- 11 Aug, 2010 9 commits
-
-
Miklos Szeredi authored
Split off prepend_path() from __d_path(). This new helper takes an end-of-buffer pointer and buffer-length pointer just like the other prepend_* functions. Move the " (deleted)" postfix out to __d_path(). This patch doesn't change any functionality but paves the way for the following patches. Signed-off-by:
Miklos Szeredi <mszeredi@suse.cz> Signed-off-by:
Al Viro <viro@zeniv.linux.org.uk>
-
Miklos Szeredi authored
In the old times pseudo-filesystems set the name of theroot dentry to some prefix like "pipe:" and the name of the child dentry to "[123]" and relied on a hack in __d_path() to replace the preceding slash with the root's name to get "pipe:[123]". Then the d_dname() dentry operation was introduced which solved the same problem without having to pre-fill the name in each dentry. Currently the following pseudo filesystems exist in the kernel: perfmon mtd anon_inode bdev pipe socket Of these only perfmon, anon_inode, pipe and socket create sub-dentries, all of which have now been switched to using d_dname(). bdev and mtd only create inodes. This means that now the hack to overwrite the slash can be removed, so for unreachable paths (e.g. within a detached mount) the path string won't be polluted with garbage. For these cases a subsequent patch will add a prefix, indicating that the path is unreachable. Signed-off-by:
-
Miklos Szeredi authored
Switch ia64/perfmon to using the d_dname() instead of relying on __d_path() to prepend the name of the root dentry to the path. CC: Tony Luck <tony.luck@intel.com> CC: Fenghua Yu <fenghua.yu@intel.com> Signed-off-by:
-
Miklos Szeredi authored
Add three helpers that retrieve a refcounted copy of the root and cwd from the supplied fs_struct. get_fs_root() get_fs_pwd() get_fs_root_and_pwd() Signed-off-by:
-
Miklos Szeredi authored
Dentry references should not be acquired without a corresponding vfsmount ref. Signed-off-by:
David Howells <dhowells@redhat.com> Signed-off-by:
-
Lubomir Rintel authored
This adds byte order autodetection (of PDP-11 and LE filesystems). No attempt is made to detect big-endian filesystems -- were there any? Tested with PDP-11 v7 filesystems and PC-IX maintenance floppy. [akpm@linux-foundation.org: coding-style fixes] [AV: parser.h inclusion was a rudiment of discarded stuff] Signed-off-by:
Lubomir Rintel <lkundrak@v3.sk> Cc: Christoph Hellwig <hch@lst.de> Cc: Al Viro <viro@ZenIV.linux.org.uk> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
-
Lubomir Rintel authored
Newly mkfs-ed filesystems from Seventh Edition have last modification time set to zero, but are otherwise perfectly valid. Also, tighten up other sanity checks to filter out most filesystems with different bytesex than we're using. Cc: Christoph Hellwig <hch@lst.de> Signed-off-by:
-
Lubomir Rintel authored
So that the module gets autoloaded when a v7 filesystem is mounted. Cc: Christoph Hellwig <hch@lst.de> Signed-off-by:
-
Stephen Rothwell authored
Signed-off-by:
Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by:
-
- 10 Aug, 2010 31 commits
-
-
git://decibel.fi.muni.cz/~xslaby/linuxLinus Torvalds authored
* 'writable_limits' of git://decibel.fi.muni.cz/~xslaby/linux: unistd: add __NR_prlimit64 syscall numbers rlimits: implement prlimit64 syscall rlimits: switch more rlimit syscalls to do_prlimit rlimits: redo do_setrlimit to more generic do_prlimit rlimits: add rlimit64 structure rlimits: do security check under task_lock rlimits: allow setrlimit to non-current tasks rlimits: split sys_setrlimit rlimits: selinux, do rlimits changes under task_lock rlimits: make sure ->rlim_max never grows in sys_setrlimit rlimits: add task_struct to update_rlimit_cpu rlimits: security, add task_struct to setrlimit Fix up various system call number conflicts. We not only added fanotify system calls in the meantime, but asm-generic/unistd.h added a wait4 along with a range of reserved per-architecture system calls.
