- 12 Jul, 2007 40 commits
-
-
Martin K. Petersen authored
This patch adds support for the most recent Digi EdgePort USB serial devices. Signed-off-by:
Martin K. Petersen <mkp@mkp.net> Signed-off-by:
Mike Swift <mikes@digi.com> Signed-off-by:
Jeremy McBane <jmcbane@digi.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@suse.de>
-
Alan Stern authored
This patch (as898) changes the port reset code in the hub driver. If a connect change occurs, it is reported the same way as a disconnect (which of course is what it really is). It also changes usb_reset_device(), to prevent the routine from futilely retrying the reset after a disconnect has occurred. Signed-off-by:
Alan Stern <stern@rowland.harvard.edu> Signed-off-by:
-
Alan Stern authored
This patch (as895) fixes up a loose end in the port-handover code for the USB-Persist facility. A special case occurs when a high-speed device is attached to a port which the user has designated to run at full-speed only; the port must be disabled before the handover can take place. Signed-off-by:
-
Alan Stern authored
This patch (as888) adds a new USB device quirk for devices which are unable to resume correctly. By using the new code added for the USB-persist facility, it is a simple matter to reset these devices instead of resuming them. To get things kicked off, a quirk entry is added for the Philips PSC805. Signed-off-by:
-
Alan Stern authored
This patch (as887) changes the way ehci-hcd and ohci-hcd handle a loss of VBUS power during suspend. In order for the USB-persist facility to work correctly, it is necessary for low- and full-speed devices attached to a high-speed port to be handed back to the companion controller during resume processing. This entails three changes: adding code to ehci-hcd to perform the handover, removing code from ohci-hcd to turn off ports during root-hub reinit, and adding code to ohci-hcd to turn on ports during PCI controller resume. (Other bus glue resume methods for platforms supporting high-speed controllers would need a similar change, if any existed.) Signed-off-by:
-
Alan Stern authored
This patch (as886) adds the controversial USB-persist facility, allowing USB devices to persist across a power loss during system suspend. The facility is controlled by a new Kconfig option (with appropriate warnings about the potential dangers); when the option is off the behavior will remain the same as it is now. But when the option is on, people will be able to use suspend-to-disk and keep their USB filesystems intact -- something particularly valuable for small machines where the root filesystem is on a USB device! Signed-off-by:
-
Pete Zaitcev authored
Add a class which allows for an easier integration with udev. This code was originally written by Paolo Abeni, and arrived to my tree as a part of big patch to add binary API on December 18. As I understand, Paolo always meant the class to be a part of the whole thing. This is his udev rule to go along with the patch: KERNEL=="usbmon[0-9]*", NAME="usbmon%n", MODE="0440",OWNER="root",GROUP="bin" Signed-off-by:
Pete Zaitcev <zaitcev@redhat.com> Signed-off-by:
-
Kees Lemmens authored
Last week I've been searching for a driver for the CA-42 cable (see usb below) that fitted my kernel 2.6.20. I only found an abandoned version for a driver on your website that indeed worked on 2.6.18 but wouldn't even compile with a more recent 2.6.20 kernel. I fiddled 2 evenings with the kernel code and have patched it up now to work with the modifications in the 2.6.20 kernel. The patch is attached hereafter and it works fine (at least for me :-) ). Bus 2 Device 13: ID 0ea0:6858 Ours Technology, Inc. I had to fiddle a little with the settings in .gnokiirc but that also occurred with the older 2.6.18 kernel. Nevertheless, on one system with this cable and my Nokia 6070 I had best results with : model = 6510 connection = dku5 while on an other system with the same kernel, cable and phone it only worked with : model = AT connection = serial serial_write_usleep = 1 From: Kees Lemmens <C.W.J.Lemmens@ewi.tudelft.nl> Cc: <pawel.kot@gmail.com> Cc: <bozo@andrews.hu> Signed-off-by: -
David Brownell authored
