- 26 Nov, 2006 6 commits
-
-
Hans Verkuil authored
The old code would accept any device on the same i2c address as the saa711x chips as an saa711x. However, this fails with saa717x chips, which use that same address and so are misdetected as a saa7111. Now check whether the chip is really a saa711x model. Signed-off-by:
Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by:
Mauro Carvalho Chehab <mchehab@infradead.org>
-
Luca Risolia authored
The patch fix bug 5748. Signed-off-by:
Luca Risolia <luca.risolia@studio.unibo.it> Signed-off-by:
-
Ira Snyder authored
Sparse noticed a lock imbalance in read_from_buf(). Further inspection shows that the lock should not be held when the function exits. This adds a spin_unlock_irqrestore(), so that every exit path of the read_from_buf() function is consistent. The unlock was missing on an error path. Signed-off-by:
Ira W. Snyder <devel@irasnyder.com> Signed-off-by:
Hans J. Koch <koch@hjk-az.de> Signed-off-by:
-
Andrew de Quincey authored
Spotted by coverity/Adrian Bunk. Signed-off-by:
Andrew de Quincey <adq_dvb@lidskialf.net> Signed-off-by:
-
Oliver Endriss authored
New module parameter diseqc_method for cards with subsystem-id 13c2:1003. - 0: unreliable method, can be used by all board revisions (default) - 1: reliable method, works for newer board layouts only The parameter has no effect for cards with other subsystem-ids. Signed-off-by:
Oliver Endriss <o.endriss@gmx.de> Signed-off-by:
-
Andrew de Quincey authored
Fixes to DISEQC on these cards inadvertently broke normal tone/voltage signalling. This restores the necessary function. Signed-off-by:
-
- 25 Nov, 2006 20 commits
-
-
Paolo 'Blaisorblade' Giarrusso authored
Reimplement execvp for our purposes - after we call fork() it is fundamentally unsafe to use the kernel allocator - current is not valid there. So we simply pass to our modified execvp() a preallocated buffer. This fixes a real bug and works very well in testing (I've seen indirectly warning messages from the forked thread - they went on the pipe connected to its stdout and where read as a number by UML, when calling read_output(). I verified the obtained number corresponded to "BUG:"). The added use of __cant_sleep() is not a new bug since __cant_sleep() is already used in the same function - passing an atomicity parameter would be better but it would require huge change, stating that this function must not be called in atomic context and can sleep is a better idea (will make sure of this gradually). Signed-off-by:
Paolo 'Blaisorblade' Giarrusso <blaisorblade@yahoo.it> Acked-by:
Jeff Dike <jdike@addtoit.com> Signed-off-by:
Andrew Morton <akpm@osdl.org> Signed-off-by:
Linus Torvalds <torvalds@osdl.org>
-
Mariusz Kozlowski authored
This is a bug. When checking for ati_remote->outbuf we free freeing ati_remote->inbuf so we end up freeing ati_remote->inbuf twice. Also the checks for 'ati_remote->inbuf != NULL' and 'ati_remote->outbuf != NULL' are redundant as usb_buffer_free() does this. Signed-off-by:
Mariusz Kozlowski <m.kozlowski@tuxland.pl> Acked-by:
Greg KH <greg@kroah.com> Signed-off-by:
-
Arjan van de Ven authored
Introduce spin_lock_irqsave_nested(); implementation from: http://lkml.org/lkml/2006/6/1/122 Patch from: http://lkml.org/lkml/2006/9/13/258 [akpm@osdl.org: two compile fixes] Signed-off-by:
Arjan van de Ven <arjan@linux.intel.com> Signed-off-by:
Jiri Kosina <jikos@jikos.cz> Signed-off-by:
Peter Zijlstra <a.p.zijlstra@chello.nl> Acked-by:
Ingo Molnar <mingo@elte.hu> Signed-off-by:
-
Alexey Dobriyan authored
