We've had several complaints about a 10s reconnect delay (the default)
when there was an error while there is connectivity to a subsystem.
The max_reconnects and reconnect_delay are set in common code prior to
calling the transport to create the controller.

This change checks if the default reconnect delay is being used, and if
so, it adjusts it to a shorter period (2s) for the nvme-fc transport.
It does so by calculating the controller loss tmo window, changing the
value of the reconnect delay, and then recalculating the maximum number
of reconnect attempts allowed.
Signed-off-by: James Smart <james.smart@broadcom.com>
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Christoph Hellwig <hch@lst.de>

On reconnect, the code currently does not freeze the controller before
possibly updating the number hw queues for the controller.

Add the freeze before updating the number of hw queues.  Note: the queues
are already started and remain started through the reconnect.
Signed-off-by: James Smart <james.smart@broadcom.com>
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Christoph Hellwig <hch@lst.de>

The loop that backs out of hw io queue creation continues through index
0, which corresponds to the admin queue as well.

Fix the loop so it only proceeds through indexes 1..n which correspond to
I/O queues.
Signed-off-by: James Smart <james.smart@broadcom.com>
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Christoph Hellwig <hch@lst.de>

Currently, an I/O timeout unconditionally invokes
nvme_fc_error_recovery() which checks for LIVE or CONNECTING state.  If
live, the routine resets the controller which initiates a reconnect -
which is valid.  If CONNECTING, err_work is scheduled.  Err_work then
calls the terminate_io routine, which also checks for CONNECTING and
noops any further action on outstanding I/O.  The result is nothing
happened to the timed out io.  As such, if the command was dropped on
the wire, it will never timeout / complete, and the connect process
will hang.

Change the behavior of the io timeout routine to unconditionally abort
the I/O.  I/O completion handling will note that an io failed due to an
abort and will terminate the connection / association as needed.  If the
abort was unable to happen, continue with a call to
nvme_fc_error_recovery(). To ensure something different happens in
nvme_fc_error_recovery() rework it so at it will abort all I/Os on the
association to force a failure.

As I/O aborts now may occur outside of delete_association, counting for
completion must be wary and only count those aborted during
delete_association when TERMIO is set on the controller.
Signed-off-by: James Smart <james.smart@broadcom.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>

By default, we set the passthru request allocation flag such that it
returns the error in the following code path and we fail the I/O when
BLK_MQ_REQ_NOWAIT is used for request allocation :-

nvme_alloc_request()
 blk_mq_alloc_request()
  blk_mq_queue_enter()
   if (flag & BLK_MQ_REQ_NOWAIT)
        return -EBUSY; <-- return if busy.

On some controllers using BLK_MQ_REQ_NOWAIT ends up in I/O error where
the controller is perfectly healthy and not in a degraded state.

Block layer request allocation does allow us to wait instead of
immediately returning the error when we BLK_MQ_REQ_NOWAIT flag is not
used. This has shown to fix the I/O error problem reported under
heavy random write workload.

Remove the BLK_MQ_REQ_NOWAIT parameter for passthru request allocation
which resolves this issue.
Signed-off-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Reviewed-by: Logan Gunthorpe <logang@deltatee.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>

Clean up some confusing elements of nvmet_passthru_map_sg() by returning
early if the request is greater than the maximum bio size. This allows
us to drop the sg_cnt variable.

This should not result in any functional change but makes the code
clearer and more understandable. The original code allocated a truncated
bio then would return EINVAL when bio_add_pc_page() filled that bio. The
new code just returns EINVAL early if this would happen.

Fixes: c1fef73f ("nvmet: add passthru code to process commands")
Signed-off-by: Logan Gunthorpe <logang@deltatee.com>
Suggested-by: Douglas Gilbert <dgilbert@interlog.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>

nvmet_passthru_map_sg() only supports mapping a single BIO, not a chain
so the effective maximum transfer should also be limitted by
BIO_MAX_PAGES (presently this works out to 1MB).

For PCI passthru devices the max_sectors would typically be more
limitting than BIO_MAX_PAGES, but this may not be true for all passthru
devices.

Fixes: c1fef73f ("nvmet: add passthru code to process commands")
Suggested-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Logan Gunthorpe <logang@deltatee.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Sagi Grimberg <sagi@grimberg.me>
Cc: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>

When connecting a controller with a zero kato value using the following
command line

   nvme connect -t tcp -n NQN -a ADDR -s PORT --keep-alive-tmo=0

the warning below can be reproduced:

WARNING: CPU: 1 PID: 241 at kernel/workqueue.c:1627 __queue_delayed_work+0x6d/0x90
with trace:
  mod_delayed_work_on+0x59/0x90
  nvmet_update_cc+0xee/0x100 [nvmet]
  nvmet_execute_prop_set+0x72/0x80 [nvmet]
  nvmet_tcp_try_recv_pdu+0x2f7/0x770 [nvmet_tcp]
  nvmet_tcp_io_work+0x63f/0xb2d [nvmet_tcp]
  ...

