This converts the gemini machine to use generic clockevents
by rewriting the timer driver.

Cc: arm@kernel.org
Cc: Hans Ulli Kroll <ulli.kroll@googlemail.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Olof Johansson <olof@lixom.net>

Merge tag 'omap-for-v3.13/cm-scm-cleanup-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into next/cleanup

From Paul Walmsley <paul@pwsan.com> via Tony Lindgren:

Move some of the OMAP2+ CM and System Control Module direct
register accesses into CM- and System Control
Module-specific "drivers" underneath arch/arm/mach-omap2/.  This
is a prerequisite for moving this code out of arch/arm/mach-omap2/ into
drivers/.

Basic test logs are available here:

http://www.pwsan.com/omap/testlogs/cm_scm_cleanup_a_v3.13/20131019101809/

* tag 'omap-for-v3.13/cm-scm-cleanup-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
  ARM: OMAP3: control: add API for setting IVA bootmode
  ARM: OMAP3: CM/control: move CM scratchpad save to CM driver
  ARM: OMAP3: McBSP: do not access CM register directly
  ARM: OMAP3: clock: add API to enable/disable autoidle for a single clock
  ARM: OMAP2: CM/PM: remove direct register accesses outside CM code
  + Linux 3.12-rc4
Signed-off-by: Olof Johansson <olof@lixom.net>

Merge tag 'samsung-maintainer' of git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung into next/cleanup

From Kukjin Kim, an update to the Samsung maintainer entries.

* tag 'samsung-maintainer' of git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung:
  MAINTAINERS: Add DTS files to patterns for Samsung platform
Signed-off-by: Olof Johansson <olof@lixom.net>

Merge tag 'samsung-cleanup' of git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung into next/cleanup

From Kukjin Kim:
Samsung Cleanup for v3.13
- remove unnecessary config options and header inclusions
- use CONFIG_ARCH_S3C64XX instead of PLAT_S3C64XX

* tag 'samsung-cleanup' of git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung:
  ARM: EXYNOS: remove CONFIG_MACH_EXYNOS[4, 5]_DT config options
  ARM: EXYNOS: remove unnecessary header inclusions from exynos4/5 dt machine file
  ARM: S3C64XX: Kill CONFIG_PLAT_S3C64XX
  ASoC: samsung: Use CONFIG_ARCH_S3C64XX to check for S3C64XX support
  s3c-camif: Use CONFIG_ARCH_S3C64XX to check for S3C64XX support
  gpio: samsung: Use CONFIG_ARCH_S3C64XX to check for S3C64XX support
  ARM: S3C64XX: Move if ARCH_S3C64XX statement into mach-s3c64xx
Signed-off-by: Olof Johansson <olof@lixom.net>

EXYNOS is now Device Tree (DT) only platform so it makes no sense to have
config options responsible for enabling platform specific DT support.

Moreover the kernel image won't even link if neither CONFIG_MACH_EXYNOS4_DT
nor CONFIG_MACH_EXYNOS5_DT config option is enabled (linker fails with "no
machine record defined" error).

Remove CONFIG_MACH_EXYNOS[4,5]_DT config options and just use the standard
CONFIG_ARCH_EXYNOS[4,5] ones instead.
Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Acked-by: Tomasz Figa <t.figa@samsung.com>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>

Merge tag 'for-v3.13/cm-scm-cleanup-a' of git://git.kernel.org/pub/scm/linux/kernel/git/pjw/omap-pending into omap-for-v3.13/cm-scm-cleanup

Move some of the OMAP2+ CM and System Control Module direct
register accesses into CM- and System Control
Module-specific "drivers" underneath arch/arm/mach-omap2/.  This
is a prerequisite for moving this code out of arch/arm/mach-omap2/ into
drivers/.

