- 25 Jun, 2006 40 commits
-
-
Ian Kent authored
I've found a case where invalid dentrys in a mount tree, waiting to be cleaned up by d_invalidate, prevent the expected expire. In this case dentrys created during a lookup for which a mount fails or has no entry in the mount map contribute to the d_count of the parent dentry. These dentrys may not be invalidated prior to comparing the interanl usage count of valid autofs dentrys against the dentry d_count which makes a mount tree appear busy so it doesn't expire. Signed-off-by:
Ian Kent <raven@themaw.net> Signed-off-by:
Andrew Morton <akpm@osdl.org> Signed-off-by:
Linus Torvalds <torvalds@osdl.org>
-
Eric Sesterhenn authored
coverity choked at another two !tty checks, in places where tty can never be NULL. Since it removes some code we should remove these checks. (Coverity ids #763,#762) Signed-off-by Eric Sesterhenn <snakebyte@gmx.de> Signed-off-by:
-
Eric Sesterhenn authored
coverity choked at two !tty checks, in places where tty can never be NULL. Since it removes some code we should remove these checks. (Coverity ids #763,#762) [akpm@osdl.org: even cleaner!] Signed-off-by:
Eric Sesterhenn <snakebyte@gmx.de> Acked-by:
Alan Cox <alan@redhat.com> Signed-off-by:
-
Anton Blanchard authored
If futexes are disabled we fail to link on ppc64. Signed-off-by:
Anton Blanchard <anton@samba.org> Cc: <stable@kernel.org> Signed-off-by:
-
Paul E. McKenney authored
An update to the RCU documentation calling out the self-limiting-update-rate advantages of synchronize_rcu(), and describing how to use call_rcu() in a way that results in self-limiting updates. Self-limiting updates are important to avoiding RCU-induced OOM in face of denial-of-service attacks. Signed-off-by:
Paul E. McKenney <paulmck@us.ibm.com> Signed-off-by:
-
Wu Fengguang authored
Backoff readahead size exponentially on I/O error. Michael Tokarev <mjt@tls.msk.ru> described the problem as: [QUOTE] Suppose there's a CD-rom with a scratch/etc, one sector is unreadable. In order to "fix" it, one have to read it and write to another CD-rom, or something.. or just ignore the error (if it's just a skip in a video stream). Let's assume the unreadable block is number U. But current behavior is just insane. An application requests block number N, which is before U. Kernel tries to read-ahead blocks N..U. Cdrom drive tries to read it, re-read it.. for some time. Finally, when all the N..U-1 blocks are read, kernel returns block number N (as requested) to an application, successefully. Now an app requests block number N+1, and kernel tries to read blocks N+1..U+1. Retrying again as in previous step. And so on, up to when an app requests block number U-1. And when, finally, it requests block U, it receives read error. So, kernel currentry tries to re-read the same failing block as many times as the current readahead value (256 (times?) by default). This whole process already killed my cdrom drive (I posted about it to LKML several months ago) - literally, the drive has fried, and does not work anymore. Ofcourse that problem was a bug in firmware (or whatever) of the drive *too*, but.. main problem with that is current readahead logic as described above. [/QUOTE] Which was confirmed by Jens Axboe <axboe@suse.de>: [QUOTE] For ide-cd, it tends do only end the first part of the request on a medium error. So you may see a lot of repeats :/ [/QUOTE] With this patch, retries are expected to be reduced from, say, 256, to 5. [akpm@osdl.org: cleanups] Signed-off-by:
Wu Fengguang <wfg@mail.ustc.edu.cn> Signed-off-by:
-
David Woodhouse authored
In the error case, add_msg() gets called from timer functions, so should be using GFP_ATOMIC instead of GFP_KERNEL. Ref: http://bugzilla.kernel.org/show_bug.cgi?id=6659. Thanks to Christian Werner <chw@ch-werner.de> for reporting, and for the initial fix. Signed-off-by:
David Woodhouse <dwmw2@infradead.org> Signed-off-by:
-
Randy Dunlap authored
Priority: not critical. Mark 3 functions __init. Saves a little memory. This makes these functions' calls to AdvWaitEEPCmd() (which is __init) be clean (i.e., eliminates text -> init -> text call chain). Fix multiple section mismatch warnings: WARNING: drivers/scsi/advansys.o - Section mismatch: reference to .init.text: from .text between 'AdvSet3550EEPConfig' (at offset 0x7a22) and 'AdvSet38C0800EEPConfig' WARNING: drivers/scsi/advansys.o - Section mismatch: reference to .init.text: from .text between 'AdvSet3550EEPConfig' (at offset 0x7a4e) and 'AdvSet38C0800EEPConfig' WARNING: drivers/scsi/advansys.o - Section mismatch: reference to .init.text: from .text between 'AdvSet3550EEPConfig' (at offset 0x7a79) and 'AdvSet38C0800EEPConfig' WARNING: drivers/scsi/advansys.o - Section mismatch: reference to .init.text: from .text between 'AdvSet3550EEPConfig' (at offset 0x7aa2) and 'AdvSet38C0800EEPConfig' WARNING: drivers/scsi/advansys.o - Section mismatch: reference to .init.text: from .text between 'AdvSet3550EEPConfig' (at offset 0x7abb) and 'AdvSet38C0800EEPConfig' WARNING: drivers/scsi/advansys.o - Section mismatch: reference to .init.text: from .text between 'AdvSet38C0800EEPConfig' (at offset 0x7ae0) and 'AdvSet38C1600EEPConfig' WARNING: drivers/scsi/advansys.o - Section mismatch: reference to .init.text: from .text between 'AdvSet38C0800EEPConfig' (at offset 0x7b0c) and 'AdvSet38C1600EEPConfig' WARNING: drivers/scsi/advansys.o - Section mismatch: reference to .init.text: from .text between 'AdvSet38C0800EEPConfig' (at offset 0x7b37) and 'AdvSet38C1600EEPConfig' WARNING: drivers/scsi/advansys.o - Section mismatch: reference to .init.text: from .text between 'AdvSet38C0800EEPConfig' (at offset 0x7b60) and 'AdvSet38C1600EEPConfig' WARNING: drivers/scsi/advansys.o - Section mismatch: reference to .init.text: from .text between 'AdvSet38C0800EEPConfig' (at offset 0x7b79) and 'AdvSet38C1600EEPConfig' WARNING: drivers/scsi/advansys.o - Section mismatch: reference to .init.text: from .text between 'AdvSet38C1600EEPConfig' (at offset 0x7b9e) and 'AdvExeScsiQueue' WARNING: drivers/scsi/advansys.o - Section mismatch: reference to .init.text: from .text between 'AdvSet38C1600EEPConfig' (at offset 0x7bca) and 'AdvExeScsiQueue' WARNING: drivers/scsi/advansys.o - Section mismatch: reference to .init.text: from .text between 'AdvSet38C1600EEPConfig' (at offset 0x7bf5) and 'AdvExeScsiQueue' WARNING: drivers/scsi/advansys.o - Section mismatch: reference to .init.text: from .text between 'AdvSet38C1600EEPConfig' (at offset 0x7c1e) and 'AdvExeScsiQueue' WARNING: drivers/scsi/advansys.o - Section mismatch: reference to .init.text: from .text between 'AdvSet38C1600EEPConfig' (at offset 0x7c37) and 'AdvExeScsiQueue' Signed-off-by:
Randy Dunlap <rdunlap@xenotime.net> Cc: James Bottomley <James.Bottomley@steeleye.com> Signed-off-by:
-
Randy Dunlap authored
Priority: tossup. In theory some of these (previously) __init functions could be called after init, but that problem has not been observed AFAIK. There were 2 cases of cleanup_module() (module_exit) calling __init functions (clear_requested_irq() & have_requested_irq()). These are more serious, but still not observed AFAIK. Fix sections mismatch: WARNING: drivers/char/ip2/ip2main.o - Section mismatch: reference to .init.text: from .text between 'cleanup_module' (at offset 0x228b) and 'ip2_loadmain' WARNING: drivers/char/ip2/ip2main.o - Section mismatch: reference to .init.text: from .text between 'cleanup_module' (at offset 0x22ae) and 'ip2_loadmain' WARNING: drivers/char/ip2/ip2main.o - Section mismatch: reference to .init.text: from .text between 'ip2_loadmain' (at offset 0x2501) and 'set_irq' WARNING: drivers/char/ip2/ip2main.o - Section mismatch: reference to .init.text: from .text between 'ip2_loadmain' (at offset 0x25de) and 'set_irq' WARNING: drivers/char/ip2/ip2main.o - Section mismatch: reference to .init.text: from .text between 'ip2_loadmain' (at offset 0x2698) and 'set_irq' WARNING: drivers/char/ip2/ip2main.o - Section mismatch: reference to .init.text: from .text between 'ip2_loadmain' (at offset 0x2922) and 'set_irq' WARNING: drivers/char/ip2/ip2main.o - Section mismatch: reference to .init.text: from .text between 'ip2_loadmain' (at offset 0x299e) and 'set_irq' Signed-off-by:
-
Randy Dunlap authored
Priority: not critical. Make __mcdx_init() __init and static. Saves a little memory. Fix section mismatch warning and make the function static while there: WARNING: drivers/cdrom/mcdx.o - Section mismatch: reference to .init.text: from .text between 'init_module' (at offset 0x8be) and 'mcdx_transfer' Signed-off-by:
-
Randy Dunlap authored
Priority: not critical. Change 3 functions from __init to __devinit. Could be an init/probe problem in theory, but not observed, so not high priority IMO. Fix section mismatch warnings: WARNING: drivers/video/tridentfb.o - Section mismatch: reference to .init.text: from .text between 'trident_pci_probe' (at offset 0x1aad) and 'trident_pci_remove' WARNING: drivers/video/tridentfb.o - Section mismatch: reference to .init.text: from .text between 'trident_pci_probe' (at offset 0x1b22) and 'trident_pci_remove' WARNING: drivers/video/tridentfb.o - Section mismatch: reference to .init.text: from .text between 'trident_pci_probe' (at offset 0x1b31) and 'trident_pci_remove' Signed-off-by:
-
Randy Dunlap authored
netdev->set_config can be called at any time, so these references to __initdata would be a real problem. However, problem has not been observed AFAIK. Fix section mismatch warnings: WARNING: drivers/net/wan/sdla.o - Section mismatch: reference to .init.data: from .text between 'sdla_set_config' (at offset 0x1b8e) and 'sdla_stats' WARNING: drivers/net/wan/sdla.o - Section mismatch: reference to .init.data: from .text between 'sdla_set_config' (at offset 0x1e76) and 'sdla_stats' Signed-off-by:
-
Peter Staubach authored
In the course of trying to track down a bug where a file mtime was not being updated correctly, it was discovered that the m/ctime updates were not quite being handled correctly for ftruncate() calls. Quoth SUSv3: open(2): If O_TRUNC is set and the file did previously exist, upon successful completion, open() shall mark for update the st_ctime and st_mtime fields of the file. truncate(2): Upon successful completion, if the file size is changed, this function shall mark for update the st_ctime and st_mtime fields of the file, and the S_ISUID and S_ISGID bits of the file mode may be cleared. ftruncate(2): Upon successful completion, if fildes refers to a regular file, the ftruncate() function shall mark for update the st_ctime and st_mtime fields of the file and the S_ISUID and S_ISGID bits of the file mode may be cleared. If the ftruncate() function is unsuccessful, the file is unaffected. The open(O_TRUNC) and truncate cases were being handled correctly, but the ftruncate case was being handled like the truncate case. The semantics of truncate and ftruncate don't quite match, so ftruncate needs to be handled slightly differently. The attached patch addresses this issue for ftruncate(2). My thanx to Stephen Tweedie and Trond Myklebust for their help in understanding the situation and semantics. Signed-off-by:Peter Staubach <staubach@redhat.com> Cc: "Stephen C. Tweedie" <sct@redhat.com> Cc: Trond Myklebust <trond.myklebust@fys.uio.no> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Christoph Hellwig <hch@lst.de> Signed-off-by:
-
akpm@osdl.org authored
I'm testing glibc on MIPS64, little-endian, N32, O32 and N64 multilibs. Among the NPTL test failures seen are some arising from sigsuspend problems for N32: it blocks the wrong signals, so SIGCANCEL (SIGRTMIN) is blocked despite glibc's carefully excluding it from sets of signals to block. Specifically, testing suggests it blocks signal N^32 instead of signal N, so (in the example tested) blocking SIGUSR1 (17) blocks signal 49 instead. glibc's sigset_t uses an array of unsigned long, as does the kernel. In both cases, signal N+1 is represented as (1UL << (N % (8 * sizeof (unsigned long)))) in word number (N / (8 * sizeof (unsigned long))). Thus the N32 glibc uses an array of 32-bit words and the N64 kernel uses an array of 64-bit words. For little-endian, the layout is the same, with signals 1-32 in the first 4 bytes, signals 33-64 in the second, etc.; for big-endian, userspace has that layout while in the kernel each 8 bytes have the two halves swapped from the userspace layout. The N32 sigsuspend syscall uses sigset_from_compat to convert the userspace sigset to kernel format. If __COMPAT_ENDIAN_SWAP__ is *not* set, this uses logic of the form set->sig[0] = compat->sig[0] | (((long)compat->sig[1]) << 32 ) to convert the userspace sigset to a kernel one. This looks correct to me for both big and little endian, given that in userspace compat->sig[1] will represent signals 33-64, and so will the high 32 bits of set->sig[0] in the kernel. If however __COMPAT_ENDIAN_SWAP__ *is* set, as it is for __MIPSEL__, it uses set->sig[0] = compat->sig[1] | (((long)compat->sig[0]) << 32 ); which seems incorrect for both big and little endian, and would explain the observed symptoms. This code is the only use of __COMPAT_ENDIAN_SWAP__, so if incorrect then that macro serves no purpose, in which case something like the following patch would seem appropriate to remove it. Signed-off-by:
Joseph Myers <joseph@codesourcery.com> Signed-off-by:
Ralf Baechle <ralf@linux-mips.org> Cc: Arnd Bergmann <arnd@arndb.de> Signed-off-by:
-
Johann Lombardi authored
The variables nlen and rlen are defined/initialized but not used in ext3_add_entry(). Signed-off-by:
Johann Lombardi <johann.lombardi@bull.net> Signed-off-by:
-
Florin Malita authored
__getname() may fail and return NULL (as pointed out by Coverity 437 & 1220). Signed-off-by:
Florin Malita <fmalita@gmail.com> Acked-by:
Eric Van Hensbergen <ericvh@gmail.com> Cc: <rminnich@lanl.gov> Cc: Latchesar Ionkov <lucho@ionkov.net> Signed-off-by:
-
Stephen Hemminger authored
The table is empty, why does it still exist? Signed-off-by:
Stephen Hemminger <shemminger@osdl.org> Signed-off-by:
-
Randy Dunlap authored
Finding "init_module" high stack usage problems is challenging when there are over 1600 "init_module" functions in the kernel tree, so make checkstack.pl print out the filename where the stack usage occurs. This is useful for code built as loadable modules. For built-in code, it just prints the kernel image file name, like "vmlinux". Examples: (before patch:) 0x0000000d callback: 1928 0xffffffff81678c09 huft_build: 1560 0x0018 init_module: 1512 (after patch:) 0x0000000d callback [divacapi]: 1928 0xffffffff81678c09 huft_build [vmlinux]: 1560 0x0018 init_module [hdaps]: 1512 Also change one if-series to use elsif to cut down on unneeded tests. Signed-off-by:
Joern Engel <joern@wh.fh-wedel.de> Signed-off-by:
-
Atsushi Nemoto authored
Add an RTC driver for the Dallas DS1742 RTC chip. [akpm@osdl.org: cleanups, compile fix] Signed-off-by:
Atsushi Nemoto <anemo@mba.ocn.ne.jp> Cc: Alessandro Zummo <a.zummo@towertech.it> Signed-off-by:
-
Atsushi Nemoto authored
Add an RTC driver for the Dallas DS1553 RTC chip. [akpm@osdl.org: cleanups, compile fix] Signed-off-by:
-
Andrew Morton authored
- whitespace fixes (80-col display) - one unneeded cast of void* Cc: Andrew Victor <andrew@sanpeople.com> Cc: Alessandro Zummo <a.zummo@towertech.it> Cc: Russell King <rmk@arm.linux.org.uk> Signed-off-by:
-
Andrew Victor authored
Adds support for the RTC integrated in the Atmel AT91RM9200 SoC. Driver was originally written for 2.4 by Rick Bronson. Then converted to 2.6 ARM RTC API by Steven Scholz. Now converted to the RTC class model. Signed-off-by:
Andrew Victor <andrew@sanpeople.com> Signed-off-by:
Alessandro Zummo <a.zummo@towertech.it> Cc: Russell King <rmk@arm.linux.org.uk> Signed-off-by:
-
Andrew Victor authored
RTC: Add exported function rtc_year_days() to calculate the tm_yday value. Signed-off-by:
-
Raphael Assenat authored
This patch adds support for the v3020 RTC from EM Microelectronic. The v3020 RTC is designed to be connected on a bus using only one data bit. Since any data bit may be used, it is necessary to specify this to the driver by passing a struct v3020_platform_data pointer (see include/linux/rtc-v3020.h) to the driver. Part of the following code comes from the kernel patchs produced by Compulab for their products. The original file (available here: http://raph.people.8d.com/misc/emv3020.c) was released under the terms of the GPL license. [akpm@osdl.org: cleanups] Signed-off-by:
Raphael Assenat <raph@raphnet.net> Cc: Alessandro Zummo <a.zummo@towertech.it> Signed-off-by:
-
Jean Delvare authored
Rtc driver documentation update * Mention the max-user-freq control file. * Add missing header in example code. Signed-off-by:
Jean Delvare <khali@linux-fr.org> Cc: Alessandro Zummo <a.zummo@towertech.it> Signed-off-by:
-
Raphael Assenat authored
Add support for the MAX6902 SPI RTC chip. Tested on a pxa2xx cpu. The compulab code comes from the kernel patch the produce for their cn-x255 board. (inside a zip file on the http://www.compulab.co.il/x255/html/x255-developer.htm) The original file (drivers/char/max6902.c) was GPL, which is of course an appropriate licence: /* * max6902.c * * Driver for MAX6902 RTC * * Copyright (C) 2004 Compulab Ltd. * * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 as * published by the Free Software Foundation. * * */ For reference, you can get the original file here: http://raph.people.8d.com/misc/max6902.c [akpm@osdl.org: cleanups] Signed-off-by:
-
Alessandro Zummo authored
Centralize CAP_SYS_XXX checks to avoid duplicate code and missing checks in the drivers. Signed-off-by:
-
Alessandro Zummo authored
Remove commented capability checks and add some others. Signed-off-by:
-
G. Liakhovetski authored
A port of the driver for the pcf8583 i2c rtc controller to the generic RTC framework by Alessandro Zummo. Based on drivers/acorn/char/{pcf8583.[hc],i2c.c}. Hopefully, acorn can be converted too to use this driver in the future. Signed-off-by:G. Liakhovetski <gl@dsa-ac.de> Signed-off-by:
-
Atsushi Nemoto authored
Import genrtc's RTC UIE emulation (CONFIG_GEN_RTC_X) to rtc-dev driver with slight adjustments/refinements. This makes UIE-less rtc drivers work better with programs doing read/poll on /dev/rtc, such as hwclock. This emulation should not harm rtc drivers with UIE support, since rtc_dev_ioctl() calls underlaying rtc driver's ioctl() first. Signed-off-by:
-
David Brownell authored
This is an "RTC-framework" driver for DS1307 and similar RTC chips, It should be a full replacement for the existing ds1337.c driver (using the older RTC glue), giving a net increase in the number of RTC chips that work out-of-the-box. There's a whole cluster of RTCs that are very similar, but the 1337 driver was a bit too picky to work with most of them. Still no support for RTC alarm IRQs (on chips that support them). Signed-off-by:
David Brownell <dbrownell@users.sourceforge.net> Signed-off-by:
James Chapman <jchapman@katalix.com> Signed-off-by:
-
Jesper Juhl authored
sysrq SAK is described as being something you should mistake for SAK from c2 compliant systems - whoops. What's meant is that it should *not* be mistaken as such. Signed-off-by:
Jesper Juhl <jesper.juhl@gmail.com> Signed-off-by:
-
Jan Engelhardt authored
Currently, enabling/disabling printk timestamps is only possible through reboot (bootparam) or recompile. I normally do not run with timestamps (since syslog handles that in a good manner), but for measuring small kernel delays (e.g. irq probing - see parport thread) I needed subsecond precision, but then again, just for some minutes rather than all kernel messages to come. The following patch adds a module_param() with which the timestamps can be en-/disabled in a live system through /sys/modules/printk/parameters/printk_time. Signed-off-by:
Jan Engelhardt <jengelh@gmx.de> Signed-off-by:
-
Wu Fengguang authored
In radix_tree_tag_get(), return normalized value of 0/1, as indicated by its comment. Signed-off-by:
-
Davide Libenzi authored
A few days ago Arjan signaled a lockdep red flag on epoll locks, and precisely between the epoll's device structure lock (->lock) and the wait queue head lock (->lock). Like I explained in another email, and directly to Arjan, this can't happen in reality because of the explicit check at eventpoll.c:592, that does not allow to drop an epoll fd inside the same epoll fd. Since lockdep is working on per-structure locks, it will never be able to know of policies enforced in other parts of the code. It was decided time ago of having the ability to drop epoll fds inside other epoll fds, that triggers a very trick wakeup operations (due to possibly reentrant callback-driven wakeups) handled by the ep_poll_safewake() function. While looking again at the code though, I noticed that all the operations done on the epoll's main structure wait queue head (->wq) are already protected by the epoll lock (->lock), so that locked-style functions can be used to manipulate the ->wq member. This makes both a lock-acquire save, and lockdep happy. Running totalmess on my dual opteron for a while did not reveal any problem so far: http://www.xmailserver.org/totalmess.cSigned-off-by:
Davide Libenzi <davidel@xmailserver.org> Cc: Arjan van de Ven <arjan@linux.intel.com> Cc: Ingo Molnar <mingo@elte.hu> Signed-off-by:
-
Alexey Dobriyan authored
Signed-off-by:
Alexey Dobriyan <adobriyan@gmail.com> Cc: Paul Clements <Paul.Clements@steeleye.com> Cc: Jens Axboe <axboe@suse.de> Cc: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by:
-
Valerie Henson authored
This patch makes EXT2_DEBUG work again. Due to lack of proper include file, EXT2_DEBUG was undefined in bitmap.c and ext2_count_free() is left out. Moved to balloc.c and removed bitmap.c entirely. Second, debug versions of ext2_count_free_{inodes/blocks} reacquires superblock lock. Moved lock into callers. Signed-off-by:Val Henson <val_henson@linux.intel.com> Signed-off-by:
-
Alexey Dobriyan authored
Why is it marked unused when in fact it's used? Signed-off-by:
-
Andrew Morton authored
On UP, this: cpumask_t mask = node_to_cpumask(numa_node_id()); for_each_cpu_mask(cpu, mask) does this: mm/readahead.c: In function `node_readahead_aging': mm/readahead.c:850: warning: unused variable `mask' which is unpleasantly fixed by this: Acked-by:Paul Jackson <pj@sgi.com> Signed-off-by:
-
H. Peter Anvin authored
Make makes sysctl non-optional unless EMBEDDED is set. There are a number of interfaces exposed via sysctl, enough that it has to be considered core kernel functionality at this point. Signed-off-by:
H. Peter Anvin <hpa@zytor.com> Signed-off-by:
-
