Skip to content

L
linux
Switch branch/tag
  1. 06 Mar, 2017 9 commits
    • Tejun Heo's avatar
      libata: apply MAX_SEC_1024 to all CX1-JB*-HP devices · f24c4f60
      Tejun Heo authored 
      [ Upstream commit e0edc8c5 ]

Marko reports that CX1-JB512-HP shows the same timeout issues as
CX1-JB256-HP.  Let's apply MAX_SEC_128 to all devices in the series.
Signed-off-by: default avatarTejun Heo <tj@kernel.org>
Reported-by: default avatarMarko Koski-Vähälä <marko@koski-vahala.com>
Cc: stable@vger.kernel.org # v3.19+
Signed-off-by: default avatarSasha Levin <alexander.levin@verizon.com>
      f24c4f60
    • Greg Kroah-Hartman's avatar
      HID: hid-cypress: validate length of report · e0fb4ae6
      Greg Kroah-Hartman authored 
      [ Upstream commit 1ebb7114 ]

Make sure we have enough of a report structure to validate before
looking at it.
Reported-by: default avatarBenoit Camredon <benoit.camredon@airbus.com>
Tested-by: default avatarBenoit Camredon <benoit.camredon@airbus.com>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: default avatarJiri Kosina <jkosina@suse.cz>
Signed-off-by: default avatarSasha Levin <alexander.levin@verizon.com>
      e0fb4ae6
    • Guenter Roeck's avatar
      Input: elants_i2c - avoid divide by 0 errors on bad touchscreen data · 63d75fa7
      Guenter Roeck authored 
      [ Upstream commit 1c3415a0 ]

The following crash may be seen if bad data is received from the
touchscreen.