Basic test logs are available here:

http://www.pwsan.com/omap/testlogs/cm_scm_cleanup_a_v3.13/20131019101809/

OMAP3 PM core requires IVA2 bootmode to be set to idle during init. Currently,
a direct register write is used for this. Add a new ctrl API for this purpose
instead.
Signed-off-by: Tero Kristo <t-kristo@ti.com>
Signed-off-by: Paul Walmsley <paul@pwsan.com>

OMAP3 PM code for off-mode currently saves the scratchpad contents for CM
registers within OMAP control module driver. However, as we are separating
CM code into its own driver, this must be moved also. This patch adds a
new API for saving the CM scratchpad contents and uses this from the high
level scratchpad save function.
Signed-off-by: Tero Kristo <t-kristo@ti.com>
Signed-off-by: Paul Walmsley <paul@pwsan.com>

McBSP driver require special hacks to enable/disable the autoidle feature
for its interface clock for the proper function of the sidetone hardware.
Currently the driver just writes CM registers directly, which should be
avoided. Thus, changed the driver to use the new deny/allow_autoidle
clock API calls.
Signed-off-by: Tero Kristo <t-kristo@ti.com>
Cc: Peter Ujfalusi <peter.ujfalusi@ti.com>
Signed-off-by: Paul Walmsley <paul@pwsan.com>

Some drivers require direct access to the autoidle functionality of the
interface clocks. Added clock APIs for these, so that the drivers do not
need to access CM registers directly.
Signed-off-by: Tero Kristo <t-kristo@ti.com>
Signed-off-by: Paul Walmsley <paul@pwsan.com>

Users of the CM funtionality should not access the CM registers directly
by themselves. Thus, added new CM driver APIs for the OMAP2 specific
functionalities which support the existing direct register accesses, and
changed the platform code to use these. This is done in preparation
for moving the CM code into its own individual driver.
Signed-off-by: Tero Kristo <t-kristo@ti.com>
Signed-off-by: Paul Walmsley <paul@pwsan.com>

From Nicolas Ferre:
First cleanup series for 3.13
- a little non-urgent fix
- addition of DT files to MAINTAINERS
- more important, the splitting of .dtsi files
  that allows to precisely choose the peripherals
  that are present for a particular SoC.
  It is useful for upcoming move to common cloks.

* tag 'at91-cleanup' of git://github.com/at91linux/linux-at91:
  MAINTAINERS: Add patterns for DTS files for AT91
  ARM: at91: remove init_machine() as default is suitable
  ARM: at91/dt: split sama5d3 peripheral definitions
  ARM: at91/dt: split sam9x5 peripheral definitions
  ARM: at91: cam60: fix incorrect placement of __initdata tag

Merge tag 'tegra-for-3.13-cleanup' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into next/cleanup

ARM: tegra: cleanup for 3.13

This branch mainly removes dead code and defines that were useful only
when booting using board files. A few other misc cleanups are also
included.

This branch is based on previous pull request
tegra-for-3.13-deps-for-arm-init-time-cleanup.

* tag 'tegra-for-3.13-cleanup' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux:
  ARM: tegra: fix ARCH_TEGRA_114_SOC select sort order
  ARM: tegra: make tegra_init_fuse() __init
  ARM: tegra: remove much of iomap.h
  ARM: tegra: move resume vector define to irammap.h
  ARM: tegra: delete gpio-names.h
  ARM: tegra: delete stale header content
  ARM: tegra: remove common.c
Signed-off-by: Kevin Hilman <khilman@linaro.org>

Merge tag 'msm-cleanup-for-3.13' of git://git.kernel.org/pub/scm/linux/kernel/git/davidb/linux-msm into next/cleanup

From David Brown:
General cleanups for MSM for 3.13

Some small cleanups for MSM.  Removes extraneous irq definitions that
aren't used on DT targets, moves the single existing board file to
board-dt.c in antipication of additional targets, and renames the
existing DT files to have a common 'qcom' prefix.

* tag 'msm-cleanup-for-3.13' of git://git.kernel.org/pub/scm/linux/kernel/git/davidb/linux-msm:
  ARM: msm: Rename msm devicetrees to have standard 'qcom' prefix
  ARM: msm: Create a common board-dt and config ARCH_MSM_DT
  ARM: msm: Remove irqs-*.h files for DT based targets
Signed-off-by: Kevin Hilman <khilman@linaro.org>

Help ensure updates to the DTS files for AT91 machines and devices get
sent to the maintainers by adding patterns to the MAINTAINERS entry for
the architecture.
Signed-off-by: Mark Brown <broonie@linaro.org>
[nicolas.ferre@atmel.com: add "sama*.dts/dtsi" strings to the list]
Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>

