- 05 Jul, 2019 5 commits
-
-
David S. Miller authored
Cong Wang says: ==================== hsr: a few bug fixes This patchset contains 3 bug fixes for hsr triggered by a syzbot reproducer, please check each patch for details. ==================== Signed-off-by:Cong Wang <xiyou.wangcong@gmail.com>
-
Cong Wang authored
hsr_port_get_hsr() could return NULL and kernel could crash: BUG: kernel NULL pointer dereference, address: 0000000000000010 #PF: supervisor read access in kernel mode #PF: error_code(0x0000) - not-present page PGD 8000000074b84067 P4D 8000000074b84067 PUD 7057d067 PMD 0 Oops: 0000 [#1] SMP PTI CPU: 0 PID: 754 Comm: a.out Not tainted 5.2.0-rc6+ #718 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.12.0-2.fc30 04/01/2014 RIP: 0010:hsr_dev_xmit+0x20/0x31 Code: 48 8b 1b eb e0 5b 5d 41 5c c3 66 66 66 66 90 55 48 89 fd 48 8d be 40 0b 00 00 be 04 00 00 00 e8 ee f2 ff ff 48 89 ef 48 89 c6 <48> 8b 40 10 48 89 45 10 e8 6c 1b 00 00 31 c0 5d c3 66 66 66 66 90 RSP: 0018:ffffb5b400003c48 EFLAGS: 00010246 RAX: 0000000000000000 RBX: ffff9821b4509a88 RCX: 0000000000000000 RDX: ffff9821b4509a88 RSI: 0000000000000000 RDI: ffff9821bc3fc7c0 RBP: ffff9821bc3fc7c0 R08: 0000000000000000 R09: 00000000000c2019 R10: 0000000000000000 R11: 0000000000000002 R12: ffff9821bc3fc7c0 R13: ffff9821b4509a88 R14: 0000000000000000 R15: 000000000000006e FS: 00007fee112a1800(0000) GS:ffff9821bd800000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000010 CR3: 000000006e9ce000 CR4: 00000000000406f0 Call Trace: <IRQ> netdev_start_xmit+0x1b/0x38 dev_hard_start_xmit+0x121/0x21e ? validate_xmit_skb.isra.0+0x19/0x1e3 __dev_queue_xmit+0x74c/0x823 ? lockdep_hardirqs_on+0x12b/0x17d ip6_finish_output2+0x3d3/0x42c ? ip6_mtu+0x55/0x5c ? mld_sendpack+0x191/0x229 mld_sendpack+0x191/0x229 mld_ifc_timer_expire+0x1f7/0x230 ? mld_dad_timer_expire+0x58/0x58 call_timer_fn+0x12e/0x273 __run_timers.part.0+0x174/0x1b5 ? mld_dad_timer_expire+0x58/0x58 ? sched_clock_cpu+0x10/0xad ? mark_lock+0x26/0x1f2 ? __lock_is_held+0x40/0x71 run_timer_softirq+0x26/0x48 __do_softirq+0x1af/0x392 irq_exit+0x53/0xa2 smp_apic_timer_interrupt+0x1c4/0x1d9 apic_timer_interrupt+0xf/0x20 </IRQ> Cc: Arvid Brodin <arvid.brodin@alten.se> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Cong Wang authored
hsr_link_ops implements ->newlink() but not ->dellink(), which leads that resources not released after removing the device, particularly the entries in self_node_db and node_db. So add ->dellink() implementation to replace the priv_destructor. This also makes the code slightly easier to understand. Reported-by: syzbot+c6167ec3de7def23d1e8@syzkaller.appspotmail.com Cc: Arvid Brodin <arvid.brodin@alten.se> Signed-off-by:
-
Cong Wang authored
hsr_del_port() should release all the resources allocated in hsr_add_port(). As a consequence of this change, hsr_for_each_port() is no longer safe to work with hsr_del_port(), switch to list_for_each_entry_safe() as we always hold RTNL lock. Cc: Arvid Brodin <arvid.brodin@alten.se> Signed-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/klassert/ipsecDavid S. Miller authored
Steffen Klassert says: ==================== pull request (net): ipsec 2019-07-05 1) Fix xfrm selector prefix length validation for inter address family tunneling. From Anirudh Gupta. 2) Fix a memleak in pfkey. From Jeremy Sowden. 3) Fix SA selector validation to allow empty selectors again. From Nicolas Dichtel. 4) Select crypto ciphers for xfrm_algo, this fixes some randconfig builds. From Arnd Bergmann. 5) Remove a duplicated assignment in xfrm_bydst_resize. From Cong Wang. 6) Fix a hlist corruption on hash rebuild. From Florian Westphal. 7) Fix a memory leak when creating xfrm interfaces. From Nicolas Dichtel. Please pull or let me know if there are problems. ==================== Signed-off-by:
-
- 03 Jul, 2019 15 commits
-
-
Cong Wang authored
bond_xmit_roundrobin() checks for IGMP packets but it parses the IP header even before checking skb->protocol. We should validate the IP header with pskb_may_pull() before using iph->protocol. Reported-and-tested-by: syzbot+e5be16aa39ad6e755391@syzkaller.appspotmail.com Fixes: a2fd940f ("bonding: fix broken multicast with round-robin mode") Cc: Jay Vosburgh <j.vosburgh@gmail.com> Cc: Veaceslav Falico <vfalico@gmail.com> Cc: Andy Gospodarek <andy@greyhouse.net> Signed-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpfDavid S. Miller authored
