This patch removes commented-out code and the comments
that refer to it to facilitate code review.
Signed-off-by: Xenia Ragiadakou <burzalodowa@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Found using coccinelle tool.
Signed-off-by: Vladimir Cernov <gg.kaspersky@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Remove the dev_desc_t typedef for the dev_desc struct in bpctl_mod.c,
resolving a checkpatch.pl warning. In fact, we can use an anonymous
struct, since it's only used in the single dev_desc array of device
descriptions, whose definition follows immediately.
Signed-off-by: Chad Williamson <chad@dahc.us>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Remove the bpmod_info_t typedef from bpctl_mod.c, replacing it with
struct bpmod_info.
Signed-off-by: Chad Williamson <chad@dahc.us>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Replace the bpctl_dev_t typdef in bpctl_mod.c with struct bpctl_dev
for coding style compliance.
Signed-off-by: Chad Williamson <chad@dahc.us>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The changes in this patch will fix the binder interface for use on 64bit
machines and stand as the base of the 64bit compat support. The changes
apply to the structures that are passed between the kernel and
userspace.

Most of the  changes applied mirror the change to struct binder_version
where there is no need for a 64bit wide protocol_version(on 64bit
machines). The change inlines with the existing 32bit userspace(the
structure has the same size) and simplifies the compat layer such that
the same handler can service the BINDER_VERSION ioctl.

Other changes make use of kernel types as well as user-exportable ones
and fix format specifier issues.

The changes do not affect existing 32bit ABI.
Signed-off-by: Serban Constantinescu <serban.constantinescu@arm.com>
Acked-by: Arve Hjønnevåg <arve@android.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Since this driver is meant to be used on different types of processors
and a portable driver should specify the size a variable expects to be
this patch changes the types used throughout the binder interface.

We use "userspace" types since this header will be exported and used by
the Android filesystem.

The patch does not change in any way the functionality of the binder driver.
Signed-off-by: Serban Constantinescu <serban.constantinescu@arm.com>
Acked-by: Arve Hjønnevåg <arve@android.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The Android userspace aligns the data written to the binder buffers to
4bytes. Thus for 32bit platforms or 64bit platforms running an 32bit
Android userspace we can have a buffer looking like this:

platform    buffer(binder_cmd   pointer)      size
32/32                 32b         32b          8B
64/32                 32b         64b          12B
64/64                 32b         64b          12B

Thus the kernel needs to check that the buffer size is aligned to 4bytes
not to (void *) that will be 8bytes on 64bit machines.

The change does not affect existing 32bit ABI.
Signed-off-by: Serban Constantinescu <serban.constantinescu@arm.com>
Acked-by: Arve Hjønnevåg <arve@android.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

BinderDriverCommands mirror the ioctl usage. Thus the size of the
structure passed through the interface should be used to generate the
ioctl No.

The change reflects the type being passed from the user space-a pointer
to a binder_buffer. This change should not affect the existing 32bit
user space since BC_FREE_BUFFER is computed as:

   #define _IOW(type,nr,size)         \
      ((type) << _IOC_TYPESHIFT) |    \
      ((nr)   << _IOC_NRSHIFT) |      \
      ((size) << _IOC_SIZESHIFT))

and for a 32bit compiler BC_FREE_BUFFER will have the same computed
value. This change will also ease our work in differentiating
BC_FREE_BUFFER from COMPAT_BC_FREE_BUFFER.

The change does not affect existing 32bit ABI.
Signed-off-by: Serban Constantinescu <serban.constantinescu@arm.com>
Acked-by: Arve Hjønnevåg <arve@android.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This change will fix the BINDER_SET_MAX_THREADS ioctl to use __u32
instead of size_t for setting the max threads. Thus using the same
handler for 32 and 64bit kernels.

This value is stored internally in struct binder_proc and set to 15
on open_binder() in the libbinder API(thus no need for a 64bit size_t
on 64bit platforms).

The change does not affect existing 32bit ABI.
Signed-off-by: Serban Constantinescu <serban.constantinescu@arm.com>
Acked-by: Arve Hjønnevåg <arve@android.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This change mirrors the userspace operation where struct binder_write_read
members that specify the buffer size and consumed size are size_t elements.