Since 883a106b (ARM: default
machine descriptor for multiplatform) we can remove the SoC-specific
callback init_machine() to use the default code.
This cleans up the code and reduces the number of lines.
Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Acked-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>

This patch splits the sama5d3 SoCs definition:
- a common base for all sama5d3 SoCs (sama5d3.dtsi)
- several optional peripheral definitions which will be included by sama5d3
  specific SoCs (sama5d3_'periph name'.dtsi)
- sama5d3 specific SoC definitions (sama5d3x.dtsi)

This provides a better representation of the real hardware (drop unneed
dt nodes) and avoids peripheral id conflict (which is not the case for
current sama5d3 SoCs, but could be if other SoCs of this family are
released).
Signed-off-by: Boris BREZILLON <b.brezillon@overkiz.com>
[nicolas.ferre@atmel.com: add more "sama5d3?" compatibility strings]
Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>

This patch splits the sam9x5 peripheral definitions into:
- a common base for all sam9x5 SoCs (at91sam9x5.dtsi)
- several optional peripheral definitions which will be included by specific
  sam9x5 SoCs (at91sam9x5_'periph name'.dtsi)

This provides a better representation of the real hardware (drop unneeded
dt nodes) and avoids future peripheral id conflict (lcdc and isi both use
peripheral id 25).
Signed-off-by: Boris BREZILLON <b.brezillon@overkiz.com>
Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>

This header file is no longer needed now that the ARM sched_clock
framework is generic and all users have moved to linux/sched_clock.h
instead of asm/sched_clock.h. Remove it.
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
Signed-off-by: Kevin Hilman <khilman@linaro.org>

The sched_clock.h include is under include/linux now.

Cc: Alexander Shiyan <shc_work@mail.ru>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
Signed-off-by: Kevin Hilman <khilman@linaro.org>

Merge tag 'renesas-cleanup2-for-v3.13' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas into next/cleanup

From Simon Horman:
Second round of Renesas ARM based SoC cleanups for v3.13

* Constify platform data and resources in lager board code
* Clean up registration of VIN and sh_eth in r8a7778 SoC and
   bockw board code
* Make r8a7778_register_hspi() static in r8a7778 SoC code

* tag 'renesas-cleanup2-for-v3.13' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas:
  ARM: shmobile: lager: Constify platform data and resources
  ARM: shmobile: r8a7778: r8a7778_register_hspi() become static
  ARM: shmobile: r8a7778: cleanup registration of sh_eth
  ARM: shmobile: r8a7778: cleanup registration of vin
Signed-off-by: Kevin Hilman <khilman@linaro.org>

Conflicts:
	arch/arm/mach-shmobile/board-lager.c

Help ensure that updates to the Samsung device trees get sent to the
Samsung maintainers for review by adding file patterns to MAINTAINERS.
Signed-off-by: Mark Brown <broonie@linaro.org>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>

mach-exynos{4,5}-dt.c include several header files that are not
really used.
Signed-off-by: Jingoo Han <jg1.han@samsung.com>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>

All the other select statements are alphabetically sorted. Fix the one
remaining escape.
Signed-off-by: Stephen Warren <swarren@nvidia.com>

nomadik_src_init references __initconst sections but lacks an __init
itself. Add __init to fix the section mismatch.
Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
Signed-off-by: Olof Johansson <olof@lixom.net>

Merge tag 'renesas-cleanup-for-v3.13' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas into next/cleanup

From Simon Horman:
Renesas ARM based SoC cleanups for v3.13

* Constify platform data and resources of r8a7790 SoC
* Rename to r8a7790_init_delay() as r8a7790_init_early()
  - This is in preparation for doing more than just initialising the delay
* Rename r8a73a4_init_delay() as r8a73a4_init_early()
  - This is in preparation for doing more than just initialising the delay

* tag 'renesas-cleanup-for-v3.13' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas:
  ARM: shmobile: r8a7790: Constify platform data and resources
  ARM: shmobile: Rename to r8a7790_init_early()
  ARM: shmobile: Rename to r8a73a4_init_early()
Signed-off-by: Olof Johansson <olof@lixom.net>

Merge tag 'renesas-fixes5-for-v3.12' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas into next/cleanup

From Simon Horman:

* Correct incorrect placement of __initdata tag in ape6evm board code

* tag 'renesas-fixes5-for-v3.12' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas:
  ARM: shmobile: ape6evm: fix incorrect placement of __initdata tag
  (+ other patches already present in v3.12-rc4)
Signed-off-by: Olof Johansson <olof@lixom.net>

CLKDEV_LOOKUP selects HAVE_CLK and COMMON_CLK selects CLKDEV_LOOKUP. So
all symbols that select at least two of these symbols can be simplified.

