- 19 May, 2010 40 commits
-
-
Dan Carpenter authored
Return an error if the controller is not found. Signed-off-by:
Dan Carpenter <error27@gmail.com> Signed-off-by:
Mauro Carvalho Chehab <mchehab@redhat.com>
-
Dan Carpenter authored
"dev" is never NULL here so there is no need to check. Signed-off-by:
-
Dean Anderson authored
adding v4l2_device structure. if one video_register_device call fails, allows use of other devices or channels. Signed-off-by:
Dean Anderson <dean@sensoray.com> Signed-off-by:
-
Dean Anderson authored
Signed-off-by:
-
Dean Anderson authored
big kernel lock removed from open function. v4l2 code does not require locking the open function except to check asynchronous firmware load state, which is protected by a mutex Signed-off-by:
-
Dean Anderson authored
call to video_device_alloc was not being checked in probe function. code simplified and uses video_device inside device structure. Signed-off-by:
-
Dean Anderson authored
removal of unused pipe array (of size one). Signed-off-by:
-
Dean Anderson authored
simplifies use of kref in driver Signed-off-by:
-
Dan Carpenter authored
The "AUVI_INPUT(tmp)" macro uses "tmp" as an index of an array with AU0828_MAX_INPUT elements. Signed-off-by:
-
istvan_v@mailbox.hu authored
The following patch fixes code that checks for CX88_VMUX_TELEVISION, but not CX88_VMUX_CABLE. This prevented for example the audio standard from being set when using the cable input. Signed-off-by:
Istvan Varga <istvanv@users.sourceforge.net> Signed-off-by:
-
Christoph Fritz authored
makes USB_PWC_INPUT_EVDEV to depend also on USB_PWC Signed-off-by:
Christoph Fritz <chf.fritz@googlemail.com> Signed-off-by:
-
Bjørn Mork authored
Never call dvb_frontend_detach if we failed to attach a frontend. This fixes the following oops: [ 8.172997] DVB: registering new adapter (TT-Budget S2-1600 PCI) [ 8.209018] adapter has MAC addr = 00:d0:5c:cc:a7:29 [ 8.328665] Intel ICH 0000:00:1f.5: PCI INT B -> GSI 17 (level, low) -> IRQ 17 [ 8.328753] Intel ICH 0000:00:1f.5: setting latency timer to 64 [ 8.562047] DVB: Unable to find symbol stv090x_attach() [ 8.562117] BUG: unable to handle kernel NULL pointer dereference at 000000ac [ 8.562239] IP: [<e08b04a3>] dvb_frontend_detach+0x4/0x67 [dvb_core] Ref http://bugs.debian.org/575207 Also clean up if we are unable to register the tuner and LNB drivers [mchehab@redhat.com: add printk log level, to calm down chechpatch.pl] Signed-off-by:
Bjørn Mork <bjorn@mork.no> Reported-by:
Fladischer Michael <FladischerMichael@fladi.at> Acked-by:
Oliver Endriss <o.endriss@gmx.de> Signed-off-by:
-
David Härdeman authored
This patch adds an RC6 decoder (modes 0 and 6A) to ir-core. Signed-off-by:
David Härdeman <david@hardeman.nu> Signed-off-by:
-
David Härdeman authored
This patch adds NECx support to drivers/media/IR/ir-nec-decoder.c Signed-off-by:
-
David Härdeman authored
This patch adds RC5x support to drivers/media/IR/ir-rc5-decoder.c Signed-off-by:
-
Nicolas Noirbent authored
Fix a divide-by-zero error in ds3000's ds3000_read_snr(), when getting a very low signal reading (dvbs2_signal_reading >= 1). This prevents some nasty EIPs when running szap-s2 with a very low signal strength. Signed-off-by:
Nicolas Noirbent <nicolas.noirbent@smartjog.com> Signed-off-by:
-
Mauro Carvalho Chehab authored
drivers/media/video/gspca/cpia1.c:1063: warning: ‘command_setlights’ defined but not used Signed-off-by: -
Mauro Carvalho Chehab authored
drivers/media/IR/ir-raw-event.c:55: warning: ‘wq_load’ defined but not used drivers/media/IR/ir-raw-event.c:222: warning: ‘init_decoders’ defined but not used drivers/media/IR/rc-map.c: In function ‘get_rc_map’: drivers/media/IR/rc-map.c:40: warning: unused variable ‘rc’ Signed-off-by: -
Andreas Bombe authored
Due to obvious copy and paste coding a number of video capture drivers which implement a limit on the buffer memory decremented the user supplied buffer count in a while loop until it reaches an acceptable value. This is a silly thing to do when the maximum value can be directly computed. Signed-off-by:
Andreas Bombe <aeb@debian.org> Signed-off-by:
-
Herton Ronaldo Krzesinski authored