This is caused by queuing up an uninitialized work.  Althrough the
keep-alive timer is disabled during allocating the controller (fixed in
0d3b6a8d), ka_work still has a chance to run (called by
nvmet_start_ctrl).

Fixes: 0d3b6a8d ("nvmet: Disable keep-alive timer when kato is cleared to 0h")
Signed-off-by: zhenwei pi <pizhenwei@bytedance.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>

Like commit 5611ec2b ("nvme-pci: prevent SK hynix PC400 from using
Write Zeroes command"), Sandisk Skyhawk has the same issue:
[ 6305.633887] blk_update_request: operation not supported error, dev nvme0n1, sector 340812032 op 0x9:(WRITE_ZEROES) flags 0x0 phys_seg 0 prio class 0

So also disable Write Zeroes command on Sandisk Skyhawk.

BugLink: https://bugs.launchpad.net/bugs/1899503Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
Reviewed-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>

The request's rq_disk isn't set for passthrough IO commands, so tracing
uses qid 0 for these which incorrectly decodes as an admin command. Use
the request_queue's queuedata instead since that value is always set for
the IO queues, and never set for the admin queue.
Signed-off-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Christoph Hellwig <hch@lst.de>

A crash happened due to injecting error test.
When a CQE has incorrect command id due do an error injection, the host
may find a request which is already freed.  Dereferencing req->mr->rkey
causes a crash in nvme_rdma_process_nvme_rsp because the mr is already
freed.

Add a check for the mr to fix it.
Signed-off-by: Chao Leng <lengchao@huawei.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Christoph Hellwig <hch@lst.de>

A crash can happened when a connect is rejected.   The host establishes
the connection after received ConnectReply, and then continues to send
the fabrics Connect command.  If the controller does not receive the
ReadyToUse capsule, host may receive a ConnectReject reply.

Call nvme_rdma_destroy_queue_ib after the host received the
RDMA_CM_EVENT_REJECTED event.  Then when the fabrics Connect command
times out, nvme_rdma_timeout calls nvme_rdma_complete_rq to fail the
request.  A crash happenes due to use after free in
nvme_rdma_complete_rq.

nvme_rdma_destroy_queue_ib is redundant when handling the
RDMA_CM_EVENT_REJECTED event as nvme_rdma_destroy_queue_ib is already
called in connection failure handler.
Signed-off-by: Chao Leng <lengchao@huawei.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Christoph Hellwig <hch@lst.de>

After removing blk-sq code, there is no user of nr_batch_requests
and last_waited in kernel.
Signed-off-by: Yufen Yu <yuyufen@huawei.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

We don't need to check whether the node is memoryless numa node before
calling allocator interface. SLUB(and SLAB,SLOB) relies on the page
allocator to pick a node. Page allocator should deal with memoryless
nodes just fine. It has zonelists constructed for each possible nodes.
And it will automatically fall back into a node which is closest to the
requested node. As long as __GFP_THISNODE is not enforced of course.

The code comments of kmem_cache_alloc_node() of SLAB also showed this:
 * Fallback to other node is possible if __GFP_THISNODE is not set.

blk-mq code doesn't set __GFP_THISNODE, so we can remove the calling
of local_memory_node().
Signed-off-by: Xianting Tian <tian.xianting@h3c.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

Mikhail reported a lockdep spat detailing how __zram_bvec_read() and
__zram_bvec_write() use zstrm->lock and zspage->lock in opposite order.
Reported-by: Mikhail Gavrilov <mikhail.v.gavrilov@gmail.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Tested-by: Mikhail Gavrilov <mikhail.v.gavrilov@gmail.com>
Acked-by: Minchan Kim <minchan@kernel.org>
Acked-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

Remove including <linux/version.h> that don't need it.
Signed-off-by: Tian Tao <tiantao6@hisilicon.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

sgl_alloc_order() can fail when 'length' is large on a memory
constrained system. When order > 0 it will potentially be
making several multi-page allocations with the later ones more
likely to fail than the earlier one. So it is important that
sgl_alloc_order() frees up any pages it has obtained before
returning NULL. In the case when order > 0 it calls the wrong
free page function and leaks. In testing the leak was
sufficient to bring down my 8 GiB laptop with OOM.
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Douglas Gilbert <dgilbert@interlog.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

There is an off-by-one array check that can lead to a out-of-bounds
write to devices->info[i].  Fix this by checking by using >= rather
than > for the size check. Also replace hard-coded array size limit
with ARRAY_SIZE on the array.