[ 2189.425150] elants_i2c i2c-ELAN0001:00: unknown packet ff ff ff ff
[ 2189.430738] divide error: 0000 [#1] PREEMPT SMP
[ 2189.434679] gsmi: Log Shutdown Reason 0x03
[ 2189.434689] Modules linked in: ip6t_REJECT nf_reject_ipv6 rfcomm evdi
uinput uvcvideo cmac videobuf2_vmalloc videobuf2_memops snd_hda_codec_hdmi
i2c_dev videobuf2_core snd_soc_sst_cht_bsw_rt5645 snd_hda_intel
snd_intel_sst_acpi btusb btrtl btbcm btintel bluetooth snd_soc_sst_acpi
snd_hda_codec snd_intel_sst_core snd_hwdep snd_soc_sst_mfld_platform
snd_hda_core snd_soc_rt5645 memconsole_x86_legacy memconsole zram snd_soc_rl6231
fuse ip6table_filter iwlmvm iwlwifi iwl7000_mac80211 cfg80211 iio_trig_sysfs
joydev cros_ec_sensors cros_ec_sensors_core industrialio_triggered_buffer
kfifo_buf industrialio snd_seq_midi snd_seq_midi_event snd_rawmidi snd_seq
snd_seq_device ppp_async ppp_generic slhc tun
[ 2189.434866] CPU: 0 PID: 106 Comm: irq/184-ELAN000 Tainted: G        W
3.18.0-13101-g57e8190 #1
[ 2189.434883] Hardware name: GOOGLE Ultima, BIOS Google_Ultima.7287.131.43 07/20/2016
[ 2189.434898] task: ffff88017a0b6d80 ti: ffff88017a2bc000 task.ti: ffff88017a2bc000
[ 2189.434913] RIP: 0010:[<ffffffffbecc48d5>]  [<ffffffffbecc48d5>] elants_i2c_irq+0x190/0x200
[ 2189.434937] RSP: 0018:ffff88017a2bfd98  EFLAGS: 00010293
[ 2189.434948] RAX: 0000000000000000 RBX: ffff88017a967828 RCX: ffff88017a9678e8
[ 2189.434962] RDX: 0000000000000000 RSI: 0000000000000246 RDI: 0000000000000000
[ 2189.434975] RBP: ffff88017a2bfdd8 R08: 00000000000003e8 R09: 0000000000000000
[ 2189.434989] R10: 0000000000000000 R11: 000000000044a2bd R12: ffff88017a991800
[ 2189.435001] R13: ffffffffbe8a2a53 R14: ffff88017a0b6d80 R15: ffff88017a0b6d80
[ 2189.435011] FS:  0000000000000000(0000) GS:ffff88017fc00000(0000) knlGS:0000000000000000
[ 2189.435022] CS:  0010 DS: 0000 ES: 0000 CR0: 000000008005003b
[ 2189.435030] CR2: 00007f678d94b000 CR3: 000000003f41a000 CR4: 00000000001007f0
[ 2189.435039] Stack:
[ 2189.435044]  ffff88017a2bfda8 ffff88017a9678e8 646464647a2bfdd8 0000000006e09574
[ 2189.435060]  0000000000000000 ffff88017a088b80 ffff88017a921000 ffffffffbe8a2a53
[ 2189.435074]  ffff88017a2bfe08 ffffffffbe8a2a73 ffff88017a0b6d80 0000000006e09574
[ 2189.435089] Call Trace:
[ 2189.435101]  [<ffffffffbe8a2a53>] ? irq_thread_dtor+0xa9/0xa9
[ 2189.435112]  [<ffffffffbe8a2a73>] irq_thread_fn+0x20/0x40
[ 2189.435123]  [<ffffffffbe8a2be1>] irq_thread+0x14e/0x222
[ 2189.435135]  [<ffffffffbee8cbeb>] ? __schedule+0x3b3/0x57a
[ 2189.435145]  [<ffffffffbe8a29aa>] ? wake_threads_waitq+0x2d/0x2d
[ 2189.435156]  [<ffffffffbe8a2a93>] ? irq_thread_fn+0x40/0x40
[ 2189.435168]  [<ffffffffbe87c385>] kthread+0x10e/0x116
[ 2189.435178]  [<ffffffffbe87c277>] ? __kthread_parkme+0x67/0x67
[ 2189.435189]  [<ffffffffbee900ac>] ret_from_fork+0x7c/0xb0
[ 2189.435199]  [<ffffffffbe87c277>] ? __kthread_parkme+0x67/0x67
[ 2189.435208] Code: ff ff eb 73 0f b6 bb c1 00 00 00 83 ff 03 7e 13 49 8d 7c
24 20 ba 04 00 00 00 48 c7 c6 8a cd 21 bf eb 4d 0f b6 83 c2 00 00 00 99 <f7> ff
83 f8 37 75 15 48 6b f7 37 4c 8d a3 c4 00 00 00 4c 8d ac
[ 2189.435312] RIP  [<ffffffffbecc48d5>] elants_i2c_irq+0x190/0x200
[ 2189.435323]  RSP <ffff88017a2bfd98>
[ 2189.435350] ---[ end trace f4945345a75d96dd ]---
[ 2189.443841] Kernel panic - not syncing: Fatal exception
[ 2189.444307] Kernel Offset: 0x3d800000 from 0xffffffff81000000
	(relocation range: 0xffffffff80000000-0xffffffffbfffffff)
[ 2189.444519] gsmi: Log Shutdown Reason 0x02

The problem was seen with a 3.18 based kernel, but there is no reason
to believe that the upstream code is safe.

