integrity_kernel_read() returns the number of bytes read. If this is
a short read then this positive value is returned from
ima_calc_file_hash_atfm(). Currently this is only indirectly called from
ima_calc_file_hash() and this function only tests for the return value
being zero or nonzero and also doesn't forward the return value.
Nevertheless there's no point in returning a positive value as an error,
so translate a short read into -EINVAL.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>

If the IMA template contains the "modsig" or "d-modsig" field, then the
modsig should be added to the measurement list when the file is appraised.

And that is what normally happens, but if a measurement rule caused a file
containing a modsig to be measured before a different rule causes it to be
appraised, the resulting measurement entry will not contain the modsig
because it is only fetched during appraisal. When the appraisal rule
triggers, it won't store a new measurement containing the modsig because
the file was already measured.

We need to detect that situation and store an additional measurement with
the modsig. This is done by adding an IMA_MEASURE action flag if we read a
modsig and the IMA template contains a modsig field.
Suggested-by: Mimi Zohar <zohar@linux.ibm.com>
Signed-off-by: Thiago Jung Bauermann <bauerman@linux.ibm.com>
Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>

Define new "d-modsig" template field which holds the digest that is
expected to match the one contained in the modsig, and also new "modsig"
template field which holds the appended file signature.

Add a new "ima-modsig" defined template descriptor with the new fields as
well as the ones from the "ima-sig" descriptor.

Change ima_store_measurement() to accept a struct modsig * argument so that
it can be passed along to the templates via struct ima_event_data.
Suggested-by: Mimi Zohar <zohar@linux.ibm.com>
Signed-off-by: Thiago Jung Bauermann <bauerman@linux.ibm.com>
Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>

Obtain the modsig and calculate its corresponding hash in
ima_collect_measurement().
Signed-off-by: Thiago Jung Bauermann <bauerman@linux.ibm.com>
Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>

Implement the appraise_type=imasig|modsig option, allowing IMA to read and
verify modsig signatures.

In case a file has both an xattr signature and an appended modsig, IMA will
only use the appended signature if the key used by the xattr signature
isn't present in the IMA or platform keyring.

Because modsig verification needs to convert from an integrity keyring id
to the keyring itself, add an integrity_keyring_from_id() function in
digsig.c so that integrity_modsig_verify() can use it.
Signed-off-by: Thiago Jung Bauermann <bauerman@linux.ibm.com>
Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>

Verify xattr signature in a separate function so that the logic in
ima_appraise_measurement() remains clear when it gains the ability to also
verify an appended module signature.

The code in the switch statement is unchanged except for having to
dereference the status and cause variables (since they're now pointers),
and fixing the style of a block comment to appease checkpatch.
Suggested-by: Mimi Zohar <zohar@linux.ibm.com>
Signed-off-by: Thiago Jung Bauermann <bauerman@linux.ibm.com>
Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>

Introduce the modsig keyword to the IMA policy syntax to specify that
a given hook should expect the file to have the IMA signature appended
to it. Here is how it can be used in a rule:

appraise func=KEXEC_KERNEL_CHECK appraise_type=imasig|modsig

With this rule, IMA will accept either a signature stored in the extended
attribute or an appended signature.

For now, the rule above will behave exactly the same as if
appraise_type=imasig was specified. The actual modsig implementation
will be introduced separately.
Suggested-by: Mimi Zohar <zohar@linux.ibm.com>
Signed-off-by: Thiago Jung Bauermann <bauerman@linux.ibm.com>
Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>

This avoids a dependency cycle in soon-to-be-introduced
CONFIG_IMA_APPRAISE_MODSIG: it will select CONFIG_MODULE_SIG_FORMAT
which in turn selects CONFIG_KEYS. Kconfig then complains that
CONFIG_INTEGRITY_SIGNATURE depends on CONFIG_KEYS.
Signed-off-by: Thiago Jung Bauermann <bauerman@linux.ibm.com>
Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>

IMA will need to access the digest of the PKCS7 message (as calculated by
the kernel) before the signature is verified, so introduce
pkcs7_get_digest() for that purpose.