Daniel Borkmann says: ==================== pull-request: bpf 2019-07-03 The following pull-request contains BPF updates for your *net* tree. The main changes are: 1) Fix the interpreter to properly handle BPF_ALU32 | BPF_ARSH on BE architectures, from Jiong. 2) Fix several bugs in the x32 BPF JIT for handling shifts by 0, from Luke and Xi. 3) Fix NULL pointer deref in btf_type_is_resolve_source_only(), from Stanislav. 4) Properly handle the check that forwarding is enabled on the device in bpf_ipv6_fib_lookup() helper code, from Anton. 5) Fix UAPI bpf_prog_info fields alignment for archs that have 16 bit alignment such as m68k, from Baruch. 6) Fix kernel hanging in unregister_netdevice loop while unregistering device bound to XDP socket, from Ilya. 7) Properly terminate tail update in xskq_produce_flush_desc(), from Nathan. 8) Fix broken always_inline handling in test_lwt_seg6local, from Jiri. 9) Fix bpftool to use correct argument in cgroup errors, from Jakub. 10) Fix detaching dummy prog in XDP redirect sample code, from Prashant. 11) Add Jonathan to AF_XDP reviewers, from Björn. ==================== Signed-off-by: -
Yonglong Liu authored
The hip07 chip support vlan TSO, this patch adds NETIF_F_TSO and NETIF_F_TSO6 flags to vlan_features to improve the performance after adding vlan to the net ports. Signed-off-by:
Yonglong Liu <liuyonglong@huawei.com> Signed-off-by:
-
Xin Long authored
Now all ctrl chunks are counted for asoc stats.octrlchunks and net SCTP_MIB_OUTCTRLCHUNKS either after queuing up or bundling, other than the chunk maked and bundled in sctp_packet_bundle_sack, which caused 'outctrlchunks' not consistent with 'inctrlchunks' in peer. This issue exists since very beginning, here to fix it by increasing both net SCTP_MIB_OUTCTRLCHUNKS and asoc stats.octrlchunks when sack chunk is maked and bundled in sctp_packet_bundle_sack. Reported-by:
Ja Ram Jeon <jajeon@redhat.com> Signed-off-by:
Xin Long <lucien.xin@gmail.com> Acked-by:
Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Acked-by:
Neil Horman <nhorman@tuxdriver.com> Signed-off-by:
-
Hayes Wang authored
r8153b_rx_agg_chg_indicate() needs to be called after enabling TX/RX and before calling rxdy_gated_en(tp, false). Otherwise, the change of the settings of RX aggregation wouldn't work. Besides, adjust rtl8152_set_coalesce() for the same reason. If rx_coalesce_usecs is changed, restart TX/RX to let the setting work. Signed-off-by:
Hayes Wang <hayeswang@realtek.com> Signed-off-by:
-
Stephen Hemminger authored
If IPV6 was disabled, then ss command would cause a kernel warning because the command was attempting to dump IPV6 socket information. The fix is to just remove the warning. Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=202249 Fixes: 432490f9 ("net: ip, diag -- Add diag interface for raw sockets") Signed-off-by:
Stephen Hemminger <stephen@networkplumber.org> Signed-off-by:
-
Ilya Maximets authored
Device that bound to XDP socket will not have zero refcount until the userspace application will not close it. This leads to hang inside 'netdev_wait_allrefs()' if device unregistering requested: # ip link del p1 < hang on recvmsg on netlink socket > # ps -x | grep ip 5126 pts/0 D+ 0:00 ip link del p1 # journalctl -b Jun 05 07:19:16 kernel: unregister_netdevice: waiting for p1 to become free. Usage count = 1 Jun 05 07:19:27 kernel: unregister_netdevice: waiting for p1 to become free. Usage count = 1 ... Fix that by implementing NETDEV_UNREGISTER event notification handler to properly clean up all the resources and unref device. This should also allow socket killing via ss(8) utility. Fixes: 965a9909 ("xsk: add support for bind for Rx") Signed-off-by:
Ilya Maximets <i.maximets@samsung.com> Acked-by:
Jonathan Lemon <jonathan.lemon@gmail.com> Signed-off-by:
Daniel Borkmann <daniel@iogearbox.net>
-
Ilya Maximets authored
Device pointer stored in umem regardless of zero-copy mode, so we heed to hold the device in all cases. Fixes: c9b47cc1 ("xsk: fix bug when trying to use both copy and zero-copy on one queue id") Signed-off-by:
-
Jiri Benc authored
Selftests are reporting this failure in test_lwt_seg6local.sh: + ip netns exec ns2 ip -6 route add fb00::6 encap bpf in obj test_lwt_seg6local.o sec encap_srh dev veth2 Error fetching program/map! Failed to parse eBPF program: Operation not permitted The problem is __attribute__((always_inline)) alone is not enough to prevent clang from inserting those functions in .text. In that case, .text is not marked as relocateable. See the output of objdump -h test_lwt_seg6local.o: Idx Name Size VMA LMA File off Algn 0 .text 00003530 0000000000000000 0000000000000000 00000040 2**3 CONTENTS, ALLOC, LOAD, READONLY, CODE This causes the iproute bpf loader to fail in bpf_fetch_prog_sec: bpf_has_call_data returns true but bpf_fetch_prog_relo fails as there's no relocateable .text section in the file. To fix this, convert to 'static __always_inline'. v2: Use 'static __always_inline' instead of 'static inline __attribute__((always_inline))' Fixes: c99a84ea ("selftests/bpf: test for seg6local End.BPF action") Signed-off-by:Jiri Benc <jbenc@redhat.com> Acked-by:
Yonghong Song <yhs@fb.com> Signed-off-by:
-
Luke Nelson authored
There are currently no tests for ALU64 shift operations when the shift amount is 0. This adds 6 new tests to make sure they are equivalent to a no-op. The x32 JIT had such bugs that could have been caught by these tests. Cc: Xi Wang <xi.wang@gmail.com> Signed-off-by:
Luke Nelson <luke.r.nels@gmail.com> Signed-off-by:
-
Luke Nelson authored
The current x32 BPF JIT does not correctly compile shift operations when the immediate shift amount is 0. The expected behavior is for this to be a no-op. The following program demonstrates the bug. The expexceted result is 1, but the current JITed code returns 2. r0 = 1 r1 = 1 r1 <<= 0 if r1 == 1 goto end r0 = 2 end: exit This patch simplifies the code and fixes the bug. Fixes: 03f5781b ("bpf, x86_32: add eBPF JIT compiler for ia32") Co-developed-by:
Xi Wang <xi.wang@gmail.com> Signed-off-by:
-
Luke Nelson authored
The current x32 BPF JIT for shift operations is not correct when the shift amount in a register is 0. The expected behavior is a no-op, whereas the current implementation changes bits in the destination register. The following example demonstrates the bug. The expected result of this program is 1, but the current JITed code returns 2. r0 = 1 r1 = 1 r2 = 0 r1 <<= r2 if r1 == 1 goto end r0 = 2 end: exit The bug is caused by an incorrect assumption by the JIT that a shift by 32 clear the register. On x32 however, shifts use the lower 5 bits of the source, making a shift by 32 equivalent to a shift by 0. This patch fixes the bug using double-precision shifts, which also simplifies the code. Fixes: 03f5781b ("bpf, x86_32: add eBPF JIT compiler for ia32") Co-developed-by:
-
Nicolas Dichtel authored
The following commands produce a backtrace and return an error but the xfrm interface is created (in the wrong netns): $ ip netns add foo $ ip netns add bar $ ip -n foo netns set bar 0 $ ip -n foo link add xfrmi0 link-netnsid 0 type xfrm dev lo if_id 23 RTNETLINK answers: Invalid argument $ ip -n bar link ls xfrmi0 2: xfrmi0@lo: <NOARP,M-DOWN> mtu 1500 qdisc noop state DOWN mode DEFAULT group default qlen 1000 link/none 00:00:00:00:00:00 brd 00:00:00:00:00:00 Here is the backtrace: [ 79.879174] WARNING: CPU: 0 PID: 1178 at net/core/dev.c:8172 rollback_registered_many+0x86/0x3c1 [ 79.880260] Modules linked in: xfrm_interface nfsv3 nfs_acl auth_rpcgss nfsv4 nfs lockd grace sunrpc fscache button parport_pc parport serio_raw evdev pcspkr loop ext4 crc16 mbcache jbd2 crc32c_generic ide_cd_mod ide_gd_mod cdrom ata_$ eneric ata_piix libata scsi_mod 8139too piix psmouse i2c_piix4 ide_core 8139cp mii i2c_core floppy [ 79.883698] CPU: 0 PID: 1178 Comm: ip Not tainted 5.2.0-rc6+ #106 [ 79.884462] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.10.2-1 04/01/2014 [ 79.885447] RIP: 0010:rollback_registered_many+0x86/0x3c1 [ 79.886120] Code: 01 e8 d7 7d c6 ff 0f 0b 48 8b 45 00 4c 8b 20 48 8d 58 90 49 83 ec 70 48 8d 7b 70 48 39 ef 74 44 8a 83 d0 04 00 00 84 c0 75 1f <0f> 0b e8 61 cd ff ff 48 b8 00 01 00 00 00 00 ad de 48 89 43 70 66 [ 79.888667] RSP: 0018:ffffc900015ab740 EFLAGS: 00010246 [ 79.889339] RAX: ffff8882353e5700 RBX: ffff8882353e56a0 RCX: ffff8882353e5710 [ 79.890174] RDX: ffffc900015ab7e0 RSI: ffffc900015ab7e0 RDI: ffff8882353e5710 [ 79.891029] RBP: ffffc900015ab7e0 R08: ffffc900015ab7e0 R09: ffffc900015ab7e0 [ 79.891866] R10: ffffc900015ab7a0 R11: ffffffff82233fec R12: ffffc900015ab770 [ 79.892728] R13: ffffffff81eb7ec0 R14: ffff88822ed6cf00 R15: 00000000ffffffea [ 79.893557] FS: 00007ff350f31740(0000) GS:ffff888237a00000(0000) knlGS:0000000000000000 [ 79.894581] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 79.895317] CR2: 00000000006c8580 CR3: 000000022c272000 CR4: 00000000000006f0 [ 79.896137] Call Trace: [ 79.896464] unregister_netdevice_many+0x12/0x6c [ 79.896998] __rtnl_newlink+0x6e2/0x73b [ 79.897446] ? __kmalloc_node_track_caller+0x15e/0x185 [ 79.898039] ? pskb_expand_head+0x5f/0x1fe [ 79.898556] ? stack_access_ok+0xd/0x2c [ 79.899009] ? deref_stack_reg+0x12/0x20 [ 