- 23 Apr, 2020 7 commits
-
-
Martin Fuzzey authored
commit 4141f1a4 upstream. In order to wake from suspend by ethernet magic packets the GPC must be used as intc does not have wakeup functionality. But the FEC DT node currently uses interrupt-extended, specificying intc, thus breaking WoL. This problem is probably fallout from the stacked domain conversion as intc used to chain to GPC. So replace "interrupts-extended" by "interrupts" to use the default parent which is GPC. Fixes: b923ff6a ("ARM: imx6: convert GPC to stacked domains") Signed-off-by:
Martin Fuzzey <martin.fuzzey@flowbird.group> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Luke Nelson authored
commit bb9562cf upstream. The current arm BPF JIT does not correctly compile RSH or ARSH when the immediate shift amount is 0. This causes the "rsh64 by 0 imm" and "arsh64 by 0 imm" BPF selftests to hang the kernel by reaching an instruction the verifier determines to be unreachable. The root cause is in how immediate right shifts are encoded on arm. For LSR and ASR (logical and arithmetic right shift), a bit-pattern of 00000 in the immediate encodes a shift amount of 32. When the BPF immediate is 0, the generated code shifts by 32 instead of the expected behavior (a no-op). This patch fixes the bugs by adding an additional check if the BPF immediate is 0. After the change, the above mentioned BPF selftests pass. Fixes: 39c13c20 ("arm: eBPF JIT compiler") Co-developed-by:
Xi Wang <xi.wang@gmail.com> Signed-off-by:
Luke Nelson <luke.r.nels@gmail.com> Signed-off-by:
Daniel Borkmann <daniel@iogearbox.net> Link: https://lore.kernel.org/bpf/20200408181229.10909-1-luke.r.nels@gmail.comSigned-off-by:
-
Michael Walle authored
commit ea104a9e upstream. The restart handler is missing two things, first, the registers has to be unlocked and second there is no synchronization for the write_relaxed() calls. This was tested on a custom board with the NXP LS1028A SoC. Fixes: 6c5c0d48 ("watchdog: sp805: add restart handler") Signed-off-by:
Michael Walle <michael@walle.cc> Reviewed-by:
Guenter Roeck <linux@roeck-us.net> Link: https://lore.kernel.org/r/20200327162450.28506-1-michael@walle.ccSigned-off-by:
Wim Van Sebroeck <wim@linux-watchdog.org> Signed-off-by:
-
Roman Gushchin authored
commit d87f6392 upstream. Since commit a8ac900b ("ext4: use non-movable memory for the superblock") buffers for ext4 superblock were allocated using the sb_bread_unmovable() helper which allocated buffer heads out of non-movable memory blocks. It was necessarily to not block page migrations and do not cause cma allocation failures. However commit 85c8f176 ("ext4: preload block group descriptors") broke this by introducing pre-reading of the ext4 superblock. The problem is that __breadahead() is using __getblk() underneath, which allocates buffer heads out of movable memory. It resulted in page migration failures I've seen on a machine with an ext4 partition and a preallocated cma area. Fix this by introducing sb_breadahead_unmovable() and __breadahead_gfp() helpers which use non-movable memory for buffer head allocations and use them for the ext4 superblock readahead. Reviewed-by:
Andreas Dilger <adilger@dilger.ca> Fixes: 85c8f176 ("ext4: preload block group descriptors") Signed-off-by:
Roman Gushchin <guro@fb.com> Link: https://lore.kernel.org/r/20200229001411.128010-1-guro@fb.comSigned-off-by:
Theodore Ts'o <tytso@mit.edu> Signed-off-by:
-
Li Bin authored
commit 849f8583 upstream. If the dxfer_len is greater than 256M then the request is invalid and we need to call sg_remove_request in sg_common_write. Link: https://lore.kernel.org/r/1586777361-17339-1-git-send-email-huawei.libin@huawei.com Fixes: f930c704 ("scsi: sg: only check for dxfer_len greater than 256M") Acked-by:
Douglas Gilbert <dgilbert@interlog.com> Signed-off-by:
Li Bin <huawei.libin@huawei.com> Signed-off-by:
Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by:
-
Josh Poimboeuf authored
commit b401efc1 upstream. If a switch jump table's indirect branch is in a ".cold" subfunction in .text.unlikely, objtool doesn't detect it, and instead prints a false warning: drivers/media/v4l2-core/v4l2-ioctl.o: warning: objtool: v4l_print_format.cold()+0xd6: sibling call from callable instruction with modified stack frame drivers/hwmon/max6650.o: warning: objtool: max6650_probe.cold()+0xa5: sibling call from callable instruction with modified stack frame drivers/media/dvb-frontends/drxk_hard.o: warning: objtool: init_drxk.cold()+0x16f: sibling call from callable instruction with modified stack frame Fix it by comparing the function, instead of the section and offset. Fixes: 13810435 ("objtool: Support GCC 8's cold subfunctions") Signed-off-by:
Josh Poimboeuf <jpoimboe@redhat.com> Signed-off-by:
Borislav Petkov <bp@suse.de> Reviewed-by:
Miroslav Benes <mbenes@suse.cz> Acked-by:
Peter Zijlstra (Intel) <peterz@infradead.org> Link: https://lkml.kernel.org/r/157c35d42ca9b6354bbb1604fe9ad7d1153ccb21.1585761021.git.jpoimboe@redhat.comSigned-off-by:
-
Luke Nelson authored
commit 4178417c upstream. This patch fixes an incorrect check in how immediate memory offsets are computed for BPF_DW on arm. For BPF_LDX/ST/STX + BPF_DW, the 32-bit arm JIT breaks down an 8-byte access into two separate 4-byte accesses using off+0 and off+4. If off fits in imm12, the JIT emits a ldr/str instruction with the immediate and avoids the use of a temporary register. While the current check off <= 0xfff ensures that the first immediate off+0 doesn't overflow imm12, it's not sufficient for the second immediate off+4, which may cause the second access of BPF_DW to read/write the wrong address. This patch fixes the problem by changing the check to off <= 0xfff - 4 for BPF_DW, ensuring off+4 will never overflow. A side effect of simplifying the check is that it now allows using negative immediate offsets in ldr/str. This means that small negative offsets can also avoid the use of a temporary register. This patch introduces no new failures in test_verifier or test_bpf.c. Fixes: c5eae692 ("ARM: net: bpf: improve 64-bit store implementation") Fixes: ec19e02b ("ARM: net: bpf: fix LDX instructions") Co-developed-by:
-
- 21 Apr, 2020 33 commits
-
-
Greg Kroah-Hartman authored
-
Austin Kim authored
commit 7ea36242 upstream. If !area->pages statement is true where memory allocation fails, area is freed. In this case 'area->pages = pages' should not executed. So move 'area->pages = pages' after if statement. [akpm@linux-foundation.org: give area->pages the same treatment] Link: http://lkml.kernel.org/r/20190830035716.GA190684@LGEARND20B15Signed-off-by:
Austin Kim <austindh.kim@gmail.com> Acked-by:
Michal Hocko <mhocko@suse.com> Reviewed-by:
Andrew Morton <akpm@linux-foundation.org> Cc: Uladzislau Rezki (Sony) <urezki@gmail.com> Cc: Roman Gushchin <guro@fb.com> Cc: Roman Penyaev <rpenyaev@suse.de> Cc: Rick Edgecombe <rick.p.edgecombe@intel.com> Cc: Mike Rapoport <rppt@linux.ibm.com> Cc: Andrey Ryabinin <aryabinin@virtuozzo.com> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by:
Lee Jones <lee.jones@linaro.org> Signed-off-by:
-
Karthick Gopalasubramanian authored
commit 32dcfe83 upstream. Reset file is not used and may cause race conditions with operational driver if used. Signed-off-by:
Karthick Gopalasubramanian <kargop@codeaurora.org> Signed-off-by:
Maya Erez <merez@codeaurora.org> Signed-off-by:
Kalle Valo <kvalo@codeaurora.org> Signed-off-by:
-
Dedy Lansky authored
commit 61e5ec04 upstream. When enlarging rx_ring_order module param, wil6210 fails to load because there are not enough Rx buffers. Fix this by enlarging number of Rx buffers at startup, if needed based on rx_ring_order. Signed-off-by:
