- 30 Nov, 2018 20 commits
-
-
Olof Johansson authored
Merge tag 'amlogic-dt64' of https://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-amlogic into next/dt arm64: Amlogic DT updates for v4.21 Some highlights: - new boards: Phicomm N1 (S905D), Libretech S805-AC - fixes for pinmux pad bias, GPIO line names - AXG: enable SCPI, add secure monitor * tag 'amlogic-dt64' of https://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-amlogic: (26 commits) arm64: dts: meson-gx: Add Internal Clock Measurer node arm64: dts: amlogic: Add all CPUs in cooling maps arm64: dts: meson: add libretech aml-s805x-ac board dt-bindings: arm: amlogic: add libretech aml-s805x-ac bindings dt-bindings: arm: amlogic: Add Phicomm N1 dt-bindings: Add vendor prefix for PHICOMM Co., Ltd. arm64: dts: meson-gxl: add support for phicomm n1 arm64: dts: meson: consistently disable pin bias arm64: dts: meson: disable pad bias for mmc pinmuxes arm64: dts: meson: remove extra subnode in mmc clk_gate pinmux arm64: dts: meson: s400: add bcm bluetooth device arm64: dts: meson: p230: disable advertisement EEE for GbE. arm64: dts: meson-axg: enable SCPI Documentation: bindings: Add missing Amlogic SCPI sensor bindings arm64: dts: meson-axg: correct sram shared mem unit-address arm64: dts: meson-axg: fix mailbox address arm64: dts: meson-gx: Add hdmi_5v regulator as hdmi tx supply arm64: dts: meson-axg: add secure monitor arm64: dts: meson-axg: s400: add cts-rts to the bluetooth uart arm64: dts: meson-gxl-khadas-vim: fix GPIO lines names ... Signed-off-by:
Olof Johansson <olof@lixom.net>
-
Olof Johansson authored
Merge tag 'amlogic-dt' of https://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-amlogic into next/dt Amlogic 32-bit DT updates for v4.21 - support more timers on meson8 - add the stdout-path property on several boards * tag 'amlogic-dt' of https://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-amlogic: ARM: dts: meson: add the clock inputs for the Meson timer ARM: dts: meson: add the TIMER B/C/D interrupts ARM: dts: meson: consistently disable pin bias ARM: dts: meson8b: mxq: add the /chosen/stdout-path property ARM: dts: meson8: minix-neo-x8: add the /chosen/stdout-path property ARM: dts: meson6: atv1200: add the /chosen/stdout-path property dt-bindings: timer: meson6_timer: document the clock inputs dt-bindings: timer: meson6_timer: document all interrupts Signed-off-by:
-
Olof Johansson authored
Merge tag 'omap-for-v4.21/dt-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into next/dt Device tree changes for omaps for v4.21 merge window These changes mostly configure pinctrl for am437x-gp-evm. There is also non-critical fix for a comment for Clang, and we enable earlycon for am3517-evm. * tag 'omap-for-v4.21/dt-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: ARM: dts: am437x-gp-evm: Add sleep state for beeper pins ARM: dts: am437x-gp-evm: Add pinmux for gpio0 wake ARM: dts: am437x-gp-evm: Add uart0 pinctrl default and sleep states ARM: dts: am437x-gp-evm: Add pinctrl for debugss pins ARM: dts: am437x-gp-evm: Add pinctrl for unused_pins ARM: dts: am437x-gp-evm: Add state for ddr3 vtt toggle pin ARM: dts: am3517-evm: Enable earlycon stdout path ARM: dts: omap3-gta04: Fix comment block Signed-off-by:
-
Olof Johansson authored
Merge tag 'vexpress-drm-arm-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-integrator into next/dt Versatile Express DTS update for DRM: This updates the Versatile Express family DTS files to contain the correct and detailed information required for the PL11x DRM driver to work properly. * tag 'vexpress-drm-arm-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-integrator: ARM: dts: Modernize the Vexpress PL111 integration Signed-off-by:
