- 27 Aug, 2019 11 commits
-
-
Christophe Leroy authored
Create ioremap_32.c and ioremap_64.c and move respective ioremap functions out of pgtable_32.c and pgtable_64.c In the meantime, fix a few comments and changes a printk() to pr_warn(). Also fix a few oversplitted lines. Signed-off-by:
Christophe Leroy <christophe.leroy@c-s.fr> Signed-off-by:
Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/b5c8b02ccefd4ede64c61b53cf64fb5dacb35740.1566309263.git.christophe.leroy@c-s.fr
-
Christophe Leroy authored
Drop multiple definitions of ioremap_bot and make one common to all subarches. Only CONFIG_PPC_BOOK3E_64 had a global static init value for ioremap_bot. Now ioremap_bot is set in early_init_mmu_global(). Signed-off-by:
-
Christophe Leroy authored
Both ioremap_prot() are idenfical, move them into ioremap.c Signed-off-by:
-
Christophe Leroy authored
ioremap(), ioremap_wc() and ioremap_coherent() are now identical on PPC32 and PPC64 as iowa_is_active() will always return false on PPC32. Move them into a new common location called ioremap.c Signed-off-by:
-
Christophe Leroy authored
ppc_md.ioremap() is only used for I/O workaround on CELL platform, so indirect function call can be avoided. This patch reworks the io-workaround and ioremap() functions to use the global 'io_workaround_inited' flag for the activation of io-workaround. When CONFIG_PPC_IO_WORKAROUNDS or CONFIG_PPC_INDIRECT_MMIO are not selected, the I/O workaround ioremap() voids and the global flag is not used. Signed-off-by:
Christoph Hellwig <hch@lst.de> Signed-off-by:
-
Christophe Leroy authored
__ioremap() is not used anymore, drop it. Suggested-by:
-
Christophe Leroy authored
ppc_md.iounmap() is never set, drop it. Once ppc_md.iounmap() is gone, iounmap() remains the only user of __iounmap() and iounmap() does nothing else than calling __iounmap(). So drop iounmap() and make __iounmap() the new iounmap(). Reviewed-by:
-
Christophe Leroy authored
__ioremap() is similar to ioremap_prot() except that ioremap_prot() does a few sanity changes in addition. The flags used by PS3 are not impacted by those changes so for PS3 both functions are equivalent. At the same time, drop parts of the comment that have been invalid since commit e58e87ad ("powerpc/mm: Update _PAGE_KERNEL_RO") Suggested-by:
-
Christoph Hellwig authored
The on chip memory allocator is entirely unused in the kernel tree. Signed-off-by:
-
Christophe Leroy authored
Book3E doesn't have SPRN_SPURR/SPRN_PURR. Activating ARCH_HAS_SCALED_CPUTIME is just wasting CPU time. Signed-off-by:
-
Christopher M. Riedl authored
Add support for disabling the kernel implemented spectre v2 mitigation (count cache flush on context switch) via the nospectre_v2 and mitigations=off cmdline options. Suggested-by:
Christopher M. Riedl <cmr@informatik.wtf> Reviewed-by:
Andrew Donnellan <ajd@linux.ibm.com> Signed-off-by:
-
- 26 Aug, 2019 2 commits
-
-
Gustavo Romero authored
TM test tm-unavailable must take into account aborts due to host aborting a transactin because of a facility unavailable exception, just like it already does for aborts on reschedules (TM_CAUSE_KVM_RESCHED). Reported-by:
Desnes A. Nunes do Rosario <desnesn@linux.ibm.com> Tested-by:
Gustavo Romero <gromero@linux.vnet.ibm.com> Signed-off-by:
-
Gustavo Romero authored
Currently TM signal context tests for GPR, FPR, VMX, and VSX registers print wrong register numbers (wrongly starting from register 0 instead of the first register in the non-volatile subset). Besides it the output when a mismatch happens is poor giving not much information about which context and which register mismatches, because it prints both contexts at the same time and not a comparison between the value that mismatches and the value expected and, moreover, it stops printing on the first mismatch, but it's important to know if there are other mismatches happening beyond the first one. For instance, this is the current output when a mismatch happens: test: tm_signal_context_chk_gpr tags: git_version:v5.2-8249-g02e970fae465-dirty Failed on 0 GPR 1 or 18446744073709551615 failure: tm_signal_context_chk_gpr test: tm_signal_context_chk_fpu tags: git_version:v5.2-8248-g09c289e3ef80 Failed on 0 FP -1 or -1 failure: tm_signal_context_chk_fpu test: tm_signal_context_chk_vmx tags: git_version:v5.2-8248-g09c289e3ef80 Failed on 0 vmx 0xfffffffffffffffefffffffdfffffffc vs 0xfffffffffffffffefffffffdfffffffc failure: tm_signal_context_chk_vmx test: tm_signal_context_chk_vsx tags: git_version:v5.2-8248-g09c289e3ef80 Failed on 0 vsx 0xfffffffffefffffffdfffffffcffffff vs 0xfffffffffefffffffdfffffffcffffff failure: tm_signal_context_chk_vsx This commit fixes the register numbers printed and enhances the error output by providing a full list of mismatching registers separated by the context (non-speculative or speculative context), for example: test: tm_signal_context_chk_gpr tags: git_version:v5.2-8249-g02e970fae465-dirty GPR14 (1st context) == 1 instead of -1 (expected) GPR15 (1st context) == 2 instead of -2 (expected) GPR14 (2nd context) == 0 instead of 18446744073709551615 (expected) GPR15 (2nd context) == 0 instead of 18446744073709551614 (expected) failure: tm_signal_context_chk_gpr test: tm_signal_context_chk_fpu tags: git_version:v5.2-8249-g02e970fae465-dirty FPR14 (1st context) == -1 instead of 1 (expected) FPR15 (1st context) == -2 instead of 2 (expected) failure: tm_signal_context_chk_fpu test: tm_signal_context_chk_vmx tags: git_version:v5.2-8249-g02e970fae465-dirty VMX20 (1st context) == 0xfffffffffffffffefffffffdfffffffc instead of 0x00000001000000020000000300000004 (expected) VMX21 (1st context) == 0xfffffffbfffffffafffffff9fffffff8 instead of 0x00000005000000060000000700000008 (expected) failure: tm_signal_context_chk_vmx test: tm_signal_context_chk_vsx tags: git_version:v5.2-8249-g02e970fae465-dirty VSX20 (1st context) == 0xfffffffffefffffffdfffffffcffffff instead of 0x00000001000000020000000300000004 (expected) VSX21 (1st context) == 0xfbfffffffafffffff9fffffff8ffffff instead of 0x00000005000000060000000700000008 (expected) failure: tm_signal_context_chk_vsx Finally, this commit adds comments to the tests in the hope that it will help people not so familiar with TM understand the tests. Signed-off-by:
Gustavo Romero <gromero@linux.ibm.com> Signed-off-by:
-
- 22 Aug, 2019 16 commits
-
-
Daniel Axtens authored
While reviewing lockdown patches, I discovered that we still enable /dev/port (CONFIG_DEVPORT) in skiroot. /dev/port is used for old x86 style IO accesses. It's set up in drivers/char/mem.c, and is only created if arch_has_dev_port() returns true. Per arch/powerpc/include/asm/io.h, on PPC64 with PCI, this is only true if there's a legacy ISA bridge. Even if a system has a legacy ISA bridge installed, we have no business accessing it in skiroot. Deselect CONFIG_DEVPORT for skiroot. Signed-off-by:
Daniel Axtens <dja@axtens.net> [mpe: Incorporate emailed comments into the change log] Signed-off-by:
-
Gustavo Romero authored
Currently some binary files which are generated when tests are compiled are not ignored by git, so 'git status' catch them. For copyloops test, fix wrong binary names already in .gitignore. For ptrace, security, and stringloops tests add missing binary names to the .gitignore file. Signed-off-by:
-
Gustavo Romero authored
Document all options currently supported by xmon debugger. Signed-off-by:
-
Sam Bobroff authored
Simplify some needlessly complicated boolean logic in eeh_add_to_parent_pe(). Signed-off-by:
Sam Bobroff <sbobroff@linux.ibm.com> Signed-off-by:
-
Sam Bobroff authored
There are no users of the early-out return value from eeh_pe_dev_traverse(), so remove it. Signed-off-by:
-
Sam Bobroff authored
If a PCI device is removed during eeh_pe_report_edev(), between the calls to device_lock() and device_unlock(), edev->pdev will change and cause a crash as the wrong mutex is released. To correct this, hold the PCI rescan/remove lock while taking a copy of edev->pdev and performing a get_device() on it. Use this value to release the mutex, but also pass it through to the device driver's EEH handlers so that they always see the same device. Signed-off-by:
-
Sam Bobroff authored
Convert existing messages, where appropriate, to use the eeh_edev_* logging macros. The only effect should be minor adjustments to the log messages, apart from: - A new message in pseries_eeh_probe() "Probing device" to match the powernv case. - The "Probing device" message in pnv_eeh_probe() is now generated slightly later, which will mean that it is no longer emitted for devices that aren't probed due to the initial checks. Signed-off-by:
-
Sam Bobroff authored
Now that struct eeh_dev includes the BDFN of it's PCI device, make use of it to replace eeh_edev_info() with a set of dev_dbg()-style macros that only need a struct edev. With the BDFN available without the struct pci_dev, eeh_pci_name() is now unnecessary, so remove it. While only the "info" level function is used here, the others will be used in followup work. Signed-off-by:
-
Oliver O'Halloran authored
Preparation for removing pci_dn from the powernv EEH code. The only thing we really use pci_dn for is to get the bdfn of the device for config space accesses, so adding that information to eeh_dev reduces the need to carry around the pci_dn. Signed-off-by:
Oliver O'Halloran <oohall@gmail.com> [SB: Re-wrapped commit message, fixed whitespace damage.] Signed-off-by:
-
Sam Bobroff authored
Now that EEH support for all devices (on PowerNV and pSeries) is provided by the pcibios bus add device hooks, eeh_probe_devices() and eeh_addr_cache_build() are redundant and can be removed. Move the EEH enabled message into it's own function so that it can be called from multiple places. Note that previously on pSeries, useless EEH sysfs files were created for some devices that did not have EEH support and this change prevents them from being created. Signed-off-by:
-
Sam Bobroff authored
On PowerNV and pSeries, devices currently acquire EEH support from several different places: Boot-time devices from eeh_probe_devices() and eeh_addr_cache_build(), Virtual Function devices from the pcibios bus add device hooks and hot plugged devices from pci_hp_add_devices() (with other platforms using other methods as well). Unfortunately, pSeries machines currently discover hot plugged devices using pci_rescan_bus(), not pci_hp_add_devices(), and so those devices do not receive EEH support. Rather than adding another case for pci_rescan_bus(), this change widens the scope of the pcibios bus add device hooks so that they can handle all devices. As a side effect this also supports devices discovered after manually rescanning via /sys/bus/pci/rescan. Note that on PowerNV, this change allows the EEH subsystem to become enabled after boot as long as it has not been forced off, which was not previously possible (it was already possible on pSeries). Signed-off-by:
-
Sam Bobroff authored
The EEH address cache is currently initialized and populated by a single function: eeh_addr_cache_build(). While the initial population of the cache can only be done once resources are allocated, initialization (just setting up a spinlock) could be done much earlier. So move the initialization step into a separate function and call it from a core_initcall (rather than a subsys initcall). This will allow future work to make use of the cache during boot time PCI scanning. Signed-off-by:
Alexey Kardashevskiy <aik@ozlabs.ru> Signed-off-by:
-
Sam Bobroff authored
Also remove useless comment. Signed-off-by:
-
Sam Bobroff authored
The EEH_DEV_NO_HANDLER flag is used by the EEH system to prevent the use of driver callbacks in drivers that have been bound part way through the recovery process. This is necessary to prevent later stage handlers from being called when the earlier stage handlers haven't, which can be confusing for drivers. However, the flag is set for all devices that are added after boot time and only cleared at the end of the EEH recovery process. This results in hot plugged devices erroneously having the flag set during the first recovery after they are added (causing their driver's handlers to be incorrectly ignored). To remedy this, clear the flag at the beginning of recovery processing. The flag is still cleared at the end of recovery processing, although it is no longer really necessary. Also clear the flag during eeh_handle_special_event(), for the same reasons. Signed-off-by:
-
Sam Bobroff authored
The pcibios_init() function for PowerPC 64 currently calls pci_bus_add_devices() before pcibios_resource_survey(). This means that at boot time, when the pcibios_bus_add_device() hooks are called by pci_bus_add_devices(), device resources have not been allocated and they are unable to perform EEH setup, so a separate pass is needed. This patch adjusts that order so that it will become possible to consolidate the EEH setup work into a single location. The only functional change is to execute pcibios_resource_survey() (excepting ppc_md.pcibios_fixup(), see below) before pci_bus_add_devices() instead of after it. Because pcibios_scan_phb() and pci_bus_add_devices() are called together in a loop, this must be broken into one loop for each call. Then the call to pcibios_resource_survey() is moved up in between them. This changes the ordering but because pcibios_resource_survey() also calls ppc_md.pcibios_fixup(), that call is extracted out into pcibios_init() to where pcibios_resource_survey() was, so that it is not moved. The only other caller of pcibios_resource_survey() is the PowerPC 32 version of pcibios_init(), and therefore, that is modified to call ppc_md.pcibios_fixup() right after pcibios_resource_survey() so that there is no functional change there at all. The re-arrangement will cause very few side-effects because at this stage in the boot, pci_bus_add_devices() does very little: - pci_create_sysfs_dev_files() does nothing (no sysfs yet) - pci_proc_attach_device() does nothing (no proc yet) - device_attach() does nothing (no drivers yet) This leaves only the pci_final_fixup calls, D3 support, and marking the device as added. Of those, only the pci_final_fixup calls have the potential to be affected by resource allocation. The only pci_final_fixup handlers that touch resources seem to be one for x86 (pci_amd_enable_64bit_bar()), and a PowerPC 32 platform driver (quirk_final_uli1575()), neither of which use this pcibios_init() function. Even if they did, it would almost certainly be a bug, under the current ordering, to rely on or make changes to resources before they were allocated. Signed-off-by:
-
Masahiro Yamada authored
The KBUILD_ARFLAGS addition in arch/powerpc/Makefile has never worked in a useful way because it is always overridden by the following code in the top Makefile: # use the deterministic mode of AR if available KBUILD_ARFLAGS := $(call ar-option,D) The code in the top Makefile was added in 2011, by commit 40df759e ("kbuild: Fix build with binutils <= 2.19"). The KBUILD_ARFLAGS addition for ppc has always been dead code from the beginning. Nobody has reported a problem since 43c9127d ("powerpc: Add option to use thin archives"), so this code was unneeded. Signed-off-by:
Masahiro Yamada <yamada.masahiro@socionext.com> Signed-off-by:
-
- 21 Aug, 2019 7 commits
-
-
Santosh Sivaraj authored
Use memcpy_mcsafe() implementation to define copy_to_user_mcsafe() Signed-off-by:
Santosh Sivaraj <santosh@fossix.org> Signed-off-by:
-
Balbir Singh authored
The pmem infrastructure uses memcpy_mcsafe in the pmem layer so as to convert machine check exceptions into a return value on failure in case a machine check exception is encountered during the memcpy. The return value is the number of bytes remaining to be copied. This patch largely borrows from the copyuser_power7 logic and does not add the VMX optimizations, largely to keep the patch simple. If needed those optimizations can be folded in. Signed-off-by:
Balbir Singh <bsingharora@gmail.com> [arbab@linux.ibm.com: Added symbol export] Co-developed-by:
-
Balbir Singh authored
If we take a UE on one of the instructions with a fixup entry, set nip to continue execution at the fixup entry. Stop processing the event further or print it. Co-developed-by:
Reza Arbab <arbab@linux.ibm.com> Signed-off-by:
