignore ACPI video devices that aren't present in hardware
  ACPI: video: reset brightness on resume
  ACPI: video: call ACPI notifier chain for ACPI video notifications
  ACPI: create notifier chain to get hotkey events to graphics driver
  ACPI: video: delete unused display switch on hotkey event code
  ACPI: video: create "brightness_switch_enabled" modparam
  cpuidle: Add a poll_idle method
  ACPI: cpuidle: Support C1 idle time accounting
  ACPI: enable MWAIT for C1 idle
  ACPI: idle: Fix acpi_safe_halt usages and interrupt enabling/disabling
  ...