-
Lubomir Rintel authored
Despite Marvel keeps their base addresses secret there's a good chance they're actually correct. SSP1 and SSP3 bases were taken from OLPC 1.75: OpenFirmware and kernel respectively. SSP2 and SSP4 addresses are from James Cameron who actually has a copy of the data sheet. Signed-off-by:
Lubomir Rintel <lkundrak@v3.sk> Acked-by:
Pavel Machek <pavel@ucw.cz> Signed-off-by:
-
Lubomir Rintel authored
Signed-off-by:
-
Lubomir Rintel authored
The USB OTG PHY chip. To be used by the OTG controller. Signed-off-by:
-
Lubomir Rintel authored
I've gotten the base addresses, clocks and interrupts from an rusty and old out-of-tree driver. I haven't actually checked against the datasheet, since that one is reserved for the Marvell inner circle. Tested with an accelerometer on TWSI6 on an OLPC XO 1.75 machine. Signed-off-by:
-
Lubomir Rintel authored
Marvell keeps their MMP2 datasheet secret, but there are good clues that TWSI2 is not on 0xd4025000 on that platform, not does it use IRQ 58. In fact, the IRQ 58 on MMP2 seems to be a signal processor: arch/arm/mach-mmp/irqs.h:#define IRQ_MMP2_MSP 58 I'm taking a somewhat educated guess that is probably a copy & paste error from PXA168 or PXA910 and that the real controller in fact hides at address 0xd4031000 and uses an interrupt line multiplexed via IRQ 17. I'm also copying some properties from TWSI1 that were missing or incorrect. Tested on a OLPC XO 1.75 machine, where the RTC is on TWSI2. Signed-off-by:
-
Lubomir Rintel authored
There's apparently four of them on a MMP2. Signed-off-by:
-
Lubomir Rintel authored
The timer needs the timer clock to be enabled, otherwise it stops ticking. Signed-off-by:
-
Lubomir Rintel authored
This will be useful for boards that actually use GPIO pins. Signed-off-by:
-
Lubomir Rintel authored
gpio-pxa uses two cell to encode the interrupt source: the pin number and the trigger type. Adjust the device node accordingly. Signed-off-by:
-
Lubomir Rintel authored
The timer needs the timer clock to be enabled, otherwise it stops ticking. Signed-off-by:
Rob Herring <robh@kernel.org> Acked-by:
-
Olof Johansson authored
Merge tag 'socfpga_dts_updates_for_v5.0' of git://git.kernel.org/pub/scm/linux/kernel/git/dinguyen/linux into next/dt SoCFPGA DTS updates for v5.0 - Use SPDX license identifier for all SoCFPGA DTS files. - Remove dma-mask property as it has been deprecated. - Use tabs in DTS files. - Use the specific "altr,stratix10-rst-mgr" property for the Stratix10 reset manager. * tag 'socfpga_dts_updates_for_v5.0' of git://git.kernel.org/pub/scm/linux/kernel/git/dinguyen/linux: arm64: dts: stratix10: use "altr,stratix10-rst-mgr" binding ARM: dts: socfpga: use tabs for indentation arm: dts: socfpga: remove dma-mask property arm: dts: socfpga*.dts*: use SPDX-License-Identifier Signed-off-by:
-
Olof Johansson authored
Merge tag 'renesas-arm64-dt-for-v4.21' of https://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas into next/dt Renesas ARM64 Based SoC DT Updates for v4.21 * H3 (r8a7795) SoC: - Remove unneeded sound #address/size-cells * M3-W (r8a7796) SoC: - Describe CMT (Compare Match Timer) devices in DT - Describe I2C-DVFS device node in DT * M3-N (r8a77965) SoC: - Describe CAN, CANFD and LVDS in DT * R-Car H3 (r8a7795) and M3-W (r8a7796) SoCs: - Describe CPU topology, capacity and cooling maps in DT - Add SSIU support to R-Car audio * R-Car H3 (r8a7795), M3-W (r8a7796) and M3-N (r8a77965) SoCs: - Extend register range of HSUSB device to match documentation * R-Car H3 (r8a7795), M3-W (r8a7796) and M3-N (r8a77965) based Salvator-X, Salvator-XS and ULCB boards: - Switch