79.899462] ? stack_access_ok+0xd/0x2c [ 79.899927] ? stack_access_ok+0xd/0x2c [ 79.900404] ? __module_text_address+0x9/0x4f [ 79.900910] ? is_bpf_text_address+0x5/0xc [ 79.901390] ? kernel_text_address+0x67/0x7b [ 79.901884] ? __kernel_text_address+0x1a/0x25 [ 79.902397] ? unwind_get_return_address+0x12/0x23 [ 79.903122] ? __cmpxchg_double_slab.isra.37+0x46/0x77 [ 79.903772] rtnl_newlink+0x43/0x56 [ 79.904217] rtnetlink_rcv_msg+0x200/0x24c In fact, each time a xfrm interface was created, a netdev was allocated by __rtnl_newlink()/rtnl_create_link() and then another one by xfrmi_newlink()/xfrmi_create(). Only the second one was registered, it's why the previous commands produce a backtrace: dev_change_net_namespace() was called on a netdev with reg_state set to NETREG_UNINITIALIZED (the first one). CC: Lorenzo Colitti <lorenzo@google.com> CC: Benedict Wong <benedictwong@google.com> CC: Steffen Klassert <steffen.klassert@secunet.com> CC: Shannon Nelson <shannon.nelson@oracle.com> CC: Antony Antony <antony@phenome.org> CC: Eyal Birger <eyal.birger@gmail.com> Fixes: f203b76d ("xfrm: Add virtual xfrm interfaces") Reported-by:Julien Floret <julien.floret@6wind.com> Signed-off-by:
Nicolas Dichtel <nicolas.dichtel@6wind.com> Signed-off-by:
Steffen Klassert <steffen.klassert@secunet.com>
-
Florian Westphal authored
syzbot reported following spat: BUG: KASAN: use-after-free in __write_once_size include/linux/compiler.h:221 BUG: KASAN: use-after-free in hlist_del_rcu include/linux/rculist.h:455 BUG: KASAN: use-after-free in xfrm_hash_rebuild+0xa0d/0x1000 net/xfrm/xfrm_policy.c:1318 Write of size 8 at addr ffff888095e79c00 by task kworker/1:3/8066 Workqueue: events xfrm_hash_rebuild Call Trace: __write_once_size include/linux/compiler.h:221 [inline] hlist_del_rcu include/linux/rculist.h:455 [inline] xfrm_hash_rebuild+0xa0d/0x1000 net/xfrm/xfrm_policy.c:1318 process_one_work+0x814/0x1130 kernel/workqueue.c:2269 Allocated by task 8064: __kmalloc+0x23c/0x310 mm/slab.c:3669 kzalloc include/linux/slab.h:742 [inline] xfrm_hash_alloc+0x38/0xe0 net/xfrm/xfrm_hash.c:21 xfrm_policy_init net/xfrm/xfrm_policy.c:4036 [inline] xfrm_net_init+0x269/0xd60 net/xfrm/xfrm_policy.c:4120 ops_init+0x336/0x420 net/core/net_namespace.c:130 setup_net+0x212/0x690 net/core/net_namespace.c:316 The faulting address is the address of the old chain head, free'd by xfrm_hash_resize(). In xfrm_hash_rehash(), chain heads get re-initialized without any hlist_del_rcu: for (i = hmask; i >= 0; i--) INIT_HLIST_HEAD(odst + i); Then, hlist_del_rcu() gets called on the about to-be-reinserted policy when iterating the per-net list of policies. hlist_del_rcu() will then make chain->first be nonzero again: static inline void __hlist_del(struct hlist_node *n) { struct hlist_node *next = n->next; // address of next element in list struct hlist_node **pprev = n->pprev;// location of previous elem, this // can point at chain->first WRITE_ONCE(*pprev, next); // chain->first points to next elem if (next) next->pprev = pprev; Then, when we walk chainlist to find insertion point, we may find a non-empty list even though we're supposedly reinserting the first policy to an empty chain. To fix this first unlink all exact and inexact policies instead of zeroing the list heads. Add the commands equivalent to the syzbot reproducer to xfrm_policy.sh, without fix KASAN catches the corruption as it happens, SLUB poisoning detects it a bit later. Reported-by: syzbot+0165480d4ef07360eeda@syzkaller.appspotmail.com Fixes: 1548bc4e ("xfrm: policy: delete inexact policies from inexact list on hash rebuild") Signed-off-by:Florian Westphal <fw@strlen.de> Signed-off-by:
-
Po-Hsu Lin authored
The psock_tpacket test will need to access /proc/kallsyms, this would require the kernel config CONFIG_KALLSYMS to be enabled first. Apart from adding CONFIG_KALLSYMS to the net/config file here, check the file existence to determine if we can run this test will be helpful to avoid a false-positive test result when testing it directly with the following commad against a kernel that have CONFIG_KALLSYMS disabled: make -C tools/testing/selftests TARGETS=net run_tests Signed-off-by:Po-Hsu Lin <po-hsu.lin@canonical.com> Acked-by:
Shuah Khan <skhan@linuxfoundation.org> Signed-off-by:
-
- 02 Jul, 2019 20 commits
-
-
David Howells authored
