This patch fixes a race condition between two functions that try to access
the same inode. Since the i_mutex lock is held and released separately
in the two functions, there may be the possibility that a violation is
not correctly detected.

Suppose there are two processes, A (reader) and B (writer), if the
following sequence happens:

A: ima_rdwr_violation_check()
B: ima_rdwr_violation_check()
B: process_measurement()
B: starts writing the inode
A: process_measurement()

the ToMToU violation (a reader may be accessing a content different from
that measured, due to a concurrent modification by a writer) will not be
detected. To avoid this issue, the violation check and the measurement
must be done atomically.

This patch fixes the problem by moving the violation check inside
process_measurement() when the i_mutex lock is held. Differently from
the old code, the violation check is executed also for the MMAP_CHECK
hook (other than for FILE_CHECK). This allows to detect ToMToU violations
that are possible because shared libraries can be opened for writing
while they are in use (according to the output of 'man mmap', the mmap()
flag MAP_DENYWRITE is ignored).

Changes in v5 (Roberto Sassu):
* get iint if action is not zero
* exit process_measurement() after the violation check if action is zero
* reverse order process_measurement() exit cleanup (Mimi)

Changes in v4 (Dmitry Kasatkin):
* iint allocation is done before calling ima_rdrw_violation_check()
  (Suggested-by Mimi)
* do not check for violations if the policy does not contain 'measure'
  rules (done by Roberto Sassu)

Changes in v3 (Dmitry Kasatkin):
* no violation checking for MMAP_CHECK function in this patch
* remove use of filename from violation
* removes checking if ima is enabled from ima_rdrw_violation_check
* slight style change
Suggested-by: Dmitry Kasatkin <d.kasatkin@samsung.com>
Signed-off-by: Roberto Sassu <roberto.sassu@polito.it>
Signed-off-by: Dmitry Kasatkin <d.kasatkin@samsung.com>
Signed-off-by: Mimi Zohar <zohar@linux.vnet.ibm.com>

This patch introduces the new variable 'ima_policy_flag', whose bits
are set depending on the action of the current policy rules. Only the
flags IMA_MEASURE, IMA_APPRAISE and IMA_AUDIT are set.

The new variable will be used to improve performance by skipping the
unnecessary execution of IMA code if the policy does not contain rules
with the above actions.

Changes in v6 (Roberto Sassu)
* do not check 'ima_initialized' before calling ima_update_policy_flag()
  in ima_update_policy() (suggested by Dmitry)
* calling ima_update_policy_flag() moved to init_ima to co-locate with
  ima_initialized (Dmitry)
* add/revise comments (Mimi)

Changes in v5 (Roberto Sassu)
* reset IMA_APPRAISE flag in 'ima_policy_flag' if 'ima_appraise' is set
  to zero (reported by Dmitry)
* update 'ima_policy_flag' only if IMA initialization is successful
  (suggested by Mimi and Dmitry)
* check 'ima_policy_flag' instead of 'ima_initialized'
  (suggested by Mimi and Dmitry)
Signed-off-by: Roberto Sassu <roberto.sassu@polito.it>
Signed-off-by: Dmitry Kasatkin <d.kasatkin@samsung.com>
Signed-off-by: Mimi Zohar <zohar@linux.vnet.ibm.com>

This patch modifies ima_add_boot_aggregate() to return an error code.
This way we can determine if all the initialization procedures have
been executed successfully.
Signed-off-by: Roberto Sassu <roberto.sassu@polito.it>
Signed-off-by: Mimi Zohar <zohar@linux.vnet.ibm.com>