eMMC bus to 1V8 * R-Car H3 (r8a7795), M3-W (r8a7796) and M3-N (r8a77965) based Salvator-X and Salvator-XS boards: - Describe USB3.0 xHCI host and prerepheral devices as companions * R-Car E3 (r8a77990) SoC: - Add thermal support - Add support for interupt controller for external devices (INTC-EX) - Describe all SCIF devices and SYS-DMA for I2C and MSIOF devices * R-Car E3 (r8a77990) based Ebisu board: - Enable SDHI, CAN, CANFD, audio and USB3.0 - Describe serial console pins * R-Car E3 (r8a77990) based Ebisu and R-Car D3 (r8a77995) based Draak board: - Enable USB2.0 peripheral device * R-Car M3-N (r8a77965), E3 (r8a77990) and V3H (r8a77980) SoCs: - Connect EtherAVB to IPMMU * R-Car V3M (r8a77970) and V3H (r8a77980) SoCs: - Describe TMU (timer unit), PWM timer controller and MSIOF devides in DT - Add thermal support * RZ/G2M (r8a774a1) SoC: - Use clock and power index macros - Describe VIN, CSI-2 and CAN devices in DT * tag 'renesas-arm64-dt-for-v4.21' of https://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas: (40 commits) arm64: dts: renesas: Add all CPUs in cooling maps arm64: dts: renesas: r8a77990: add thermal device support arm64: dts: renesas: r8a77990: Enable I2C DMA arm64: dts: renesas: r8a7796: Add CMT device nodes arm64: dts: renesas: r8a7796: add SSIU support for sound arm64: dts: renesas: r8a77990: Add I2C-DVFS device node arm64: dts: renesas: r8a77990: ebisu: Add and enable CAN,FD device nodes arm64: dts: renesas: r8a77965: Add CAN and CANFD controller nodes arm64: dts: renesas: r8a77990: ebisu: Add and enable PCIe device node arm64: dts: renesas: Add CPU capacity-dmips-mhz arm64: dts: renesas: Add CPU topology on R-Car Gen3 SoCs arm64: dts: renesas: r8a774a1: Replace clock magic numbers arm64: dts: renesas: r8a774a1: Replace power magic numbers arm64: dts: renesas: r8a7795: add SSIU support for sound arm64: dts: renesas: r8a77990: Fix VIN endpoint numbering arm64: dts: renesas: ebisu: Add and enable SDHI device nodes arm64: dts: renesas: ebisu: Add serial console pins arm64: dts: renesas: Switch eMMC bus to 1V8 on Salvator-X and ULCB arm64: dts: renesas: r8a77990: Add all HSCIF nodes arm64: dts: renesas: r8a779{7|8}0: add TMU support ... Signed-off-by:
-
Olof Johansson authored
Merge tag 'renesas-arm-dt-for-v4.21' of https://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas into next/dt Renesas ARM Based SoC DT Updates for v4.21 * RZ/N1D (r9a06g032) SoC: - Correct GIC DT node name - Enable pin controller * RZ/G1C (r8a77470) iWave g23S single board computer - Add QSPI flash support - Add pinctl support for EtherAVB - Enable CMT0 (Renesas R-Car Compare Match Timer) - Enable RWDT (Renesas Watchdog Timer) - Enable uSD and eMMC support * RZ/G1C (r8a77470) SoC: - Describe USB-DMAC and I2C devices in DT * R-Mobile A1 (r8a7740), Emma Mobile EV2 (emev2) and SH-Mobile AG5 (sh72a0) SoCs: - Include SoC name in DTSI * R-Car H2 (r8a7790) based lager, and R-Car M2-W (r8a7791) based koelsch and porter boards: - Disable unconnected LVDS encoders * tag 'renesas-arm-dt-for-v4.21' of https://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas: ARM: dts: r9a06g032: Correct the GIC DT node name ARM: dts: iwg23s-sbc: Add QSPI flash support ARM: dts: r8a77470: Add QSPI support ARM: dts: iwg23s-sbc: Add pinctl support for EtherAVB ARM: dts: iwg23s-sbc: Enable cmt0 ARM: dts: r8a77470: Add CMT SoC specific support ARM: dts: r8a77470: Add USB-DMAC device nodes ARM: dts: iwg23s-sbc: Enable watchdog support ARM: dts: r8a77470: Add watchdog support to SoC dtsi ARM: dts: r8a7740, emev2, sh73a0: Include SoC name in DTSI ARM: dts: r8a779[01]: Disable unconnected LVDS encoders ARM: dts: iwg23s-sbc: Add uSD and eMMC support ARM: dts: r8a77470: Add SDHI1 support ARM: dts: r8a77470: Add SDHI0 support ARM: dts: r8a77470: Add I2C[0123] support ARM: dts: r9a06g032: Add pinctrl node Signed-off-by:
-
Olof Johansson authored
Merge tag 'v4.21-rockchip-dts64-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into next/dt New dts for Gru-Scarlet (tablet device), default backlight brightness for all Gru devices, rk3399 spi dma properties, some improvements for the rk3399-sapphire board (fan, chosen, backlight), hs200 mode for the emmc on the rock64 and declaring all cpu cores in the cooling maps instead of just cpu0. * tag 'v4.21-rockchip-dts64-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip: arm64: dts: rockchip: Add all CPUs in cooling maps arm64: dts: rockchip: add Gru Scarlet devicetrees arm64: dts: rockchip: move backlight from rk3399 sapphire to excavator arm64: dts: rockchip: Use default brightness table for rk3399-gru arm64: dts: rockchip: add chosen node on rk3399-sapphire arm64: dts: rockchip: enable HS200 for eMMC on rock64 arm64: dts: rockchip: add fan on rk3399-sapphire board arm64: dts: rockchip: add rk3399 SPI DMAs Signed-off-by:
-
Olof Johansson authored
Merge tag 'v4.21-rockchip-dts32-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into next/dt Powerdomain and QoS nodes for rk3066 and rk3188. A fix for a rock2 regulator name and referencing all cpus in the cooling maps instead of only cpu0. * tag 'v4.21-rockchip-dts32-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip: ARM: dts: rockchip: Add all CPUs in cooling maps ARM: dts: rockchip: Fix rk3288-rock2 vcc_flash name ARM: dts: rockchip: add rk3066/rk3188 power-domains ARM: dts: rockchip: add qos nodes found on rk3066 and rk3188 dt-bindings: add power-domain header for RK3066 SoCs dt-bindings: add power-domain header for RK3188 SoCs Signed-off-by:
-
Olof Johansson authored
Merge tag 'vexpress-updates-4.20' of git://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux into next/dt ARMv7 Vexpress updates for v4.20 Single patch to use updated coresight graph bindings thereby removing loads of dtc warnings * tag 'vexpress-updates-4.20' of git://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux: ARM: dts: vexpress/TC2: Update entries to match latest coresight bindings Signed-off-by:
-
- 29 Nov, 2018 20 commits
-
-
Neil Armstrong authored
The Amlogic Meson GX SoCs embeds a clock measurer IP to measure the internal clock paths frequencies. This patch adds the node in the top-level meson-gx dtsi. Signed-off-by:
Neil Armstrong <narmstrong@baylibre.com> Acked-by:
Martin Blumenstingl <martin.blumenstingl@googlemail.com> Signed-off-by:
Kevin Hilman <khilman@baylibre.com>
-
Viresh Kumar authored
Each CPU can (and does) participate in cooling down the system but the DT only captures a handful of them, normally CPU0, in the cooling maps. Things work by chance currently as under normal circumstances its the first CPU of each cluster which is used by the operating systems to probe the cooling devices. But as soon as this CPU ordering changes and any other CPU is used to bring up the cooling device, we will start seeing failures. Also the DT is rather incomplete when we list only one CPU in the cooling maps, as the hardware doesn't have any such limitations. Update cooling maps to include all devices affected by individual trip points. Signed-off-by:
Viresh Kumar <viresh.kumar@linaro.org> Acked-by:
-
Neil Armstrong authored
Add Libretech aml-s805x-ac board (aka 'La Frite') support Signed-off-by:
Jerome Brunet <jbrunet@baylibre.com> Reviewed-by:
Peter Korsgaard <peter@korsgaard.com> Signed-off-by:
-
Jerome Brunet authored
Add bindings for the Libretech aml-s805x-ac board, aka 'La Frite'. Signed-off-by:
-
He Yangxuan authored
Add bindings documentation for the Phicomm N1. Signed-off-by:
He Yangxuan <yangxuan8282@gmail.com> Reviewed-by:
-
He Yangxuan authored
PHICOMM Co., Ltd. is a hardware provider headquartered in Shanghai, it's product includes router and smart devices. Signed-off-by:
-
He Yangxuan authored
This patch adds support for the Phicomm N1. This device based on P230 reference design. And this box doesn't have cvbs, so disable related section in device tree. Signed-off-by:
-
Jerome Brunet authored
On Amlogic chipsets, the bias set through pinconf applies to the pad itself, not only the GPIO function. This means that even when we change the function of the pad from GPIO to anything else, the bias previously set still applies. As we have seen with the eMMC, depending on the bias type and the function, it may trigger problems. The underlying issue is that we inherit whatever was left by previous user of the pad (pinconf, u-boot or the ROM code). As a consequence, the actual setup we will get is undefined. There is nothing mentioned in the documentation about pad bias and pinmux function, however leaving it undefined is not an option. This change consistently disable the pad bias for every pinmux functions. It seems to work well, we can only assume that the necessary bias (if any) is already provided by the pin function itself. Signed-off-by:
-
Jerome Brunet authored
In some cases (such as a boot from SPI) the bootloader or the ROM code may leave a bias pull-down on the mmc pins. If so the MMC will fail during the initialisation. Explicitly disabling the pinmux solves the problem. Signed-off-by:
-
Jerome Brunet authored
In the pinmux of the mmc clk_gate nodes, we define 2 subnodes. One for the function definition, the other for the bias. This is not necessary since we can define the function and the bias in the same subnode. Signed-off-by:
-
Jerome Brunet authored
Add broadcom bluetooth device on the s400 Signed-off-by:
-
He Yangxuan authored
This patch disable EEE advertisement for P230 board (DWMAC + RTL8211F). If not disable it, the network connection is not stable, will got issues like throughput drop or broken link. Signed-off-by:
-
Jerome Brunet authored
Enable SCPI on the axg platform, with cpu clock and hwmon (core temperature) support Signed-off-by:
-
Jerome Brunet authored
amlogic,meson-gxbb-scpi-sensors is both the driver and DT but is not documented. Just add it to amlogic's scpi documentation Signed-off-by:
-
Jerome Brunet authored
Correct the unit-address in the node name of the SRAM shared memory Signed-off-by:
-
Jerome Brunet authored
MHU mailbox address is wrong. Fixing it enables the mailboxes on the A113. These mailboxes are needed for SCPI Fixes: 9d59b708 ("arm64: dts: meson-axg: add initial A113D SoC DT support") Signed-off-by:
-
Neil Armstrong authored
The hdmi_5v regulator must be enabled to provide power to the physical HDMI PHY and enables the HDMI 5V presence loopback for the monitor. Fixes: b409f625 ("ARM64: dts: meson-gx: Add HDMI_5V regulator on selected boards") Signed-off-by:
-
Jerome Brunet authored
Add the secure monitor device to the axg platform. With this, we can read the SoC serial number. Signed-off-by:
-
Jerome Brunet authored
The uart used with bluetooth chipset on the s400 has flow control available. Let's enable it. Signed-off-by:
-
Neil Armstrong authored
The gpio line names were set in the pinctrl node instead of the gpio node, at the time it was merged, it worked, but was obviously wrong. This patch moves the properties to the gpio nodes. Fixes: 60795933 ("ARM64: dts: meson-gxl-khadas-vim: Add GPIO lines names") Signed-off-by:
-