Addresses-Coverity: ("Out-of-bounds write")
Fixes: cd9e9808 ("lightnvm: Support for Open-Channel SSDs")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

There has one race case for ceph's rbd-nbd tool. When do mapping
it may fail with EBUSY from ioctl(nbd, NBD_DO_IT), but actually
the nbd device has already unmaped.

It dues to if just after the wake_up(), the recv_work() is scheduled
out and defers calling the nbd_config_put(), though the map process
has exited the "nbd->recv_task" is not cleared.
Signed-off-by: Xiubo Li <xiubli@redhat.com>
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

ZBC or ZAC disks that have a limit on the number of open zones may fail
a zone open command or a write to a zone that is not already implicitly
or explicitly open if the total number of open zones is already at the
maximum allowed.

For these operations, instead of returning the generic BLK_STS_IOERR,
return BLK_STS_ZONE_OPEN_RESOURCE which is returned as -ETOOMANYREFS to
the I/O issuer, allowing the device user to act appropriately on these
relatively benign zone resource errors.
Acked-by: Martin K. Petersen <martin.petersen@oracle.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com>
Signed-off-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

Translate zoned resource errors to the appropriate blk_status_t.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Damien Le Moal <damien.lemoal@wdc.com>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

A zoned device with limited resources to open or activate zones may
return an error when the host exceeds those limits. The same command may
be successful if retried later, but the host needs to wait for specific
zone states before it should expect a retry to succeed. Have the block
layer provide an appropriate status for these conditions so applications
can distinuguish this error for special handling.

Cc: linux-api@vger.kernel.org
Cc: Niklas Cassel <niklas.cassel@wdc.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Damien Le Moal <damien.lemoal@wdc.com>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

After send_msg_open is done, send_msg_close should be done
if any error occurs and it is necessary to recover
what has been done.
Signed-off-by: Gioh Kim <gi-oh.kim@cloud.ionos.com>
Signed-off-by: Jack Wang <jinpu.wang@cloud.ionos.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

The max_hw_secotrs is only limited by the transport, not remote device,
block layer on server side will split to the device limit if it's too
big.

The max_segments, similar, and rtrs server will submit single buffer, so
no need to cap.
Signed-off-by: Jack Wang <jinpu.wang@cloud.ionos.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

The argument is not needed since all callers pass 1 for it.
Signed-off-by: Guoqing Jiang <guoqing.jiang@cloud.ionos.com>
Signed-off-by: Jack Wang <jinpu.wang@cloud.ionos.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

Pull x86 asm updates from Borislav Petkov:
 "Two asm wrapper fixes:

   - Use XORL instead of XORQ to avoid a REX prefix and save some bytes
     in the .fixup section, by Uros Bizjak.

   - Replace __force_order dummy variable with a memory clobber to fix
     LLVM requiring a definition for former and to prevent memory
     accesses from still being cached/reordered, by Arvind Sankar"

* tag 'x86_asm_for_v5.10' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/asm: Replace __force_order with a memory clobber
  x86/uaccess: Use XORL %0,%0 in __get_user_asm()

Pull block driver updates from Jens Axboe:
 "Here are the driver updates for 5.10.

  A few SCSI updates in here too, in coordination with Martin as they
  depend on core block changes for the shared tag bitmap.

  This contains:

   - NVMe pull requests via Christoph:
      - fix keep alive timer modification (Amit Engel)
      - order the PCI ID list more sensibly (Andy Shevchenko)
      - cleanup the open by controller helper (Chaitanya Kulkarni)
      - use an xarray for the CSE log lookup (Chaitanya Kulkarni)
      - support ZNS in nvmet passthrough mode (Chaitanya Kulkarni)
      - fix nvme_ns_report_zones (Christoph Hellwig)
      - add a sanity check to nvmet-fc (James Smart)
      - fix interrupt allocation when too many polled queues are
        specified (Jeffle Xu)
      - small nvmet-tcp optimization (Mark Wunderlich)
      - fix a controller refcount leak on init failure (Chaitanya
        Kulkarni)
      - misc cleanups (Chaitanya Kulkarni)
      - major refactoring of the scanning code (Christoph Hellwig)