Mahesh Salgaonkar <mahesh@linux.vnet.ibm.com> Reviewed-by:
Nicholas Piggin <npiggin@gmail.com> Signed-off-by:
-
Santosh Sivaraj authored
Certain architecture specific operating modes (e.g., in powerpc machine check handler that is unable to access vmalloc memory), the search_exception_tables cannot be called because it also searches the module exception tables if entry is not found in the kernel exception table. Signed-off-by:
-
Reza Arbab authored
The function doesn't get used outside this file, so make it static. Signed-off-by:
-
Balbir Singh authored
The current code would fail on huge pages addresses, since the shift would be incorrect. Use the correct page shift value returned by __find_linux_pte() to get the correct physical address. The code is more generic and can handle both regular and compound pages. Fixes: ba41e1e1 ("powerpc/mce: Hookup derror (load/store) UE errors") Signed-off-by:
-
Santosh Sivaraj authored
schedule_work() cannot be called from MCE exception context as MCE can interrupt even in interrupt disabled context. Fixes: 733e4a4c ("powerpc/mce: hookup memory_failure for UE errors") Cc: stable@vger.kernel.org # v4.15+ Reviewed-by:
-
- 20 Aug, 2019 4 commits
-
-
Nathan Lynch authored
After a partition migration, pseries_devicetree_update() processes changes to the device tree communicated from the platform to Linux. This is a relatively heavyweight operation, with multiple device tree searches, memory allocations, and conversations with partition firmware. There's a few levels of nested loops which are bounded only by decisions made by the platform, outside of Linux's control, and indeed we have seen RCU stalls on large systems while executing this call graph. Use cond_resched() in these loops so that the cpu is yielded when needed. Signed-off-by:
Nathan Lynch <nathanl@linux.ibm.com> Signed-off-by:
-
Nathan Lynch authored
rtas_cpu_state_change_mask() potentially operates on scores of cpus, so explicitly allow rescheduling in the loop body. Signed-off-by:
Gautham R. Shenoy <ego@linux.vnet.ibm.com> Signed-off-by:
-
Nathan Lynch authored
The LPAR migration implementation and userspace-initiated cpu hotplug can interleave their executions like so: 1. Set cpu 7 offline via sysfs. 2. Begin a partition migration, whose implementation requires the OS to ensure all present cpus are online; cpu 7 is onlined: rtas_ibm_suspend_me -> rtas_online_cpus_mask -> cpu_up This sets cpu 7 online in all respects except for the cpu's corresponding struct device; dev->offline remains true. 3. Set cpu 7 online via sysfs. _cpu_up() determines that cpu 7 is already online and returns success. The driver core (device_online) sets dev->offline = false. 4. The migration completes and restores cpu 7 to offline state: rtas_ibm_suspend_me -> rtas_offline_cpus_mask -> cpu_down This leaves cpu7 in a state where the driver core considers the cpu device online, but in all other respects it is offline and unused. Attempts to online the cpu via sysfs appear to succeed but the driver core actually does not pass the request to the lower-level cpuhp support code. This makes the cpu unusable until the cpu device is manually set offline and then online again via sysfs. Instead of directly calling cpu_up/cpu_down, the migration code should use the higher-level device core APIs to maintain consistent state and serialize operations. Fixes: 120496ac ("powerpc: Bring all threads online prior to migration/hibernation") Signed-off-by: -
Christophe Leroy authored
If a page is already mapped RW without the DIRTY flag, the DIRTY flag is never set and a TLB store miss exception is taken forever. This is easily reproduced with the following app: void main(void) { volatile char *ptr = mmap(0, 4096, PROT_READ | PROT_WRITE, MAP_SHARED | MAP_ANONYMOUS, -1, 0); *ptr = *ptr; } When DIRTY flag is not set, bail out of TLB miss handler and take a minor page fault which will set the DIRTY flag. Fixes: f8b58c64 ("powerpc/603: let's handle PAGE_DIRTY directly") Cc: stable@vger.kernel.org # v5.1+ Reported-by:Doug Crawford <doug.crawford@intelight-its.com> Signed-off-by:
-