If the rxrpc_eproto tracepoint is enabled, an oops will be cause by the trace line that rxrpc_extract_header() tries to emit when a protocol error occurs (typically because the packet is short) because the call argument is NULL. Fix this by using ?: to assume 0 as the debug_id if call is NULL. This can then be induced by: echo -e '\0\0\0\0\0\0\0\0' | ncat -4u --send-only <addr> 20001 where addr has the following program running on it: #include <stdio.h> #include <stdlib.h> #include <string.h> #include <unistd.h> #include <sys/socket.h> #include <arpa/inet.h> #include <linux/rxrpc.h> int main(void) { struct sockaddr_rxrpc srx; int fd; memset(&srx, 0, sizeof(srx)); srx.srx_family = AF_RXRPC; srx.srx_service = 0; srx.transport_type = AF_INET; srx.transport_len = sizeof(srx.transport.sin); srx.transport.sin.sin_family = AF_INET; srx.transport.sin.sin_port = htons(0x4e21); fd = socket(AF_RXRPC, SOCK_DGRAM, AF_INET6); bind(fd, (struct sockaddr *)&srx, sizeof(srx)); sleep(20); return 0; } It results in the following oops. BUG: kernel NULL pointer dereference, address: 0000000000000340 #PF: supervisor read access in kernel mode #PF: error_code(0x0000) - not-present page ... RIP: 0010:trace_event_raw_event_rxrpc_rx_eproto+0x47/0xac ... Call Trace: <IRQ> rxrpc_extract_header+0x86/0x171 ? rcu_read_lock_sched_held+0x5d/0x63 ? rxrpc_new_skb+0xd4/0x109 rxrpc_input_packet+0xef/0x14fc ? rxrpc_input_data+0x986/0x986 udp_queue_rcv_one_skb+0xbf/0x3d0 udp_unicast_rcv_skb.isra.8+0x64/0x71 ip_protocol_deliver_rcu+0xe4/0x1b4 ip_local_deliver+0xf0/0x154 __netif_receive_skb_one_core+0x50/0x6c netif_receive_skb_internal+0x26b/0x2e9 napi_gro_receive+0xf8/0x1da rtl8169_poll+0x303/0x4c4 net_rx_action+0x10e/0x333 __do_softirq+0x1a5/0x38f irq_exit+0x54/0xc4 do_IRQ+0xda/0xf8 common_interrupt+0xf/0xf </IRQ> ... ? cpuidle_enter_state+0x23c/0x34d cpuidle_enter+0x2a/0x36 do_idle+0x163/0x1ea cpu_startup_entry+0x1d/0x1f start_secondary+0x157/0x172 secondary_startup_64+0xa4/0xb0 Fixes: a25e21f0 ("rxrpc, afs: Use debug_ids rather than pointers in traces") Signed-off-by:David Howells <dhowells@redhat.com> Reviewed-by:
Marc Dionne <marc.dionne@auristor.com> Signed-off-by:
-
Phong Tran authored
This is for fixing bug KMSAN: uninit-value in ax88772_bind Tested by https://groups.google.com/d/msg/syzkaller-bugs/aFQurGotng4/eB_HlNhhCwAJ Reported-by: syzbot+8a3fc6674bbc3978ed4e@syzkaller.appspotmail.com syzbot found the following crash on: HEAD commit: f75e4cfe kmsan: use kmsan_handle_urb() in urb.c git tree: kmsan console output: https://syzkaller.appspot.com/x/log.txt?x=136d720ea00000 kernel config: https://syzkaller.appspot.com/x/.config?x=602468164ccdc30a dashboard link: https://syzkaller.appspot.com/bug?extid=8a3fc6674bbc3978ed4e compiler: clang version 9.0.0 (/home/glider/llvm/clang 06d00afa61eef8f7f501ebdb4e8612ea43ec2d78) syz repro: https://syzkaller.appspot.com/x/repro.syz?x=12788316a00000 C reproducer: https://syzkaller.appspot.com/x/repro.c?x=120359aaa00000 ================================================================== BUG: KMSAN: uninit-value in is_valid_ether_addr include/linux/etherdevice.h:200 [inline] BUG: KMSAN: uninit-value in asix_set_netdev_dev_addr drivers/net/usb/asix_devices.c:73 [inline] BUG: KMSAN: uninit-value in ax88772_bind+0x93d/0x11e0 drivers/net/usb/asix_devices.c:724 CPU: 0 PID: 3348 Comm: kworker/0:2 Not tainted 5.1.0+ #1 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Workqueue: usb_hub_wq hub_event Call Trace: __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0x191/0x1f0 lib/dump_stack.c:113 kmsan_report+0x130/0x2a0 mm/kmsan/kmsan.c:622 __msan_warning+0x75/0xe0 mm/kmsan/kmsan_instr.c:310 is_valid_ether_addr include/linux/etherdevice.h:200 [inline] asix_set_netdev_dev_addr drivers/net/usb/asix_devices.c:73 [inline] ax88772_bind+0x93d/0x11e0 drivers/net/usb/asix_devices.c:724 usbnet_probe+0x10f5/0x3940 drivers/net/usb/usbnet.c:1728 usb_probe_interface+0xd66/0x1320 drivers/usb/core/driver.c:361 really_probe+0xdae/0x1d80 drivers/base/dd.c:513 driver_probe_device+0x1b3/0x4f0 drivers/base/dd.c:671 __device_attach_driver+0x5b8/0x790 drivers/base/dd.c:778 bus_for_each_drv+0x28e/0x3b0 drivers/base/bus.c:454 __device_attach+0x454/0x730 drivers/base/dd.c:844 device_initial_probe+0x4a/0x60 drivers/base/dd.c:891 bus_probe_device+0x137/0x390 drivers/base/bus.c:514 device_add+0x288d/0x30e0 drivers/base/core.c:2106 usb_set_configuration+0x30dc/0x3750 drivers/usb/core/message.c:2027 generic_probe+0xe7/0x280 drivers/usb/core/generic.c:210 usb_probe_device+0x14c/0x200 drivers/usb/core/driver.c:266 really_probe+0xdae/0x1d80 drivers/base/dd.c:513 driver_probe_device+0x1b3/0x4f0 drivers/base/dd.c:671 __device_attach_driver+0x5b8/0x790 drivers/base/dd.c:778 bus_for_each_drv+0x28e/0x3b0 drivers/base/bus.c:454 __device_attach+0x454/0x730 