- 01 Oct, 2015 26 commits
-
-
Joe Perches authored
Correct misuse of 0x%d in logging message. Signed-off-by:
Joe Perches <joe@perches.com> Signed-off-by:
Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by:
Mauro Carvalho Chehab <mchehab@osg.samsung.com>
-
Andrzej Pietrasiewicz authored
Add Andrzej Pietrasiewicz and Jacek Anaszewski as maintainers of drivers/media/platform/s5p-jpeg. Signed-off-by:
Andrzej Pietrasiewicz <andrzej.p@samsung.com> Acked-by:
Jacek Anaszewski <j.anaszewski@samsung.com> Signed-off-by:
-
Andrzej Pietrasiewicz authored
JPEG IP found in Exynos5433 is similar to what is in Exynos4, but there are some subtle differences which this patch takes into account. The most important difference is in what is processed by the JPEG IP and what has to be provided to it. In case of 5433 the IP does not parse Huffman and quantisation tables, so this has to be performed with the CPU and the majority of the code in this patch does that. A small but important difference is in what address is passed to the JPEG IP. In case of 5433 it is the SOS (start of scan) position, which is natural, because the headers must be parsed elsewhere. There is also a difference in how the hardware is put to work in device_run. Data structures are extended as appropriate to accommodate the above changes. Signed-off-by:
-
Marek Szyprowski authored
Allow jpeg codec variants declare clocks they need. Before this patch is applied jpeg-core gets jpeg->sclk "speculatively": if it is not there, we assume no problem. This patch eliminates this by explicitly declaring what clocks are needed for each variant. This is a preparation for adding Exynos 5433 variant support, which needs 4 clocks of names not compatible with any previous version of jpeg hw module. [Rebase and commit message] Signed-off-by:
Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by:
-
Javier Martinez Canillas authored
The driver is using -1 instead of the -ENOMEM defined macro to specify that a buffer allocation failed. Since the error number is propagated, the caller will get a -EPERM which is the wrong error condition. Also, the smatch tool complains with the following warning: gen_mjpeghdr_to_package() warn: returning -1 instead of -ENOMEM is sloppy Signed-off-by:
Javier Martinez Canillas <javier@osg.samsung.com> Signed-off-by:
-
Javier Martinez Canillas authored
The SPI core always reports the MODALIAS uevent as "spi:<modalias>" regardless of the mechanism that was used to register the device (i.e: OF or board code) and the table that is used later to match the driver with the device (i.e: SPI id table or OF match table). So drivers needs to export the SPI id table and this be built into the module or udev won't have the necessary information to autoload the needed driver module when the device is added. But this means that OF-only drivers needs to have both OF and SPI id tables that have to be kept in sync and also the dev node compatible manufacturer prefix is stripped when reporting the MODALIAS. Which can lead to issues if two vendors use the same SPI device name for example. To avoid the above, the SPI core behavior may be changed in the future to not require an SPI device table for OF-only drivers and report the OF module alias. So, it's better to also export the OF table even when is unused now to prevent breaking module loading when the core changes. Signed-off-by:
Andrzej Hajda <a.hajda@samsung.com> Signed-off-by:
-
Hans Verkuil authored
- Add missing V4L2_CTRL_TYPE_U32 documentation - Remove 'which are actually different on the hardware' sentence which is confusing. I think the idea was to let the user know that the step can be different for different hardware, but that's obvious because otherwise you wouldn't need to specify the step value. - Clarify that V4L2_CTRL_COMPOUND_TYPES also applies to arrays. Signed-off-by:
-
Hans Verkuil authored
Array controls weren't skipped when only V4L2_CTRL_FLAG_NEXT_CTRL was provided (so no V4L2_CTRL_FLAG_NEXT_COMPOUND was set). This is wrong since arrays are also considered compound controls (i.e. with more than one value), and applications that do not know about arrays will not be able to handle such controls. Fix the test to include arrays. Signed-off-by:
Ricardo Ribalda Delgado <ricardo.ribalda@gmail.com> Cc: <stable@vger.kernel.org> # for v3.17 and up Signed-off-by:
-
Arnd Bergmann authored
This is a preparation for a change to the type of v4l2 timestamps. v4l2_get_timestamp() is a helper function that reads the monotonic time and stores it into a 'struct timeval'. Multiple drivers implement the same thing themselves for historic reasons. Changing them all to use v4l2_get_timestamp() is more consistent and reduces the amount of code duplication, and most importantly simplifies the following changes. Signed-off-by:
Arnd Bergmann <arnd@arndb.de> Acked-by:
Sylwester Nawrocki <s.nawrocki@samsung.com> [hans.verkuil@cisco.com: dropped the v4l2-dev.c patch that didn't belong here] Signed-off-by:
-
Arnd Bergmann authored
The exynos4 fimc capture driver claims to use monotonic timestamps but calls ktime_get_real_ts(). This is both an incorrect API use, and a bad idea because of the y2038 problem and the fact that the wall clock time is not reliable for timestamps across suspend or settimeofday(). This changes the driver to use the normal v4l2_get_timestamp() function like all other drivers. Signed-off-by:
-
Sergei Shtylyov authored
The driver was written with the 'soc_camera' use in mind, however the g_std() video method was forgotten. Implement it at last... Signed-off-by:
Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Signed-off-by:
-
Hans Verkuil authored
The vbi port should pass any tuner/input/standard information on to the video port since in the input and tuner are shared between the two. There is no reason to duplicate this code, just pass the ioctls on to the video encoder port. Signed-off-by:
-
Hans Verkuil authored
- the frequency range was never set - there was no initial frequency - missing index/tuner checks - inconsistent standard reporting - removed unnecessary tuner type checks (the core handles that) - clamp frequency to the valid frequency range as per the V4L2 spec Signed-off-by:
-
Hans Verkuil authored
This driver includes videobuf headers and selects VIDEOBUF_DVB, but videobuf isn't used at all. Remove this. Signed-off-by:
-
Hans Verkuil authored
Fix various v4l2-compliance issues in the formatting ioctls: - the vbi device implemented video format ioctls which make no senses for a vbi device, remove them. - remove the unused ts_packet_size and ts_packet_count fields. - fill in colorspace and field. - fill in sizeimage with a default value. - for the video node the get, set and try format functions all do the same thing, so combine into a single function. Signed-off-by:
-
Hans Verkuil authored
Now that saa7164 uses v4l2_fh and that poll() has been fixed, it is trivial to add support for control events. Signed-off-by:
-
Hans Verkuil authored
- poll doesn't return negative values, so you can't return -EINVAL. Instead return POLLERR. - poll can't be called if !video_is_registered(), so this test can be dropped. - poll can never do a blocking wait, so remove that check. - poll shouldn't attempt to start streaming if the caller isn't interested in read events. Signed-off-by:
-
Hans Verkuil authored
Control events require the use of struct v4l2_fh. Add this to saa7164. Signed-off-by:
-
Hans Verkuil authored
Convert this driver to the control framework. Note that the VBI device nodes have no controls as there is nothing to control. Signed-off-by:
-
Ricardo Ribalda authored
The next patches on the series need this modifications to pass clean checkpath.pl. Signed-off-by:
-
Ricardo Ribalda authored
Referenced file has moved Signed-off-by:
-
Hans Verkuil authored
Add support for 10 and 12 bit Bayer formats to the test pattern generator and the vivid driver. Signed-off-by:
-
Hans Verkuil authored
Add the missing support for v4l2_sdr_format (V4L2_BUF_TYPE_SDR_CAPTURE). Signed-off-by:
-
Geliang Tang authored