The kernel boot parameter "ima_appraise" currently defines 'off',
'enforce' and 'fix' modes.  When designing a policy and labeling
the system, access to files are either blocked in the default
'enforce' mode or automatically fixed in the 'fix' mode.  It is
beneficial to be able to run the system in a logging only mode,
without fixing it, in order to properly analyze the system. This
patch adds a 'log' mode to run the system in a permissive mode and
log the appraisal results.
Signed-off-by: Dmitry Kasatkin <d.kasatkin@samsung.com>
Signed-off-by: Mimi Zohar <zohar@linux.vnet.ibm.com>

ima_init() is used as a single place for all initializations.
Experimental keyring patches used the 'late_initcall' which was
co-located with the late_initcall(init_ima). When the late_initcall
for the keyring initialization was abandoned, initialization moved
to init_ima, though it would be more logical to move it to ima_init,
where the rest of the initialization is done. This patch moves the
keyring initialization to ima_init() as a preparatory step for
loading the keys which will be added to ima_init() in following
patches.
Signed-off-by: Dmitry Kasatkin <d.kasatkin@samsung.com>
Signed-off-by: Mimi Zohar <zohar@linux.vnet.ibm.com>

Merge branch 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/zohar/linux-integrity into next

The kernel print macros use the KBUILD_MODNAME, which is initialized
to the module name. The current integrity/Makefile makes every file
as its own module, so pr_xxx messages are prefixed with the file name
instead of the module.  Similar to the evm/Makefile and ima/Makefile,
this patch fixes the integrity/Makefile to use the single name
'integrity'.
Signed-off-by: Dmitry Kasatkin <d.kasatkin@samsung.com>
Signed-off-by: Mimi Zohar <zohar@linux.vnet.ibm.com>

The integrity subsystem has lots of options and takes more than
half of the security menu.  This patch consolidates the options
under "integrity", which are hidden if not enabled.  This change
does not affect existing configurations.  Re-configuration is not
needed.

Changes v4:
- no need to change "integrity subsystem" to menuconfig as
options are hidden, when not enabled. (Mimi)
- add INTEGRITY Kconfig help description

Changes v3:
- dependency to INTEGRITY removed when behind 'if INTEGRITY'

Changes v2:
- previous patch moved integrity out of the 'security' menu.
  This version keeps integrity as a security option (Mimi).
Signed-off-by: Dmitry Kasatkin <d.kasatkin@samsung.com>
Signed-off-by: Mimi Zohar <zohar@linux.vnet.ibm.com>

For better visual appearance it is better to co-locate
asymmetric key options together with signature support.
Signed-off-by: Dmitry Kasatkin <d.kasatkin@samsung.com>
Signed-off-by: Mimi Zohar <zohar@linux.vnet.ibm.com>

IMA uses only one template. This patch initializes only required
template to avoid unnecessary memory allocations.
Signed-off-by: Dmitry Kasatkin <d.kasatkin@samsung.com>
Reviewed-by: Roberto Sassu <roberto.sassu@polito.it>
Signed-off-by: Mimi Zohar <zohar@linux.vnet.ibm.com>

In all cases except ima_bprm_check() the filename was not defined
and ima_d_path() was used to find the full path.  Unfortunately,
the bprm filename is a relative pathname (eg. ./<dir>/filename).

ima_bprm_check() selects between bprm->interp and bprm->filename.
The following dump demonstrates the differences between using
filename and interp.

bprm->filename
 filename: ./foo.sh, pathname: /root/bin/foo.sh
 filename: ./foo.sh, pathname: /bin/dash

bprm->interp
 filename: ./foo.sh, pathname: /root/bin/foo.sh
 filename: /bin/sh, pathname: /bin/dash

In both cases the pathnames are currently the same.  This patch
removes usage of filename and interp in favor of d_absolute_path.

Changes v3:
- 11 extra bytes for "deleted" not needed (Mimi)
- purpose "replace relative bprm filename with full pathname" (Mimi)

Changes v2:
- use d_absolute_path() instead of d_path to work in chroot environments.
Signed-off-by: Dmitry Kasatkin <d.kasatkin@samsung.com>
Signed-off-by: Mimi Zohar <zohar@linux.vnet.ibm.com>

ima_get_action() sets the "action" flags based on policy.
Before collecting, measuring, appraising, or auditing the
file, the "action" flag is updated based on the cached
iint->flags.