drivers/base/dd.c:844 device_initial_probe+0x4a/0x60 drivers/base/dd.c:891 bus_probe_device+0x137/0x390 drivers/base/bus.c:514 device_add+0x288d/0x30e0 drivers/base/core.c:2106 usb_new_device+0x23e5/0x2ff0 drivers/usb/core/hub.c:2534 hub_port_connect drivers/usb/core/hub.c:5089 [inline] hub_port_connect_change drivers/usb/core/hub.c:5204 [inline] port_event drivers/usb/core/hub.c:5350 [inline] hub_event+0x48d1/0x7290 drivers/usb/core/hub.c:5432 process_one_work+0x1572/0x1f00 kernel/workqueue.c:2269 process_scheduled_works kernel/workqueue.c:2331 [inline] worker_thread+0x189c/0x2460 kernel/workqueue.c:2417 kthread+0x4b5/0x4f0 kernel/kthread.c:254 ret_from_fork+0x35/0x40 arch/x86/entry/entry_64.S:355 Signed-off-by:
Phong Tran <tranmanphong@gmail.com> Signed-off-by:
-
David S. Miller authored
Andreas Steinmetz says: ==================== macsec: fix some bugs in the receive path This series fixes some bugs in the receive path of macsec. The first is a use after free when processing macsec frames with a SecTAG that has the TCI E bit set but the C bit clear. In the 2nd bug, the driver leaves an invalid checksumming state after decrypting the packet. This is a combined effort of Sabrina Dubroca <sd@queasysnail.net> and me. ==================== Signed-off-by: -
Andreas Steinmetz authored
Fix checksumming after decryption. Signed-off-by:
Andreas Steinmetz <ast@domdv.de> Signed-off-by:
-
Andreas Steinmetz authored
Fix use-after-free of skb when rx_handler returns RX_HANDLER_PASS. Signed-off-by:
Willem de Bruijn <willemb@google.com> Signed-off-by:
-
David Howells authored
If sendmsg() or sendmmsg() is called on a connected socket that hasn't had bind() called on it, then an oops will occur when the kernel tries to connect the call because no local endpoint has been allocated. Fix this by implicitly binding the socket if it is in the RXRPC_CLIENT_UNBOUND state, just like it does for the RXRPC_UNBOUND state. Further, the state should be transitioned to RXRPC_CLIENT_BOUND after this to prevent further attempts to bind it. This can be tested with: #include <stdio.h> #include <stdlib.h> #include <string.h> #include <sys/socket.h> #include <arpa/inet.h> #include <linux/rxrpc.h> static const unsigned char inet6_addr[16] = { 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, -1, -1, 0xac, 0x14, 0x14, 0xaa }; int main(void) { struct sockaddr_rxrpc srx; struct cmsghdr *cm; struct msghdr msg; unsigned char control[16]; int fd; memset(&srx, 0, sizeof(srx)); srx.srx_family = 0x21; srx.srx_service = 0; srx.transport_type = AF_INET; srx.transport_len = 0x1c; srx.transport.sin6.sin6_family = AF_INET6; srx.transport.sin6.sin6_port = htons(0x4e22); srx.transport.sin6.sin6_flowinfo = htons(0x4e22); srx.transport.sin6.sin6_scope_id = htons(0xaa3b); memcpy(&srx.transport.sin6.sin6_addr, inet6_addr, 16); cm = (struct cmsghdr *)control; cm->cmsg_len = CMSG_LEN(sizeof(unsigned long)); cm->cmsg_level = SOL_RXRPC; cm->cmsg_type = RXRPC_USER_CALL_ID; *(unsigned long *)CMSG_DATA(cm) = 0; msg.msg_name = NULL; msg.msg_namelen = 0; msg.msg_iov = NULL; msg.msg_iovlen = 0; msg.msg_control = control; msg.msg_controllen = cm->cmsg_len; msg.msg_flags = 0; fd = socket(AF_RXRPC, SOCK_DGRAM, AF_INET); connect(fd, (struct sockaddr *)&srx, sizeof(srx)); sendmsg(fd, &msg, 0); return 0; } Leading to the following oops: BUG: kernel NULL pointer dereference, address: 0000000000000018 #PF: supervisor read access in kernel mode #PF: error_code(0x0000) - not-present page ... RIP: 0010:rxrpc_connect_call+0x42/0xa01 ... Call Trace: ? mark_held_locks+0x47/0x59 ? __local_bh_enable_ip+0xb6/0xba rxrpc_new_client_call+0x3b1/0x762 ? rxrpc_do_sendmsg+0x3c0/0x92e rxrpc_do_sendmsg+0x3c0/0x92e rxrpc_sendmsg+0x16b/0x1b5 sock_sendmsg+0x2d/0x39 ___sys_sendmsg+0x1a4/0x22a ? release_sock+0x19/0x9e ? reacquire_held_locks+0x136/0x160 ? release_sock+0x19/0x9e ? find_held_lock+0x2b/0x6e ? __lock_acquire+0x268/0xf73 ? rxrpc_connect+0xdd/0xe4 ? __local_bh_enable_ip+0xb6/0xba __sys_sendmsg+0x5e/0x94 do_syscall_64+0x7d/0x1bf entry_SYSCALL_64_after_hwframe+0x49/0xbe Fixes: 2341e077 ("rxrpc: Simplify connect() implementation and simplify sendmsg() op") Reported-by: syzbot+7966f2a0b2c7da8939b4@syzkaller.appspotmail.com Signed-off-by: -
David S. Miller authored