Fixes: 66aee900 ("Input: add support for Elan eKTH I2C touchscreens")
Signed-off-by: default avatarGuenter Roeck <linux@roeck-us.net>
Cc: stable@vger.kernel.org
Signed-off-by: default avatarDmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: default avatarSasha Levin <alexander.levin@verizon.com>
      63d75fa7
    • Rolf Eike Beer's avatar
      selftests: do not require bash to run netsocktests testcase · eb7a3d89
      Rolf Eike Beer authored 
      [ Upstream commit 3659f98b ]

Nothing in this minimal script seems to require bash. We often run these
tests on embedded devices where the only shell available is the busybox
ash. Use sh instead.
Signed-off-by: default avatarRolf Eike Beer <eb@emlix.com>
Cc: stable@vger.kernel.org
Signed-off-by: default avatarShuah Khan <shuahkh@osg.samsung.com>
Signed-off-by: default avatarSasha Levin <alexander.levin@verizon.com>
      eb7a3d89
    • Rolf Eike Beer's avatar
      selftests: do not require bash for the generated test · 6d5a0b3b
      Rolf Eike Beer authored 
      [ Upstream commit a2b1e8a2 ]

Nothing in this minimal script seems to require bash. We often run these
tests on embedded devices where the only shell available is the busybox
ash. Use sh instead.
Signed-off-by: default avatarRolf Eike Beer <eb@emlix.com>
Cc: stable@vger.kernel.org
Signed-off-by: default avatarShuah Khan <shuahkh@osg.samsung.com>
Signed-off-by: default avatarSasha Levin <alexander.levin@verizon.com>
      6d5a0b3b
    • Alan Stern's avatar
      USB: fix problems with duplicate endpoint addresses · b0de742a
      Alan Stern authored 
      [ Upstream commit 0a8fd134 ]

When checking a new device's descriptors, the USB core does not check
for duplicate endpoint addresses.  This can cause a problem when the
sysfs files for those endpoints are created; trying to create multiple
files with the same name will provoke a WARNING:

WARNING: CPU: 2 PID: 865 at fs/sysfs/dir.c:31 sysfs_warn_dup+0x8a/0xa0
sysfs: cannot create duplicate filename
'/devices/platform/dummy_hcd.0/usb2/2-1/2-1:64.0/ep_05'
Kernel panic - not syncing: panic_on_warn set ...

CPU: 2 PID: 865 Comm: kworker/2:1 Not tainted 4.9.0-rc7+ #34
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Bochs 01/01/2011
Workqueue: usb_hub_wq hub_event
 ffff88006bee64c8 ffffffff81f96b8a ffffffff00000001 1ffff1000d7dcc2c
 ffffed000d7dcc24 0000000000000001 0000000041b58ab3 ffffffff8598b510
 ffffffff81f968f8 ffffffff850fee20 ffffffff85cff020 dffffc0000000000
Call Trace:
 [<     inline     >] __dump_stack lib/dump_stack.c:15
 [<ffffffff81f96b8a>] dump_stack+0x292/0x398 lib/dump_stack.c:51
 [<ffffffff8168c88e>] panic+0x1cb/0x3a9 kernel/panic.c:179
 [<ffffffff812b80b4>] __warn+0x1c4/0x1e0 kernel/panic.c:542
 [<ffffffff812b8195>] warn_slowpath_fmt+0xc5/0x110 kernel/panic.c:565
 [<ffffffff819e70ca>] sysfs_warn_dup+0x8a/0xa0 fs/sysfs/dir.c:30
 [<ffffffff819e7308>] sysfs_create_dir_ns+0x178/0x1d0 fs/sysfs/dir.c:59
 [<     inline     >] create_dir lib/kobject.c:71
 [<ffffffff81fa1b07>] kobject_add_internal+0x227/0xa60 lib/kobject.c:229
 [<     inline     >] kobject_add_varg lib/kobject.c:366
 [<ffffffff81fa2479>] kobject_add+0x139/0x220 lib/kobject.c:411
 [<ffffffff82737a63>] device_add+0x353/0x1660 drivers/base/core.c:1088
 [<ffffffff82738d8d>] device_register+0x1d/0x20 drivers/base/core.c:1206
 [<ffffffff82cb77d3>] usb_create_ep_devs+0x163/0x260 drivers/usb/core/endpoint.c:195
 [<ffffffff82c9f27b>] create_intf_ep_devs+0x13b/0x200 drivers/usb/core/message.c:1030
 [<ffffffff82ca39d3>] usb_set_configuration+0x1083/0x18d0 drivers/usb/core/message.c:1937
 [<ffffffff82cc9e2e>] generic_probe+0x6e/0xe0 drivers/usb/core/generic.c:172
 [<ffffffff82caa7fa>] usb_probe_device+0xaa/0xe0 drivers/usb/core/driver.c:263