-
git://git.infradead.org/mtd-2.6Linus Torvalds authored
* git://git.infradead.org/mtd-2.6: (79 commits) mtd: Remove obsolete <mtd/compatmac.h> include mtd: Update copyright notices jffs2: Update copyright notices mtd-physmap: add support users can assign the probe type in board files mtd: remove redwood map driver mxc_nand: Add v3 (i.MX51) Support mxc_nand: support 8bit ecc mxc_nand: fix correct_data function mxc_nand: add V1_V2 namespace to registers mxc_nand: factor out a check_int function mxc_nand: make some internally used functions overwriteable mxc_nand: rework get_dev_status mxc_nand: remove 0xe00 offset from registers mtd: denali: Add multi connected NAND support mtd: denali: Remove set_ecc_config function mtd: denali: Remove unuseful code in get_xx_nand_para functions mtd: denali: Remove device_info_tag structure mtd: m25p80: add support for the Winbond W25Q32 SPI flash chip mtd: m25p80: add support for the Intel/Numonyx {16,32,64}0S33B SPI flash chips mtd: m25p80: add support for the EON EN25P{32, 64} SPI flash chips ... Fix up trivial conflicts in drivers/mtd/maps/{Kconfig,redwood.c} due to redwood driver removal.
-
git://git.kernel.org/pub/scm/linux/kernel/git/bcopeland/omfsLinus Torvalds authored
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/bcopeland/omfs: omfs: fix uninitialized variable warning omfs: sanity check cluster size omfs: refuse to mount if bitmap pointer is obviously wrong omfs: check bounds on block numbers before passing to sb_bread omfs: fix memory leak
-
git://git.infradead.org/users/eparis/notifyLinus Torvalds authored
* 'for-linus' of git://git.infradead.org/users/eparis/notify: (132 commits) fanotify: use both marks when possible fsnotify: pass both the vfsmount mark and inode mark fsnotify: walk the inode and vfsmount lists simultaneously fsnotify: rework ignored mark flushing fsnotify: remove global fsnotify groups lists fsnotify: remove group->mask fsnotify: remove the global masks fsnotify: cleanup should_send_event fanotify: use the mark in handler functions audit: use the mark in handler functions dnotify: use the mark in handler functions inotify: use the mark in handler functions fsnotify: send fsnotify_mark to groups in event handling functions fsnotify: Exchange list heads instead of moving elements fsnotify: srcu to protect read side of inode and vfsmount locks fsnotify: use an explicit flag to indicate fsnotify_destroy_mark has been called fsnotify: use _rcu functions for mark list traversal fsnotify: place marks on object in order of group memory address vfs/fsnotify: fsnotify_close can delay the final work in fput fsnotify: store struct file not struct path ... Fix up trivial delete/modify conflict in fs/notify/inotify/inotify.c.
-
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs-2.6Linus Torvalds authored
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs-2.6: (96 commits) no need for list_for_each_entry_safe()/resetting with superblock list Fix sget() race with failing mount vfs: don't hold s_umount over close_bdev_exclusive() call sysv: do not mark superblock dirty on remount sysv: do not mark superblock dirty on mount btrfs: remove junk sb_dirt change BFS: clean up the superblock usage AFFS: wait for sb synchronization when needed AFFS: clean up dirty flag usage cifs: truncate fallout mbcache: fix shrinker function return value mbcache: Remove unused features add f_flags to struct statfs(64) pass a struct path to vfs_statfs update VFS documentation for method changes. All filesystems that need invalidate_inode_buffers() are doing that explicitly convert remaining ->clear_inode() to ->evict_inode() Make ->drop_inode() just return whether inode needs to be dropped fs/inode.c:clear_inode() is gone fs/inode.c:evict() doesn't care about delete vs. non-delete paths now ... Fix up trivial conflicts in fs/nilfs2/super.c
-
git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6Linus Torvalds authored
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6: (59 commits) igbvf.txt: Add igbvf Documentation igb.txt: Add igb documentation e100/e1000*/igb*/ixgb*: Add missing read memory barrier ixgbe: fix build error with FCOE_CONFIG without DCB_CONFIG netxen: protect tx timeout recovery by rtnl lock isdn: gigaset: use after free isdn: gigaset: add missing unlock solos-pci: Fix race condition in tasklet RX handling pkt_sched: Fix sch_sfq vs tcf_bind_filter oops net: disable preemption before call smp_processor_id() tcp: no md5sig option size check bug iwlwifi: fix locking assertions iwlwifi: fix TX tracer isdn: fix information leak net: Fix napi_gro_frags vs netpoll path usbnet: remove noisy and hardly useful printk rtl8180: avoid potential NULL deref in rtl8180_beacon_work ath9k: Remove myself from the MAINTAINERS list libertas: scan before assocation if no BSSID was given libertas: fix association with some APs by using extended rates ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/davem/ide-2.6Linus Torvalds authored
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/ide-2.6: tx493xide: use min_t() macro instead of min() drivers/ide: Use memdup_user via82cxxx: fix typo for VT6415 PCIE PATA IDE Host Controller support. ide-cd: Do not access completed requests in the irq handler
-
git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc-2.6Linus Torvalds authored
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc-2.6: sparc64: Update defconfig. sparc: Kill user copy check code. sparc64: Fix perf_arch_get_caller_regs(). sparc64: Add missing ID to parport probing code.