Remove atomic operations on the reference counter for EHCI queue heads. On various platforms (including ppc7448), atomic operations are unusable with dma-coherent memory. Signed-off-by:
Steven J. Hill <sjhill1@rockwellcollins.com> Signed-off-by:
David Brownell <dbrownell@users.sourceforge.net> Signed-off-by:
-
Jan Engelhardt authored
Make a "menuconfig" out of the Kconfig objects "menu, ..., endmenu", so that the user can disable all the options in that menu at once instead of having to disable each option separately. Signed-off-by:
Jan Engelhardt <jengelh@gmx.de> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
-
Alan Stern authored
This revised patch (as893c) improves the method used by the hub driver to release its private data structure. The current code is non-robust, relying on a memory region not getting reused by another driver after it has been freed. The patch adds a reference count to the structure, resolving the question of when to release it. Signed-off-by:
-
Alan Stern authored
This patch (as892) removes the "locktree" routine from the hub driver. It currently is used in only one place, by a single kernel thread; hence it isn't doing any good. Signed-off-by:
-
Alan Stern authored
This revised patch (as891b) removes two unnecessary references to intf->dev.power.power_state from usb-storage, and replaces a reference to root_hub->dev.power.power_state with a check of hcd->state. This is in preparation for the removal of dev.power.power_state, which is already deprecated. Signed-off-by:
-
Alan Stern authored
This patch (as889) prevents the hub driver from trying to resume a port when there is a new connection. For one thing, the resume is not needed -- the upcoming port reset will clear the suspend feature automatically. For another, on some systems the resume fails and causes problems. Signed-off-by:
-
Alan Stern authored
This patch (as885) moves the root-hub bus_suspend() and bus_resume() method calls from the hub driver's suspend and resume methods into the usb_generic driver methods, where they make just as much sense. Their old locations were not fully correct. For example, in a kernel compiled without CONFIG_USB_SUSPEND, if one were to do: echo -n 1-0:1.0 >/sys/bus/usb/drivers/hub/unbind to unbind the hub driver from a root hub, there would then be no way to suspend that root hub. Attempts to put the system to sleep would fail; the USB controller driver would refuse to suspend because the root hub was still active. The patch also makes a very slight change in the way devices with no driver are handled during suspend. Rather than doing a standard USB port-suspend directly, now the suspend routine in usb_generic is called. In practice this should never affect anyone. Signed-off-by:
-
Alan Stern authored
This patch (as884) finally implements the time-saving semantics possible with the Power Management FREEZE and PRETHAW events. Their proper handling requires only that devices be quiesced, with interrupts and DMA turned off; non-root USB devices don't actually need to be put in a suspended state. The patch checks and avoids doing the suspend call when possible. Signed-off-by:
-
Alan Stern authored
This patch (as880) strives to keep the PM core's idea of a USB interface's power state in synch with usbcore's own idea. In the end this doesn't really matter, but it's better to be consistent. Signed-off-by:
-
Yoshihiro Shimoda authored
This patch fixes the problem that accesses NULL pointer when disconnected a cable while play music with usb-speaker. Signed-off-by:
Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com> Signed-off-by:
-
Yoshihiro Shimoda authored
I would like to submit Renesas R8A66597 USB HCD driver. R8A66597 is Renesas USB 2.0 host and peripheral combined controller device originally designed for embedded products. As a limitation of this device, it does not support externel hub more than 2 tier, and cannot communicate with a USB device more than 10. Then this device is not compatible with EHCI and/or OHCI, I wrote driver support patch based on sl811 code. This driver has the following unique specifications: - Implement transfer timeout to share one pipe with plural endpoint. - Detach detection of a USB device connected to externel hub. The driver has been tested external hub, usb-hdd, usb-cdrom, usb-speaker, mice, keyboard, and usbtest driver. Signed-off-by : Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com> Signed-off-by: -