   - MD updates via Song:
      - Bug fixes in bitmap code, from Zhao Heming
      - Fix a work queue check, from Guoqing Jiang
      - Fix raid5 oops with reshape, from Song Liu
      - Clean up unused code, from Jason Yan
      - Discard improvements, from Xiao Ni
      - raid5/6 page offset support, from Yufen Yu

   - Shared tag bitmap for SCSI/hisi_sas/null_blk (John, Kashyap,
     Hannes)

   - null_blk open/active zone limit support (Niklas)

   - Set of bcache updates (Coly, Dongsheng, Qinglang)"

* tag 'drivers-5.10-2020-10-12' of git://git.kernel.dk/linux-block: (78 commits)
  md/raid5: fix oops during stripe resizing
  md/bitmap: fix memory leak of temporary bitmap
  md: fix the checking of wrong work queue
  md/bitmap: md_bitmap_get_counter returns wrong blocks
  md/bitmap: md_bitmap_read_sb uses wrong bitmap blocks
  md/raid0: remove unused function is_io_in_chunk_boundary()
  nvme-core: remove extra condition for vwc
  nvme-core: remove extra variable
  nvme: remove nvme_identify_ns_list
  nvme: refactor nvme_validate_ns
  nvme: move nvme_validate_ns
  nvme: query namespace identifiers before adding the namespace
  nvme: revalidate zone bitmaps in nvme_update_ns_info
  nvme: remove nvme_update_formats
  nvme: update the known admin effects
  nvme: set the queue limits in nvme_update_ns_info
  nvme: remove the 0 lba_shift check in nvme_update_ns_info
  nvme: clean up the check for too large logic block sizes
  nvme: freeze the queue over ->lba_shift updates
  nvme: factor out a nvme_configure_metadata helper
  ...

Pull libata updates from Jens Axboe:
 "Nothing major in here, just fixes or improvements collected over the
  last few months"

* tag 'libata-5.10-2020-10-12' of git://git.kernel.dk/linux-block:
  ata: ahci: mvebu: Make SATA PHY optional for Armada 3720
  MAINTAINERS: remove LIBATA PATA DRIVERS entry
  pata_cmd64x: Use fallthrough pseudo-keyword
  ahci: qoriq: enable acpi support in qoriq ahci driver
  sata, highbank: simplify the return expression of ahci_highbank_suspend
  ahci: Add Intel Rocket Lake PCH-H RAID PCI IDs

Pull io_uring updates from Jens Axboe:

 - Add blkcg accounting for io-wq offload (Dennis)

 - A use-after-free fix for io-wq (Hillf)

 - Cancelation fixes and improvements

 - Use proper files_struct references for offload

 - Cleanup of io_uring_get_socket() since that can now go into our own
   header

 - SQPOLL fixes and cleanups, and support for sharing the thread

 - Improvement to how page accounting is done for registered buffers and
   huge pages, accounting the real pinned state

 - Series cleaning up the xarray code (Willy)

 - Various cleanups, refactoring, and improvements (Pavel)

 - Use raw spinlock for io-wq (Sebastian)

 - Add support for ring restrictions (Stefano)

* tag 'io_uring-5.10-2020-10-12' of git://git.kernel.dk/linux-block: (62 commits)
  io_uring: keep a pointer ref_node in file_data
  io_uring: refactor *files_register()'s error paths
  io_uring: clean file_data access in files_register
  io_uring: don't delay io_init_req() error check
  io_uring: clean leftovers after splitting issue
  io_uring: remove timeout.list after hrtimer cancel
  io_uring: use a separate struct for timeout_remove
  io_uring: improve submit_state.ios_left accounting
  io_uring: simplify io_file_get()
  io_uring: kill extra check in fixed io_file_get()
  io_uring: clean up ->files grabbing
  io_uring: don't io_prep_async_work() linked reqs
  io_uring: Convert advanced XArray uses to the normal API
  io_uring: Fix XArray usage in io_uring_add_task_file
  io_uring: Fix use of XArray in __io_uring_files_cancel
  io_uring: fix break condition for __io_uring_register() waiting
  io_uring: no need to call xa_destroy() on empty xarray
  io_uring: batch account ->req_issue and task struct references
  io_uring: kill callback_head argument for io_req_task_work_add()
  io_uring: move req preps out of io_issue_sqe()
  ...