Also, modify pkcs7_digest() to detect when the digest was already
calculated so that it doesn't have to do redundant work. Verifying that
sinfo->sig->digest isn't NULL is sufficient because both places which
allocate sinfo->sig (pkcs7_parse_message() and pkcs7_note_signed_info())
use kzalloc() so sig->digest is always initialized to zero.
Signed-off-by: Thiago Jung Bauermann <bauerman@linux.ibm.com>
Reviewed-by: Mimi Zohar <zohar@linux.ibm.com>
Cc: David Howells <dhowells@redhat.com>
Cc: David Woodhouse <dwmw2@infradead.org>
Cc: Herbert Xu <herbert@gondor.apana.org.au>
Cc: "David S. Miller" <davem@davemloft.net>
Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>

IMA will need to verify a PKCS#7 signature which has already been parsed.
For this reason, factor out the code which does that from
verify_pkcs7_signature() into a new function which takes a struct
pkcs7_message instead of a data buffer.
Signed-off-by: Thiago Jung Bauermann <bauerman@linux.ibm.com>
Reviewed-by: Mimi Zohar <zohar@linux.ibm.com>
Cc: David Howells <dhowells@redhat.com>
Cc: David Woodhouse <dwmw2@infradead.org>
Cc: Herbert Xu <herbert@gondor.apana.org.au>
Cc: "David S. Miller" <davem@davemloft.net>
Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>

IMA will use the module_signature format for append signatures, so export
the relevant definitions and factor out the code which verifies that the
appended signature trailer is valid.

Also, create a CONFIG_MODULE_SIG_FORMAT option so that IMA can select it
and be able to use mod_check_sig() without having to depend on either
CONFIG_MODULE_SIG or CONFIG_MODULES.

s390 duplicated the definition of struct module_signature so now they can
use the new <linux/module_signature.h> header instead.
Signed-off-by: Thiago Jung Bauermann <bauerman@linux.ibm.com>
Acked-by: Jessica Yu <jeyu@kernel.org>
Reviewed-by: Philipp Rudo <prudo@linux.ibm.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>

IMA policy rules are walked sequentially.  Depending on the ordering of
the policy rules, the "template" field might be defined in one rule, but
will be replaced by subsequent, applicable rules, even if the rule does
not explicitly define the "template" field.

This patch initializes the "template" once and only replaces the
"template", when explicitly defined.

Fixes: 19453ce0 ("IMA: support for per policy rule template formats")
Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>

Pull structleak fix from Kees Cook:
 "Disable gcc-based stack variable auto-init under KASAN (Arnd
  Bergmann).

  This fixes a bunch of build warnings under KASAN and the
  gcc-plugin-based stack auto-initialization features (which are
  arguably redundant, so better to let KASAN control this)"

* tag 'meminit-v5.3-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux:
  structleak: disable STRUCTLEAK_BYREF in combination with KASAN_STACK

Merge tag 'kbuild-fixes-v5.3' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild

Pull Kbuild fixes from Masahiro Yamada:

 - add compile_commands.json to .gitignore

 - fix false-positive warning from gen_compile_commands.py after
   allnoconfig build

 - remove unused code

* tag 'kbuild-fixes-v5.3' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild:
  kbuild: remove unused single-used-m
  gen_compile_commands: lower the entry count threshold
  .gitignore: Add compilation database file
  kbuild: remove unused objectify macro

Pull char/misc driver fixes from Greg KH:
 "Here are some small char and misc driver fixes for 5.3-rc2 to resolve
  some reported issues.

  Nothing major at all, some binder bugfixes for issues found, some new
  mei device ids, firmware building warning fixes, habanalabs fixes, a
  few other build fixes, and a MAINTAINERS update.

  All of these have been in linux-next with no reported issues"

* tag 'char-misc-5.3-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc:
  test_firmware: fix a memory leak bug
  hpet: Fix division by zero in hpet_time_div()
  eeprom: make older eeprom drivers select NVMEM_SYSFS
  vmw_balloon: Remove Julien from the maintainers list
  fpga-manager: altera-ps-spi: Fix build error
  mei: me: add mule creek canyon (EHL) device ids
  binder: prevent transactions to context manager from its own process.
  binder: Set end of SG buffer area properly.
  firmware: Fix missing inline
  firmware: fix build errors in paged buffer handling code
  habanalabs: don't reset device when getting VRHOT
  habanalabs: use %pad for printing a dma_addr_t

Pull tty fixes from Greg KH:
 "Here are two tty/vt fixes:

   - delete the netx-serial driver as the arch has been removed, no need
     to keep the serial driver for it around either.