Yoshihiro Shimoda authored
This patch fixes the problem that used SA_* flags. Signed-off-by:
-
Yoshihiro Shimoda authored
I would like to submit Renesas M66592 udc driver. The M66592 is Renesas USB 2.0 peripheral controller. This controller supports USB high-speed. The driver has been tested Gadget Zero, Ethernet Gadget, File-backed Storage Gadget, and passed usbtest script. Signed-off-by : Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com> Signed-off-by: -
Lucy McCoy authored
Add support for Keyspan adapters: USA-49WG and USA-28XG Signed-off-by:
Lucy P. McCoy <lucy@keyspan.com> Signed-off-by:
-
Simon Arlott authored
This changes the format of unknown status values to be less verbose and uses an array instead of several different snprintf calls. Since only enum values are assigned to it, poll_state is changed from int to enum. Use abs() for dB values instead of two almost identical return lines. Signed-off-by:
Simon Arlott <simon@fire.lp0.eu> Acked-by:
Duncan Sands <duncan.sands@math.u-psud.fr> Signed-off-by:
-
Stefan Roese authored
This patch implements supports for EHCI controllers whose in-memory data structures are represented in big-endian format. This is needed (unfortunately) for the AMCC PPC440EPx SoC EHCI controller; the EHCI spec doesn't specify little-endian format, although that's what most other implementations use. The guts of the patch are to introduce the hc32 type and change all references from le32 to hc32. All access routines are converted from cpu_to_le32(...) to cpu_to_hc32(ehci, ...) and similar for the other "direction". (This is the same approach used with OHCI.) David fixed: Whitespace fixes; refresh against ehci cpufreq patch; move glue for that PPC driver to the patch adding it; fix free symbol capture bugs in modified "constant" macros; and make "hc32" etc be "le32" unless we really need the BE options, so "sparse" can do some real good. Signed-off-by:
Stefan Roese <sr@denx.de> Signed-off-by:
-
Stuart_Hayes@Dell.com authored
EHCI controllers that don't cache enough microframes can get MMF errors when CPU frequency changes occur between the start and completion of split interrupt transactions, due to delays in reading main memory (caused by CPU cache snoop delays). This patch adds a cpufreq notifier to the EHCI driver that will inactivate split interrupt transactions during frequency transitions. It was tested on Intel ICH7 and Serverworks/Broadcom HT1000 EHCI controllers. Signed-off-by:
Stuart Hayes <stuart_hayes@dell.com> Signed-off-by:
-
Oliver Neukum authored
this implements generic support for suspend/resume for usb serial. Signed-off-by:
Oliver Neukum <oneukum@suse.de> Signed-off-by:
-
Chandra Seetharaman authored
This patch supports LSI/Engenio devices in RDAC mode. Like dm-emc it requires userspace support. In your multipath.conf file you must have: path_checker rdac hardware_handler "1 rdac" prio_callout "/sbin/mpath_prio_tpc /dev/%n" And you also then must have a updated multipath tools release which has rdac support. Signed-off-by:
Chandra Seetharaman <sekharan@us.ibm.com> Signed-off-by:
Mike Christie <michaelc@cs.wisc.edu> Signed-off-by:
Alasdair G Kergon <agk@redhat.com> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Jonathan Brassow authored
When writing to a mirror, the log must be updated first. Failure to update the log could result in the log not properly reflecting the state of the mirror if the machine should crash. We change the return type of the rh_flush function to give us the ability to check if a log write was successful. If the log write was unsuccessful, we fail the writes to avoid the case where the log does not properly reflect the state of the mirror. A follow-up patch - which is dependent on the ability to requeue I/O's to core device-mapper - will requeue the I/O's for retry (allowing the mirror to be reconfigured.) Signed-off-by:
Jonathan Brassow <jbrassow@redhat.com> Signed-off-by:
-
Jonathan Brassow authored