Make it break or warn if you pass to spin_lock_irqsave() and friends something different from "unsigned long flags;". Suprisingly large amount of these was caught by recent commit c53421b1 and others. Idea is largely from FRV typechecking. Suggestions from Andrew Morton. All stupid typos in first version fixed. Passes allmodconfig on i386, x86_64, alpha, arm as well as my usual config. Note #1: checking with sparse is still needed, because a driver can save and pass around flags or something. So far patch is very intrusive. Note #2: techically, we should break only if sizeof(flags) < sizeof(unsigned long), however, the more pain for getting suspicious code into kernel, the better. Signed-off-by:
Alexey Dobriyan <adobriyan@gmail.com> Cc: Ingo Molnar <mingo@elte.hu> Signed-off-by:
-
Akinobu Mita authored
The return value of platform_device_register_simple() should be checked by IS_ERR(). This patch also fix misc_register() error case. Because misc_register() returns error code. Cc: Sebastien Bouchard <sebastien.bouchard@ca.kontron.com> Signed-off-by:
Akinobu Mita <akinobu.mita@gmail.com> Signed-off-by:
-
Akinobu Mita authored
The return value of copy_process() should be checked by IS_ERR(). Signed-off-by:
-
Jeremy Higdon authored
This patch removes a module_exit function that sgiioc4 should not have had. It seems that the IDE layer doesn't support submodule unloading. sgiioc4 was the only driver in drivers/ide/pci that had an exit function. After an unload, the devices would stay around and the next attempt to reference would crash... Signed-off-by:
Jeremy Higdon <jeremy@sgi.com> Acked-by:
"Bartlomiej Zolnierkiewicz" <bzolnier@gmail.com> Signed-off-by:
-
Roman Zippel authored
On Mon, 13 Nov 2006, Phil Oester wrote: > In commit 350b5b76, the default menuconfig > color scheme was changed to bluetitle. This breaks the highlighting > of the selected item for me with TERM=vt100. The only way I can see > which item is selected is via: > > make MENUCONFIG_COLOR=mono menuconfig > > Which restores the pre-2.6.19 white on black highlighting. Fix. Cc: Phil Oester <kernel@linuxace.com> Signed-off-by:
Roman Zippel <zippel@linux-m68k.org> Signed-off-by:
-
Roman Zippel authored
Fixes a segfault reported by Randy. Cc: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by:
-
Catalin Marinas authored
dev->devt_attr is allocated in device_add() but it is never freed in device_del() in the drivers/base/core.c file (reported by kmemleak). Signed-off-by:
Catalin Marinas <catalin.marinas@gmail.com> Acked-by:
-
Alexey Dobriyan authored
One reiserfs_warning() call uses %lu, but doesn't supply what to print. Signed-off-by:
-
Adrian Bunk authored
The correct order is: NULL check before dereference This was a guaranteed NULL dereference with debugging enabled since rs5c372_sysfs_show_osc() does actually pass NULL... Spotted by the Coverity checker. Signed-off-by:
Adrian Bunk <bunk@stusta.de> Acked-by:
Alessandro Zummo <a.zummo@towertech.it> Signed-off-by:
-
David Brownell authored
I got a lockdep warning when running "rtctest" so I though it'd be good to see what was up. - The warning was for rtc->irq_task_lock, gotten from rtc_update_irq() by irq handlerss ... but in a handful of other cases, grabbed without blocking IRQs. - Some callers to rtc_update_irq() were not ensuring IRQs were blocked, yet the routine expects that; make sure all callers block IRQs. It would appear that RTC API tests haven't been part of anyone's kernel regression test suite recently, at least not with lockdep running. Signed-off-by:
David Brownell <dbrownell@users.sourceforge.net> Acked-by:
-
David Brownell authored
The RTC framework has an irq_set_freq() method that should be used to manage the periodic IRQ frequency, but the current ioctl logic doesn't know how to do that. This patch teaches it how. This means that drivers implementing irq_set_freq() will automatically support RTC_IRQP_{READ,SET} ioctls; that logic doesn't need duplication within the driver. [akpm@osdl.org: export rtc_irq_set_freq] Signed-off-by: -
