When smart51 mode is enabled, auto-mute these surround outputs
as well as the primary line-out.  Also this patch includes minor
clean-ups.
Signed-off-by: Takashi Iwai <tiwai@suse.de>

Unify the VT1709 10ch and 6ch parsers, as well as VT1708B 8ch and 4ch
parsers.  They have no difference now.
Signed-off-by: Takashi Iwai <tiwai@suse.de>

The codecs like VT1708 needs more complicated routing using the mixer
widget rather than the simple selector widgets.
Signed-off-by: Takashi Iwai <tiwai@suse.de>

The surround/CLFE/side DACs on VT1708B and co have no amp but the
connected selector widgets have the amp instead.  Fix the parser to
check these selector widgets for the possible mixer controls as well.
Signed-off-by: Takashi Iwai <tiwai@suse.de>

Fix the check of the multiple loopback-mixer, which gave sometimes
a wrong index assigned to an element even for different names, e.g.
Mic and Front Mic.  Now check the label properly for avoid duplication.
Reported-by: David Henningsson <david.henningsson@canonical.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

The input jacks assigned as the smart51 outputs must be in the same
stack, either rear, front or other.  Also, prefer line-in as the surround
to mic-in.
Signed-off-by: Takashi Iwai <tiwai@suse.de>

Re-route the whole output path when HP-independent mode is changed.
Signed-off-by: Takashi Iwai <tiwai@suse.de>

Fix a issue to create playback volume control if pin has amplifier capability
but not DAC.
Signed-off-by: Lydia Wang <lydiawang@viatech.com.cn>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

Change the order of the output-path list in a way from the DAC to the
target pin.  Also now the list include the target pin, too.

Together with this format change, simplify the arguments of
parse_output_path() function, and fix the initialization in
via_auto_init_output().
Signed-off-by: Takashi Iwai <tiwai@suse.de>

Drop "Capture" prefix from the mic-boost names.
Otherwise some control names can overflow the max name length.
Signed-off-by: Takashi Iwai <tiwai@suse.de>

Conflicts:
	sound/pci/hda/patch_via.c

Create a master volume and mute control of playback for VT1718S.
Signed-off-by: Lydia Wang <lydiawang@viatech.com.cn>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

When switch HP independent mode, mute/unmute connctions of mixer  which is
connected to headphone for VT1718S.
Signed-off-by: Lydia Wang <lydiawang@viatech.com.cn>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

Remove some invalid initial verbs and correct some wrong initial verbs
for VT1718S codec.
Signed-off-by: Lydia Wang <lydiawang@viatech.com.cn>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

The "diverse" Quanta ID 0x0763 is overridden to ALC268_ACER.
This keeps headphone automute and microphone input from operating
on at least one laptop from Opti Systems.
Without the override, the BIOS parser does a fine job setting the
card up and everything works.
Tested-By: Peter Schneider <e.at.chi.kaen@googlemail.com>
Signed-off-by: Tony Vroon <tony@linx.net>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

The reporter, who is running kernel 2.6.38, reports that
he needs to set model=auto for the headphone output to work
correctly.

BugLink: http://bugs.launchpad.net/bugs/761022
Cc: stable@kernel.org (v2.6.38+)
Reported-by: Jo
Signed-off-by: David Henningsson <david.henningsson@canonical.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

Use the existing aa-loop list for simplifying the check for analog
low-current mode.  Also fix the stream count test for playback streams.
Signed-off-by: Takashi Iwai <tiwai@suse.de>

There is no longer virtual kmixer element for NID mapping.
Signed-off-by: Takashi Iwai <tiwai@suse.de>

Signed-off-by: Takashi Iwai <tiwai@suse.de>

When the primary output is the speaker output, rather name it as
"Speaker".  This will be more intuitive.
Signed-off-by: Takashi Iwai <tiwai@suse.de>

Create loopback list dynamically from the parsed input pins for VIA
codecs instead of the fixed arrays.
Signed-off-by: Takashi Iwai <tiwai@suse.de>

Fix the broken detection of smart51 and its handling.
Signed-off-by: Takashi Iwai <tiwai@suse.de>

Now let's add the missing Master control to VIA codecs.
Signed-off-by: Takashi Iwai <tiwai@suse.de>

Issue the init verbs of unsolicited events dynamically from the parsed
results for VIA codecs.  Also, consolidate the unsol handlers for HP
and line-out mutes.
Signed-off-by: Takashi Iwai <tiwai@suse.de>

Similarly like the previous commit, initialize the input-paths dynamically
from the parsed results instead of the fixed array for VIA codecs.
Signed-off-by: Takashi Iwai <tiwai@suse.de>

Instead of fixed array for each codec type, initialize the output path
dynamically from the parsed results.
Signed-off-by: Takashi Iwai <tiwai@suse.de>

Signed-off-by: Takashi Iwai <tiwai@suse.de>

Fix races in handling of HP DAC and independent streams for VIA codecs.
Also, allow the HP output path without front-DAC, and removed
unnecessary activation of HP mixer elements.

This also removes the handling of shared side/HP stream; it's anyway
implemented in a broken way, so we need to re-implement the feature
later...
Signed-off-by: Takashi Iwai <tiwai@suse.de>

Now all codecs use the same parser-path, so we can reduce into a single
auto-parser function.
Signed-off-by: Takashi Iwai <tiwai@suse.de>

Instead of ignoring the invalid pin configuration, return the error.
This will avoid unexpected crash, anyway.
Signed-off-by: Takashi Iwai <tiwai@suse.de>

Create capture-related mixer elements dynamically from the parsed
ADCs and input-pins instead of fixed values for each codec.
Signed-off-by: Takashi Iwai <tiwai@suse.de>

Instead of using the secondary substream, create an individual PCM
stream for HP-independent PCM.  Otherwise it's difficult to handle
different channel numbers with multi-channel stream in the sam PCM
stream structure.
Signed-off-by: Takashi Iwai <tiwai@suse.de>

Unify PCM streams for all codecs by assigning the NID dynamically.
Signed-off-by: Takashi Iwai <tiwai@suse.de>

For VIA codecs, we shouldn't create a substream for independent HP mode,
when no individual HP DAC is found.
Signed-off-by: Takashi Iwai <tiwai@suse.de>

Signed-off-by: Takashi Iwai <tiwai@suse.de>

Parse the output-paths more dynamically, i.e. traverse the paths
from each output pin instead of fixed assignment for each codec.
Now all codecs are using the same output parser code.

The smart51 setup doesn't work with this change, and will be fixed
in the next commits.
Signed-off-by: Takashi Iwai <tiwai@suse.de>

Now storing the analog-mixer widget in spec, we can simplify the rest
parts.
Signed-off-by: Takashi Iwai <tiwai@suse.de>

Muting all line-outs and/or speakers is more common in other drivers,
so we should follow it, too.
Signed-off-by: Takashi Iwai <tiwai@suse.de>

Mute the outputs via pin-controls instead of amps for the auto-mute
handling.  This makes our life easier as it avoids conflict of the states
between the mixer elements and the auto-mute toggles.

With this change, we can use vmaster for the master control easily now.
Signed-off-by: Takashi Iwai <tiwai@suse.de>

This reduces lots of static strings.
Signed-off-by: Takashi Iwai <tiwai@suse.de>