Fix the following 'make htmldocs' warnings: .//include/media/v4l2-dv-timings.h:147: warning: No description found for parameter 'frame_height' .//include/media/v4l2-dv-timings.h:147: warning: No description found for parameter 'hfreq' .//include/media/v4l2-dv-timings.h:147: warning: No description found for parameter 'vsync' .//include/media/v4l2-dv-timings.h:147: warning: No description found for parameter 'active_width' .//include/media/v4l2-dv-timings.h:147: warning: No description found for parameter 'polarities' .//include/media/v4l2-dv-timings.h:147: warning: No description found for parameter 'interlaced' .//include/media/v4l2-dv-timings.h:147: warning: No description found for parameter 'fmt' .//include/media/v4l2-dv-timings.h:171: warning: No description found for parameter 'frame_height' .//include/media/v4l2-dv-timings.h:171: warning: No description found for parameter 'hfreq' .//include/media/v4l2-dv-timings.h:171: warning: No description found for parameter 'vsync' .//include/media/v4l2-dv-timings.h:171: warning: No description found for parameter 'polarities' .//include/media/v4l2-dv-timings.h:171: warning: No description found for parameter 'interlaced' .//include/media/v4l2-dv-timings.h:171: warning: No description found for parameter 'aspect' .//include/media/v4l2-dv-timings.h:171: warning: No description found for parameter 'fmt' .//include/media/v4l2-dv-timings.h:184: warning: No description found for parameter 'hor_landscape' .//include/media/v4l2-dv-timings.h:184: warning: No description found for parameter 'vert_portrait' Signed-off-by:
Geliang Tang <geliangtang@163.com> Signed-off-by:
-
Hans Verkuil authored
Use a type-safe assignment instead of memcpy. And it is easier to read as well. Signed-off-by:
-
Hans Verkuil authored
Document this new transfer function used by High Dynamic Range content. Signed-off-by:
-
- 30 Sep, 2015 9 commits
-
-
Hans Verkuil authored
Support the new SMPTE 2084 transfer function in the vivid test driver. Signed-off-by:
-
Hans Verkuil authored
Support the new SMPTE 2084 transfer function in the test pattern generator. Signed-off-by:
-
Hans Verkuil authored
CEA-861.3 adds support for the SMPTE 2084 Electro-Optical Transfer Function as can be used in HDR displays. Add a define for this in videodev2.h. Signed-off-by:
-
Hans Verkuil authored
Support this new colorspace in vivid. Signed-off-by:
-
Hans Verkuil authored
Add support to the test pattern generator for the DCI-P3 colorspace. Signed-off-by:
-
Hans Verkuil authored
Document this colorspace. Signed-off-by:
-
Hans Verkuil authored
This colorspace is used for cinema projectors and is supported by the DisplayPort standard. Signed-off-by:
-
Hans Verkuil authored
The V4L2_COLORSPACE_470_SYSTEM_M (aka NTSC 1953) colorspace has a different whitepoint (C) compared to Rec. 709 (D65). The Bradford method is the recommended method to compensate for that when converting a Rec. 709 color to an NTSC 1953 color. See http://www.brucelindbloom.com/index.html?Eqn_ChromAdapt.html for more details on the Bradford method. This patch updates the Rec. 709 to NTSC 1953 matrix so that it includes the chromatic adaptation as calculated by the Bradford method, and it recalculates the tpg_csc_colors table accordingly. Signed-off-by:
-
Hans Verkuil authored
The max value of various menu controls is hardcoded, and it is easy to forget to update it after adding a new menu item. So use ARRAY_SIZE instead to calculate this value. Signed-off-by:
-
- 25 Sep, 2015 5 commits
-
-
Hans Verkuil authored
Every time compat32 encounters an unknown ioctl it will call pr_warn. However, that's very irritating since it is perfectly normal that this happens. For example, applications often try to call an ioctl to see if it exists, and if that's used with an older kernel where compat32 doesn't support that ioctl yet, then it starts spamming the kernel log. So replace pr_warn by pr_debug. Signed-off-by:
Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by:
-
Josh Wu authored
This patch will get the DT parameters of vsync/hsync/pixclock polarity, and pass to driver. Also add a debug information for test purpose. Signed-off-by:
Josh Wu <josh.wu@atmel.com> Reviewed-by:
Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by:
Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by:
-
Laurent Pinchart authored
The emb_crc_sync, mck_hz, asd and asd_sizes platform data fields are unused, remove them. Signed-off-by:
-
Laurent Pinchart authored
All in-tree users have migrated to DT, remove support for platform data. Signed-off-by:
-
Laurent Pinchart authored
Put the endpoint DT node earlier to avoid the need for goto statements to a cleanup code block in case of errors. Signed-off-by:
-