-
git://www.jni.nu/crisLinus Torvalds authored
* 'rs485fix' of git://www.jni.nu/cris: CRIS: ioctl for getting RS485 information
-
git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpcLinus Torvalds authored
* 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc: powerpc: fix build with make 3.82 Revert "Input: appletouch - fix integer overflow issue" memblock: Fix memblock_is_region_reserved() to return a boolean powerpc: Trim defconfigs powerpc: fix i8042 module build error sound/soc: mpc5200_psc_ac97: Use gpio pins for cold reset powerpc/5200: add mpc5200_psc_ac97_gpio_reset
-
git://git.kernel.org/pub/scm/linux/kernel/git/vapier/blackfinLinus Torvalds authored
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/vapier/blackfin: (32 commits) Blackfin: gpio: add a debounce stub Blackfin: update defconfigs Blackfin: remove CONFIG_MEM_GENERIC_BOARD Blackfin: dpmc: punt unnecessary RTC_ISTAT clearing Blackfin: unify rotary encoder bitmasks Blackfin: unify SDH/RSI bitmasks Blackfin: BF54x: tweak DMAC MMR naming to match other ports Blackfin: TWI: clean up the MMR names Blackfin: add EVT_OVERRIDE/IPRIO core MMR helpers Blackfin: add support for dynamic ftrace Blackfin: add support for LZO compressed kernels Blackfin: portmux: fix peripheral map overflow when requesting pins Blackfin: document SPI CS limitations with CPHA=0 Blackfin: remove useless and outdated documentation Blackfin: BF51x/BF52x: support GPIO Hysteresis/Schmitt Trigger options Blackfin: gpio/portmux: clean up whitespace corruption Blackfin: make sure mmiowb inserts a write barrier with SSYNC Blackfin: fix DMA/cache bug when resuming from suspend to RAM Blackfin: BF51x: fix handling of PH8 (the "internal" SPI0SEL4 pin) Blackfin: add a GPIO_DEFAULT_BOOT_SPI_CS ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/djbw/async_txLinus Torvalds authored
* 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/djbw/async_tx: (30 commits) DMAENGINE: at_hdmac: locking fixlet DMAENGINE: pch_dma: kill another usage of __raw_{read|write}l dma: dmatest: fix potential sign bug ioat2: catch and recover from broken vtd configurations v6 DMAENGINE: add runtime slave control to COH 901 318 v3 DMAENGINE: add runtime slave config to DMA40 v3 DMAENGINE: generic slave channel control v3 dmaengine: Driver for Topcliff PCH DMA controller intel_mid: Add Mrst & Mfld DMA Drivers drivers/dma: Eliminate a NULL pointer dereference dma/timb_dma: compile warning on 32 bit DMAENGINE: ste_dma40: support older silicon DMAENGINE: ste_dma40: support disabling physical channels DMAENGINE: ste_dma40: no disabled phy channels on ux500 DMAENGINE: ste_dma40: fix suspend bug DMAENGINE: ste_dma40: add DB8500 memcpy channels DMAENGINE: ste_dma40: no flow control on memcpy DMAENGINE: ste_dma40: arch updates for LCLA and LCPA DMAENGINE: ste_dma40: allocate LCLA dynamically DMAENGINE: ste_dma40: no premature stop ... Fix up trivial conflicts in arch/arm/mach-ux500/devices-db8500.c
-
qiaochong authored
According include/linux/console_struct.h,vc_scr_end is unsigned long. struct vc_data { unsigned short vc_num; /* Console number */ unsigned int vc_cols; /* [#] Console size */ unsigned int vc_rows; unsigned int vc_size_row; /* Bytes per row */ unsigned int vc_scan_lines; /* # of scan lines */ unsigned long vc_origin; /* [!] Start of real screen */ unsigned long vc_scr_end; /* [!] End of real screen */ unsigned long vc_visible_origin; /* [!] Top of visible window */ unsigned int vc_top, vc_bottom; /* Scrolling region */ const struct consw *vc_sw; unsigned short *vc_screenbuf; ... } Signed-off-by:qiaochong <qiaochong@loongson.cn> Cc: Greg KH <greg@kroah.com> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
qiaochong authored
