Teach blk_congestion_wait() to return the number of jiffies remaining.  This
is for debug, but it is also nicely consistent.

To check on zone balancing, split the /proc/vmstat:pgsteal, pgreclaim pgalloc
and pgscan stats into per-zone counters.

Additionally, split the pgscan stats into pgscan_direct and pgscan_kswapd to
see who's doing how much scanning.

And add a metric for the number of slab objects which were scanned.

From: Paul Fulghum <paulkf@microgate.com>

* track driver API changes
* remove cast (kernel janitor)

From: Paul Fulghum <paulkf@microgate.com>

* Track driver API changes
* Remove cast (kernel janitor)

From: Paul Fulghum <paulkf@microgate.com>

Patch for synclinkmp.c

* Track driver API changes
* Remove cast (kernel janitor)
* Replace page_free call with kfree (to match kmalloc allocation)

From: Chris Mason <mason@suse.com>

mempool_alloc() and mempool_free() check pool->curr_nr without any locks
held.  This can lead to skipping a wakeup when there are people waiting,
and sleeping when there are free elements in the pool.

I can't trigger this reliably, but sooner or later someone on ppc is
probably going to hit it.

From: Geert Uytterhoeven <geert@linux-m68k.org>

M68k interrupt management: rename routines to not confuse them with
syscalls

- sys_{request,free}_irq() -> cpu_{request,free}_irq()

- q40_sys_default_handler[] -> q40_default_handler

- sys_default_handler() -> default_handler()

From: Geert Uytterhoeven <geert@linux-m68k.org>

Mac IDE: Make sure the core IDE driver doesn't try to request the MMIO
ports a second time, since this will fail.

From: Geert Uytterhoeven <geert@linux-m68k.org>

Apollo fb: Add sysfs support (from James Simmons)

From: Geert Uytterhoeven <geert@linux-m68k.org>

Amiga Framemaster II fb: Add sysfs support (from James Simmons)

From: Geert Uytterhoeven <geert@linux-m68k.org>

Add missing implementation for non-atomic __test_and_set_bit()

From: James Simmons <jsimmons@infradead.org>,
      Kronos <kronos@kronoz.cjb.net>

Various fixes and enhancements to the monitor hardware detection code.  The
only driver that uses it is the radeon driver.

Old EDID parsing code was very verbose, half of the patch address this (ie.
print lots of stuff iff DEBUG).  The other big change is the FB_MODE_IS_*
stuff: we really need a way to know the origin of a video mode.  In this way
we can select video mode that comes from EDID instead of VESA or GTF.

Drivers other than radeonfb won't be affected because they cannot (yet) get
EDID from the monitor and don't use EDID related code.

From: Michel Marti <michel.marti@objectxp.com>

The blkmtd driver oopses in add_device().  The following trivial patch
fixes this.

From: Arjan van de Ven <arjanv@redhat.com>

Readahead of raid0 was suboptimal; it read only 1 stride ahead.  The
problem with this is that while it will keep all spindles busy, it will not
actually manage to make larger IO's, eg each disk would just do the chunk
size IO.  Doing at least 2 chunks is more than appropriate so that each
spindle will get a chance to merge IO's.

(Neil fixed raid6 and raid6 too)

From: Rusty Russell <rusty@rustcorp.com.au>

Someone added __attribute_used__ throughout module.h, but didn't remove the
", unused".  Looks like some arch/gcc combos still consider it unused, and
discard the fn.

From: Geert Uytterhoeven <geert@linux-m68k.org>

Make CONFIG_NVRAM depend on the prerequisites that are explicitly checked
for in drivers/char/nvram.c, or on CONFIG_GENERIC_NVRAM (for PPC).

From: Geert Uytterhoeven <geert@linux-m68k.org>

Add missing include (needed for struct inode)

From: Marc-Christian Petersen <m.c.p@wolk-project.de>

The attached patch is needed to stop showing us "Macintosh device drivers"
for all architectures via menuconfig || xconfig || gconfig.  It's only
necessary for PPC and/or MAC.

ACKed by benh.

From: Arjan van de Ven <arjanv@redhat.com>

Several of the pte_chain_alloc() allocators that use GFP_ATOMIC have a
fallback for failure that sleeps; they thus need to not warn on failure..
Seen during a big fork on a busy system.

From: "Randy.Dunlap" <rddunlap@osdl.org>

cciss_scsi_detect() can be called after init (for TAPE support).

From: Matt Domsch <Matt_Domsch@dell.com>

Patch below from Patrick J. LoPresti and myself.  Patrick describes:

Why this patch?  The problem is that the legacy BIOS interface
(INT13/AH=3D08) for querying the disk geometry returns different values
than the extended INT13 interface which the EDD code currently uses.  This
is because the legacy interface only provides a 10-bit cylinder field, so
modern BIOSes "lie" about the head/sector counts in order to make more of
the disk visible within the first 1024 cylinders.