This patch prevents the problem by checking for duplicate endpoint
addresses during enumeration and skipping any duplicates.
Signed-off-by: default avatarAlan Stern <stern@rowland.harvard.edu>
Reported-by: default avatarAndrey Konovalov <andreyknvl@google.com>
Tested-by: default avatarAndrey Konovalov <andreyknvl@google.com>
CC: <stable@vger.kernel.org>
Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: default avatarSasha Levin <alexander.levin@verizon.com>
      b0de742a
    • Oliver Neukum's avatar
      usb: storage: unusual_uas: Add JMicron JMS56x to unusual device · d3258941
      Oliver Neukum authored 
      [ Upstream commit 674aea07 ]

This device gives the following error on detection.
xhci_hcd 0000:00:11.0: ERROR Transfer event for disabled endpoint or
incorrect stream ring

The same error is not seen when it is added to unusual_device
list with US_FL_NO_REPORT_OPCODES passed.
Signed-off-by: default avatarGeorge Cherian <george.cherian@cavium.com>
Signed-off-by: default avatarOliver Neukum <oneukun@suse.com>
CC: stable@vger.kernel.org
Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: default avatarSasha Levin <alexander.levin@verizon.com>
      d3258941
    • Bin Liu's avatar
      usb: musb: dsps: implement clear_ep_rxintr() callback · 0f6b70a5
      Bin Liu authored 
      [ Upstream commit c48400ba ]

During dma teardown for dequque urb, if musb load is high, musb might
generate bogus rx ep interrupt even when the rx fifo is flushed. In such
case any of the follow log messages could happen.

    musb_host_rx 1853: BOGUS RX2 ready, csr 0000, count 0

    musb_host_rx 1936: RX3 dma busy, csr 2020

As mentioned in the current inline comment, clearing ep interrupt in the
teardown path avoids the bogus interrupt, so implement clear_ep_rxintr()
callback.

This bug seems to be existing since the initial driver for musb support,
but I only validated the fix back to v4.1, so only cc stable for v4.1+.

cc: stable@vger.kernel.org # 4.1+
Signed-off-by: default avatarBin Liu <b-liu@ti.com>
Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: default avatarSasha Levin <alexander.levin@verizon.com>
      0f6b70a5
    • Bin Liu's avatar
      usb: musb: core: add clear_ep_rxintr() to musb_platform_ops · 088f5497
      Bin Liu authored 
      [ Upstream commit 6def85a3 ]

During dma teardown for dequque urb, if musb load is high, musb might
generate bogus rx ep interrupt even when the rx fifo is flushed. In such
case any of the follow log messages could happen.

	musb_host_rx 1853: BOGUS RX2 ready, csr 0000, count 0

	musb_host_rx 1936: RX3 dma busy, csr 2020

As mentioned in the current inline comment, clearing ep interrupt in the
teardown path avoids the bogus interrupt.

Clearing ep interrupt is platform dependent, so this patch adds a
platform callback to allow glue driver to clear the ep interrupt.

This bug seems to be existing since the initial driver for musb support,
but I only validated the fix back to v4.1, so only cc stable for v4.1+.

cc: stable@vger.kernel.org # 4.1+
Signed-off-by: default avatarBin Liu <b-liu@ti.com>
Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: default avatarSasha Levin <alexander.levin@verizon.com>
      088f5497
  3. 03 Mar, 2017 31 commits
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7