- 28 Aug, 2019 12 commits
-
-
Christoph Hellwig authored
This switches to using common code for the DMA allocations, including potential use of the CMA allocator if configured. Switching to the generic code enables DMA allocations from atomic context, which is required by the DMA API documentation, and also adds various other minor features drivers start relying upon. It also makes sure we have on tested code base for all architectures that require uncached pte bits for coherent DMA allocations. Another advantage is that consistent memory allocations now share the general vmalloc pool instead of needing an explicit careout from it. Signed-off-by:
Christoph Hellwig <hch@lst.de> Tested-by: Christophe Leroy <christophe.leroy@c-s.fr> # tested on 8xx Signed-off-by:
Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20190814132230.31874-2-hch@lst.de
-
Nicholas Piggin authored
There is support for the kernel to execute the 'sc 0' instruction and make a system call to itself. This is a relic that is unused in the tree, therefore untested. It's also highly questionable for modules to be doing this. Signed-off-by:
Nicholas Piggin <npiggin@gmail.com> Signed-off-by:
-
Nicholas Piggin authored
Commit 3033f14a ("clone: support passing tls argument via C rather than pt_regs magic") introduced the HAVE_COPY_THREAD_TLS option. Use it to avoid a subtle assumption about the argument ordering of clone type syscalls. Signed-off-by:
-
Christophe Leroy authored
Only 601 and E200 have CPU_FTR_COHERENT_ICACHE. Just use #ifdefs instead of feature fixup. Signed-off-by:
Christophe Leroy <christophe.leroy@c-s.fr> Signed-off-by:
-
Christophe Leroy authored
Only 601 and e200 have unified I/D cache. Drop the feature and use CONFIG_PPC_BOOK3S_601 and CONFIG_E200. Signed-off-by:
-
Christophe Leroy authored
Use CONFIG_PPC_BOOK3S_601 instead of reading PVR to know if it is a 601 or not. Signed-off-by:
-
Christophe Leroy authored
CPU_FTR_USE_RTC feature only applies to powerpc601. Drop this feature and replace it with tests on CONFIG_PPC_BOOK3S_601. Signed-off-by:
-
Christophe Leroy authored
Now that 601 is exclusive from other 6xx, CPU_FTR_601 and associated fixups are useless. Drop this feature and use #ifdefs instead. Signed-off-by:
-
Christophe Leroy authored
Powerpc 601 is rather old powerpc which as some important limitations compared to other book3s/32 powerpcs: - No Timebase. - Common BATs for instruction and data. - No execution protection in segment registers. - No RI bit in MSR - ... It is starting to be difficult and cumbersome to maintain kernels that are compatible both with 601 and other 6xx cores. Create a compiletime option to exclusively select either powerpc 601 or other 6xx. Signed-off-by:
-
Christophe Leroy authored
Today, the STACK_END_MAGIC is set on init_stack in start_kernel(). To avoid a false 'Thread overran stack, or stack corrupted' message on early Oopses, setup STACK_END_MAGIC as soon as possible. Signed-off-by:
-
Christophe Leroy authored
The code which fixups the DAR on TLB errors for dbcX instructions has a self-modifying code alternative that has never been used. Drop it. Signed-off-by:
Joakim Tjernlund <joakim.tjernlund@infinera.com> Signed-off-by:
-
Christophe Leroy authored
Prior to commit 1bd98d7fbaf5 ("ppc64: Update BUG handling based on ppc32"), BUG() family was using BUG_ILLEGAL_INSTRUCTION which was an invalid instruction opcode to trap into program check exception. That commit converted them to using standard trap instructions, but prom/prom_init and their PROM_BUG() macro were left over. head_64.S and exception-64s.S were left aside as well. Convert them to using the standard BUG infrastructure. Signed-off-by:
-
- 27 Aug, 2019 20 commits
-
-
Christopher M. Riedl authored