Pull block updates from Jens Axboe:

 - Series of merge handling cleanups (Baolin, Christoph)

 - Series of blk-throttle fixes and cleanups (Baolin)

 - Series cleaning up BDI, seperating the block device from the
   backing_dev_info (Christoph)

 - Removal of bdget() as a generic API (Christoph)

 - Removal of blkdev_get() as a generic API (Christoph)

 - Cleanup of is-partition checks (Christoph)

 - Series reworking disk revalidation (Christoph)

 - Series cleaning up bio flags (Christoph)

 - bio crypt fixes (Eric)

 - IO stats inflight tweak (Gabriel)

 - blk-mq tags fixes (Hannes)

 - Buffer invalidation fixes (Jan)

 - Allow soft limits for zone append (Johannes)

 - Shared tag set improvements (John, Kashyap)

 - Allow IOPRIO_CLASS_RT for CAP_SYS_NICE (Khazhismel)

 - DM no-wait support (Mike, Konstantin)

 - Request allocation improvements (Ming)

 - Allow md/dm/bcache to use IO stat helpers (Song)

 - Series improving blk-iocost (Tejun)

 - Various cleanups (Geert, Damien, Danny, Julia, Tetsuo, Tian, Wang,
   Xianting, Yang, Yufen, yangerkun)

* tag 'block-5.10-2020-10-12' of git://git.kernel.dk/linux-block: (191 commits)
  block: fix uapi blkzoned.h comments
  blk-mq: move cancel of hctx->run_work to the front of blk_exit_queue
  blk-mq: get rid of the dead flush handle code path
  block: get rid of unnecessary local variable
  block: fix comment and add lockdep assert
  blk-mq: use helper function to test hw stopped
  block: use helper function to test queue register
  block: remove redundant mq check
  block: invoke blk_mq_exit_sched no matter whether have .exit_sched
  percpu_ref: don't refer to ref->data if it isn't allocated
  block: ratelimit handle_bad_sector() message
  blk-throttle: Re-use the throtl_set_slice_end()
  blk-throttle: Open code __throtl_de/enqueue_tg()
  blk-throttle: Move service tree validation out of the throtl_rb_first()
  blk-throttle: Move the list operation after list validation
  blk-throttle: Fix IO hang for a corner case
  blk-throttle: Avoid tracking latency if low limit is invalid
  blk-throttle: Avoid getting the current time if tg->last_finish_time is 0
  blk-throttle: Remove a meaningless parameter for throtl_downgrade_state()
  block: Remove redundant 'return' statement
  ...

Pull x86 fixes from Borislav Petkov:

 - Fix the #DE oops message string format which confused tools parsing
   crash information (Thomas Gleixner)

 - Remove an unused variable in the UV5 code which was triggering a
   build warning with clang (Mike Travis)

* tag 'x86_urgent_for_v5.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/platform/uv: Remove unused variable in UV5 NMI handler
  x86/traps: Fix #DE Oops message regression

Remove an unused variable.
Signed-off-by: Mike Travis <mike.travis@hpe.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lkml.kernel.org/r/20201013154731.132565-1-mike.travis@hpe.com

The conversion of #DE to the idtentry mechanism introduced a change in the
Ooops message which confuses tools which parse crash information in dmesg.

Remove the underscore from 'divide_error' to restore previous behaviour.

Fixes: 9d06c402 ("x86/entry: Convert Divide Error to IDTENTRY")
Reported-by: Dmitry Vyukov <dvyukov@google.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/CACT4Y+bTZFkuZd7+bPArowOv-7Die+WZpfOWnEO_Wgs3U59+oA@mail.gmail.com

Pull hwmon updates from Guenter Roeck:
 "New driver and chip support:
   - Moortec MR75203 PVT controller
   - MPS Multi-phase mp2975 controller
   - ADM1266
   - Zen3 CPUs
   - Intel MAX 10 BMC

  Enhancements:
   - Support for rated attributes in hwmon core
   - MAX20730:
      - Device monitoring via debugfs
      - VOUT readin adjustment vie devicetree bindings
   - LM75:
      - Devicetree support
      - Regulator support
   - Improved accumulationm logic in amd_energy driver
   - Added fan sensor to gsc-hwmon driver
   - Support for simplified I2C probing

  Various other minor fixes and improvements"