Dedy Lansky <dlansky@codeaurora.org> Signed-off-by:
-
Alexei Avshalom Lazar authored
commit ac0e541a upstream. Initialize unset variable, and verify that mid is valid. Signed-off-by:
Alexei Avshalom Lazar <ailizaro@codeaurora.org> Signed-off-by:
-
Maya Erez authored
commit 979c9d8d upstream. HALP ICR is set as long as the FW should stay awake. To prevent its multiple handling the driver masks this IRQ bit. However, if there is a different MISC ICR before the driver clears this bit, there is a risk of race condition between HALP mask and unmask. This race leads to HALP timeout, in case it is mistakenly masked. Add an atomic flag to indicate if HALP ICR should be handled. Signed-off-by:
-
Dedy Lansky authored
commit d6a553c0 upstream. Make sure rx_buff_mgmt is initialized before accessing it. Signed-off-by:
-
Reinette Chatre authored
commit b0151da5 upstream. The default resource group ("rdtgroup_default") is associated with the root of the resctrl filesystem and should never be removed. New resource groups can be created as subdirectories of the resctrl filesystem and they can be removed from user space. There exists a safeguard in the directory removal code (rdtgroup_rmdir()) that ensures that only subdirectories can be removed by testing that the directory to be removed has to be a child of the root directory. A possible deadlock was recently fixed with 334b0f4e ("x86/resctrl: Fix a deadlock due to inaccurate reference"). This fix involved associating the private data of the "mon_groups" and "mon_data" directories to the resource group to which they belong instead of NULL as before. A consequence of this change was that the original safeguard code preventing removal of "mon_groups" and "mon_data" found in the root directory failed resulting in attempts to remove the default resource group that ends in a BUG: kernel BUG at mm/slub.c:3969! invalid opcode: 0000 [#1] SMP PTI Call Trace: rdtgroup_rmdir+0x16b/0x2c0 kernfs_iop_rmdir+0x5c/0x90 vfs_rmdir+0x7a/0x160 do_rmdir+0x17d/0x1e0 do_syscall_64+0x55/0x1d0 entry_SYSCALL_64_after_hwframe+0x44/0xa9 Fix this by improving the directory removal safeguard to ensure that subdirectories of the resctrl root directory can only be removed if they are a child of the resctrl filesystem's root _and_ not associated with the default resource group. Fixes: 334b0f4e ("x86/resctrl: Fix a deadlock due to inaccurate reference") Reported-by:
Sai Praneeth Prakhya <sai.praneeth.prakhya@intel.com> Signed-off-by:
Reinette Chatre <reinette.chatre@intel.com> Signed-off-by:
-
James Morse authored
commit 9fe04507 upstream. Resctrl assumes that all CPUs are online when the filesystem is mounted, and that CPUs remember their CDP-enabled state over CPU hotplug. This goes wrong when resctrl's CDP-enabled state changes while all the CPUs in a domain are offline. When a domain comes online, enable (or disable!) CDP to match resctrl's current setting. Fixes: 5ff193fb ("x86/intel_rdt: Add basic resctrl filesystem support") Suggested-by:
James Morse <james.morse@arm.com> Signed-off-by:
-
John Allen authored
commit bdf89df3 upstream. Future AMD CPUs will have microcode patches that exceed the default 4K patch size. Raise our limit. Signed-off-by:
John Allen <john.allen@amd.com> Signed-off-by:
-
Maurizio Lombardi authored