Booting w/ppc64le_defconfig + CONFIG_PREEMPT on bare metal results in the oops below due to calling into __spin_yield() when not running in an SPLPAR, which means lppaca pointers are NULL. We fixed a similar case previously in commit a6201da3 ("powerpc: Fix oops due to bad access of lppaca on bare metal"), by adding SPLPAR checks in lppaca_shared_proc(). However when PREEMPT is enabled we can call __spin_yield() directly from arch_spin_yield(). To fix it add spin_yield() and rw_yield() which check that shared-processor LPAR is enabled before calling the SPLPAR-only implementation of each. BUG: Kernel NULL pointer dereference at 0x00000100 Faulting instruction address: 0xc000000000097f88 Oops: Kernel access of bad area, sig: 7 [#1] LE PAGE_SIZE=64K MMU=Radix MMU=Hash PREEMPT SMP NR_CPUS=2048 NUMA PowerNV Modules linked in: CPU: 0 PID: 2 Comm: kthreadd Not tainted 5.2.0-rc6-00491-g249155c2 #28 NIP: c000000000097f88 LR: c000000000c07a88 CTR: c00000000015ca10 REGS: c0000000727079f0 TRAP: 0300 Not tainted (5.2.0-rc6-00491-g249155c2) MSR: 9000000002009033 <SF,HV,VEC,EE,ME,IR,DR,RI,LE> CR: 84000424 XER: 20040000 CFAR: c000000000c07a84 DAR: 0000000000000100 DSISR: 00080000 IRQMASK: 1 GPR00: c000000000c07a88 c000000072707c80 c000000001546300 c00000007be38a80 GPR04: c0000000726f0c00 0000000000000002 c00000007279c980 0000000000000100 GPR08: c000000001581b78 0000000080000001 0000000000000008 c00000007279c9b0 GPR12: 0000000000000000 c000000001730000 c000000000142558 0000000000000000 GPR16: 0000000000000000 0000000000000000 0000000000000000 0000000000000000 GPR20: 0000000000000000 0000000000000000 0000000000000000 0000000000000000 GPR24: c00000007be38a80 c000000000c002f4 0000000000000000 0000000000000000 GPR28: c000000072221a00 c0000000726c2600 c00000007be38a80 c00000007be38a80 NIP [c000000000097f88] __spin_yield+0x48/0xa0 LR [c000000000c07a88] __raw_spin_lock+0xb8/0xc0 Call Trace: [c000000072707c80] [c000000072221a00] 0xc000000072221a00 (unreliable) [c000000072707cb0] [c000000000bffb0c] __schedule+0xbc/0x850 [c000000072707d70] [c000000000c002f4] schedule+0x54/0x130 [c000000072707da0] [c0000000001427dc] kthreadd+0x28c/0x2b0 [c000000072707e20] [c00000000000c1cc] ret_from_kernel_thread+0x5c/0x70 Instruction dump: 4d9e0020 552a043e 210a07ff 79080fe0 0b080000 3d020004 3908b878 794a1f24 e8e80000 7ce7502a e8e70000 38e70100 <7ca03c2c> 70a70001 78a50020 4d820020 ---[ end trace 474d6b2b8fc5cb7e ]--- Fixes: 499dcd41 ("powerpc/64s: Allocate LPPACAs individually") Signed-off-by:
Christopher M. Riedl <cmr@informatik.wtf> [mpe: Reword change log a bit] Signed-off-by:
-
Christopher M. Riedl authored
The __rw_yield and __spin_yield locks only pertain to SPLPAR mode. Rename them to make this relationship obvious. Signed-off-by:
Andrew Donnellan <ajd@linux.ibm.com> Signed-off-by:
-
Christopher M. Riedl authored
Determining if a processor is in shared processor mode is not a constant so don't hide it behind a #define. Signed-off-by:
-
Christophe Leroy authored
Optimise LOAD_REG_IMMEDIATE_SYM() using a temporary register to parallelise operations. It reduces the path from 5 to 3 instructions. Suggested-by:
Segher Boessenkool <segher@kernel.crashing.org> Signed-off-by:
-
Christophe Leroy authored
LOAD_MSR_KERNEL() and LOAD_REG_IMMEDIATE() are doing the same thing in the same way. Drop LOAD_MSR_KERNEL() Signed-off-by:
-
Christophe Leroy authored
Today LOAD_REG_IMMEDIATE() is a basic #define which loads all parts on a value into a register, including the parts that are NUL. This means always 2 instructions on PPC32 and always 5 instructions on PPC64. And those instructions cannot run in parallele as they are updating the same register. Ex: LOAD_REG_IMMEDIATE(r1,THREAD_SIZE) in head_64.S results in: 3c 20 00 00 lis r1,0 60 21 00 00 ori r1,r1,0 78 21 07 c6 rldicr r1,r1,32,31 64 21 00 00 oris r1,r1,0 60 21 40 00 ori r1,r1,16384 Rewrite LOAD_REG_IMMEDIATE() with GAS macro in order to skip the parts that are NUL. Rename existing LOAD_REG_IMMEDIATE() as LOAD_REG_IMMEDIATE_SYM() and use that one for loading value of symbols which are not known at compile time. Now LOAD_REG_IMMEDIATE(r1,THREAD_SIZE) in head_64.S results in: 38 20 40 00 li r1,16384 Signed-off-by:
-
Christophe Leroy authored
ioremap does things differently depending on whether SLAB is available or not at different levels. Try to separate the early path from the beginning. Signed-off-by:
-
Christophe Leroy authored
PPC32 and PPC64 are doing the same once SLAB is available. Create a do_ioremap() function that calls get_vm_area and do the mapping. For PPC64, we add the 4K PFN hack sanity check to __ioremap_caller() in order to avoid using __ioremap_at(). Other checks in __ioremap_at() are irrelevant for __ioremap_caller(). On PPC64, VM area is allocated in the range [ioremap_bot ; IOREMAP_END] On PPC32, VM area is allocated in the range [VMALLOC_START ; VMALLOC_END] Lets define IOREMAP_START is ioremap_bot for PPC64, and alias IOREMAP_START/END to VMALLOC_START/END on PPC32 Signed-off-by:
-
Christophe Leroy authored
book3s64's ioremap_range() is almost same as fallback ioremap_range(), except that it calls radix__ioremap_range() when radix is enabled. radix__ioremap_range() is also very similar to the other ones, expect that it calls ioremap_page_range when slab is available. PPC32 __ioremap_caller() have a loop doing the same thing as ioremap_range() so use it on PPC32 as well. Lets keep only one version of ioremap_range() which calls ioremap_page_range() on all platforms when slab is available. At the same time, drop the nid parameter which is not used. Signed-off-by:
-
Christophe Leroy authored
Create ioremap_32.c and ioremap_64.c and move respective ioremap functions out of pgtable_32.c and pgtable_64.c In the meantime, fix a few comments and changes a printk() to pr_warn(). Also fix a few oversplitted lines. Signed-off-by:
-
Christophe Leroy authored
Drop multiple definitions of ioremap_bot and make one common to all subarches. Only CONFIG_PPC_BOOK3E_64 had a global static init value for ioremap_bot. Now ioremap_bot is set in early_init_mmu_global(). Signed-off-by:
-
Christophe Leroy authored
Both ioremap_prot() are idenfical, move them into ioremap.c Signed-off-by:
-
Christophe Leroy authored
ioremap(), ioremap_wc() and ioremap_coherent() are now identical on PPC32 and PPC64 as iowa_is_active() will always return false on PPC32. Move them into a new common location called ioremap.c Signed-off-by:
-
Christophe Leroy authored
ppc_md.ioremap() is only used for I/O workaround on CELL platform, so indirect function call can be avoided. This patch reworks the io-workaround and ioremap() functions to use the global 'io_workaround_inited' flag for the activation of io-workaround. When CONFIG_PPC_IO_WORKAROUNDS or CONFIG_PPC_INDIRECT_MMIO are not selected, the I/O workaround ioremap() voids and the global flag is not used. Signed-off-by:
-
Christophe Leroy authored
__ioremap() is not used anymore, drop it. Suggested-by:
-
Christophe Leroy authored
ppc_md.iounmap() is never set, drop it. Once ppc_md.iounmap() is gone, iounmap() remains the only user of __iounmap() and iounmap() does nothing else than calling __iounmap(). So drop iounmap() and make __iounmap() the new iounmap(). Reviewed-by:
-
Christophe Leroy authored
__ioremap() is similar to ioremap_prot() except that ioremap_prot() does a few sanity changes in addition. The flags used by PS3 are not impacted by those changes so for PS3 both functions are equivalent. At the same time, drop parts of the comment that have been invalid since commit e58e87ad ("powerpc/mm: Update _PAGE_KERNEL_RO") Suggested-by:
-
Christoph Hellwig authored
The on chip memory allocator is entirely unused in the kernel tree. Signed-off-by:
-
Christophe Leroy authored
Book3E doesn't have SPRN_SPURR/SPRN_PURR. Activating ARCH_HAS_SCALED_CPUTIME is just wasting CPU time. Signed-off-by:
-
Christopher M. Riedl authored
Add support for disabling the kernel implemented spectre v2 mitigation (count cache flush on context switch) via the nospectre_v2 and mitigations=off cmdline options. Suggested-by:
-
- 26 Aug, 2019 2 commits
-
-
Gustavo Romero authored
TM test tm-unavailable must take into account aborts due to host aborting a transactin because of a facility unavailable exception, just like it already does for aborts on reschedules (TM_CAUSE_KVM_RESCHED). Reported-by:
Desnes A. Nunes do Rosario <desnesn@linux.ibm.com> Tested-by:
Gustavo Romero <gromero@linux.vnet.ibm.com> Signed-off-by:
-
Gustavo Romero authored