For imx, omap2 and ux500 some rearrangements were necessary before the
simplification.
Acked-by: Tony Lindgren <tony@atomide.com>
Acked-by: Stephen Boyd <sboyd@codeaurora.org>
Acked-by: Dinh Nguyen <dinguyen@altera.com>
Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Acked-by: Pawel Moll <pawel.moll@arm.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Olof Johansson <olof@lixom.net>

From Sebastian Hasselbarth:

This is a patch set based on an RFC [1][2] sent earlier to provide
a common arch/arm init for DT clock providers. Currently, the call to
of_clk_init(NULL) to initialize DT clock providers is spread among several
mach-dirs. Since most machs require DT clocks initialized before timers,
no initcall can be used.

By adding of_clk_init(NULL) to arch/arm time_init(), we can remove all
mach-specific .init_time hooks that basically called of_clk_init and
clocksource_of_init.

In contrast to the RFC version, of_clk_init(NULL) is now only called if
no custom .init_time callback is set. This allows some machs to still
call clock init themselves, as not all can be converted now. Therefore,
this patch sets drops conversion of mach-mvebu and mach-zynq. New machs
that were introduced with v3.12-rc1 are also converted, except mach-u300
that requires clocks before irqs.

* 'clk-of-init-v2_for-3.13' of https://github.com/shesselba/linux-dove: (29 commits)
  ARM: vt8500: remove custom .init_time hook
  ARM: vexpress: remove custom .init_time hook
  ARM: tegra: remove custom .init_time hook
  ARM: sunxi: remove custom .init_time hook
  ARM: sti: remove custom .init_time hook
  ARM: socfpga: remove custom .init_time hook
  ARM: rockchip: remove custom .init_time hook
  ARM: prima2: remove custom .init_time hook
  ARM: nspire: remove custom .init_time hook
  ARM: nomadik: remove custom .init_time hook
  ARM: mxs: remove custom .init_time hook
  ARM: kirkwood: remove custom .init_time hook
  ARM: imx: remove custom .init_time hook
  ARM: highbank: remove custom .init_time hook
  ARM: exynos: remove custom .init_time hook
  ARM: dove: remove custom .init_time hook
  ARM: bcm2835: remove custom .init_time hook
  ARM: bcm: provide common arch init for DT clocks
  ARM: call of_clk_init from default time_init handler
  ARM: vt8500: prepare for arch-wide .init_time callback
  ...
Signed-off-by: Olof Johansson <olof@lixom.net>

Modify the code to use current_euid(), and in_egroup_p, as in done
in fs/proc/proc_sysctl.c:test_perm()

Cc: stable@vger.kernel.org
Reviewed-by: Eric Sandeen <sandeen@redhat.com>
Reported-by: Eric Sandeen <sandeen@redhat.com>
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Pull SCSI target fixes from Nicholas Bellinger:
 "Here are the outstanding target fixes queued up for v3.12-rc4 code.

  The highlights include:

   - Make vhost/scsi tag percpu_ida_alloc() use GFP_ATOMIC
   - Allow sess_cmd_map allocation failure fallback to use vzalloc
   - Fix COMPARE_AND_WRITE se_cmd->data_length bug with FILEIO backends
   - Fixes for COMPARE_AND_WRITE callback recursive failure OOPs + non
     zero scsi_status bug
   - Make iscsi-target do acknowledgement tag release from RX context
   - Setup iscsi-target with extra (cmdsn_depth / 2) percpu_ida tags

  Also included is a iscsi-target patch CC'ed for v3.10+ that avoids
  legacy wait_for_task=true release during fast-past StatSN
  acknowledgement, and two other SRP target related patches that address
  long-standing issues that are CC'ed for v3.3+.