This patch removes the subsequent unnecessary appraisal
test in ima_appraise_measurement().
Signed-off-by: Dmitry Kasatkin <d.kasatkin@samsung.com>
Signed-off-by: Mimi Zohar <zohar@linux.vnet.ibm.com>

Add missing keywords to the function definition to cleanup
to discard initialization code.
Signed-off-by: Dmitry Kasatkin <d.kasatkin@samsung.com>
Reviewed-by: Roberto Sassu <roberto.sassu@polito.it>
Signed-off-by: Mimi Zohar <zohar@linux.vnet.ibm.com>

'function' variable value can be changed instead of
allocating extra '_func' variable.
Signed-off-by: Dmitry Kasatkin <d.kasatkin@samsung.com>
Signed-off-by: Mimi Zohar <zohar@linux.vnet.ibm.com>

Precede bit testing before string comparison makes code
faster. Also refactor statement as a single line pointer
assignment. Logic is following: we set 'xattr_ptr' to read
xattr value when we will do appraisal or in any case when
measurement template is other than 'ima'.
Signed-off-by: Dmitry Kasatkin <d.kasatkin@samsung.com>
Signed-off-by: Mimi Zohar <zohar@linux.vnet.ibm.com>

Commit f381c272 "integrity: move ima inode integrity data management"
(re)moved few functions but left their declarations in header files.
This patch removes them and also removes duplicated declaration of
integrity_iint_find().

Commit c7de7adc "ima: remove unused cleanup functions".  This patch
removes these definitions as well.
Signed-off-by: Dmitry Kasatkin <d.kasatkin@samsung.com>
Signed-off-by: Mimi Zohar <zohar@linux.vnet.ibm.com>

If file has IMA signature, IMA in enforce mode, but key is missing
then file access is blocked and single error message is printed.

If IMA appraisal is enabled in fix mode, then system runs as usual
but might produce tons of 'Request for unknown key' messages.

This patch switches 'pr_warn' to 'pr_err_ratelimited'.
Signed-off-by: Dmitry Kasatkin <d.kasatkin@samsung.com>
Signed-off-by: Mimi Zohar <zohar@linux.vnet.ibm.com>

Empty files and missing xattrs do not guarantee that a file was
just created.  This patch passes FILE_CREATED flag to IMA to
reliably identify new files.
Signed-off-by: Dmitry Kasatkin <d.kasatkin@samsung.com>
Signed-off-by: Mimi Zohar <zohar@linux.vnet.ibm.com>
Cc: <stable@vger.kernel.org>  3.14+

Unless an LSM labels a file during d_instantiate(), newly created
files are not labeled with an initial security.evm xattr, until
the file closes.  EVM, before allowing a protected, security xattr
to be written, verifies the existing 'security.evm' value is good.
For newly created files without a security.evm label, this
verification prevents writing any protected, security xattrs,
until the file closes.

Following is the example when this happens:
fd = open("foo", O_CREAT | O_WRONLY, 0644);
setxattr("foo", "security.SMACK64", value, sizeof(value), 0);
close(fd);

While INTEGRITY_NOXATTRS status is handled in other places, such
as evm_inode_setattr(), it does not handle it in all cases in
evm_protect_xattr().  By limiting the use of INTEGRITY_NOXATTRS to
newly created files, we can now allow setting "protected" xattrs.

Changelog:
- limit the use of INTEGRITY_NOXATTRS to IMA identified new files
Signed-off-by: Dmitry Kasatkin <d.kasatkin@samsung.com>
Signed-off-by: Mimi Zohar <zohar@linux.vnet.ibm.com>
Cc: <stable@vger.kernel.org>  3.14+

On ima_file_free(), newly created empty files are not labeled with
an initial security.ima value, because the iversion did not change.
Commit dff6efc3 "fs: fix iversion handling" introduced a change in
iversion behavior.  To verify this change use the shell command:

  $ (exec >foo)
  $ getfattr -h -e hex -d -m security foo

This patch defines the IMA_NEW_FILE flag.  The flag is initially
set, when IMA detects that a new file is created, and subsequently
checked on the ima_file_free() hook to set the initial security.ima
value.
Signed-off-by: Dmitry Kasatkin <d.kasatkin@samsung.com>
Signed-off-by: Mimi Zohar <zohar@linux.vnet.ibm.com>
Cc: <stable@vger.kernel.org>  3.14+

