Load Modular Math Processor(MMP) firmware into QAT devices to support
public key algorithm acceleration.
Signed-off-by: Pingchao Yang <pingchao.yang@intel.com>
Signed-off-by: Tadeusz Struk <tadeusz.struk@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Now that all implementations of rfc4309 have been converted we can
reenable the test.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

This patch converts the nx ccm and 4309 implementations to the
new AEAD interface.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

This patch converts the ARM64 aes-ce-ccm implementation to the
new AEAD interface.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Tested-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>

This patch converts generic ccm and its associated transforms to
the new AEAD interface.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

This patch disables the rfc4309 test while the conversion to the
new seqiv calling convention takes place.  It also replaces the
rfc4309 test vectors with ones that will work with the new IV
convention.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

vmx-crypto driver make use of some VSX instructions which are
only available if VSX is enabled. Running in cases where VSX
are not enabled vmx-crypto fails in a VSX exception.

In order to fix this enable_kernel_vsx() was added to turn on
VSX instructions for vmx-crypto.
Signed-off-by: Leonidas S. Barbosa <leosilva@linux.vnet.ibm.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

enable_kernel_vsx() function was commented since anything was using
it. However, vmx-crypto driver uses VSX instructions which are
only available if VSX is enable. Otherwise it rises an exception oops.

This patch uncomment enable_kernel_vsx() routine and makes it available.
Signed-off-by: Leonidas S. Barbosa <leosilva@linux.vnet.ibm.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

platform_driver does not need to set an owner because
platform_driver_register() will set it.
Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Acked-by: Boris Brezillon <boris.brezillon@free-electrons.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Now that all implementations of rfc4106 have been converted we can
reenable the test.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

This patch converts rfc4106 to the new calling convention where
the IV is now part of the AD and needs to be skipped.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

This patch converts rfc4106 to the new calling convention where
the IV is now part of the AD and needs to be skipped.  This patch
also makes use of type-safe AEAD functions where possible.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

This patch converts rfc4106 to the new calling convention where
the IV is now part of the AD and needs to be skipped.  This patch
also makes use of the new type-safe way of freeing instances.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

This patch converts rfc4106 to the new calling convention where
the IV is now in the AD and needs to be skipped.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

This patch allows the AEAD speed tests to cope with the new seqiv
calling convention as well as the old one.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

This patch disables the rfc4106 test while the conversion to the
new seqiv calling convention takes place.  It also converts the
rfc4106 test vectors to the new format.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

This patch allows the CRYPTO_ALG_AEAD_NEW flag to be propagated.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

This patch replaces the seqniv generator with seqiv when the
underlying algorithm understands the new calling convention.

This not only makes more sense as now seqiv is solely responsible
for IV generation rather than also determining how the IV is going
to be used, it also allows for optimisations in the underlying
implementation.  For example, the space for the IV could be used
to add padding for authentication.

This patch also removes the unnecessary copying of IV to dst
during seqiv decryption as the IV is part of the AD and not cipher
text.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

This patch fixes a bug where we were incorrectly including the
IV in the AD during encryption.  The IV must remain in the plain
text for it to be encrypted.

During decryption there is no need to copy the IV to dst because
it's now part of the AD.

This patch removes an unncessary check on authsize which would be
performed by the underlying decrypt call.

Finally this patch makes use of the type-safe init/exit functions.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

This patch allows the CRYPTO_ALG_AEAD_NEW flag to be propagated.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

This patch allows the CRYPTO_ALG_AEAD_NEW flag to be propagated.

It also restores the ASYNC bit that went missing during the AEAD
conversion.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

This patch adds a type-safe function for freeing AEAD instances
to struct aead_instance.  This replaces the existing free function
in struct crypto_template which does not know the type of the
instance that it's freeing.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Currently the task of freeing an instance is given to the crypto
template.  However, it has no type information on the instance so
we have to resort to checking type information at runtime.

This patch introduces a free function to crypto_type that will be
used to free an instance.  This can then be used to free an instance
in a type-safe manner.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

The transform context is shared memory and must not be written
to without locking.  This patch adds locking to nx-842 to prevent
context corruption.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

This patch adds a type-safe queueing interface for AEAD.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

The function __crypto_dequeue_request is completely unused.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Merge the crypto tree to pull in the nx reentrancy patch.