  Extra thanks to Thomas Glanzmann for his testing feedback with
  COMPARE_AND_WRITE + EXTENDED_COPY VAAI logic"

* git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pending:
  iscsi-target; Allow an extra tag_num / 2 number of percpu_ida tags
  iscsi-target: Perform release of acknowledged tags from RX context
  iscsi-target: Only perform wait_for_tasks when performing shutdown
  target: Fail on non zero scsi_status in compare_and_write_callback
  target: Fix recursive COMPARE_AND_WRITE callback failure
  target: Reset data_length for COMPARE_AND_WRITE to NoLB * block_size
  ib_srpt: always set response for task management
  target: Fall back to vzalloc upon ->sess_cmd_map kzalloc failure
  vhost/scsi: Use GFP_ATOMIC with percpu_ida_alloc for obtaining tag
  ib_srpt: Destroy cm_id before destroying QP.
  target: Fix xop->dbl assignment in target_xcopy_parse_segdesc_02

Pull slave-dmaengine fixes from Vinod Koul:
 "Here is the slave dmanegine fixes.  We have the fix for deadlock issue
  on imx-dma by Michael and Josh's edma config fix along with author
  change"

* 'fixes' of git://git.infradead.org/users/vkoul/slave-dma:
  dmaengine: imx-dma: fix callback path in tasklet
  dmaengine: imx-dma: fix lockdep issue between irqhandler and tasklet
  dmaengine: imx-dma: fix slow path issue in prep_dma_cyclic
  dma/Kconfig: Make TI_EDMA select TI_PRIV_EDMA
  edma: Update author email address

CONFIG_PLAT_S3C64XX has been kept in place way too long since it was
marked as temporary in commit

110d85ac ARM: S3C64XX: Eliminate plat-s3c64xx

After fixing all users of it in previous patches, this patch finally
kills this temporary Kconfig entry.
Signed-off-by: Tomasz Figa <tomasz.figa@gmail.com>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>

Since CONFIG_PLAT_S3C64XX is going to be removed, this patch modifies
the s3c-i2s-v2 driver to use the proper way of checking for S3C64xx
support - CONFIG_ARCH_S3C64XX.
Signed-off-by: Tomasz Figa <tomasz.figa@gmail.com>
Acked-by: Mark Brown <broonie@linaro.org>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>

Since CONFIG_PLAT_S3C64XX is going to be removed, this patch modifies
the Kconfig entry of s3c-camif driver to use the proper way of checking
for S3C64xx support - CONFIG_ARCH_S3C64XX.
Signed-off-by: Tomasz Figa <tomasz.figa@gmail.com>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>

Since CONFIG_PLAT_S3C64XX is going to be removed, this patch modifies
the gpio-samsung driver to use the proper way of checking for S3C64xx
support - CONFIG_ARCH_S3C64XX.
Signed-off-by: Tomasz Figa <tomasz.figa@gmail.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>

All other platforms have this condition checked inside their own Kconfig
files, so for consistency this patch makes it this way for mach-s3c64xx
as well.
Signed-off-by: Tomasz Figa <tomasz.figa@gmail.com>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>

Pull btrfs fixes from Chris Mason:
 "This is a small collection of fixes, including a regression fix from
  Liu Bo that solves rare crashes with compression on.

  I've merged my for-linus up to 3.12-rc3 because the top commit is only
  meant for 3.12.  The rest of the fixes are also available in my master
  branch on top of my last 3.11 based pull"

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs:
  btrfs: Fix crash due to not allocating integrity data for a bioset
  Btrfs: fix a use-after-free bug in btrfs_dev_replace_finishing
  Btrfs: eliminate races in worker stopping code
  Btrfs: fix crash of compressed writes
  Btrfs: fix transid verify errors when recovering log tree

Pull GPIO fixes from Linus Walleij:
 "Two patches for the OMAP driver, dealing with setting up IRQs properly
  on the device tree boot path"

* tag 'gpio-v3.12-2' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio:
  gpio/omap: auto-setup a GPIO when used as an IRQ
  gpio/omap: maintain GPIO and IRQ usage separately