Nikolay Aleksandrov says: ==================== net: bridge: fix possible stale skb pointers In the bridge driver we have a couple of places which call pskb_may_pull but we've cached skb pointers before that and use them after which can lead to out-of-bounds/stale pointer use. I've had these in my "to fix" list for some time and now we got a report (patch 01) so here they are. Patches 02-04 are fixes based on code inspection. Also patch 01 was tested by Martin Weinelt, Martin if you don't mind please add your tested-by tag to it by replying with Tested-by: name <email>. I've also briefly tested the set by trying to exercise those code paths. ==================== Signed-off-by: -
Nikolay Aleksandrov authored
Don't cache eth dest pointer before calling pskb_may_pull. Fixes: cf0f02d0 ("[BRIDGE]: use llc for receiving STP packets") Signed-off-by:
Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by:
-
Nikolay Aleksandrov authored
We would cache ether dst pointer on input in br_handle_frame_finish but after the neigh suppress code that could lead to a stale pointer since both ipv4 and ipv6 suppress code do pskb_may_pull. This means we have to always reload it after the suppress code so there's no point in having it cached just retrieve it directly. Fixes: 057658cb ("bridge: suppress arp pkts on BR_NEIGH_SUPPRESS ports") Fixes: ed842fae ("bridge: suppress nd pkts on BR_NEIGH_SUPPRESS ports") Signed-off-by:
-
Nikolay Aleksandrov authored
We get a pointer to the ipv6 hdr in br_ip6_multicast_query but we may call pskb_may_pull afterwards and end up using a stale pointer. So use the header directly, it's just 1 place where it's needed. Fixes: 08b202b6 ("bridge br_multicast: IPv6 MLD support.") Signed-off-by:
Martin Weinelt <martin@linuxlounge.net> Signed-off-by:
-
Nikolay Aleksandrov authored
We take a pointer to grec prior to calling pskb_may_pull and use it afterwards to get nsrcs so record nsrcs before the pull when handling igmp3 and we get a pointer to nsrcs and call pskb_may_pull when handling mld2 which again could lead to reading 2 bytes out-of-bounds. ================================================================== BUG: KASAN: use-after-free in br_multicast_rcv+0x480c/0x4ad0 [bridge] Read of size 2 at addr ffff8880421302b4 by task ksoftirqd/1/16 CPU: 1 PID: 16 Comm: ksoftirqd/1 Tainted: G OE 5.2.0-rc6+ #1 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.10.2-1 04/01/2014 Call Trace: dump_stack+0x71/0xab print_address_description+0x6a/0x280 ? br_multicast_rcv+0x480c/0x4ad0 [bridge] __kasan_report+0x152/0x1aa ? br_multicast_rcv+0x480c/0x4ad0 [bridge] ? br_multicast_rcv+0x480c/0x4ad0 [bridge] kasan_report+0xe/0x20 br_multicast_rcv+0x480c/0x4ad0 [bridge] ? br_multicast_disable_port+0x150/0x150 [bridge] ? ktime_get_with_offset+0xb4/0x150 ? __kasan_kmalloc.constprop.6+0xa6/0xf0 ? __netif_receive_skb+0x1b0/0x1b0 ? br_fdb_update+0x10e/0x6e0 [bridge] ? br_handle_frame_finish+0x3c6/0x11d0 [bridge] br_handle_frame_finish+0x3c6/0x11d0 [bridge] ? br_pass_frame_up+0x3a0/0x3a0 [bridge] ? virtnet_probe+0x1c80/0x1c80 [virtio_net] br_handle_frame+0x731/0xd90 [bridge] ? select_idle_sibling+0x25/0x7d0 ? br_handle_frame_finish+0x11d0/0x11d0 [bridge] __netif_receive_skb_core+0xced/0x2d70 ? virtqueue_get_buf_ctx+0x230/0x1130 [virtio_ring] ? do_xdp_generic+0x20/0x20 ? virtqueue_napi_complete+0x39/0x70 [virtio_net] ? virtnet_poll+0x94d/0xc78 [virtio_net] ? receive_buf+0x5120/0x5120 [virtio_net] ? __netif_receive_skb_one_core+0x97/0x1d0 __netif_receive_skb_one_core+0x97/0x1d0 ? __netif_receive_skb_core+0x2d70/0x2d70 ? _raw_write_trylock+0x100/0x100 ? __queue_work+0x41e/0xbe0 process_backlog+0x19c/0x650 ? _raw_read_lock_irq+0x40/0x40 net_rx_action+0x71e/0xbc0 ? __switch_to_asm+0x40/0x70 ? napi_complete_done+0x360/0x360 ? __switch_to_asm+0x34/0x70 ? __switch_to_asm+0x40/0x70 ? __schedule+0x85e/0x14d0 __do_softirq+0x1db/0x5f9 ? takeover_tasklets+0x5f0/0x5f0 run_ksoftirqd+0x26/0x40 smpboot_thread_fn+0x443/0x680 ? sort_range+0x20/0x20 ? schedule+0x94/0x210 ? __kthread_parkme+0x78/0xf0 ? sort_range+0x20/0x20 kthread+0x2ae/0x3a0 ? kthread_create_worker_on_cpu+0xc0/0xc0 ret_from_fork+0x35/0x40 The buggy address belongs to the page: page:ffffea0001084c00 refcount:0 mapcount:-128 mapping:0000000000000000 index:0x0 flags: 0xffffc000000000() raw: 00ffffc000000000 ffffea0000cfca08 ffffea0001098608 0000000000000000 raw: 0000000000000000 0000000000000003 00000000ffffff7f 0000000000000000 page dumped because: kasan: bad access detected Memory state around the buggy address: ffff888042130180: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ffff888042130200: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff > ffff888042130280: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ^ ffff888042130300: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ffff888042130380: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ================================================================== Disabling lock debugging due to kernel taint Fixes: bc8c20ac ("bridge: multicast: treat igmpv3 report with INCLUDE and no sources as a leave") Reported-by: -