The AEAD speed tests doesn't do a wait_for_completition,
if the return value is EINPROGRESS or EBUSY.
Fixing it here.
Also add a test case for gcm(aes).
Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Use BIT()/GENMASK() macros for all register definitions instead of
hand-writing bit masks.
Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

AES_CTRL_REG is used to configure AES mode. Before configuring
any mode we need to make sure all other modes are reset or else
driver will misbehave. So mask all modes before configuring
any AES mode.
Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Increasing the priority of omap-aes hw algos, in order to take
precedence over sw algos.
Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Algo self tests are failing for CTR mode with omap-aes driver,
giving the following error:

[  150.053644]       omap_aes_crypt: request size is not exact amount of AES blocks
[  150.061262] alg: skcipher: encryption failed on test 5 for ctr-aes-omap: ret=22

This is because the input length is not aligned with AES_BLOCK_SIZE.
Adding support for omap-aes driver for inputs with length not aligned
with AES_BLOCK_SIZE.
Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

This patch fixes a host of reentrancy bugs in the nx driver.  The
following algorithms are affected:

* CCM
* GCM
* CTR
* XCBC
* SHA256
* SHA512

The crypto API allows a single transform to be used by multiple
threads simultaneously.  For example, IPsec will use a single tfm
to process packets for a given SA.  As packets may arrive on
multiple CPUs that tfm must be reentrant.

The nx driver does try to deal with this by using a spin lock.
Unfortunately only the basic AES/CBC/ECB algorithms do this in
the correct way.

The symptom of these bugs may range from the generation of incorrect
output to memory corruption.

Cc: stable@vger.kernel.org
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

While we never would successfully load on the wrong machine type, there
is extra output by default regardless of machine type.

For instance, on a PowerVM LPAR, we see the following:

nx_compress_powernv: loading
nx_compress_powernv: no coprocessors found

even though those coprocessors could never be found.
Signed-off-by: Nishanth Aravamudan <nacc@linux.vnet.ibm.com>
Cc: Dan Streetman <ddstreet@us.ibm.com>
Cc: Herbert Xu <herbert@gondor.apana.org.au>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: linux-crypto@vger.kernel.org
Cc: linuxppc-dev@lists.ozlabs.org
Acked-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

All tests for cbc(aes) use only blocks of data with a multiple of 4.
This test adds a test with some odd SG size.
Signed-off-by: LABBE Corentin <clabbe.montjoie@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

The AEAD version of cryptd uses the same context for its own state
as well as that of the child.  In doing so it did not maintain the
proper ordering, thus resulting in potential state corruption where
the child will overwrite the state stored by cryptd.

This patch fixes and also sets the request size properly.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

These files are generated since commits f2f770d7 (crypto: arm/sha256 - Add
optimized SHA-256/224, 2015-04-03) and c80ae7ca (crypto: arm/sha512 -
accelerated SHA-512 using ARM generic ASM and NEON, 2015-05-08).

Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Acked-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

If the device-tree indicates the nx-842 device's status is 'disabled',
we emit two messages:

nx_compress_pseries ibm,compression-v1: nx842_OF_upd_status: status 'disabled' is not 'okay'.
nx_compress_pseries ibm,compression-v1: nx842_OF_upd: device disabled

Given that 'disabled' is a valid state, and we are going to emit that
the device is disabled, only print out a non-'okay' status if it is not
'disabled'.
Signed-off-by: Nishanth Aravamudan <nacc@linux.vnet.ibm.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

While there is no technical reason that both nx-842.c and
nx-842-pseries.c can have the same name for the init/exit functions, it
is a bit confusing with initcall_debug. Rename the pseries specific
functions appropriately
Signed-off-by: Nishanth Aravamudan <nacc@linux.vnet.ibm.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

The current documention mentions explicitly that EINVAL should be
returned if the device is not available, but nx842_OF_upd_status()
always returns 0. However, nx842_probe() specifically checks for
non-ENODEV returns from nx842_of_upd() (which in turn calls
nx842_OF_upd_status()) and emits an extra error in that case. It seems
like the proper return code of a disabled device is ENODEV.
Signed-off-by: Nishanth Aravamudan <nacc@linux.vnet.ibm.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>