   - vt console_lock fix to resolve a reported noisy warning at runtime

  Both of these have been in linux-next with no reported issues"

* tag 'tty-5.3-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty:
  vt: Grab console_lock around con_is_bound in show_bind
  tty: serial: netx: Delete driver

Pull SPDX fixes from Greg KH:
 "Here are some small SPDX fixes for 5.3-rc2 for things that came in
  during the 5.3-rc1 merge window that we previously missed.

  Only three small patches here:

   - two uapi patches to resolve some SPDX tags that were not correct

   - fix an invalid SPDX tag in the iomap Makefile file

  All have been properly reviewed on the public mailing lists"

* tag 'spdx-5.3-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/spdx:
  iomap: fix Invalid License ID
  treewide: remove SPDX "WITH Linux-syscall-note" from kernel-space headers again
  treewide: add "WITH Linux-syscall-note" to SPDX tag of uapi headers

Pull USB fixes from Greg KH:
 "Here are some small fixes for 5.3-rc2. All of these resolve some
  reported issues, some more than others :)

  Included in here is:

   - xhci fix for an annoying issue with odd devices

   - reversion of some usb251xb patches that should not have been merged

   - usb pci quirk additions and fixups

   - usb storage fix

   - usb host controller error test fix

  All of these have been in linux-next with no reported issues"

* tag 'usb-5.3-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb:
  xhci: Fix crash if scatter gather is used with Immediate Data Transfer (IDT).
  usb: usb251xb: Reallow swap-dx-lanes to apply to the upstream port
  Revert "usb: usb251xb: Add US port lanes inversion property"
  Revert "usb: usb251xb: Add US lanes inversion dts-bindings"
  usb: wusbcore: fix unbalanced get/put cluster_id
  usb/hcd: Fix a NULL vs IS_ERR() bug in usb_hcd_setup_local_mem()
  usb-storage: Add a limitation for blk_queue_max_hw_sectors()
  usb: pci-quirks: Minor cleanup for AMD PLL quirk
  usb: pci-quirks: Correct AMD PLL quirk detection

Pull ARM SoC fixes from Olof Johansson:
 "Here's the first batch of fixes for this release cycle.

  Main diffstat here is the re-deletion of netx. I messed up and most
  likely didn't remove the files from the index when I test-merged this
  and saw conflicts, and from there on out 'git rerere' remembered the
  mistake and I missed checking it. Here it's done again as expected.

  Besides that:

   - A defconfig refresh + enabling of new drivers for u8500

   - i.MX fixlets for i2c/SAI/pinmux

   - sleep.S build fix for Davinci

   - Broadcom devicetree build/warning fix"

* tag 'armsoc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc:
  ARM: defconfig: u8500: Add new drivers
  ARM: defconfig: u8500: Refresh defconfig
  ARM: dts: bcm: bcm47094: add missing #cells for mdio-bus-mux
  ARM: davinci: fix sleep.S build error on ARMv4
  arm64: dts: imx8mq: fix SAI compatible
  arm64: dts: imx8mm: Correct SAI3 RXC/TXFS pin's mux option #1
  ARM: dts: imx6ul: fix clock frequency property name of I2C buses
  ARM: Delete netx a second time
  ARM: dts: imx7ulp: Fix usb-phy unit address format

Pull x86 fixes from Thomas Gleixner:
 "A set of x86 fixes and functional updates:

   - Prevent stale huge I/O TLB mappings on 32bit. A long standing bug
     which got exposed by KPTI support for 32bit

   - Prevent bogus access_ok() warnings in arch_stack_walk_user()

   - Add display quirks for Lenovo devices which have height and width
     swapped

   - Add the missing CR2 fixup for 32 bit async pagefaults. Fallout of
     the CR2 bug fix series.

   - Unbreak handling of force enabled HPET by moving the 'is HPET
     counting' check back to the original place.

   - A more accurate check for running on a hypervisor platform in the
     MDS mitigation code. Not perfect, but more accurate than the
     previous one.