kernel will die on some platform when switch from vga mode to framebuffer mode. The reason of this bug is that bind_con_driver reset vc->vc_origin to (unsigned long)vc->vc_screenbuf. On vgacon vc->vc_origin is not releated to vc->vc_screenbuf,if set vc->vc_origin to vc->vc_screenbuf,kernel will die on vc_do_resize. static int vc_do_resize(struct tty_struct *tty, struct tty_struct *real_tty, struct vc_data *vc, unsigned int cols, unsigned int lines) { unsigned long old_origin, new_origin, new_scr_end, rlth, rrem, err = 0; unsigned int old_cols, old_rows, old_row_size, old_screen_size; unsigned int new_cols, new_rows, new_row_size, new_screen_size; unsigned int end, user; ... end = (old_rows > new_rows) ? old_origin + (old_row_size * new_rows) : vc->vc_scr_end; ... /* here for a test from vgacon to framebuffer: old_origin=0x810814a0,end=0xb00b8fa0,vc->vc_origin=0x810814a0 the code bellow will copy memory from 0x810814a0 to 0xb00b8fa0, this will cover kernel code,kernel died here. */ while (old_origin < end) { scr_memcpyw((unsigned short *) new_origin, (unsigned short *) old_origin, rlth); if (rrem) scr_memsetw((void *)(new_origin + rlth), vc->vc_video_erase_char, rrem); old_origin += old_row_size; new_origin += new_row_size; } ... } [akpm@linux-foundation.org: coding-style fixes] Signed-off-by: -
Michel Lespinasse authored
More code can be pushed from rwsem_down_read_failed and rwsem_down_write_failed into rwsem_down_failed_common. Following change adding down_read_critical infrastructure support also enjoys having flags available in a register rather than having to fish it out in the struct rwsem_waiter... Signed-off-by:
Michel Lespinasse <walken@google.com> Acked-by:
-
Michel Lespinasse authored
This change addresses the following situation: - Thread A acquires the rwsem for read - Thread B tries to acquire the rwsem for write, notices there is already an active owner for the rwsem. - Thread C tries to acquire the rwsem for read, notices that thread B already tried to acquire it. - Thread C grabs the spinlock and queues itself on the wait queue. - Thread B grabs the spinlock and queues itself behind C. At this point A is the only remaining active owner on the rwsem. In this situation thread B could notice that it was the last active writer on the rwsem, and decide to wake C to let it proceed in parallel with A since they both only want the rwsem for read. Signed-off-by:
-
Michel Lespinasse authored
Previously each waiting thread added a bias of RWSEM_WAITING_BIAS. With this change, the bias is added only once to indicate that the wait list is non-empty. This has a few nice properties which will be used in following changes: - when the spinlock is held and the waiter list is known to be non-empty, count < RWSEM_WAITING_BIAS <=> there is an active writer on that sem - count == RWSEM_WAITING_BIAS <=> there are waiting threads and no active readers/writers on that sem Signed-off-by: -
Michel Lespinasse authored
In __rwsem_do_wake(), we can skip the active count check unless we come there from up_xxxx(). Also when checking the active count, it is not actually necessary to increment it; this allows us to get rid of the read side undo code and simplify the calculation of the final rwsem count adjustment once we've counted the reader threads to wake. The basic observation is the following. When there are waiter threads on a rwsem and the spinlock is held, other threads can only increment the active count by trying to grab the rwsem in down_xxxx(). However down_xxxx() will notice there are waiter threads and take the down_failed path, blocking to acquire the spinlock on the way there. Therefore, a thread observing an active count of zero with waiters queued and the spinlock held, is protected against other threads acquiring the rwsem until it wakes the last waiter or releases the spinlock. Signed-off-by:
-
Michel Lespinasse authored
This is in preparation for later changes in the series. In __rwsem_do_wake(), the first queued waiter is checked first in order to determine whether it's a writer or a reader. The code paths diverge at this point. The code that checks and increments the rwsem active count is duplicated on both sides - the point is that later changes in the series will be able to independently modify both sides. Signed-off-by:
-
Giel van Schijndel authored
Allow device probing to recognise the Fintek F71808E. Sysfs interface: * Fan/pwm control is the same as for F71889FG * Temperature and voltage sensor handling is largely the same as for the F71889FG - Has one temperature sensor less (doesn't have temp3) - Misses one voltage sensor (doesn't have V6, thus in6_input refers to what in7_input refers for F71889FG) For the purpose of the sysfs interface fxxxx_in_temp_attr[] is split up such that it can largely be reused. Signed-off-by:Giel van Schijndel <me@mortis.eu> Cc: Jean Delvare <khali@linux-fr.org> Cc: Hans de Goede <hdegoede@redhat.com> Cc: Jonathan Cameron <jic23@cam.ac.uk> Signed-off-by:
-
Andrew Morton authored
register_hotcpu_notifier() is designed to make these ifdefs unnecessary. Cc: Chen Gong <gong.chen@linux.intel.com> Cc: Rudolf Marek <r.marek@assembler.cz> Cc: Huaxu Wan <huaxu.wan@intel.com> Cc: Jean Delvare <khali@linux-fr.org> Cc: Guenter Roeck <guenter.roeck@ericsson.com> Signed-off-by:
-
Chen Gong authored
Update coretemp supported CPU TjMax lists and some cleanup work. Signed-off-by:
Chen Gong <gong.chen@linux.intel.com> Cc: Rudolf Marek <r.marek@assembler.cz> Cc: Huaxu Wan <huaxu.wan@intel.com> Cc: Jean Delvare <khali@linux-fr.org> Cc: Guenter Roeck <guenter.roeck@ericsson.com> Signed-off-by:
-
Chen Gong authored
If one coretemp device can't be added, it should allow subsequent adding operation because every new-added device will create a new sysfs group, not an additional sensor sys entry. Signed-off-by:
-
Chen Gong authored
Fix two errors in hotplug. One is for hotplug notifier. The other is unnecessary driver unregister. Because even none of online cpus supports coretemp, we can't assume new onlined cpu doesn't support it either. If related driver is unregistered there we have no chance to use coretemp from then on. Signed-off-by:
-
Guenter Roeck authored
[akpm@linux-foundation.org: coding-style fixes] Signed-off-by:
Guenter Roeck <guenter.roeck@ericsson.com> Cc: Jean Delvare <khali@linux-fr.org> Cc: Randy Dunlap <rdunlap@xenotime.net> Cc: Hans de Goede <hdegoede@redhat.com> Cc: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by:
-
Guenter Roeck authored
This driver adds support for the monitoring features of the Summit Microelectronics SMM665 Six-Channel Active DC Output Controller/Monitor. Signed-off-by:
Jonathan Cameron <jic23@cam.ac.uk> Cc: Jean Delvare <khali@linux-fr.org> Cc: Hans de Goede <hdegoede@redhat.com> Cc: Mark Brown <broonie@opensource.wolfsonmicro.com> Cc: Samuel Ortiz <sameo@linux.intel.com> Signed-off-by:
-
Kalhan Trisal authored
This driver will report the heading values in degrees to the sysfs interface. The values returned are headings . e.g. 245.6 Alan: Cleanups requested now all folded in and a sysfs description to keep Andrew happy. The sysfs description now resembles hwmon. Signed-off-by:
Kalhan Trisal <kalhan.trisal@intel.com> Reviewed-by:
Jean Delvare <khali@linux-fr.org> Signed-off-by:
Alan Cox <alan@linux.intel.com> Cc: Jonathan Cameron <jic23@cam.ac.uk> Signed-off-by:
-
Ritesh Raj Sarraf authored
Add Lenovo Thinkpad T400. I have done the testing on my laptop. The hdaps module detects the device and the hdapsd daemon is able to [un]park the disk. Signed-off-by:
Ritesh Raj Sarraf <rrs@debian.org> Cc: Frank Seidel <frank@f-seidel.de> Cc: Dmitry Torokhov <dtor@mail.ru> Cc: Jean Delvare <khali@linux-fr.org> Signed-off-by:
-
Patrick Pannuto authored
These are caused by checkpatch incorrectly parsing its internal representation of a statement block for struct's (or anything else that is a statement block encapsulated in {}'s that also ends with a ';'). Fix this by properly parsing a statement block. An example: +struct dummy_type dummy = { + .foo = "baz", +}; +EXPORT_SYMBOL_GPL(dummy); + +static int dummy_func(void) +{ + return -EDUMMYCODE; +} +EXPORT_SYMBOL_GPL(dummy_func); WARNING: EXPORT_SYMBOL(foo); should immediately \ follow its function/variable #19: FILE: dummy.c:4: +EXPORT_SYMBOL_GPL(dummy); The above warning is issued when it should not be. Signed-off-by:Patrick Pannuto <ppannuto@codeaurora.org> Cc: Andy Whitcroft <apw@shadowen.org> Signed-off-by:
-
Patrick Pannuto authored
As explained in Documentation/timers/timers-howto.txt, msleep's of < 20ms may sleep for as long as 20ms. Caller's of msleep(1) or msleep(2), etc are likely not to expect this quirky behavior - warn them. Signed-off-by:
-
Patrick Pannuto authored
When possible, sleeping is (usually) better than delaying; however, don't bother callers of udelay < 10us, as those cases are generally not worth the switch to usleep [akpm@linux-foundation.org: fix mismatched parentheses] Signed-off-by:
-