This reverts commit bc52d6eb. On newer kernels, a saa7134 board stopped to display TV video output properly. After a bisect, I found it as the commit causing the issue. Turns out that v4l_bound_align_image isn't doing the same bounding calculation as manually done previously in saa7134_try_fmt_vid_cap. What isn't equal is the calculation done in clamp align, while previously it did "f->fmt.pix.width &= ~0x03", clamp_align function does "Round to nearest aligned value" as stated in the comment, which yields a different result. If I comment the round calculation in clamp_align like this: "x = (x /*+ (1 << (align - 1))*/) & mask", I get it fixed too, because this way the calculation is the same then. Signed-off-by:
Herton Ronaldo Krzesinski <herton@mandriva.com.br> Signed-off-by:
-
Wolfram Sang authored
In file included from drivers/media/dvb/dvb-usb/dib0700_devices.c:14: drivers/media/dvb/frontends/dib8000.h: In function 'dib8000_get_adc_power': drivers/media/dvb/frontends/dib8000.h:112: warning: no return statement in function returning non-void Fixed by adding a return to the dummy function. Signed-off-by:
Wolfram Sang <w.sang@pengutronix.de> Signed-off-by:
-
Huang Weiyi authored
Remove unused #include <linux/version.h>('s) in drivers/media/dvb/ngene/ngene-core.c Signed-off-by:Huang Weiyi <weiyi.huang@gmail.com> Signed-off-by:
-
Hans Verkuil authored
Now that video_ioctl2 no longer clobbers the argument for _IO() ioctls we can move these into vidioc_default where they really belong. Signed-off-by:
Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by:
-
Hans Verkuil authored
Try to make a more sensible sequence of events in __video_do_ioctl: first check for a valid ops pointer, then get the compat part done. The VIDIOCGMBUF command is now part of the big switch. Signed-off-by:
-
Hans Verkuil authored
After unregister_device all fileops are blocked, except for ioctls. So it is not just the open that is blocked, others are as well. Signed-off-by:
-
Hans Verkuil authored
Note that I have not been able to find anyone with this hardware. I tried contacting the author without success, searched on eBay and similar places without luck either. So this conversion is untested. That said, it was pretty straightforward so it is time to have this driver join the V4L2 world at last. Signed-off-by:
-
Hans Verkuil authored
The indentation of the sections had gone wrong, causing a mistake with section nesting. Fixed. Signed-off-by:
-
Hans Verkuil authored
The usbvision driver created vbi device nodes but the actual implementation was just stubs and only returned errors to userspace. In addition it used video_usercopy() and we want to remove that eventually. So remove all the vbi code except for the vbi flag in the card definition should someone ever be mad enough to work on a proper implementation for this driver. Signed-off-by:
-
Hans Verkuil authored
You want to be able to reach the debug code at the end of this function, so don't use return, use break. Signed-off-by:
-
Hans Verkuil authored
If the ioctl was defined without direction (e.g. _IO('o', 25)), then the arg as passed to vidioc_default was NULL instead of the original argument. Several ioctls in e.g. include/linux/dvb/video.h and audio.h use this type of ioctl to pass simple numerical values to the driver. Signed-off-by: -
Hans Verkuil authored
For some reason the definition of enum v4l2_ctrl_type is far from the place where it is actually needed. This makes it hard to work with this header. Move it to just before struct v4l2_queryctrl, which is the one that actually uses it. Signed-off-by:
-
Hans Verkuil authored
The spec says that the control ID for these types of controls is the same as that of the control class. But it should read: 'control class + 1'. Signed-off-by:
-
Dan Carpenter authored
If the kmalloc() failed for "ccdc_cfg = kmalloc(...);" then we would exit with the lock held. I moved the mutex_lock() below the allocation because it isn't protecting anything in that block and allocations are allocations are sometimes slow. Signed-off-by:
Vaibhav Hiremath <hvaibhav@ti.com> Signed-off-by:
-
Mauro Carvalho Chehab authored