Cong Wang authored
Fixes: 30846090 ("xfrm: policy: add sequence count to sync with hash resize") Cc: Florian Westphal <fw@strlen.de> Cc: Steffen Klassert <steffen.klassert@secunet.com> Signed-off-by:
-
Hayes Wang authored
1. Rename r8153b_queue_wake() to r8153_queue_wake(). 2. Correct the setting. The enable bit should be 0xd38c bit 0. Besides, the 0xd38a bit 0 and 0xd398 bit 8 have to be cleared for both enabled and disabled. Signed-off-by:
-
Jakub Kicinski authored
Commit 86029d10 ("tls: zero the crypto information from tls_context before freeing") added memzero_explicit() calls to clear the key material before freeing struct tls_context, but it missed tls_device.c has its own way of freeing this structure. Replace the missing free. Fixes: 86029d10 ("tls: zero the crypto information from tls_context before freeing") Signed-off-by:
Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by:
Dirk van der Merwe <dirk.vandermerwe@netronome.com> Signed-off-by:
-
Jakub Kicinski authored
Neither drivers nor the tls offload code currently supports TLS version 1.3. Check the TLS version when installing connection state. TLS 1.3 will just fallback to the kernel crypto for now. Fixes: 130b392c ("net: tls: Add tls 1.3 support") Signed-off-by:
-
David S. Miller authored
Cong Wang says: ==================== idr: fix overflow cases on 32-bit CPU idr_get_next_ul() is problematic by design, it can't handle the following overflow case well on 32-bit CPU: u32 id = UINT_MAX; idr_alloc_u32(&id); while (idr_get_next_ul(&id) != NULL) id++; when 'id' overflows and becomes 0 after UINT_MAX, the loop goes infinite. Fix this by eliminating external users of idr_get_next_ul() and migrating them to idr_for_each_entry_continue_ul(). And add an additional parameter for these iteration macros to detect overflow properly. Please merge this through networking tree, as all the users are in networking subsystem. ==================== Signed-off-by: -
Davide Caratti authored
Reported-by:
Li Shuang <shuali@redhat.com> Signed-off-by:
Davide Caratti <dcaratti@redhat.com> Signed-off-by:
-
Cong Wang authored
Similarly, other callers of idr_get_next_ul() suffer the same overflow bug as they don't handle it properly either. Introduce idr_for_each_entry_continue_ul() to help these callers iterate from a given ID. cls_flower needs more care here because it still has overflow when does arg->cookie++, we have to fold its nested loops into one and remove the arg->cookie++. Fixes: 01683a14 ("net: sched: refactor flower walk to iterate over idr") Fixes: 12d6066c ("net/mlx5: Add flow counters idr") Reported-by:
-
Cong Wang authored
idr_for_each_entry_ul() is buggy as it can't handle overflow case correctly. When we have an ID == UINT_MAX, it becomes an infinite loop. This happens when running on 32-bit CPU where unsigned long has the same size with unsigned int. There is no better way to fix this than casting it to a larger integer, but we can't just 64 bit integer on 32 bit CPU. Instead we could just use an additional integer to help us to detect this overflow case, that is, adding a new parameter to this macro. Fortunately tc action is its only user right now. Fixes: 65a206c0 ("net/sched: Change act_api and act_xxx modules to use IDR") Reported-by:
-
David S. Miller authored
Stefano Garzarella says: ==================== vsock/virtio: several fixes in the .probe() and .remove() During the review of "[PATCH] vsock/virtio: Initialize core virtio vsock before registering the driver", Stefan pointed out some possible issues in the .probe() and .remove() callbacks of the virtio-vsock driver. This series tries to solve these issues: - Patch 1 adds RCU critical sections to avoid use-after-free of 'the_virtio_vsock' pointer. - Patch 2 stops workers before to call vdev->config->reset(vdev) to be sure that no one is accessing the device. - Patch 3 moves the works flush at the end of the .remove() to avoid use-after-free of 'vsock' object. v2: - Patch 1: use RCU to protect 'the_virtio_vsock' pointer - Patch 2: no changes - Patch 3: flush works only at the end of .remove() - Removed patch 4 because virtqueue_detach_unused_buf() returns all the buffers allocated. v1: https://patchwork.kernel.org/cover/10964733/ ==================== Signed-off-by:
-