* tag 'hwmon-for-v5.10' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging: (64 commits)
  hwmon: (pmbus/max20730) adjust the vout reading given voltage divider
  dt-bindings: hwmon: max20730: adding device tree doc for max20730
  hwmon: Add hardware monitoring driver for Moortec MR75203 PVT controller
  hwmon: Add DT bindings schema for PVT controller
  dt-bindings: hwmon: Add the +vs supply to the lm75 bindings
  dt-bindings: hwmon: Convert lm75 bindings to yaml
  docs: hwmon: (ltc2945) update datasheet link
  hwmon: (mlxreg-fan) Fix double "Mellanox"
  hwmon: (pmbus/max20730) add device monitoring via debugfs
  hwmon: (pmbus/max34440) Fix OC fault limits
  hwmon: (bt1-pvt) Wait for the completion with timeout
  hwmon: (bt1-pvt) Cache current update timeout
  hwmon: (bt1-pvt) Test sensor power supply on probe
  hwmon: (lm75) Add regulator support
  hwmon: Add hwmon driver for Intel MAX 10 BMC
  dt-bindings: Add MP2975 voltage regulator device
  hwmon: (pmbus) Add support for MPS Multi-phase mp2975 controller
  hwmon: (tmp513) fix spelling typo in comments
  hwmon: (amd_energy) Update driver documentation
  hwmon: (amd_energy) Improve the accumulation logic
  ...

Pull GPIO updates from Linus Walleij:
 "This time very little driver changes but lots of core changes.

  We have some interesting cooperative work for ARM and Intel alike,
  making the GPIO subsystem more and more suitable for industrial
  systems and the like, in addition to the in-kernel users.

  We touch driver core (device properties) and lib/* by adding one
  simple string array free function, these are authored by Andy
  Shevchenko who is a well known and recognized core helpers maintainers
  so this should be fine.

  We also see some Android GKI-related modularization in the MXC
  drivers.

  Core changes:

   - The big core change is the updated (v2) userspace character device
     API.

     This corrects badly designed 64-bit alignment around the line
     events. We also add the debounce request feature. This echoes the
     often quotes passage from Frederick Brooks "The mythical man-month"
     to always throw one away, which we have seen before in things such
     as V4L2. So we put in a new one and deprecate and obsolete the old
     one.

   - All example tools in tools/gpio/* are migrated to the new API to
     set a good example. The libgpiod userspace library has been
     augmented to use this new API pretty much from day 1.

   - Some misc API hardening by using strn* function calls has been
     added as well.

   - Use the simpler IDA interface for GPIO chip instance enumeration.

   - Add device core function for counting string arrays in device
     properties.

   - Provide a generic library function kfree_strarray() that can be
     used throughout the kernel.

  Driver enhancements:

   - The DesignWare dwapb-gpio driver has been enhanced and now uses the
     IRQ handling in the gpiolib core.

   - The mockup and aggregator drivers have seen some substantial code
     clean-up and now use more of the core kernel inftrastructure.

   - Misc cleanups using dev_err_probe().

   - The MXC drivers (Freescale/NXP) can now be built modularized, which
     makes modularized GKI Android kernels happy"

* tag 'gpio-v5.10-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio: (73 commits)
  gpiolib: Update header block in gpiolib-cdev.h
  gpiolib: cdev: switch from kstrdup() to kstrndup()
  docs: gpio: add a new document to its index.rst
  gpio: pca953x: Add support for the NXP PCAL9554B/C
  tools: gpio: add debounce support to gpio-event-mon
  tools: gpio: add multi-line monitoring to gpio-event-mon
  tools: gpio: port gpio-event-mon to v2 uAPI
  tools: gpio: port gpio-hammer to v2 uAPI
  tools: gpio: rename nlines to num_lines
  tools: gpio: port gpio-watch to v2 uAPI
  tools: gpio: port lsgpio to v2 uAPI
  gpio: uapi: document uAPI v1 as deprecated
  gpiolib: cdev: support setting debounce
  gpiolib: cdev: support GPIO_V2_LINE_SET_VALUES_IOCTL
  gpiolib: cdev: support GPIO_V2_LINE_SET_CONFIG_IOCTL
  gpiolib: cdev: support edge detection for uAPI v2
  gpiolib: cdev: support GPIO_V2_GET_LINEINFO_IOCTL and GPIO_V2_GET_LINEINFO_WATCH_IOCTL
  gpiolib: cdev: support GPIO_V2_GET_LINE_IOCTL and GPIO_V2_LINE_GET_VALUES_IOCTL
  gpiolib: add build option for CDEV v1 ABI
  gpiolib: make cdev a build option
  ...

Pull spi updates from Mark Brown:
 "There's quite a lot of changes for SPI in this release but none in the
  core, they're all mostly small driver updates and additions. Some of
  the more notable changes include:

   - A huge set of cleanups, optimizations and improvements for the
     DesignWare driver from Serge Semin finishing up the work started
     last release.

   - Conversion of the Zynq gqspi driver to spi-mem.