David Brownell authored
This updates the RTC documentation to summarize the two APIs now available: the old PC/AT one, and the new RTC class drivers. It also updates the included "rtctest.c" file to better meet Linux style guidelines, and to work with the new RTC drivers. Signed-off-by:
-
Randy Dunlap authored
debugfs needs include/linux/kobject.h for <kernel_subsys>. Signed-off-by:
Randy Dunlap <randy.dunlap@oracle.com> Cc: Greg KH <greg@kroah.com> Signed-off-by:
-
Vasily Tarasov authored
OpenVZ developers team has encountered the following problem in 2.6.19-rc6 kernel. After some seconds of running script while [[ 1 ]] do find /proc -name mountstats | xargs cat done this Oops appears: BUG: unable to handle kernel NULL pointer dereference at virtual address 00000010 printing eip: c01a6b70 *pde = 00000000 Oops: 0000 [#1] SMP Modules linked in: xt_length ipt_ttl xt_tcpmss ipt_TCPMSS iptable_mangle iptable_filter xt_multiport xt_limit ipt_tos ipt_REJECT ip_tables x_tables parport_pc lp parport sunrpc af_packet thermal processor fan button battery asus_acpi ac ohci_hcd ehci_hcd usbcore i2c_nforce2 i2c_core tg3 floppy pata_amd ide_cd cdrom sata_nv libata CPU: 1 EIP: 0060:[<c01a6b70>] Not tainted VLI EFLAGS: 00010246 (2.6.19-rc6 #2) EIP is at mountstats_open+0x70/0xf0 eax: 00000000 ebx: e6247030 ecx: e62470f8 edx: 00000000 esi: 00000000 edi: c01a6b00 ebp: c33b83c0 esp: f4105eb4 ds: 007b es: 007b ss: 0068 Process cat (pid: 6044, ti=f4105000 task=f4104a70 task.ti=f4105000) Stack: c33b83c0 c04ee940 f46a4a80 c33b83c0 e4df31b4 c01a6b00 f4105000 c0169231 e4df31b4 c33b83c0 c33b83c0 f4105f20 00000003 f4105000 c0169445 f2503cf0 f7f8c4c0 00008000 c33b83c0 00000000 00008000 c0169350 f4105f20 00008000 Call Trace: [<c01a6b00>] mountstats_open+0x0/0xf0 [<c0169231>] __dentry_open+0x181/0x250 [<c0169445>] nameidata_to_filp+0x35/0x50 [<c0169350>] do_filp_open+0x50/0x60 [<c01873d6>] seq_read+0xc6/0x300 [<c0169511>] get_unused_fd+0x31/0xc0 [<c01696d3>] do_sys_open+0x63/0x110 [<c01697a7>] sys_open+0x27/0x30 [<c01030bd>] sysenter_past_esp+0x56/0x79 ======================= Code: 45 74 8b 54 24 20 89 44 24 08 8b 42 f0 31 d2 e8 47 cb f8 ff 85 c0 89 c3 74 51 8d 80 a0 04 00 00 e8 46 06 2c 00 8b 83 48 04 00 00 <8b> 78 10 85 ff 74 03 f0 ff 07 b0 01 86 83 a0 04 00 00 f0 ff 4b EIP: [<c01a6b70>] mountstats_open+0x70/0xf0 SS:ESP 0068:f4105eb4 The problem is that task->nsproxy can be equal NULL for some time during task exit. This patch fixes the BUG. Signed-off-by:Vasily Tarasov <vtaras@openvz.org> Cc: Herbert Poetzl <herbert@13thfloor.at> Cc: "Serge E. Hallyn" <serue@us.ibm.com> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Signed-off-by:
-
Miklos Szeredi authored
Fix bug in certain error paths of lookup routines. The request object was reused for sending FORGET, which is illegal. This bug could cause an Oops in 2.6.18. In earlier versions it might silently corrupt memory, but this is very unlikely. These error paths are never triggered by libfuse, so this wasn't noticed even with the 2.6.18 kernel, only with a filesystem using the raw kernel interface. Thanks to Russ Cox for the bug report and test filesystem. Signed-off-by:
Miklos Szeredi <miklos@szeredi.hu> Cc: <stable@kernel.org> Signed-off-by:
-
Thomas Chou authored
Fix bug 7401. Handle more than one source dir or file list to the initramfs gen scripts. The Kconfig help for INITRAMFS_SOURCE claims that you can specify multiple space-separated sources in order to allow unprivileged users to build an image. There are two bugs in the current implementation that prevent this from working. First, we pass "file1 dir2" to the gen_initramfs_list.sh script, which it obviously can't open. Second, gen_initramfs_list.sh -l outputs multiple definitions for deps_initramfs -- one for each argument. Signed-off-by:
Thomas Chou <thomas@wytron.com.tw> Cc: Sam Ravnborg <sam@ravnborg.org> Acked-by:
Matthew Wilcox <matthew@wil.cx> Signed-off-by:
-
Daniel Ritz authored
Add required locking to dfbc9e9dSigned-off-by:
Daniel Ritz <daniel.ritz@gmx.ch> Cc: Dominik Brodowski <linux@dominikbrodowski.net> Cc: Pavol Gono <Palo.Gono@gmail.com> Cc: <stable@kernel.org> Signed-off-by:
-
- 23 Nov, 2006 5 commits
-
-
Mel Gorman authored
find_min_pfn_for_node() and find_min_pfn_with_active_regions() both depend on a sorted early_node_map[]. However, sort_node_map() is being called after fin_min_pfn_with_active_regions() in free_area_init_nodes(). In most cases, this is ok, but on at least one x86_64, the SRAT table caused the E820 ranges to be registered out of order. This gave the wrong values for the min PFN range resulting in some pages not being initialised. This patch sorts the early_node_map in find_min_pfn_for_node(). It has been boot tested on x86, x86_64, ppc64 and ia64. Signed-off-by:
Mel Gorman <mel@csn.ul.ie> Acked-by:
Andre Noll <maan@systemlinux.org> Signed-off-by:
-
Jean Delvare authored
Fix recent i2c-ixp4xx compilation breakage. Sorry for overlooking it. Signed-off-by:
Jean Delvare <khali@linux-fr.org> Signed-off-by:
-
Dave Jones authored
processor_perflib.c::acpi_processor_ppc_notifier() check if the value returned by the processor's _PPC method is 0 and return failed if so. This is wrong since 0 indicate that the bios think the processor can go to the highest frequency. This patch for example fix the HP NX 6125 to allow its highest frequency to be available. Signed-off-by:
Bruno Ducrot <ducrot@poupinou.org> Cc: "Pallipadi, Venkatesh" <venkatesh.pallipadi@intel.com> Signed-off-by:
Dave Jones <davej@redhat.com> Signed-off-by:
-
Linus Torvalds authored
* 'for-linus' of master.kernel.org:/home/rmk/linux-2.6-arm: [ARM] 3941/1: [Jornada7xx] - Addition to MAINTAINERS [ARM] 3942/1: ARM: comment: consistent_sync should not be called directly [ARM] ebsa110: fix warnings generated by asm/arch/io.h [ARM] 3933/1: Source drivers/ata/Kconfig
-
git://ftp.linux-mips.org/pub/scm/upstream-linusLinus Torvalds authored
* 'upstream' of git://ftp.linux-mips.org/pub/scm/upstream-linus: [PATCH] make au1xxx-ide compile again [MIPS] Hack for SB1 cache issues
-
- 22 Nov, 2006 9 commits
-
-
Manuel Lauss authored
The Au1xx IDE controller driver doesn't compile: CC drivers/ide/mips/au1xxx-ide.o /linux-2.6.19-rc6-work/drivers/ide/mips/au1xxx-ide.c:480: error: conflicting types for 'auide_ddma_tx_callback' include2/asm/mach-au1x00/au1xxx_ide.h:174: error: previous declaration of 'auide_ddma_tx_callback' was here /linux-2.6.19-rc6-work/drivers/ide/mips/au1xxx-ide.c:486: error: conflicting types for 'auide_ddma_rx_callback' include2/asm/mach-au1x00/au1xxx_ide.h:176: error: previous declaration of 'auide_ddma_rx_callback' was here Signed-off-by:
Manuel Lauss <mano@roarinelk.homelinux.net> Signed-off-by:
Ralf Baechle <ralf@linux-mips.org>
-
Thiemo Seufer authored
Removing flush_icache_page a while ago broke SB1 which was using an empty flush_data_cache_page function. This glues things well enough so a more efficient but also more intrusive solution can be found later. Signed-Off-By:
Thiemo Seufer <ths@networkno.de> Signed-off-by:
-
Linus Torvalds authored