The patch also fixes the binder_thread_write() and binder_thread_read()
functions prototypes to conform with the definition of binder_write_read.

The changes do not affect existing 32bit ABI.
Signed-off-by: Serban Constantinescu <serban.constantinescu@arm.com>
Acked-by: Arve Hjønnevåg <arve@android.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Rename Kbuild to usual Makefile, consistent with
Kernel build structure.
Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Rupesh Gujare <rupesh.gujare@atmel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Replace macro with inline function.
Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Rupesh Gujare <rupesh.gujare@atmel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Remove old oz_trace & oz_trace2 macro & related header files.
Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Rupesh Gujare <rupesh.gujare@atmel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Introduce new debug macros: oz_dbg, oz_cdev_dbg, oz_pd_dbg
and then replace old oz_trace & oz_trace2 with new macro.
Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Rupesh Gujare <rupesh.gujare@atmel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Remove unnecessary debug logs. Most of these logs
print function name at the start of function, which
are not really required.
Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Rupesh Gujare <rupesh.gujare@atmel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

After migrating ISA DMA support from the "ni_labpc" module to the new
"ni_labpc_isadma" module, the `COMEDI_NI_LABPC_ISA` configuration option
no longer depends on `VIRT_TO_BUS`, so remove the dependency.

(The new `COMEDI_NI_LABPC_ISADMA` option does depend on `VIRT_TO_BUS`
but is not configured manually and is only selected automatically if the
`VIRT_TO_BUS` and `ISA_DMA_API` options are set.)
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

After migrating the ISA DMA handling code to the "ni_labpc_isadma"
module, get rid of an unneeded `#include` and a couple of unused
static variables.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Migrate the code for checking and handling the interrupt status handling
for ISA DMA transfers into new a new function
`labpc_handle_dma_status()` in the "ni_labpc_isadma" module.  Provide a
dummy inline function in "ni_labpc_isadma.h" if the "ni_labpc_isadma"
module is not being built.

The static function `handle_isa_dma()` also needs to move across to the
new module.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Move `labpc_drain_dma()` into the "ni_labpc_isadma" module.  Provide a
dummy inline function in "ni_labpc_isadma.h" if the module is not being
built.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Migrate the code for setting up an ISA DMA transfer into a new function
`labpc_setup_dma()` in the "ni_labpc_isadma" module.  Provide a dummy
inline function in "ni_labpc_isadma.h" if the "ni_labpc_isadma" module
is not being built.

The static function `labpc_suggest_transfer_size()` also needs to move
across to the new module.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The new "ni_labpc_isadma" module will need to access some register
definitions from "ni_labpc.c", which is not part of the module's source.
Move all the register definitions into a new, common header file
"ni_labpc_regs.h".
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Call the new static inline function `labpc_have_dma_chan()` from
`labpc_ai_cmd()` to check if the ISA DMA channel has been initialized,
tidying up the surrounding code and removing an `#ifdef`.  If the
"ni_labpc_isadma" module is not being built, `labpc_have_dma_chan()`
doesn't bother checking the DMA channel and just returns `false`,
allowing the compiler to optimize out a small amount of code.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Add a static inline function to "ni_labpc_isadma.h" to test if a DMA
channel has been set-up, in which case `devpriv->dma_chan` will be
non-zero (where `devpriv` point to the private data for the comedi
device).  If the "ni_labpc_isadma" module is not being built, don't
bother checking `devpriv->dma_chan`; just return `false` as this may
help the compiler to optimize out some unreachable code.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Migrate the code for requesting an ISA DMA channel and a DMA buffer, and
the code for freeing them into two new functions in the
"ni_labpc_isadma" module: `labpc_init_dma_chan()` and
`labpc_free_dma_chan()`.  Dummy inline functions are provided in
"ni_labpc_isadma.h" if the "ni_labpc_isadma" module is not being built.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