[ Upstream commit 57c46e9f ] A number of hangs have been reported against the target driver; they are due to the fact that multiple threads may try to destroy the iscsi session at the same time. This may be reproduced for example when a "targetcli iscsi/iqn.../tpg1 disable" command is executed while a logout operation is underway. When this happens, two or more threads may end up sleeping and waiting for iscsit_close_connection() to execute "complete(session_wait_comp)". Only one of the threads will wake up and proceed to destroy the session structure, the remaining threads will hang forever. Note that if the blocked threads are somehow forced to wake up with complete_all(), they will try to free the same iscsi session structure destroyed by the first thread, causing double frees, memory corruptions etc... With this patch, the threads that want to destroy the iscsi session will increase the session refcount and will set the "session_close" flag to 1; then they wait for the driver to close the remaining active connections. When the last connection is closed, iscsit_close_connection() will wake up all the threads and will wait for the session's refcount to reach zero; when this happens, iscsit_close_connection() will destroy the session structure because no one is referencing it anymore. INFO: task targetcli:5971 blocked for more than 120 seconds. Tainted: P OE 4.15.0-72-generic #81~16.04.1 "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. targetcli D 0 5971 1 0x00000080 Call Trace: __schedule+0x3d6/0x8b0 ? vprintk_func+0x44/0xe0 schedule+0x36/0x80 schedule_timeout+0x1db/0x370 ? __dynamic_pr_debug+0x8a/0xb0 wait_for_completion+0xb4/0x140 ? wake_up_q+0x70/0x70 iscsit_free_session+0x13d/0x1a0 [iscsi_target_mod] iscsit_release_sessions_for_tpg+0x16b/0x1e0 [iscsi_target_mod] iscsit_tpg_disable_portal_group+0xca/0x1c0 [iscsi_target_mod] lio_target_tpg_enable_store+0x66/0xe0 [iscsi_target_mod] configfs_write_file+0xb9/0x120 __vfs_write+0x1b/0x40 vfs_write+0xb8/0x1b0 SyS_write+0x5c/0xe0 do_syscall_64+0x73/0x130 entry_SYSCALL_64_after_hwframe+0x3d/0xa2 Link: https://lore.kernel.org/r/20200313170656.9716-3-mlombard@redhat.comReported-by:
Matt Coleman <mcoleman@datto.com> Tested-by:
Rahul Kundu <rahul.kundu@chelsio.com> Signed-off-by:
Maurizio Lombardi <mlombard@redhat.com> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Maurizio Lombardi authored
[ Upstream commit e49a7d99 ] iscsit_free_session() is equivalent to iscsit_stop_session() followed by a call to iscsit_close_session(). Link: https://lore.kernel.org/r/20200313170656.9716-2-mlombard@redhat.comTested-by:
-
Jim Mattson authored
commit 396d2e87 upstream. The host reports support for the synthetic feature X86_FEATURE_SSBD when any of the three following hardware features are set: CPUID.(EAX=7,ECX=0):EDX.SSBD[bit 31] CPUID.80000008H:EBX.AMD_SSBD[bit 24] CPUID.80000008H:EBX.VIRT_SSBD[bit 25] Either of the first two hardware features implies the existence of the IA32_SPEC_CTRL MSR, but CPUID.80000008H:EBX.VIRT_SSBD[bit 25] does not. Therefore, CPUID.(EAX=7,ECX=0):EDX.SSBD[bit 31] should only be set in the guest if CPUID.(EAX=7,ECX=0):EDX.SSBD[bit 31] or CPUID.80000008H:EBX.AMD_SSBD[bit 24] is set on the host. Fixes: 0c54914d ("KVM: x86: use Intel speculation bugs and features as derived in generic x86 code") Signed-off-by:
Jim Mattson <jmattson@google.com> Reviewed-by:
Jacob Xu <jacobhxu@google.com> Reviewed-by:
Peter Shier <pshier@google.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Reported-by:
Eric Biggers <ebiggers@kernel.org> Signed-off-by:
Paolo Bonzini <pbonzini@redhat.com> [bwh: Backported to 4.x: adjust indentation] Signed-off-by:
Ben Hutchings <ben@decadent.org.uk> Signed-off-by:
-
Jan Kara authored