This patch fixes a bug, where evm_verify_hmac() returns INTEGRITY_PASS
if inode->i_op->getxattr() returns an error in evm_find_protected_xattrs.
Signed-off-by: Dmitry Kasatkin <d.kasatkin@samsung.com>

This adds two reviewers to the seccomp tree.
Signed-off-by: Kees Cook <keescook@chromium.org>

Printing in base signature handling should have a prefix, so set pr_fmt().
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: James Morris <james.l.morris@oracle.com>

This patch fixes checkpatch 'return' warnings introduced with commit
9819cf25 "checkpatch: warn on unnecessary void function return statements".

Use scripts/checkpatch.pl --file security/integrity/evm/evm_main.c
to produce the warnings.
Signed-off-by: Dmitry Kasatkin <d.kasatkin@samsung.com>
Signed-off-by: Mimi Zohar <zohar@linux.vnet.ibm.com>

3.16 commit aad4f8bb
'switch simple generic_file_aio_read() users to ->read_iter()'
replaced ->aio_read with ->read_iter in most of the file systems
and introduced new_sync_read() as a replacement for do_sync_read().

Most of file systems set '->read' and ima_kernel_read is not affected.
When ->read is not set, this patch adopts fallback call changes from the
vfs_read.
Signed-off-by: Dmitry Kasatkin <d.kasatkin@samsung.com>
Signed-off-by: Mimi Zohar <zohar@linux.vnet.ibm.com>
Cc: <stable@vger.kernel.org>  3.16+

This patch fixes the case where the file's signature/hash xattr contains
an invalid hash algorithm.  Although we can not verify the xattr, we still
need to measure the file.  Use the default IMA hash algorithm.
Signed-off-by: Dmitry Kasatkin <d.kasatkin@samsung.com>
Signed-off-by: Mimi Zohar <zohar@linux.vnet.ibm.com>

The patch 3bcced39: "ima: use ahash API for file hash
calculation" from Feb 26, 2014, leads to the following static checker
warning:

security/integrity/ima/ima_crypto.c:204 ima_alloc_atfm()
         error: buffer overflow 'hash_algo_name' 17 <= 17

Unlike shash tfm memory, which is allocated on initialization, the
ahash tfm memory allocation is deferred until needed.

This patch fixes the case where ima_ahash_tfm has not yet been
allocated and the file's signature/hash xattr contains an invalid hash
algorithm.  Although we can not verify the xattr, we still need to
measure the file.  Use the default IMA hash algorithm.

Changelog:
- set valid algo before testing tfm - based on Dmitry's comment
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Mimi Zohar <zohar@linux.vnet.ibm.com>
Signed-off-by: Dmitry Kasatkin <d.kasatkin@samsung.com>

Renaming an unused formal parameter in the static inline function
security_inode_init_security eliminates many W=2 warnings.
Signed-off-by: Mark Rustad <mark.d.rustad@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: James Morris <james.l.morris@oracle.com>

Merge tag 'keys-next-20140805' of git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-fs into next

Need to export x509_request_asymmetric_key() so that PKCS#7 can use it if
compiled as a module.
Reported-by: James Morris <jmorris@namei.org>
Signed-off-by: David Howells <dhowells@redhat.com>

Historically the NetLabel LSM secattr catmap functions and data
structures have had very long names which makes a mess of the NetLabel
code and anyone who uses NetLabel.  This patch renames the catmap
functions and structures from "*_secattr_catmap_*" to just "*_catmap_*"
which improves things greatly.

There are no substantial code or logic changes in this patch.
Signed-off-by: Paul Moore <pmoore@redhat.com>
Tested-by: Casey Schaufler <casey@schaufler-ca.com>

The two NetLabel LSM secattr catmap walk functions didn't handle
certain edge conditions correctly, causing incorrect security labels
to be generated in some cases.  This patch corrects these problems and
converts the functions to use the new _netlbl_secattr_catmap_getnode()
function in order to reduce the amount of repeated code.