ir-core.h has the kABI to be used by the bridge drivers, when needing to register IR protocols and pass IR events. However, the same file also contains IR subsystem internal calls, meant to be used inside ir-core and between ir-core and the raw decoders. Better to move those functions to an internal header, for some reasons: 1) Header will be a little more cleaner; 2) It avoids the need of recompile everything (bridge/hardware drivers, etc), just because a new decoder were added, or some other internal change were needed; 3) Better organize the ir-core API, splitting the functions that are internal to IR core and the ancillary drivers (decoders, lirc_dev) from the features that should be exported to IR subsystem clients. Signed-off-by: -
David Härdeman authored
drivers/media/IR/ir-raw-event.c is currently written with the assumption that all "raw" hardware will generate events only on state change (i.e. when a pulse or space starts). However, some hardware (like mceusb, probably the most popular IR receiver out there) only generates duration data (and that data is buffered so using any kind of timing on the data is futile). Furthermore, using signed int's to represent pulse/space durations is a well-known approach when writing ir decoders. With this patch: - s64 int's are used to represent pulse/space durations in ns - a workqueue is used to decode the ir protocols outside of interrupt context - #defines are added to make decoders clearer - decoder reset is implemented by passing a zero duration to the kfifo queue and decoders are updated accordingly Signed-off-by:
-
Mauro Carvalho Chehab authored
drivers/media/IR/ir-sysfs.c: In function ‘store_protocol’: drivers/media/IR/ir-sysfs.c:93: warning: suggest parentheses around assignment used as truth value Signed-off-by: -
Mauro Carvalho Chehab authored
Hardware decoders have a more limited set of decoders than software ones. In general, they support just one protocol at a given time, but allow changing between a few options. Rename the previous badly named "current_protocol" as just "protocol", meaning the current protocol(s) accepted by the driver, and add a "support_protocols" to represent the entire universe of supported protocols by that specific hardware. As commented on http://lwn.net/Articles/378884/, the "one file, one value" rule doesn't fit nor does make much sense for bitmap or enum values. So, the supported_protocols will enum all supported protocols, and the protocol will present all active protocols. Signed-off-by:
-
Mauro Carvalho Chehab authored
Some devices have in-hardware Remote Controller decoder, while others need a software decoder to get the IR code. As each software decoder can be enabled/disabled individually, allowing multiple protocol decoding capability. On the other hand, hardware decoders have a limited protocol support, often being able of decoding just one protocol each time. So, each type needs a different set of capabilities to control the supported protocol(s). Signed-off-by: -
David Härdeman authored
When the remote controller class is anyway being renamed from ir to rc this would be a good time to also rename the devices from rcrcvX to rcX. I know we haven't reached any agreement on whether transmission will eventually be handled by the same device, but this change will at least make the device name non-receive-specific which will make it possible in the future (and if a different approach is finally agreed upon, the device name still works). Signed-off-by:
-
Mauro Carvalho Chehab authored
Some spinlocks are not properly initialized on ir core: [ 471.714132] BUG: spinlock bad magic on CPU#0, modprobe/1899 [ 471.719838] lock: f92a08ac, .magic: 00000000, .owner: <none>/-1, .owner_cpu: 0 [ 471.727301] Pid: 1899, comm: modprobe Not tainted 2.6.33 #36 [ 471.733062] Call Trace: [ 471.735537] [<c1498793>] ? printk+0x1d/0x22 [ 471.739866] [<c12694e3>] spin_bug+0xa3/0xf0 [ 471.744224] [<c126962d>] do_raw_spin_lock+0x7d/0x160 [ 471.749364] [<f92a01ff>] ? ir_rc5_register+0x6f/0xf0 [ir_rc5_decoder] So, use static initialization for the static spinlocks, instead of the dynamic ones (currently used), as proposed by David Härdeman on one of his RFC patches. Signed-off-by:
-
