This one from Dave Jones, who read the Intel docs even
more.

into ppc970.osdl.org:/home/torvalds/v2.6/linux

It seems that on some OldWolrd macs, we don't get the OF stdout device,
thus the new set_preferred_console() dies at boot trying to dereference
a NULL pointer.

Trivial fix.

into ppc970.osdl.org:/home/torvalds/v2.6/linux

into pobox.com:/spare/repo/netdev-2.6/ALL

In 2.5.18 some minix-specific stuff was moved to the minix subdirectory
where it belonged.  However, a typo crept in, causing inode disk usage
to be incorrectly reported.  A few people have complained, but so far
not sufficiently loudly.
Signed-off-by: Andries Brouwer <Andries.Brouwer@cwi.nl>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

There are a couple of cache descriptors in the current Intel manuals
missing from our tables at least one of which appears in an actual
processor in the real world.

A silly bug prevented certain events from being used.

into ppc970.osdl.org:/home/torvalds/v2.6/linux

This got accidentally reverted in merging HPT372N support. The following
patch restores 50Mhz on the HPT374 using the 370a clocking tables.

into ppc970.osdl.org:/home/torvalds/v2.6/linux

Fix some Kconfig dependencies on PA-RISC (Grant Grundler, Martin Schulze,
					  Helge Deller, Matthew Wilcox)

Define acpi_noirq on ia64 since it's used now in pci_link.c.  All ia64
machines use ACPI, so we can just define it to 0 like we do for acpi_disabled 
and acpi_pci_disabled.
Signed-off-by: Jesse Barnes <jbarnes@sgi.com>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

PA-RISC sound updates:

 - Do a DAC/ADC reset for sampling rate changes in ad1889 (Randolph Chung)
 - Set the ad1889 interrupt configuration properly (Randolph Chung)
 - Fix dependency for the OSS Harmony driver (Thibaut Varene)
 - Forward port Stuart Brady's 2.4 Harmony driver patches (Thibaut Varene)
   - Fix sample skipping (Stuart Brady)
   - Prevent harmony_silence being called wrongly (Stuart Brady)
   - Fix crash caused by buf_to_fill becoming -1 (Stuart Brady)
   - Improve naming of mixer channels (Stuart Brady)
   - Implement SNDCTL_DSP_CHANNELS ioctl (Stuart Brady)
   - Improve toggling the recording source (Stuart Brady)
   - Sanity check MIXER_WRITE volume levels (Stuart Brady)
   - Fix MIXER_READ right_level return (Stuart Brady)
   - Reject AFMT_S16_LE format (Stuart Brady)
 - Fail OSS Harmony initialisation if no irq (Helge Deller)
 - Fix typos in ALSA Harmony (Andy Walker, Grant Grundler, Stuart Brady)

Patch from Ben Dooks

Attached is a couple of initial help documents for the
s3c2410, under Documents/arm/Samsung-S3C24XX

Patch from Ben Dooks

Attached is a copyright / explanation header for the
arch/arm/mach-s3c2410/s3c2410.h header files

Patch from Ben Dooks

A set of default devices for the s3c2410 SoC for
use with the machine(s)

Spotted by Francois Romieu.

It's not needed, and it generates very poor code on some platforms.

Noticed by Bart and David Miller.

Changes:
   - send vendor, product and rev strings back for 36 byte
     INQUIRYs
   - set the additional length field to indicate 96 byte
     response is available 

This bug could potentially lead to soft hangs (processes stuck in D
state) if an error occurred.

Yet another undocumented nuance of the ->eh_strategy_handler.

Thanks to excellent detective work by Brad Campbell tracking this down.

Patch from Dave Jiang

Removed unnecessary parens in patch 2017 per RMK

Patch from Michael Opdenacker

Hello,

platform_device definitions are no longer needed in include/asm-arm/hardware.h:
- platform_add_device no longer exists anywhere else in the whole kernel
- other definitions should be taken from include/linux/device.h instead

The proposed patch removes these definitions.

Cheers,

Michael.

Remove unnecessary checks for addresses > TI_ADDR_LIMIT in
get_user/put_user.  The MMU will catch out of bounds accesses
for us.

Make PREEMPT_ACTIVE use bit 30 not bit 26; this gives extra bits for
hard IRQs.

Delete TIF_USED_FPU - it's unused.

These macros don't take account of which bus is actually required,
so they should not be used in new drivers; in fact, new drivers
should use the DMA API.

Patch from Dave Jiang

Code cleanup. Removed all IOP80310 support. Also some minor compile warning fixups for 80321. Preping for IOP321 and IOP331 code submissions.

CPU masks are now contained within cpumask_t and must be manipulated
with associated functions.

This adds the CLCD support code for the LCD panel fitted to the
Integrator/PP2 platform.  Other LCD panel data (including VGA data)
is included.

This adds the CLCD support code to support VGA output on ARMs
Integrator/CP platform.

This adds the CLCD support code to support the variety of LCD panels
and VGA output supported on ARMs Versatile platform.

This changeset adds the ARM AMBA CLCD framebuffer driver.  This is
a generic core driver; users are expected to add their platform
specifics via the "platform_data" struct device entry.

into pobox.com:/spare/repo/netdev-2.6/ALL

drivers/scsi/libata-core.c: In function `swap_buf_le16':
drivers/scsi/libata-core.c:2073: `words' undeclared (first use in this function)
drivers/scsi/libata-core.c:2073: (Each undeclared identifier is reported only once
Signed-off-by: Andrew Morton <akpm@osdl.org>

Patch from Ben Dooks

Support for DMA controller on the Samsung S3C2410,
and fixes to the header files for DMA register definitions


Fixes the menuconfig problem from the original patch