Cc: stable@vger.kernel.org
Signed-off-by: Paul Moore <pmoore@redhat.com>
Tested-by: Casey Schaufler <casey@schaufler-ca.com>

The NetLabel secattr catmap functions, and the SELinux import/export
glue routines, were broken in many horrible ways and the SELinux glue
code fiddled with the NetLabel catmap structures in ways that we
probably shouldn't allow.  At some point this "worked", but that was
likely due to a bit of dumb luck and sub-par testing (both inflicted
by yours truly).  This patch corrects these problems by basically
gutting the code in favor of something less obtuse and restoring the
NetLabel abstractions in the SELinux catmap glue code.

Everything is working now, and if it decides to break itself in the
future this code will be much easier to debug than the code it
replaces.

One noteworthy side effect of the changes is that it is no longer
necessary to allocate a NetLabel catmap before calling one of the
NetLabel APIs to set a bit in the catmap.  NetLabel will automatically
allocate the catmap nodes when needed, resulting in less allocations
when the lowest bit is greater than 255 and less code in the LSMs.

Cc: stable@vger.kernel.org
Reported-by: Christian Evans <frodox@zoho.com>
Signed-off-by: Paul Moore <pmoore@redhat.com>
Tested-by: Casey Schaufler <casey@schaufler-ca.com>

The NetLabel category (catmap) functions have a problem in that they
assume categories will be set in an increasing manner, e.g. the next
category set will always be larger than the last.  Unfortunately, this
is not a valid assumption and could result in problems when attempting
to set categories less than the startbit in the lowest catmap node.
In some cases kernel panics and other nasties can result.

This patch corrects the problem by checking for this and allocating a
new catmap node instance and placing it at the front of the list.

Cc: stable@vger.kernel.org
Reported-by: Christian Evans <frodox@zoho.com>
Signed-off-by: Paul Moore <pmoore@redhat.com>
Tested-by: Casey Schaufler <casey@schaufler-ca.com>

X.509 certificate issuer and subject fields are mandatory fields in the ASN.1
and so their existence needn't be tested for.  They are guaranteed to end up
with an empty string if the name material has nothing we can use (see
x509_fabricate_name()).
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: David Howells <dhowells@redhat.com>
Acked-by: Vivek Goyal <vgoyal@redhat.com>

Instead of looping by ourselves we may use %*phN specifier to dump a small
buffer.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Jason Gunthorpe <jgunthorpe@obsidianresearch.com>
[ PHuewe: removed now unused variable i ]
Signed-off-by: Peter Huewe <peterhuewe@gmx.de>

Some Atmel TPMs provide completely wrong timeouts from their
TPM_CAP_PROP_TIS_TIMEOUT query. This patch detects that and returns
new correct values via a DID/VID table in the TIS driver.

Tested on ARM using an AT97SC3204T FW version 37.16

Cc: <stable@vger.kernel.org>
[PHuewe: without this fix these 'broken' Atmel TPMs won't function on
older kernels]
Signed-off-by: "Berg, Christopher" <Christopher.Berg@atmel.com>
Signed-off-by: Jason Gunthorpe <jgunthorpe@obsidianresearch.com>
Signed-off-by: Peter Huewe <peterhuewe@gmx.de>

Regression in 41ab999c. Call to tpm_chip_put is missing. This
will cause TPM device driver not to unload if tmp_get_random()
is called.

Cc: <stable@vger.kernel.org> # 3.7+
Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Signed-off-by: Peter Huewe <peterhuewe@gmx.de>

Properly clean the sysfs entries in the error path

Cc: <stable@vger.kernel.org>
Reported-by: Dmitry Kasatkin <dmitry.kasatkin@gmail.com>
Signed-off-by: Stefan Berger <stefanb@linux.vnet.ibm.com>
Reviewed-by: Jason Gunthorpe <jgunthorpe@obsidianresearch.com>
Signed-off-by: Peter Huewe <peterhuewe@gmx.de>