Device-mapper mirroring currently takes a best effort approach to recovery - failures during mirror synchronization are completely ignored. This means that regions are marked 'in-sync' and 'clean' and removed from the hash list. Future reads and writes that query the region will incorrectly interpret the region as in-sync. This patch handles failures during the recovery process. If a failure occurs, the region is marked as 'not-in-sync' (aka RH_NOSYNC) and added to a new list 'failed_recovered_regions'. Regions on the 'failed_recovered_regions' list are not marked as 'clean' upon removal from the list. Furthermore, if the DM_RAID1_HANDLE_ERRORS flag is set, the region is marked as 'not-in-sync'. This action prevents any future read-balancing from choosing an invalid device because of the 'not-in-sync' status. If "handle_errors" is not specified when creating a mirror (leaving the DM_RAID1_HANDLE_ERRORS flag unset), failures will be ignored exactly as they would be without this patch. This is to preserve backwards compatibility with user-space tools, such as 'pvmove'. However, since future read-balancing policies will rely on the correct sync status of a region, a user must choose "handle_errors" when using read-balancing. Signed-off-by:
-
Jonathan Brassow authored
Add ratelimit extension to dm logging macros. Signed-off-by:
-
Stefan Bader authored
This patch causes device-mapper to reject any barrier requests. This is done since most of the targets won't handle this correctly anyway. So until the situation improves it is better to reject these requests at the first place. Since barrier requests won't get to the targets, the checks there can be removed. Cc: stable@kernel.org Signed-off-by:
Stefan Bader <shbader@de.ibm.com> Signed-off-by:
-
Jonathan Brassow authored
A clear_region function is permitted to block (in practice, rare) but gets called in rh_update_states() with a spinlock held. The bits being marked and cleared by the above functions are used to update the on-disk log, but are never read directly. We can perform these operations outside the spinlock since the bits are only changed within one thread viz. - mark_region in rh_inc() - clear_region in rh_update_states(). So, we grab the clean_regions list items via list_splice() within the spinlock and defer clear_region() until we iterate over the list for deletion - similar to how the recovered_regions list is already handled. We then move the flush() call down to ensure it encapsulates the changes which are done by the later calls to clear_region(). Signed-off-by:
-
Milan Broz authored
Allow invalid snapshots to be activated instead of failing. This allows userspace to reinstate any given snapshot state - for example after an unscheduled reboot - and clean up the invalid snapshot at its leisure. Cc: stable@kernel.org Signed-off-by:
Milan Broz <mbroz@redhat.com> Signed-off-by:
-
Milan Broz authored
Process persistent exception store metadata IOs in a separate thread. A snapshot may become invalid while inside generic_make_request(). A synchronous write is then needed to update the metadata while still inside that function. Since the introduction of md-dm-reduce-stack-usage-with-stacked-block-devices.patch this has to be performed by a separate thread to avoid deadlock. Signed-off-by:
-
Jun'ichi Nomura authored
bio_alloc_bioset() will return NULL if 'num_vecs' is too large. Use bio_get_nr_vecs() to get estimation of maximum number. Cc: stable@kernel.org Signed-off-by:
"Jun'ichi Nomura" <j-nomura@ce.jp.nec.com> Signed-off-by:
-
Milan Broz authored
Fix mirror status line broken in dm-log-report-fault-status.patch: - space missing between two words - placeholder ("0") required for compatibility with a subsequent patch - incorrect offset parameter Cc: stable@kernel.org Signed-off-by: -
Alasdair G Kergon authored
Remove explicit module name from messages as the macro now includes it automatically. Signed-off-by:
-
Alasdair G Kergon authored
Use setup_timer(). Replace semaphore with mutex. Signed-off-by:
-
Alasdair G Kergon authored
Use new KMEM_CACHE() macro and make the newly-exposed structure names more meaningful. Also remove some superfluous casts and inlines (let a modern compiler be the judge). Acked-by:
Christoph Lameter <clameter@sgi.com> Signed-off-by:
-
Alasdair G Kergon authored
Remove dubious prefetch from bio_list_for_each() macro. Cc: Jens Axboe <jens.axboe@oracle.com> Signed-off-by:
-