commit 801674f3 upstream. We do not want to create initialized extents beyond end of file because for e2fsck it is impossible to distinguish them from a case of corrupted file size / extent tree and so it complains like: Inode 12, i_size is 147456, should be 163840. Fix? no Code in ext4_ext_convert_to_initialized() and ext4_split_convert_extents() try to make sure it does not create initialized extents beyond inode size however they check against inode->i_size which is wrong. They should instead check against EXT4_I(inode)->i_disksize which is the current inode size on disk. That's what e2fsck is going to see in case of crash before all dirty data is written. This bug manifests as generic/456 test failure (with recent enough fstests where fsx got fixed to properly pass FALLOC_KEEP_SIZE_FL flags to the kernel) when run with dioread_lock mount option. CC: stable@vger.kernel.org Fixes: 21ca087a ("ext4: Do not zero out uninitialized extents beyond i_size") Reviewed-by:
Lukas Czerner <lczerner@redhat.com> Signed-off-by:
Jan Kara <jack@suse.cz> Signed-off-by:
-
Sergei Lopatin authored
commit 8c7f0a44 upstream. Should prevent flicker if PP_OVERDRIVE_MASK is set. bug: https://bugs.freedesktop.org/show_bug.cgi?id=102646 bug: https://bugs.freedesktop.org/show_bug.cgi?id=108941 bug: https://gitlab.freedesktop.org/drm/amd/-/issues/1088 bug: https://gitlab.freedesktop.org/drm/amd/-/issues/628Signed-off-by:
Sergei Lopatin <magist3r@gmail.com> Signed-off-by:
Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org Signed-off-by:
-
Thinh Nguyen authored
[ Upstream commit a114c4ca ] We track END_TRANSFER command completion. Don't clear transfer started/ended flag prematurely. Otherwise, we'd run into the problem with restarting transfer before END_TRANSFER command finishes. Fixes: 6d8a0196 ("usb: dwc3: gadget: check for Missed Isoc from event status") Signed-off-by:
Thinh Nguyen <thinhn@synopsys.com> Signed-off-by:
Felipe Balbi <balbi@kernel.org> Signed-off-by:
-
Sasha Levin authored
[ Upstream commit c5353b22 ] Since we're disabling the endpoint anyway, we don't worry about getting endpoint command completion interrupt. Signed-off-by:
Felipe Balbi <felipe.balbi@linux.intel.com> Signed-off-by:
-
Tuomas Tynkkynen authored
commit 7ea86204 upstream. syzbot reports a warning: precision 33020 too large WARNING: CPU: 0 PID: 9618 at lib/vsprintf.c:2471 set_precision+0x150/0x180 lib/vsprintf.c:2471 vsnprintf+0xa7b/0x19a0 lib/vsprintf.c:2547 kvasprintf+0xb2/0x170 lib/kasprintf.c:22 kasprintf+0xbb/0xf0 lib/kasprintf.c:59 hwsim_del_radio_nl+0x63a/0x7e0 drivers/net/wireless/mac80211_hwsim.c:3625 genl_family_rcv_msg_doit net/netlink/genetlink.c:672 [inline] ... entry_SYSCALL_64_after_hwframe+0x49/0xbe Thus it seems that kasprintf() with "%.*s" format can not be used for duplicating a string with arbitrary length. Replace it with kstrndup(). Note that later this string is limited to NL80211_WIPHY_NAME_MAXLEN == 64, but the code is simpler this way. Reported-by: syzbot+6693adf1698864d21734@syzkaller.appspotmail.com Reported-by: syzbot+a4aee3f42d7584d76761@syzkaller.appspotmail.com Cc: stable@kernel.org Signed-off-by:
Tuomas Tynkkynen <tuomas.tynkkynen@iki.fi> Link: https://lore.kernel.org/r/20200410123257.14559-1-tuomas.tynkkynen@iki.fi [johannes: add note about length limit] Signed-off-by:
Johannes Berg <johannes.berg@intel.com> Signed-off-by:
-
Josef Bacik authored
commit 4d4225fc upstream. Previously we would set the reloc root's last snapshot to transid - 1. However there was a problem with doing this, and we changed it to setting the last snapshot to the generation of the commit node of the fs root. This however broke should_ignore_root(). The assumption is that if we are in a generation newer than when the reloc root was created, then we would find the reloc root through normal backref lookups, and thus can ignore any fs roots we find with an old enough reloc root. Now that the last snapshot could be considerably further in the past than before, we'd end up incorrectly ignoring an fs root. Thus we'd find no nodes for the bytenr we were searching for, and we'd fail to relocate anything. We'd loop through the relocate code again and see that there were still used space in that block group, attempt to relocate those bytenr's again, fail in the same way, and just loop like this forever. This is tricky in that we have to not modify the fs root at all during this time, so we need to have a block group that has data in this fs root that is not shared by any other root, which is why this has been difficult to reproduce. Fixes: 054570a1 ("Btrfs: fix relocation incorrectly dropping data references") CC: stable@vger.kernel.org # 4.9+ Reviewed-by:
Filipe Manana <fdmanana@suse.com> Signed-off-by:
Josef Bacik <josef@toxicpanda.com> Signed-off-by:
David Sterba <dsterba@suse.com> Signed-off-by:
-
Xiao Yang authored
tracing: Fix the race between registering 'snapshot' event trigger and triggering 'snapshot' operation commit 0bbe7f71 upstream. Traced event can trigger 'snapshot' operation(i.e. calls snapshot_trigger() or snapshot_count_trigger()) when register_snapshot_trigger() has completed registration but doesn't allocate buffer for 'snapshot' event trigger. In the rare case, 'snapshot' operation always detects the lack of allocated buffer so make register_snapshot_trigger() allocate buffer first. trigger-snapshot.tc in kselftest reproduces the issue on slow vm: ----------------------------------------------------------- cat trace ... ftracetest-3028 [002] .... 236.784290: sched_process_fork: comm=ftracetest pid=3028 child_comm=ftracetest child_pid=3036 <...>-2875 [003] .... 240.460335: tracing_snapshot_instance_cond: *** SNAPSHOT NOT ALLOCATED *** <...>-2875 [003] .... 240.460338: tracing_snapshot_instance_cond: *** stopping trace here! *** ----------------------------------------------------------- Link: http://lkml.kernel.org/r/20200414015145.66236-1-yangx.jy@cn.fujitsu.com Cc: stable@vger.kernel.org Fixes: 93e31ffb ("tracing: Add 'snapshot' event trigger command") Signed-off-by:
Xiao Yang <yangx.jy@cn.fujitsu.com> Signed-off-by:
Steven Rostedt (VMware) <rostedt@goodmis.org> Signed-off-by:
-
Vasily Averin authored
commit 86d32f9a upstream. If seq_file .next function does not change position index, read after some lseek can generate unexpected output: $ dd if=/proc/keys bs=1 # full usual output 0f6bfdf5 I--Q--- 2 perm 3f010000 1000 1000 user 4af2f79ab8848d0a: 740 1fb91b32 I--Q--- 3 perm 1f3f0000 1000 65534 keyring _uid.1000: 2 27589480 I--Q--- 1 perm 0b0b0000 0 0 user invocation_id: 16 2f33ab67 I--Q--- 152 perm 3f030000 0 0 keyring _ses: 2 33f1d8fa I--Q--- 4 perm 3f030000 1000 1000 keyring _ses: 1 3d427fda I--Q--- 2 perm 3f010000 1000 1000 user 69ec44aec7678e5a: 740 3ead4096 I--Q--- 1 perm 1f3f0000 1000 65534 keyring _uid_ses.1000: 1 521+0 records in 521+0 records out 521 bytes copied, 0,00123769 s, 421 kB/s But a read after lseek in middle of last line results in the partial last line and then a repeat of the final line: $ dd if=/proc/keys bs=500 skip=1 dd: /proc/keys: cannot skip to specified offset g _uid_ses.1000: 1 3ead4096 I--Q--- 1 perm 1f3f0000 1000 65534 keyring _uid_ses.1000: 1 0+1 records in 0+1 records out 97 bytes copied, 0,000135035 s, 718 kB/s and a read after lseek beyond end of file results in the last line being shown: $ dd if=/proc/keys bs=1000 skip=1 # read after lseek beyond end of file dd: /proc/keys: cannot skip to specified offset 3ead4096 I--Q--- 1 perm 1f3f0000 1000 65534 keyring _uid_ses.1000: 1 0+1 records in 0+1 records out 76 bytes copied, 0,000119981 s, 633 kB/s See https://bugzilla.kernel.org/show_bug.cgi?id=206283 Fixes: 1f4aace6 ("fs/seq_file.c: simplify seq_file iteration code ...") Signed-off-by:
Vasily Averin <vvs@virtuozzo.com> Signed-off-by:
David Howells <dhowells@redhat.com> Reviewed-by:
Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Cc: stable@vger.kernel.org Signed-off-by:
-
Takashi Iwai authored