It's just an empty module at the moment, selected by COMEDI_NI_LABPC_ISA
&& ISA_DMA_API && VIRT_TO_BUS, but will be populated by later patches to
migrate ISA DMA support for NI Lab-PC cards out of the "ni_labpc"
module.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

`labpc_ai_cmd()` calls `labpc_cancel()` which already sets
`devpriv->cmd3` to 0.  Remove the lines from `labpc_ai_cmd()` that clear
specific bits in `devpriv->cmd3` explicitly as they have no effect.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

If `labpc_attach()` allocates memory for `devpriv->dma_buffer` but fails
to request a DMA channel, it frees `devpriv->dma_buffer` but leaves the
pointer set.  Later, `labpc_detach()` frees `devpriv->dma_buffer` again,
which means it has been freed twice in this case.

Fix it by only setting `devpriv->dma_buffer` in `labpc_attach()` if the
DMA channel was requested successfully.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Low-level comedi drivers registered with the comedi core by
`comedi_driver_register()` are linked together into a simple linked list
headed by the `comedi_drivers` variable and chained by the `next` member
of `struct comedi_driver`.  A driver is removed from the list by
`comedi_driver_unregister()`.  The driver list is iterated through by
`comedi_device_attach()` when the `COMEDI_DEVCONFIG` ioctl is used to
attach a "legacy" device to a driver, and is also iterated through by
`comedi_read()` in "proc.c" when reading "/proc/comedi".

There is currently no protection against items being added or removed
from the list while it is being iterated.  Add a mutex
`comedi_drivers_list_lock` to be locked while adding or removing an item
on the list, or when iterating through the list.

`comedi_driver_unregister()` also checks for and detaches any devices
using the driver.  This is currently done before unlinking the driver
from the list, but it makes more sense to unlink the driver from the
list first to prevent `comedi_device_attach()` attempting to use it, so
move the unlinking part to the start of the function.  Also, in
`comedi_device_attach()` hold on to the mutex until we've finished
attempting to attach the device to avoid it interfering with the
detachment in `comedi_driver_unregister()`.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

'Unregister' functions generally return `void`.
`comedi_driver_unregister()` currently returns an `int` errno value.
Nothing looks at the return value.  Change the return type to `void`.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This driver can support the WinSystems PCM-IO48 PC/104 board. That
board has two 8255 devices providing 48 digital I/O channels.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The Intelligent Instrumentation PCI-20001C board is a legacy PC/XT/AT
8-bit ISA board not a PCI board.  The "PCI" appears to mean "Personal
Computer Instrumentation".

Move the Kconfig option into the COMEDI_ISA group.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Acked-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Some of the comedi files include this header but don't need it.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

All the ioport resources are managed by the comedi core. None of
the drivers depend on <linux/ioport.h>. Remove the includes.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

comedidev.h is the main kernel header for comedi. Every comedi
driver includes this header which then includes a number of
<linux/*> headers. All the drivers need <linux/module.h> and some
of them need <linux/delay.h>. The rest are not needed by any of
the drivers.

Remove all the includes in comedidev.h except for <linux/dma-mapping.h>,
which is needed to pick up the enum dma_data_direction for the
comedi_subdevice definition, and "comedi.h", which is the uapi
header for comedi.

Add <linux/module.h> to all the comedi drivers and <linux/delay.h>
to the couple that need it.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Use the helper function to allocate memory and set the comedi_device
private data pointer.

This removes the dependency on slab.h from most of the drivers so
remove the global #include in comedidev.h and the local #include
in some of the drivers.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Introduce a helper function to allocate memory and set the
comedi_device private data pointer.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This removes a bunch of unused helper macros in the kp30.h file as they
were not being used anywhere, and they better not be used in the future.

Cc: Peng Tao <tao.peng@emc.com>
Cc: Andreas Dilger <andreas.dilger@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

use ERR_CAST() function instead of ERR_PTR() and PTR_ERR()
found using coccinelle and err_cast.cocci
Signed-off-by: Laurent Navet <laurent.navet@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Correct spelling typo in printk within staging/lustre
Signed-off-by: Masanari Iida <standby24x7@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>