   - Support for Baikal T1, Broadcom BCMSTB 7445, and Renesas R8A7742"

* tag 'spi-v5.10' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi: (137 commits)
  spi: cadence: Add SPI transfer delays
  spi: dw: Add Baikal-T1 SPI Controller bindings
  spi: dw: Add Baikal-T1 SPI Controller glue driver
  spi: dw: Add poll-based SPI transfers support
  spi: dw: Introduce max mem-ops SPI bus frequency setting
  spi: dw: Add memory operations support
  spi: dw: Add generic DW SSI status-check method
  spi: dw: Move num-of retries parameter to the header file
  spi: dw: Explicitly de-assert CS on SPI transfer completion
  spi: dw: De-assert chip-select on reset
  spi: dw: Discard chip enabling on DMA setup error
  spi: dw: Unmask IRQs after enabling the chip
  spi: dw: Perform IRQ setup in a dedicated function
  spi: dw: Refactor IRQ-based SPI transfer procedure
  spi: dw: Refactor data IO procedure
  spi: dw: Add DW SPI controller config structure
  spi: dw: Update Rx sample delay in the config function
  spi: dw: Simplify the SPI bus speed config procedure
  spi: dw: Update SPI bus speed in a config function
  spi: dw: Detach SPI device specific CR0 config method
  ...

Pull regulator updates from Mark Brown:
 "This is a fairly small release for the regulator API, there's quite a
  few new devices supported and some important improvements around
  coupled regulators in the core but mostly just small fixes and
  improvements otherwise.

  Summary:

   - Fixes and cleanups around the handling of coupled regulators.

   - A special driver for some Raspberry Pi panels with some unusually
     custom stuff around them.

   - Support for Qualcomm PM660/PM660L, PM8950 and PM8953, Richtek
     RT4801 and RTMV20, Rohm BD9576MUF and BD9573MUF"

* tag 'regulator-v5.10' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator: (89 commits)
  regulator: bd9576: Fix print
  regulator: bd9576: fix regulator binfdings dt node names
  dt-bindings: regulator: document pm8950 and pm8953 smd regulators
  regulator: qcom_smd: add pm8953 regulators
  regulator: Make constraint debug processing conditional on DEBUG
  regulator: qcom: labibb: Constify static structs
  regulator: dt-bindings: Document the PM660/PM660L PMICs entries
  regulator: qcom_smd: Add PM660/PM660L regulator support
  regulator: dt-bindings: Document the PM660/660L SPMI PMIC entries
  regulator: qcom_spmi: Add PM660/PM660L regulators
  regulator: qcom_spmi: Add support for new regulator types
  regulator: core: Enlarge max OF property name length to 64 chars
  regulator: tps65910: use regmap accessors
  regulator: rtmv20: Add missing regcache cache only before marked as dirty
  regulator: rtmv20: Update DT binding document and property name parsing
  regulator: rtmv20: Add DT-binding document for Richtek RTMV20
  regulator: rtmv20: Adds support for Richtek RTMV20 load switch regulator
  regulator: resolve supply after creating regulator
  regulator: print symbolic errors in kernel messages
  regulator: print state at boot
  ...

Pull regmap updates from Mark Brown:
 "Quite a busy release for regmap, mostly support for new features
  useful on fairly small subsets of devices. The user visible features
  are:

   - A new API for registering large numbers of regmap fields at once.

   - Support for Intel AVMM buses connected via SPI.

   - Support for 12/20 address/value layouts.

   - Support for yet another scheme for acknowledging interrupts used on
     some Qualcomm devices"

* tag 'regmap-v5.10' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap:
  regmap: irq: Add support to clear ack registers
  regmap: add support to regmap_field_bulk_alloc/free apis
  regmap: destroy mutex (if used) in regmap_exit()
  regmap: debugfs: use semicolons rather than commas to separate statements
  regmap: debugfs: Fix more error path regressions
  regmap: Add support for 12/20 register formatting
  regmap: Add can_sleep configuration option
  regmap: soundwire: remove unused header mod_devicetable.h
  regmap: Use flexible sleep
  regmap: add Intel SPI Slave to AVMM Bus Bridge support

Pull media updates from Mauro Carvalho Chehab:

 - the usbvision driver was dropped from staging

 - the Zoran driver were re-added at staging. It gained lots of
   improvements, and was converted to use videobuf2 API

 - a new virtual driver (vidtv) was added in order to allow testing the
   digital TV framework and APIs

 - the media uAPI documentation gained a glossary with commonly used
   terms, helping to simplify some parts of the docs

 - more cleanups at the atomisp driver

 - Mediatek VPU gained support for MT8183

 - added support for codecs with supports doing colorspace conversion
   (CSC)