commit 934b9659 upstream. Add the mapping check to build_connector_control() so that the device specific quirk can provide the node to skip for the badly behaving connector controls. As an example, ALC1220-VB-based codec implements the skip entry for the broken SPDIF connector detection. BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=206873 Cc: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20200412081331.4742-5-tiwai@suse.deSigned-off-by:
Takashi Iwai <tiwai@suse.de> Signed-off-by:
-
Takashi Iwai authored
commit 7dc3c5a0 upstream. Some funky firmwares set the connector flag even on PCM terminals although it doesn't make sense (and even actually the firmware doesn't react properly!). Let's skip creation of jack controls in such a case. BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=206873 Cc: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20200412081331.4742-4-tiwai@suse.deSigned-off-by:
-
Takashi Iwai authored
commit 3507245b upstream. The mapping table may contain also ignore_ctl_error flag for devices that are known to behave wild. Since this flag always writes the card's own ignore_ctl_error flag, it overrides the value already set by the module option, so it doesn't follow user's expectation. Let's fix the code not to clear the flag that has been set by user. BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=206873 Cc: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20200412081331.4742-3-tiwai@suse.deSigned-off-by:
-
Takashi Iwai authored
commit 48cc4297 upstream. The ignore_ctl_error option should filter the error at kctl accesses, but there was an overlook: mixer_ctl_connector_get() returns an error from the request. This patch covers the forgotten code path and apply filter_error() properly. The locking error is still returned since this is a fatal error that has to be reported even with ignore_ctl_error option. BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=206873 Cc: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20200412081331.4742-2-tiwai@suse.deSigned-off-by:
-
Colin Ian King authored
commit 3025571e upstream. Currently function sst_platform_get_resources always returns zero and error return codes set by the function are never returned. Fix this by returning the error return code in variable ret rather than the hard coded zero. Addresses-Coverity: ("Unused value") Fixes: f533a035 ("ASoC: Intel: mrfld - create separate module for pci part") Signed-off-by:
Colin Ian King <colin.king@canonical.com> Acked-by:
Cezary Rojewski <cezary.rojewski@intel.com> Acked-by:
Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Link: https://lore.kernel.org/r/20200208220720.36657-1-colin.king@canonical.comSigned-off-by:
Mark Brown <broonie@kernel.org> Signed-off-by:
-
Colin Ian King authored
commit f5e056e1 upstream. The check on p->sink looks bogus, I believe it should be p->source since the following code blocks are related to p->source. Fix this by replacing p->sink with p->source. Fixes: 24c8d141 ("ASoC: Intel: mrfld: add DSP core controls") Signed-off-by:
-
Josh Triplett authored
commit b9c538da upstream. If ext4_fill_super detects an invalid number of inodes per group, the resulting error message printed the number of blocks per group, rather than the number of inodes per group. Fix it to print the correct value. Fixes: cd6bb35b ("ext4: use more strict checks for inodes_per_block on mount") Link: https://lore.kernel.org/r/8be03355983a08e5d4eed480944613454d7e2550.1585434649.git.josh@joshtriplett.orgReviewed-by:
Josh Triplett <josh@joshtriplett.org> Signed-off-by:
-
Josh Triplett authored
commit df41460a upstream. ext4_fill_super doublechecks the number of groups before mounting; if that check fails, the resulting error message prints the group count from the ext4_sb_info sbi, which hasn't been set yet. Print the freshly computed group count instead (which at that point has just been computed in "blocks_count"). Signed-off-by:
-
Sven Van Asbroeck authored
commit 9cc5f232 upstream. This driver allows pwms to be requested as gpios via gpiolib. Obviously, it should not be allowed to request a GPIO when its corresponding PWM is already requested (and vice versa). So it requires some exclusion code. Given that the PWMm and GPIO cores are not synchronized with respect to each other, this exclusion code will also require proper synchronization. Such a mechanism was in place, but was inadvertently removed by Uwe's clean-up in commit e926b12c ("pwm: Clear chip_data in pwm_put()"). Upon revisiting the synchronization mechanism, we found that theoretically, it could allow two threads to successfully request conflicting PWMs/GPIOs. Replace with a bitmap which tracks PWMs in-use, plus a mutex. As long as PWM and GPIO's respective request/free functions modify the in-use bitmap while holding the mutex, proper synchronization will be guaranteed. Reported-by:
YueHaibing <yuehaibing@huawei.com> Fixes: e926b12c ("pwm: Clear chip_data in pwm_put()") Cc: Mika Westerberg <mika.westerberg@linux.intel.com> Cc: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Cc: YueHaibing <yuehaibing@huawei.com> Link: https://lkml.org/lkml/2019/5/31/963Signed-off-by:
Sven Van Asbroeck <TheSven73@gmail.com> Reviewed-by:
Mika Westerberg <mika.westerberg@linux.intel.com> [cg: Tested on an i.MX6Q board with two NXP PCA9685 chips] Tested-by:
Clemens Gruber <clemens.gruber@pqgruber.com> Reviewed-by: Sven Van Asbroeck <TheSven73@gmail.com> # cg's rebase Link: https://lore.kernel.org/lkml/20200330160238.GD2817345@ulmo/Signed-off-by:
Thierry Reding <thierry.reding@gmail.com> Signed-off-by:
-
zhangyi (F) authored
commit 780f66e5 upstream. Improve comments in jbd2_journal_commit_transaction() to describe why we don't need to clear the buffer_mapped bit for freeing file mapping buffers whose page mapping is NULL. Link: https://lore.kernel.org/r/20200217112706.20085-1-yi.zhang@huawei.com Fixes: c96dceea ("jbd2: do not clear the BH_Mapped flag when forgetting a metadata buffer") Suggested-by:
zhangyi (F) <yi.zhang@huawei.com> Signed-off-by:
-
Can Guo authored
commit c63d6099 upstream. The async version of ufshcd_hold(async == true), which is only called in queuecommand path as for now, is expected to work in atomic context, thus it should not sleep or schedule out. When it runs into the condition that clocks are ON but link is still in hibern8 state, it should bail out without flushing the clock ungate work. Fixes: f2a785ac ("scsi: ufshcd: Fix race between clk scaling and ungate work") Link: https://lore.kernel.org/r/1581392451-28743-6-git-send-email-cang@codeaurora.orgReviewed-by:
Hongwu Su <hongwus@codeaurora.org> Reviewed-by:
Asutosh Das <asutoshd@codeaurora.org> Reviewed-by:
Bean Huo <beanhuo@micron.com> Reviewed-by:
Stanley Chu <stanley.chu@mediatek.com> Signed-off-by:
Can Guo <cang@codeaurora.org> Signed-off-by:
-
Amir Goldstein authored
commit 300b124f upstream. Commit 6dde1e42 ("ovl: make i_ino consistent with st_ino in more cases"), relaxed the condition nfs_export=on in order to set the value of i_ino to xino map of real ino. Specifically, it also relaxed the pre-condition that index=on for consistent i_ino. This opened the corner case of lower hardlink in ovl_get_inode(), which calls ovl_fill_inode() with ino=0 and then ovl_init_inode() is called to set i_ino to lower real ino without the xino mapping. Pass the correct values of ino;fsid in this case to ovl_fill_inode(), so it can initialize i_ino correctly. Fixes: 6dde1e42 ("ovl: make i_ino consistent with st_ino in more ...") Signed-off-by:
Amir Goldstein <amir73il@gmail.com> Signed-off-by:
Miklos Szeredi <mszeredi@redhat.com> Signed-off-by:
-