Many non-Linux applications, including the stock Windows boot loader, DOS
fdisk, etc., rely upon the legacy interface and geometry.  So it is useful
to be able to obtain the legacy values from a running Linux kernel.

What this patch does is to add new entries under
/sys/firmware/edd/int13_devXX named "legacy_cylinders", "legacy_heads", and
"legacy_sectors".  These provide the geometry given by the legacy
INT13/AH=3D08 BIOS interface, just like the current "default_cylinders"
etc.  provide the the geometry given by the INT13/AH=3D48 interface.

Without this patch, I cannot use Linux to partition a drive and install
Windows, which happens to be my application.

 - Pat
   http://unattended.sourceforge.net/

In addition, this adds two buggy BIOS workarounds  in the EDD int13
calls as suggested by Ralf Brown's interrupt list.

I'm also interested in moving this code out of arch/i386/kernel/edd.c and
include/asm-i386/edd.h, as I believe it is applicable on x86-64 as well.
However, there's no good place under drivers/ to put edd.c when it's not
tied to a bus, but to several CPU architectures and their firmwares...
Maybe a new directory drivers/firmware?

sound/oss/wavfront.c: In function `wavefront_download_firmware':
sound/oss/wavfront.c:2524: warning: implicit declaration of function `sys_open'
sound/oss/wavfront.c:2533: warning: implicit declaration of function `sys_read'
sound/oss/wavfront.c:2582: warning: implicit declaration of function `sys_close

From: Chris Mason <mason@suse.com>

This patch fixes a problem we're hitting on ia64 with page sizes > 4k.

When the page size is greater than the block size, and parts of the page
fall past the end of the device, readpage will fail because
blkdev_get_block returns -EIO for blocks past i_size.

The attached patch changes blkdev_get_block to return holes when reading
past the end of the device, which allows us to read that last valid 4k
block and then fill the rest of the page with zeros.  Writes will still
fail with -EIO.

From: vda <vda@port.imtp.ilyichevsk.odessa.ua>

Add a missing test for the "root=/dev/ram" kernel boot option.  It's just an
alias for /dev/ram0, but it worked in 2.4...

From: Srivatsa Vaddagiri <vatsa@in.ibm.com>

current_is_keventd() doesn't need to search across all the CPUs to identify
itself.

From: Andi Kleen <ak@muc.de>

I was debugging some code that corrupted the vma rb lists and for that I
fixed validate_mm to not be recursive and do some more checks.

It's slower now, but that shouldn't be a problem.

Also make it non static to allow easier checks elsewhere.

From: WU Fengguang <wfg@mail.ustc.edu.cn>

- In sys_fadvise64_64(): if the start and/or end offsets do not fall on
  page boundaries, preserve the partial pages.  The thinking here is that it
  is better to preserve needed memory than to not shoot down unneeded memory.

- In invalidate_mapping_pages(): we were invalidating an entire pagevec's
  worth of pages each time around, even if that went beyond the part of the
  file which the caller asked to be invalidated.  Fix that up.

From: Adrian Bunk <bunk@fs.tum.de>

- remove an MELAN entry that was forgotten in the i386 processor
  selection menu

- s/CONFIG_MELAN/CONFIG_X86_ELAN/ was missing in module.h

From: Wim Van Sebroeck <wim@iguana.be>

Convert last set of watchdog drivers to new moduleparam system.

From: Andreas Gruenbacher <agruen@suse.de>

Remove the arbitrary limit of 32 ACL entries on ext[23] when reading from
disk.  This change is backward compatible; we need to have this change in
to be able to also allow writing big ACLs.

The second patch that removes the ACL entry limit for writes is not
included.  I don't want to push that patch now, because large ACLs would
cause 2.4 and current 2.6 kernels to fail.  My plan is to remove the second
limit later, in a half-year or year or so.

From: Andi Kleen <ak@suse.de>

i810fb most likely is needed on x86-64 too because there are Intel chipsets
for it now.  So far it only linked on i386, fix this.

From: Arjan van de Ven <arjanv@redhat.com>

If someone removes a /proc directory which still has subdirectories it will
lead to very nasty things (dentries remaining on hash chains etc etc etc).
The BUG_ON in the patch below will catch this nasty situation.

From: Manfred Spraul <manfred@colorfullife.com>

sem_revalidate checks that a semaphore array didn't disappear while the
code was running without the semaphore array spinlock.  If the array
disappeared, then it will return without holding a lock.  find_undo calls
sem_revalidate and then sem_unlock, even if sem_revalidate failed.  The
sem_unlock call must be removed.