 - support for CSC API was added at vivid and rksip1 drivers

 - added a helper core support and uAPI for better supporting H.264
   codecs

 - added support for Renesas R8A774E1

 - use the new SPDX GFDL-1.1-no-invariants-or-later license on media
   uAPI docs, instead of a license text

 - Venus driver has gained VP9 codec support

 - lots of other cleanups and driver improvements

* tag 'media/v5.10-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (555 commits)
  media: dvb-frontends/drxk_hard.c: fix uninitialized variable warning
  media: tvp7002: fix uninitialized variable warning
  media: s5k5baf: drop 'data' field in struct s5k5baf_fw
  media: dt-bindings: media: venus: Add an optional power domain for perf voting
  media: rcar-vin: rcar-dma: Fix setting VNIS_REG for RAW8 formats
  media: staging: rkisp1: uapi: Do not use BIT() macro
  media: v4l2-mem2mem: Fix spurious v4l2_m2m_buf_done
  media: usbtv: Fix refcounting mixup
  media: zoran.rst: place it at the right place this time
  media: add Zoran cardlist
  media: admin-guide: update cardlists
  media: siano: rename a duplicated card string
  media: zoran: move documentation file to the right place
  media: atomisp: fixes build breakage for ISP2400 due to a cleanup
  media: zoran: fix mixed case on vars
  media: zoran: get rid of an unused var
  media: zoran: use upper case for card types
  media: zoran: fix sparse warnings
  media: zoran: fix smatch warning
  media: zoran: update TODO
  ...

Pull MMC updates from Ulf Hansson:
 "MMC core:
   - Export SDIO revision and info strings to userspace
   - Add support for specifying mmc/mmcblk index via mmc aliases in DT

 MMC host:
   - Enable support for async probe for all mmc host drivers
   - Enable compile testing of multiple host drivers
   - dw_mmc: Enable the Synopsys DesignWare driver for RISCV and CSKY
   - mtk-sd: Fixup support for CQHCI
   - owl-mmc: Add support for the actions,s700-mmc variant
   - renesas_sdhi: Fix regression (temporary) for re-insertion of SD cards
   - renesas_sdhi: Add support for the r8a774e1 variant
   - renesas_sdhi/tmio: Improvements for tunings
   - renesas_sdhi/tmio: Rework support for reset of controller
   - sdhci-acpi: Fix HS400 tuning for devices with invalid presets on AMDI0040
   - sdhci_am654: Improve support for tunings
   - sdhci_am654: Add support for input tap delays
   - sdhci_am654: Add workaround for card detect debounce timer
   - sdhci-am654: Add support for the TI's J7200 variants
   - sdhci-esdhc-imx: Fix support for manual tuning
   - sdhci-iproc: Enable support for eMMC DDR 3.3V for bcm2711
   - sdhci-msm: Fix stability issues with HS400 for sc7180
   - sdhci-of-sparx5: Add Sparx5 SoC eMMC driver
   - sdhci-of-esdhc: Fixup reference clock source selection
   - sdhci-pci: Add LTR support for some Intel BYT controllers
   - sdhci-pci-gli: Add CQHCI Support for GL9763E"

* tag 'mmc-v5.10' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc: (91 commits)
  mmc: sdhci_am654: Fix module autoload
  mmc: renesas_sdhi: workaround a regression when reinserting SD cards
  mmc: sdhci-pci-gli: Add CQHCI Support for GL9763E
  mmc: sdhci-acpi: AMDI0040: Set SDHCI_QUIRK2_PRESET_VALUE_BROKEN
  mmc: sdhci_am654: Enable tuning for SDR50
  mmc: sdhci_am654: Add support for software tuning
  mmc: sdhci_am654: Add support for input tap delay
  mmc: sdhci_am654: Fix hard coded otap delay array size
  dt-bindings: mmc: sdhci-am654: Add documentation for input tap delay
  dt-bindings: mmc: sdhci-am654: Convert sdhci-am654 controller documentation to json schema
  mmc: sdhci-of-esdhc: fix reference clock source selection
  mmc: host: fix depends for MMC_MESON_GX w/ COMPILE_TEST
  mmc: sdhci-s3c: hide forward declaration of of_device_id behind CONFIG_OF
  mmc: sdhci: fix indentation mistakes
  mmc: moxart: remove unneeded check for drvdata
  mmc: renesas_sdhi: drop local flag for tuning
  mmc: rtsx_usb_sdmmc: simplify the return expression of sd_change_phase()
  mmc: core: document mmc_hw_reset()
  mmc: mediatek: Drop pointer to mmc_host from msdc_host
  dt-bindings: mmc: owl: add compatible string actions,s700-mmc
  ...