   - Update a stale and confusing comment vs. IRQ stacks"

* 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/speculation/mds: Apply more accurate check on hypervisor platform
  x86/hpet: Undo the early counter is counting check
  x86/entry/32: Pass cr2 to do_async_page_fault()
  x86/irq/64: Update stale comment
  x86/sysfb_efi: Add quirks for some devices with swapped width and height
  x86/stacktrace: Prevent access_ok() warnings in arch_stack_walk_user()
  mm/vmalloc: Sync unmappings in __purge_vmap_area_lazy()
  x86/mm: Sync also unmappings in vmalloc_sync_all()
  x86/mm: Check for pfn instead of page in vmalloc_sync_one()

Pull scheduler fixes from Thomas Gleixner:
 "Two fixes for the fair scheduling class:

   - Prevent freeing memory which is accessible by concurrent readers

   - Make the RCU annotations for numa groups consistent"

* 'sched-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  sched/fair: Use RCU accessors consistently for ->numa_group
  sched/fair: Don't free p->numa_faults with concurrent readers

Pull perf fixes from Thomas Gleixner:
 "A pile of perf related fixes:

  Kernel:
   - Fix SLOTS PEBS event constraints for Icelake CPUs

   - Add the missing mask bit to allow counting hardware generated
     prefetches on L3 for Icelake CPUs

   - Make the test for hypervisor platforms more accurate (as far as
     possible)

   - Handle PMUs correctly which override event->cpu

   - Yet another missing fallthrough annotation

  Tools:
     perf.data:
        - Fix loading of compressed data split across adjacent records
        - Fix buffer size setting for processing CPU topology perf.data
          header.

     perf stat:
        - Fix segfault for event group in repeat mode
        - Always separate "stalled cycles per insn" line, it was being
          appended to the "instructions" line.

     perf script:
        - Fix --max-blocks man page description.
        - Improve man page description of metrics.
        - Fix off by one in brstackinsn IPC computation.

     perf probe:
        - Avoid calling freeing routine multiple times for same pointer.

     perf build:
        - Do not use -Wshadow on gcc < 4.8, avoiding too strict warnings
          treated as errors, breaking the build"

* 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  perf/x86/intel: Mark expected switch fall-throughs
  perf/core: Fix creating kernel counters for PMUs that override event->cpu
  perf/x86: Apply more accurate check on hypervisor platform
  perf/x86/intel: Fix invalid Bit 13 for Icelake MSR_OFFCORE_RSP_x register
  perf/x86/intel: Fix SLOTS PEBS event constraint
  perf build: Do not use -Wshadow on gcc < 4.8
  perf probe: Avoid calling freeing routine multiple times for same pointer
  perf probe: Set pev->nargs to zero after freeing pev->args entries
  perf session: Fix loading of compressed data split across adjacent records
  perf stat: Always separate stalled cycles per insn
  perf stat: Fix segfault for event group in repeat mode
  perf tools: Fix proper buffer size for feature processing
  perf script: Fix off by one in brstackinsn IPC computation
  perf script: Improve man page description of metrics
  perf script: Fix --max-blocks man page description

Pull locking fixes from Thomas Gleixner:
 "A set of locking fixes:

   - Address the fallout of the rwsem rework. Missing ACQUIREs and a
     sanity check to prevent a use-after-free

   - Add missing checks for unitialized mutexes when mutex debugging is
     enabled.

   - Remove the bogus code in the generic SMP variant of
     arch_futex_atomic_op_inuser()

   - Fixup the #ifdeffery in lockdep to prevent compile warnings"

* 'locking-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  locking/mutex: Test for initialized mutex
  locking/lockdep: Clean up #ifdef checks
  locking/lockdep: Hide unused 'class' variable
  locking/rwsem: Add ACQUIRE comments
  tty/ldsem, locking/rwsem: Add missing ACQUIRE to read_failed sleep loop
  lcoking/rwsem: Add missing ACQUIRE to read_slowpath sleep loop
  locking/rwsem: Add missing ACQUIRE to read_slowpath exit when queue is empty
  locking/rwsem: Don't call owner_on_cpu() on read-owner
  futex: Cleanup generic SMP variant of arch_futex_atomic_op_inuser()

Pull objtool fix from Thomas Gleixner:
 "A single robustness fix for objtool to handle unbalanced CLAC
  invocations under all circumstances"

* 'core-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  objtool: Improve UACCESS coverage

Merge tag 'Wimplicit-fallthrough-5.3-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gustavoars/linux

Pull Wimplicit-fallthrough enablement from Gustavo A. R. Silva:
 "This marks switch cases where we are expecting to fall through, and
  globally enables the -Wimplicit-fallthrough option in the main
  Makefile.