Currently TM signal context tests for GPR, FPR, VMX, and VSX registers print wrong register numbers (wrongly starting from register 0 instead of the first register in the non-volatile subset). Besides it the output when a mismatch happens is poor giving not much information about which context and which register mismatches, because it prints both contexts at the same time and not a comparison between the value that mismatches and the value expected and, moreover, it stops printing on the first mismatch, but it's important to know if there are other mismatches happening beyond the first one. For instance, this is the current output when a mismatch happens: test: tm_signal_context_chk_gpr tags: git_version:v5.2-8249-g02e970fae465-dirty Failed on 0 GPR 1 or 18446744073709551615 failure: tm_signal_context_chk_gpr test: tm_signal_context_chk_fpu tags: git_version:v5.2-8248-g09c289e3ef80 Failed on 0 FP -1 or -1 failure: tm_signal_context_chk_fpu test: tm_signal_context_chk_vmx tags: git_version:v5.2-8248-g09c289e3ef80 Failed on 0 vmx 0xfffffffffffffffefffffffdfffffffc vs 0xfffffffffffffffefffffffdfffffffc failure: tm_signal_context_chk_vmx test: tm_signal_context_chk_vsx tags: git_version:v5.2-8248-g09c289e3ef80 Failed on 0 vsx 0xfffffffffefffffffdfffffffcffffff vs 0xfffffffffefffffffdfffffffcffffff failure: tm_signal_context_chk_vsx This commit fixes the register numbers printed and enhances the error output by providing a full list of mismatching registers separated by the context (non-speculative or speculative context), for example: test: tm_signal_context_chk_gpr tags: git_version:v5.2-8249-g02e970fae465-dirty GPR14 (1st context) == 1 instead of -1 (expected) GPR15 (1st context) == 2 instead of -2 (expected) GPR14 (2nd context) == 0 instead of 18446744073709551615 (expected) GPR15 (2nd context) == 0 instead of 18446744073709551614 (expected) failure: tm_signal_context_chk_gpr test: tm_signal_context_chk_fpu tags: git_version:v5.2-8249-g02e970fae465-dirty FPR14 (1st context) == -1 instead of 1 (expected) FPR15 (1st context) == -2 instead of 2 (expected) failure: tm_signal_context_chk_fpu test: tm_signal_context_chk_vmx tags: git_version:v5.2-8249-g02e970fae465-dirty VMX20 (1st context) == 0xfffffffffffffffefffffffdfffffffc instead of 0x00000001000000020000000300000004 (expected) VMX21 (1st context) == 0xfffffffbfffffffafffffff9fffffff8 instead of 0x00000005000000060000000700000008 (expected) failure: tm_signal_context_chk_vmx test: tm_signal_context_chk_vsx tags: git_version:v5.2-8249-g02e970fae465-dirty VSX20 (1st context) == 0xfffffffffefffffffdfffffffcffffff instead of 0x00000001000000020000000300000004 (expected) VSX21 (1st context) == 0xfbfffffffafffffff9fffffff8ffffff instead of 0x00000005000000060000000700000008 (expected) failure: tm_signal_context_chk_vsx Finally, this commit adds comments to the tests in the hope that it will help people not so familiar with TM understand the tests. Signed-off-by:
Gustavo Romero <gromero@linux.ibm.com> Signed-off-by:
-
- 22 Aug, 2019 6 commits
-
-
Daniel Axtens authored
While reviewing lockdown patches, I discovered that we still enable /dev/port (CONFIG_DEVPORT) in skiroot. /dev/port is used for old x86 style IO accesses. It's set up in drivers/char/mem.c, and is only created if arch_has_dev_port() returns true. Per arch/powerpc/include/asm/io.h, on PPC64 with PCI, this is only true if there's a legacy ISA bridge. Even if a system has a legacy ISA bridge installed, we have no business accessing it in skiroot. Deselect CONFIG_DEVPORT for skiroot. Signed-off-by:
Daniel Axtens <dja@axtens.net> [mpe: Incorporate emailed comments into the change log] Signed-off-by:
-
Gustavo Romero authored
Currently some binary files which are generated when tests are compiled are not ignored by git, so 'git status' catch them. For copyloops test, fix wrong binary names already in .gitignore. For ptrace, security, and stringloops tests add missing binary names to the .gitignore file. Signed-off-by:
-
Gustavo Romero authored
Document all options currently supported by xmon debugger. Signed-off-by:
-
Sam Bobroff authored
Simplify some needlessly complicated boolean logic in eeh_add_to_parent_pe(). Signed-off-by:
Sam Bobroff <sbobroff@linux.ibm.com> Signed-off-by:
-
Sam Bobroff authored
There are no users of the early-out return value from eeh_pe_dev_traverse(), so remove it. Signed-off-by:
-
Sam Bobroff authored
If a PCI device is removed during eeh_pe_report_edev(), between the calls to device_lock() and device_unlock(), edev->pdev will change and cause a crash as the wrong mutex is released. To correct this, hold the PCI rescan/remove lock while taking a copy of edev->pdev and performing a get_device() on it. Use this value to release the mutex, but also pass it through to the device driver's EEH handlers so that they always see the same device. Signed-off-by:
-
