An error occurred fetching the project authors.
- 27 Jan, 2014 5 commits
-
-
Mike Turquette authored
Signed-off-by:Mike Turquette <mturquette@linaro.org>
-
Emilio López authored
Currently, we are allocating space for two pointers, when we actually may need to store three of them (two divisors plus the original clock). Fix this, and change sizeof(type) to sizeof(*var) to keep checkpatch.pl happy. Reported-by:
Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by:
Emilio López <emilio@elopez.com.ar> Signed-off-by:
-
Stephen Boyd authored
Allow drivers to be compiled as modules by exporting more clock provider functions. Reported-by:
kbuild test robot <fengguang.wu@intel.com> Signed-off-by:
Stephen Boyd <sboyd@codeaurora.org> Signed-off-by:
-
Stephen Boyd authored
arch/arm/boot/dts/include/dt-bindings/clock/qcom,mmcc-msm8974.h:60:0: warning: "RBCPR_CLK_SRC" redefined Rename this to MMSS_RBCPR_CLK_SRC to avoid conflicts with the RBCPR clock in the gcc header. Reported-by:
Bjorn Andersson <bjorn.andersson@sonymobile.com> Signed-off-by:
-
Sebastian Hesselbarth authored
Commit 9807362b "clk: si5351: declare all device IDs for module loading" removed the common i2c_device_id and introduced new ones for each variant of the clock generator. Instead of exploiting that information in the driver, it still depends on platform_data passing the chips .variant. This removes the now redundant .variant from the platform_data and puts it in i2c_device_id's .driver_data instead. Signed-off-by:
Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com> Signed-off-by:
-
- 17 Jan, 2014 35 commits
-
-
Sachin Kamat authored
Semicolon not needed after switch statement. Signed-off-by:
Sachin Kamat <sachin.kamat@linaro.org> Signed-off-by:
-
Stephen Boyd authored
According to Documentation/kbuild/makefiles.txt these symbols should be clk-qcom-y. Otherwise the build will fail if CONFIG_COMMON_CLK_QCOM=m. Fix it. Reported-by:
-
Tero Kristo authored
OMAP3 platforms support both DT and non-DT boot at the moment, make the clock init work according to the used setup. Signed-off-by:
Tero Kristo <t-kristo@ti.com> Tested-by:
Nishanth Menon <nm@ti.com> Acked-by:
Tony Lindgren <tony@atomide.com> Signed-off-by:
-
Tero Kristo authored
AM33xx clocks have now been moved to DT, thus remove the old data file and use the new init code under OMAP clock driver. Signed-off-by:
-
Tero Kristo authored
Initializes clock data from device tree. Signed-off-by:
-
Tero Kristo authored
Initializes clock data from device tree. Signed-off-by:
-
Tero Kristo authored
OMAP4 clocks have now been moved to DT, thus remove the old data file and use the new init code under drivers/clk/omap/clk-44xx.c. Signed-off-by:
-
Tero Kristo authored
clk_init is now separated to a common function which gets called for all SoC:s, which initializes the DT clocks and calls the SoC specific clock init. Signed-off-by:
-
Tero Kristo authored
This patch provides top level functionality for the DT clock initialization. Clock tree is initialized hierarchically starting from IP modules (CM/PRM/PRCM) going down towards individual clock nodes, and finally initializing clockdomains once all the clocks are ready. Signed-off-by:
-
Tero Kristo authored
DT clocks are mostly missing clkdm info now, and this causes an issue with counter32k which makes its slave idlemode wrong and prevents core idle. Fixed by initializing the hwmod clkdm pointers for omap3 also which makes sure the clkdm flag matching logic works properly. This patch also changes the return value for _init_clkdm to 0 for incorrect clkdm_name, as this a warning, not a fatal error. Signed-off-by:
-
Tero Kristo authored
If the main clock for a hwmod is of basic clock type, it is illegal to type cast this to clk_hw_omap and will result in bogus data. Fixed by checking the clock flags before attempting the type cast. Signed-off-by:
-
Tero Kristo authored
Clock nodes shall use the services provided by underlying drivers to access the hardware registers instead of direct memory read/write. Thus, change all the code to use the new omap2_clk_readl / omap2_clk_writel APIs for this. Signed-off-by:
-
Tero Kristo authored
Using indexed memmaps is required for isolating the actual memory access from the clock code. Now, the driver providing the support for the clock IP block provides the low level routines for reading/writing clock registers also. Signed-off-by:
-
Tero Kristo authored
This patch creates a unique node for each clock in the AM43xx power, reset and clock manager (PRCM). Signed-off-by:
-
Tero Kristo authored