Not all graphic page remappers support physical addresses over the 4GB mark for remapping, so while some do (the AMD64 GART always did, and I just fixed the i965 to do so properly), we're safest off just forcing GFP_DMA32 allocations to make sure graphics pages get allocated in the low 32-bit address space by default. AGP sub-drivers that really care, and can do better, could just choose to implement their own allocator (or we could add another "64-bit safe" default allocator for their use), but quite frankly, you're not likely to care in practice. So for now, this trivial change means that we won't be allocating pages that we can't map correctly by mistake on x86-64. [ On traditional 32-bit x86, this could never happen, because GFP_KERNEL would never allocate any highmem memory anyway ] Acked-by:
Andi Kleen <ak@suse.de> Acked-by:
-
Kristoffer Ericson authored
Adding myself to the MAINTAINERS file. Signed-off-by:
Kristoffer Ericson <Kristoffer_e1@hotmail.com> Signed-off-by:
Russell King <rmk+kernel@arm.linux.org.uk>
-
Dan Williams authored
/* * Note: Drivers should NOT use this function directly, as it will break * platforms with CONFIG_DMABOUNCE. * Use the driver DMA support - see dma-mapping.h (dma_sync_*) */ Signed-off-by:
Dan Williams <dan.j.williams@intel.com> Signed-off-by:
-
Linus Torvalds authored
This introduces a i965-specific "mask_memory()" function that knows about the extended physical addresses that the i965 supports. This allows us to correctly map in physical memory in the >4GB range into the GTT. Also simplify/clean-up the i965 case for the aperture sizing by just returning the fixed 512kB size from "fetch_size()". We don't really care that not all of the aperture may be visible - the only thing that cares about the aperture size is the Intel "stolen memory" calculation, which depends on the fixed size. Cc: Keith Packard <keithp@keithp.com> Cc: Eric Anholt <eric@anholt.net> Cc: Dave Jones <davej@redhat.com> Signed-off-by: -
Linus Torvalds authored
This reverts commit f72fa707, and solves the problem that it tried to fix by simply making "__do_IRQ()" call the note_interrupt() function without the lock held, the way everybody else does. It should be noted that all interrupt handling code must never allow the descriptor actors to be entered "recursively" (that's why we do all the magic IRQ_PENDING stuff in the first place), so there actually is exclusion at that much higher level, even in the absense of locking. Acked-by:
Vivek Goyal <vgoyal@in.ibm.com> Acked-by:
Pavel Emelianov <xemul@openvz.org> Cc: Andrew Morton <akpm@osdl.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: Adrian Bunk <bunk@stusta.de> Signed-off-by:
-
Linus Torvalds authored
* 'merge' of master.kernel.org:/pub/scm/linux/kernel/git/paulus/powerpc: [POWERPC] Fix ucc_geth of_device discovery on mpc832x [POWERPC] Revert "[POWERPC] Add powerpc get/set_rtc_time interface to new generic rtc class" [POWERPC] Revert "[POWERPC] Enable generic rtc hook for the MPC8349 mITX"
-
Linus Torvalds authored
* master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6: [TG3]: Add missing unlock in tg3_open() error path. [IPV6]: Fix address/interface handling in UDP and DCCP, according to the scoping architecture. [IRDA]: Lockdep fix. [BLUETOOTH]: Fix unaligned access in hci_send_to_sock. [XFRM]: nlmsg length not computed correctly in the presence of subpolicies [XFRM]: Sub-policies broke policy events [IGMP]: Fix IGMPV3_EXP() normalization bit shift value. [Bluetooth] Ignore L2CAP config requests on disconnect [Bluetooth] Always include MTU in L2CAP config responses [Bluetooth] Check if RFCOMM session is still attached to the TTY [Bluetooth] Handling pending connect attempts after inquiry [Bluetooth] Attach low-level connections to the Bluetooth bus [IPV6] IP6TUNNEL: Add missing nf_reset() on input path. [IPV6] IP6TUNNEL: Delete all tunnel device when unloading module. [IPV6] ROUTE: Do not enable router reachability probing in router mode. [IPV6] ROUTE: Prefer reachable nexthop only if the caller requests. [IPV6] ROUTE: Try to use router which is not known unreachable.
-