Mingming Cao reported a spinlock deadlock with sysv semaphores.  A
superflous unlock doesn't explain the deadlock, but it's obviously a bug.

From: Sam Ravnborg <sam@ravnborg.org>

From: Daniel Mack <daniel@zonque.org>, me

modpost unconditionally searched for ".o" assuming this is always the
suffix of the module.  This fails in two cases:

a) when building external modules where any directory include ".o" in
   the name.  One example is a directory named: .../cvs.alsa.org/...

b) when someone names a kernel directory so it contains ".o".  One
   example is drivers/scsi/aic.ok/...

case b) was triggered by renaming the directory for aic7xxx, and modifying
Makefile and Kconfig.  This caused make modules to fail.

From: Chris Mason <mason@suse.com>

There's a race in loopback setup, it's easiest to trigger with one or more
procs doing loopback mounts at the same time.  The problem is that
fs/block_dev.c:do_open() only calls bdev_set_size on the first open.
Picture two procs:

proc1: mount -o loop file1 mnt1
proc2: mount -o loop file2 mnt2

proc1                   proc2
open /dev/loop0                         # bd_openers now 1
do_open
 bd_set_size(bdev, 0)                   # loop unbound, so bdev size is 0
                        open /dev/loop0 # bd_openers now 2
loop_set_fd                             # disk capacity now correct, but
				        # bdev not updated
mount /dev/loop0 /mnt
do_open

Because bd_openers != 0 for the last do_open, bd_set_size is not called
again and a size of 0 is used.  This eventually leads to an oops when the
loop device is unmounted, because fsync_bdev calls block_write_full_page
who decides every page on the block device is outside i_size and unmaps
them.

When ext2 or reiserfs try to sync a metadata buffer, we get an oops on
because the buffers are no longer mapped.

The patch below changes loop_set_fd and loop_clr_fd to also manipulate the
size of the block device, which fixes things for me.

From: Arjan van de Ven <arjanv@redhat.com>

The patch below (written by Al Viro) solves a nasty chicken-and-egg issue
for operating system installers (well at least anaconda but the problem
domain is not exclusive to that)

The basic problem is this:

- The small first stage installer locates the image file of the second
  stage installer (which has X and all the graphical stuff); this image can
  be on the same CD, but it can come via NFS, http or ftp or ...  as well.

- The first stage installer loop-back mounts this image and gives control
  to the second stage installer by calling some binary there.

- The graphical installer then asks the user all those questions and
  starts installing packages.  Again the packages can come from the CD but
  also from NFS or http or ...

Now in case of a CD install, once all requested packages from the first CD
are installed, the installer wants to unmount and eject the CD and prompt
the user to put CD 2 in.......  EXCEPT that the unmount can't work since
the installer is actually running from a loopback mount of this cd.

The solution is a "LOOP_CHANGE_FD" ioctl, where basically the installer
copies the image to the harddisk (which can only be done late since only
late the target harddisk is mkfs'd) and then magically switches the backing
store FD from underneath the loop device to the one on the target harddisk
(and thus unbusying the CD mount).

This is obviously only allowed if the size of the new image is identical
and if the loop image is read-only in the first place.  It's the
responsibility of root to make sure the contents is the same (but that's of
the give-root-enough-rope kind)

From: Sam Ravnborg <sam@ravnborg.org>

Make the difference between 'make clean' and 'make distclean/mrproper' more
explicit.

make clean now removes all generated files except .config* and .version.
The result is much easier to understand now.

make clean deletes all generated files (except .config* and .version).
make mrproper deletes configuration and all temporary files left by patch,
editors and the like.

Example output:
> make mrproper
  CLEAN   init
  CLEAN   usr
  CLEAN   scripts/kconfig
  CLEAN   scripts
  CLEAN   .tmp_versions include/config
  CLEAN   include/asm-i386/asm_offsets.h include/linux/autoconf.h include/linux/version.h include/asm .tmp_versions
  CLEAN   .version .config

Form the list of files/directories deleted during make clean, removed all
references that is no longer relevant for the current kernel.

From: William Lee Irwin III <wli@holomorphy.com>

Using PAGE_SIZE rather than 4096 so that mmap() granularity is honored by
whatever non-i386 architectures use MMAP_PAGE_ZERO.

From: Ville Nuorvala <vnuorval@tcs.hut.fi>

There are a few kernel-only things in compiler.h which should have been
placed inside __KERNEL__.

From: "Chen, Kenneth W" <kenneth.w.chen@intel.com>

The only path to get to del_timer call in __generic_unplug_device() is when
blk_remove_plug() returns 1, and in that case it already removed the
unplug_timer.

Patch to remove this redundant call.