AM35xx now uses the clock data from device tree. Most of the data is shared with OMAP3xxx, but as there is some delta, a new base .dtsi file is also created for the SoC. Signed-off-by:
-
Tero Kristo authored
This patch creates a unique node for each clock in the OMAP3 power, reset and clock manager (PRCM). Signed-off-by:
-
Tero Kristo authored
This patch creates a unique node for each clock in the AM33xx power, reset and clock manager (PRCM). Signed-off-by:
-
J Keerthy authored
This patch adds optfclk_pciephy_clk and optfclk_pciephy_div_clk which are used by PCIe phy. It also adds a mux clock to choose the source of optfclk_pciephy_div_clk clock. Signed-off-by:
J Keerthy <j-keerthy@ti.com> Signed-off-by:
-
J Keerthy authored
This patch changes apll_pcie_m2_ck to fixed factor clock as there are no configurable divider associated to m2. Signed-off-by:
-
J Keerthy authored
The patch adds a mux node to choose the parent of apll_pcie_ck node. Signed-off-by:
-
Tero Kristo authored
This patch creates a unique node for each clock in the DRA7 power, reset and clock manager (PRCM). TODO: apll_pcie clock node is still a dummy in this version, and proper support for the APLL should be added. Signed-off-by:
-
Tero Kristo authored
This patch creates a unique node for each clock in the OMAP5 power, reset and clock manager (PRCM). Signed-off-by:
-
Tero Kristo authored
This patch creates a unique node for each clock in the OMAP4 power, reset and clock manager (PRCM). OMAP443x and OMAP446x have slightly different clock tree which is taken into account in the data. Signed-off-by:
-
Tero Kristo authored
clk-43xx.c now contains the clock init functionality for am43xx, including DT clock registration and adding of static clkdev entries. Signed-off-by:
-
Tero Kristo authored
clk-3xxx.c now contains the clock init functionality for omap3, including DT clock registration and adding of static clkdev entries. Signed-off-by:
-
Tero Kristo authored
OMAP3 has interface clocks in addition to functional clocks, which require special handling for the autoidle and idle status register offsets mainly. Signed-off-by:
-
Tero Kristo authored
clk-33xx.c now contains the clock init functionality for am33xx, including DT clock registration and adding of static clkdev entries. This patch also moves the omap2_clk_enable_init_clocks declaration to the driver include, as this is needed by the am33xx clock init code. Signed-off-by:
-
Tero Kristo authored
clk-7xx.c now contains the clock init functionality for dra7, including DT clock registration and adding of static clkdev entries. Signed-off-by:
-
J Keerthy authored
The patch adds support for DRA7 PCIe APLL. The APLL sources the optional functional clocks for PCIe module. APLL stands for Analog PLL. This is different when comapred with DPLL meaning Digital PLL, the phase detection is done using an analog circuit. Signed-off-by:
-
Roger Quadros authored
USB_DPLL must be initialized and locked at boot so that USB modules can work. Signed-off-by:
Roger Quadros <rogerq@ti.com> Signed-off-by:
-
Tero Kristo authored
clk-54xx.c now contains the clock init functionality for omap5, including DT clock registration and adding of static clkdev entries. Signed-off-by:
-
Tero Kristo authored
clk-44xx.c now contains the clock init functionality for omap4, including DT clock registration and adding of static clkdev entries. Signed-off-by:
-
Tero Kristo authored
ti,mux-clock provides now a binding for basic mux support. This is just using the basic clock type. Signed-off-by:
-
Tero Kristo authored
Some OMAP clocks require knowledge about their parent clockdomain for book keeping purposes. This patch creates a new DT binding for TI clockdomains, which act as a collection of device clocks. Clockdomain itself is rather misleading name for the hardware functionality, as at least on OMAP4 / OMAP5 / DRA7 the clockdomains can be collections of either clocks and/or IP blocks, thus idle-domain or such might be more appropriate. For most cases on these SoCs, the kernel doesn't even need the information and the mappings can be ignored. Signed-off-by:
-
Tero Kristo authored
This patch adds support for TI specific gate clocks. These behave as basic gate-clock, but have different ops / hw-ops for controlling the actual gate, for example waiting until the clock is ready. Several sub-types are supported: - ti,gate-clock: basic gate clock with default ops/hwops - ti,clkdm-gate-clock: clockdomain level gate control - ti,dss-gate-clock: gate clock with DSS specific hardware handling - ti,am35xx-gate-clock: gate clock with AM35xx specific hardware handling - ti,hsdiv-gate-clock: gate clock with OMAP36xx hardware errata handling Signed-off-by:
-