  Finally, some missing-break fixes that have been tagged for -stable:

   - drm/amdkfd: Fix missing break in switch statement

   - drm/amdgpu/gfx10: Fix missing break in switch statement

  With these changes, we completely get rid of all the fall-through
  warnings in the kernel"

* tag 'Wimplicit-fallthrough-5.3-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gustavoars/linux:
  Makefile: Globally enable fall-through warning
  drm/i915: Mark expected switch fall-throughs
  drm/amd/display: Mark expected switch fall-throughs
  drm/amdkfd/kfd_mqd_manager_v10: Avoid fall-through warning
  drm/amdgpu/gfx10: Fix missing break in switch statement
  drm/amdkfd: Fix missing break in switch statement
  perf/x86/intel: Mark expected switch fall-throughs
  mtd: onenand_base: Mark expected switch fall-through
  afs: fsclient: Mark expected switch fall-throughs
  afs: yfsclient: Mark expected switch fall-throughs
  can: mark expected switch fall-throughs
  firewire: mark expected switch fall-throughs

Pull s390 updates from Heiko Carstens:

 - Add ABI to kernel image file which allows e.g. the file utility to
   figure out the kernel version.

 - Wire up clone3 system call.

 - Add support for kasan bitops instrumentation.

 - uapi header cleanup: use __u{16,32,64} instead of uint{16,32,64}_t.

 - Provide proper ARCH_ZONE_DMA_BITS so the s390 DMA zone is correctly
   defined with 2 GB instead of the default value of 1 MB.

 - Farhan Ali leaves the group of vfio-ccw maintainers.

 - Various small vfio-ccw fixes.

 - Add missing locking for airq_areas array in virtio code.

 - Minor qdio improvements.

* tag 's390-5.3-3' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux:
  MAINTAINERS: vfio-ccw: Remove myself as the maintainer
  s390/mm: use shared variables for sysctl range check
  virtio/s390: fix race on airq_areas[]
  s390/dma: provide proper ARCH_ZONE_DMA_BITS value
  s390/kasan: add bitops instrumentation
  s390/bitops: make test functions return bool
  s390: wire up clone3 system call
  kbuild: enable arch/s390/include/uapi/asm/zcrypt.h for uapi header test
  s390: use __u{16,32,64} instead of uint{16,32,64}_t in uapi header
  s390/hypfs: fix a typo in the name of a function
  s390/qdio: restrict QAOB usage to IQD unicast queues
  s390/qdio: add sanity checks to the fast-requeue path
  s390: enable detection of kernel version from bzImage
  Documentation: fix vfio-ccw doc
  vfio-ccw: Update documentation for csch/hsch
  vfio-ccw: Don't call cp_free if we are processing a channel program
  vfio-ccw: Set pa_nr to 0 if memory allocation fails for pa_iova_pfn
  vfio-ccw: Fix memory leak and don't call cp_free in cp_init
  vfio-ccw: Fix misleading comment when setting orb.cmd.c64

Pull Devicetree fixes from Rob Herring:
 "The nvmem changes would typically go thru Greg's tree, but they were
  missed in the merge window. [ Acked by Greg ]

  Summary:

   - Fix mismatches in $id values and actual filenames. Now checked by
     tools.

   - Convert nvmem binding to DT schema

   - Fix a typo in of_property_read_bool() kerneldoc

   - Remove some redundant description in al-fic interrupt-controller"

* tag 'devicetree-fixes-for-5.3-2' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux:
  dt-bindings: Fix more $id value mismatches filenames
  dt-bindings: nvmem: SID: Fix the examples node names
  dt-bindings: nvmem: Add YAML schemas for the generic NVMEM bindings
  of: Fix typo in kerneldoc
  dt-bindings: interrupt-controller: al-fic: remove redundant binding
  dt-bindings: clk: allwinner,sun4i-a10-ccu: Correct path in $id

Pull libnvdimm fixes from Dan Williams:
 "A collection of locking and async operations fixes for v5.3-rc2. These
  had been soaking in a branch targeting the merge window, but missed
  due to a regression hunt. This fixed up version has otherwise been in
  -next this past week with no reported issues.

  In order to gain confidence in the locking changes the pull also
  includes a debug / instrumentation patch to enable lockdep coverage
  for libnvdimm subsystem operations that depend on the device_lock for
  exclusion. As mentioned in the changelog it is a hack, but it works
  and documents the locking expectations of the sub-system in a way that
  others can use lockdep to verify. The driver core touches got an ack
  from Greg.

  Summary:

   - Fix duplicate device_unregister() calls (multiple threads competing
     to do unregister work when scheduling device removal from a sysfs
     attribute of the self-same device).

   - Fix badblocks registration order bug. Ensure region badblocks are
     initialized in advance of namespace registration.

   - Fix a deadlock between the bus lock and probe operations.

   - Export device-core infrastructure to coordinate async operations
     via the device ->dead state.

   - Add device-core infrastructure to validate device_lock() usage with
     lockdep"

* tag 'libnvdimm-fixes-5.3-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm:
  driver-core, libnvdimm: Let device subsystems add local lockdep coverage
  libnvdimm/bus: Fix wait_nvdimm_bus_probe_idle() ABBA deadlock
  libnvdimm/bus: Stop holding nvdimm_bus_list_mutex over __nd_ioctl()
  libnvdimm/bus: Prepare the nd_ioctl() path to be re-entrant
  libnvdimm/region: Register badblocks before namespaces
  libnvdimm/bus: Prevent duplicate device_unregister() calls
  drivers/base: Introduce kill_device()

This is unused since commit 9f69a496 ("kbuild: split out *.mod out
of {single,multi}-used-m rules").
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>

Running gen_compile_commands.py after building the kernel with
allnoconfig gave this:

$ ./scripts/gen_compile_commands.py
WARNING: Found 449 entries. Have you compiled the kernel?
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>

This file is used by clangd to use language server protocol.
It can be generated at each compile using scripts/gen_compile_commands.py.
Therefore it is different depending on the environment and should be
ignored.
Signed-off-by: Toru Komatsu <k0ma@utam0k.jp>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>

Commit 415008af ("docs-rst: convert lsm from DocBook to ReST")
removed the last users of this macro.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>

Pull block DMA segment fix from Jens Axboe:
 "Here's the virtual boundary segment size fix"

* tag 'for-linus-20190726-2' of git://git.kernel.dk/linux-block:
  block: fix max segment size handling in blk_queue_virt_boundary

Pull selinux fix from Paul Moore:
 "One small SELinux patch to add some proper bounds/overflow checking
  when adding a new sid/secid"

* tag 'selinux-pr-20190726' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/selinux:
  selinux: check sidtab limit before adding a new entry

The path in the schema '$id' values are wrong. Fix them.
Signed-off-by: Rob Herring <robh@kernel.org>

Now that the examples are validated, the examples in the SID binding
generates an error since the node names aren't one of the valid ones.

Let's switch for one that is ok.
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
Signed-off-by: Rob Herring <robh@kernel.org>

The nvmem providers and consumers have a bunch of generic properties that
are needed in a device tree. Add a YAML schemas for those.
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
[Srini: Changed licence to (GPL-2.0 OR BSD-2-Clause)]
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Signed-off-by: Rob Herring <robh@kernel.org>

"Findfrom" is not a word. Replace the function synopsis by something
that makes sense.
Signed-off-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Rob Herring <robh@kernel.org>

Pull SCSI fixes from James Bottomley:
 "Nine fixes: The most important core one is the dma_max_mapping_size
  fix that corrects the boot problem Gunter Roeck was having. A couple
  of other driver only fixes are significant, like the cxgbi selector
  support addition, the alua 2 second delay and the fdomain build fix"

* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
  scsi: scsi_dh_alua: always use a 2 second delay before retrying RTPG
  scsi: ibmvfc: fix WARN_ON during event pool release
  scsi: fcoe: fix a typo
  scsi: megaraid_sas: Make some functions static
  scsi: megaraid_sas: fix panic on loading firmware crashdump
  scsi: megaraid_sas: fix spelling mistake "megarid_sas" -> "megaraid_sas"
  scsi: core: fix the dma_max_mapping_size call
  scsi: fdomain: fix building pcmcia front-end
  scsi: target: cxgbit: add support for IEEE_8021QAZ_APP_SEL_STREAM selector